FS#79047 - [prusa-slicer] does not integrate with Printables correctly

Attached to Project: Arch Linux
Opened by Koz Ross (koz) - Monday, 10 July 2023, 19:45 GMT
Last edited by Toolybird (Toolybird) - Wednesday, 19 July 2023, 07:35 GMT
Task Type Bug Report
Category Packages: Extra
Status Closed
Assigned To Sven-Hendrik Haase (Svenstaro)
Bruno Pagani (ArchangeGabriel)
freswa (frederik)
Architecture All
Severity Low
Priority Normal
Reported Version
Due in Version Undecided
Due Date Undecided
Percent Complete 100%
Votes 0
Private No

Details

Description:

The `prusa-slicer` package does not correctly integrate with Printables: all downloads fail when attempting it. This problem does not occur when using releases provided by Prusa themselves on their Github.

Package version: prusa-slicer 2.6.0-3
Upstream bug report: https://github.com/prusa3d/PrusaSlicer/issues/10948

Steps to reproduce:

1. Open PrusaSlicer
2. Go to printables.com in your web browser
3. Pick any model
4. Try to open it using Printables integration
5. Observe that it fails
6. Go to the downloads folder configured in PrusaSlicer and note that you obtained a 0KiB file instead of what you were expecting
This task depends upon

Closed by  Toolybird (Toolybird)
Wednesday, 19 July 2023, 07:35 GMT
Reason for closing:  Fixed
Additional comments about closing:  prusa-slicer 2.6.0-4
Comment by Sven-Hendrik Haase (Svenstaro) - Wednesday, 12 July 2023, 09:03 GMT
I tried this and can reproduce. Sadly, I have no idea how to actually debug this. I'm not seeing any useful logs. Is there a way to enable debug logging somehow?
Comment by Sven-Hendrik Haase (Svenstaro) - Tuesday, 18 July 2023, 06:47 GMT
Ok, I pushed a fixed package to [testing]. Please test and report back.
Comment by Koz Ross (koz) - Tuesday, 18 July 2023, 21:28 GMT
I'm not seeing any package like that in [testing], even with it enabled and having done -Syy.

[koz@Sebastian ~]$ pacman -Ss prusa-slicer
extra/prusa-slicer 2.6.0-3 [installed]
G-code generator for 3D printers (Prusa fork of Slic3r)
Comment by Sven-Hendrik Haase (Svenstaro) - Wednesday, 19 July 2023, 00:22 GMT
If your mirror doesn't have it, you can also get it from here: https://archlinux.org/packages/extra-testing/x86_64/prusa-slicer/
Comment by Koz Ross (koz) - Wednesday, 19 July 2023, 00:53 GMT
I tried getting it from there, but it won't run:

[koz@Sebastian Downloads]$ prusa-slicer
prusa-slicer: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.32' not found (required by prusa-slicer)
Comment by Toolybird (Toolybird) - Wednesday, 19 July 2023, 07:35 GMT
@koz, 2.6.0-4 runs fine. And it also solves the original issue (I just tested in a fresh VM to confirm). That error you're getting suggests something is amiss with your system. If you need help with that, please use the proper support channels (Forum/IRC/Mailing Lists/Reddit/etc).

Loading...