FS#63471 - eGPU usage after power loss
Attached to Project:
Arch Linux
Opened by Valentyn Rosavitskyi (valintinr) - Friday, 16 August 2019, 08:46 GMT
Last edited by freswa (frederik) - Saturday, 22 February 2020, 20:40 GMT
Opened by Valentyn Rosavitskyi (valintinr) - Friday, 16 August 2019, 08:46 GMT
Last edited by freswa (frederik) - Saturday, 22 February 2020, 20:40 GMT
|
Details
Hi, bug created from forum page -
https://bbs.archlinux.org/viewtopic.php?id=248155
Hello, I have Dell XPS 9550 laptop and eGPU AORUS GTX 1080 (for multiple 4k display usage). After power loss external gpu can't be used again untill laptop reboot and seems laptop hang (keyboard didn't worked and any Ctrl-Alt-Fx too). In anotherwords if I disconnect power cord from eGPU while laptop ON the X-server crushed immediately (it's OK) and after plugin power cord back to the eGPU the X-server starting again but no video at any screen connected and laptop don't respond to keyboard. eGPU BIOS and laptop BIOS updated yesterday to the latest versions. Also I have 9560 and 9570 laptops with same behaviour. Just for enshure that eGPU is OK I've tested this under Windows 10 and everything is fine and reboot not required to continiue eGPU usage. Packages [root@xps-arch valintinr]# pacman -Q | grep -e lts -e nvidia -e bolt -e xorg-server-common bolt 0.8-2 linux-lts 4.19.61-1 linux-lts-headers 4.19.61-1 nvidia-lts 1:430.40-1 nvidia-utils 430.40-1 xorg-server-common 1.20.5-2 Good Xorg log (first boot before power lose) - attached file Xorg.0.log.good Bad Xorg log (after power lose) - attached file Xorg.0.log.bad Log after power lose (journalctl -k -b -1), log truncated. Before hard reset I disconnected type-C from eGPU - attached file dmesg.bad Xorg config device section: Section "Device" Identifier "Card0" Driver "nvidia" Option "AllowEmptyInitialConfiguration" Option "AllowExternalGpus" BusID "PCI:11:0:0" EndSection |
This task depends upon
Closed by freswa (frederik)
Saturday, 22 February 2020, 20:40 GMT
Reason for closing: None
Additional comments about closing: This seems pretty stalled to me. If it's still an issue, please fill a re-open request. Thank you :)
Saturday, 22 February 2020, 20:40 GMT
Reason for closing: None
Additional comments about closing: This seems pretty stalled to me. If it's still an issue, please fill a re-open request. Thank you :)