Arch Linux

Here is my dmesg after a suspend/resume cycle:

[ 160.341696] PM: Syncing filesystems ... done.
[ 160.522703] PM: Preparing system for mem sleep
[ 161.799734] Freezing user space processes ... (elapsed 0.003 seconds) done.
[ 161.803107] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 161.804198] PM: Entering mem sleep
[ 161.804249] Suspending console(s) (use no_console_suspend to debug)
[ 161.806816] sd 5:0:0:0: [sdc] Synchronizing SCSI cache
[ 161.806857] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[ 161.806874] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 161.807174] sd 5:0:0:0: [sdc] Stopping disk
[ 161.808483] sd 2:0:0:0: [sda] Stopping disk
[ 161.832996] serial 00:07: disabled
[ 161.833002] serial 00:07: System wakeup disabled by ACPI
[ 161.833022] i8042 kbd 00:06: System wakeup enabled by ACPI
[ 161.887079] sd 4:0:0:0: [sdb] Stopping disk
[ 162.510948] PM: suspend of devices complete after 707.290 msecs
[ 162.511426] PM: late suspend of devices complete after 0.475 msecs
[ 162.512047] r8169 0000:03:00.0: System wakeup enabled by ACPI
[ 162.512147] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 162.512356] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 162.512372] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 162.524279] PM: noirq suspend of devices complete after 12.864 msecs
[ 162.524662] ACPI: Preparing to enter system sleep state S3
[ 162.525137] PM: Saving platform NVS memory
[ 162.526283] Disabling non-boot CPUs ...
[ 162.526341] intel_pstate CPU 1 exiting
[ 162.527565] kvm: disabling virtualization on CPU1
[ 162.527583] smpboot: CPU 1 is now offline
[ 162.528000] intel_pstate CPU 2 exiting
[ 162.529214] kvm: disabling virtualization on CPU2
[ 162.630756] smpboot: CPU 2 is now offline
[ 162.631047] intel_pstate CPU 3 exiting
[ 162.632190] kvm: disabling virtualization on CPU3
[ 162.733989] smpboot: CPU 3 is now offline
[ 162.735427] ACPI: Low-level resume complete
[ 162.735462] PM: Restoring platform NVS memory
[ 162.735908] Enabling non-boot CPUs ...
[ 162.735952] x86: Booting SMP configuration:
[ 162.735952] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 162.747270] kvm: enabling virtualization on CPU1
[ 162.749463] Intel pstate controlling: cpu 1
[ 162.749502] CPU1 is up
[ 162.749514] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 162.760817] kvm: enabling virtualization on CPU2
[ 162.763012] Intel pstate controlling: cpu 2
[ 162.763044] CPU2 is up
[ 162.763055] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 162.774361] kvm: enabling virtualization on CPU3
[ 162.776561] Intel pstate controlling: cpu 3
[ 162.776594] CPU3 is up
[ 162.778925] ACPI: Waking up from system sleep state S3
[ 162.792331] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 162.792506] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 162.792661] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 162.792724] PM: noirq resume of devices complete after 13.503 msecs
[ 162.793012] PM: early resume of devices complete after 0.269 msecs
[ 162.793079] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[ 162.793194] r8169 0000:03:00.0: System wakeup disabled by ACPI
[ 162.793392] i8042 kbd 00:06: System wakeup disabled by ACPI
[ 162.793460] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 162.794029] serial 00:07: activated
[ 162.817423] sd 5:0:0:0: [sdc] Starting disk
[ 162.817425] sd 2:0:0:0: [sda] Starting disk
[ 162.817425] sd 4:0:0:0: [sdb] Starting disk
[ 162.908528] r8169 0000:03:00.0 enp3s0: link down
[ 163.131843] ata10: SATA link down (SStatus 0 SControl 330)
[ 163.131880] ata9: SATA link down (SStatus 0 SControl 330)
[ 163.141813] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 163.144533] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[ 163.144536] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88021604c2f8), AE_NOT_FOUND (20140424/psparse-536)
[ 163.145142] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 163.148362] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[ 163.148365] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88021604c2f8), AE_NOT_FOUND (20140424/psparse-536)
[ 163.148368] ata7.00: configured for UDMA/100
[ 163.150864] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[ 163.150867] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88021604c118), AE_NOT_FOUND (20140424/psparse-536)
[ 163.160854] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[ 163.160856] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88021604c118), AE_NOT_FOUND (20140424/psparse-536)
[ 163.161625] ata3.00: configured for UDMA/133
[ 163.520403] PM: resume of devices complete after 728.096 msecs
[ 163.520529] PM: Finishing wakeup.
[ 163.520530] Restarting tasks ...
[ 163.520696] pci_bus 0000:05: Allocating resources
[ 163.520712] pci 0000:04:00.0: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
[ 163.520714] pci 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
[ 163.520716] pci 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000
[ 163.520718] pci 0000:04:00.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 163.520719] pci 0000:04:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 163.520720] pci 0000:04:00.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 163.520725] pci 0000:04:00.0: BAR 14: assigned [mem 0xe0100000-0xe02fffff]
[ 163.520730] pci 0000:04:00.0: BAR 15: assigned [mem 0xe0300000-0xe04fffff 64bit pref]
[ 163.520733] pci 0000:04:00.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 163.520735] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 163.520738] pci 0000:04:00.0: bridge window [io 0x2000-0x2fff]
[ 163.520745] pci 0000:04:00.0: bridge window [mem 0xe0100000-0xe02fffff]
[ 163.520750] pci 0000:04:00.0: bridge window [mem 0xe0300000-0xe04fffff 64bit pref]
[ 163.525697] done.
[ 164.086052] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 164.187024] r8169 0000:03:00.0 enp3s0: link down
[ 164.187082] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 165.815481] r8169 0000:03:00.0 enp3s0: link up
[ 165.815491] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 167.457645] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 167.462648] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[ 167.462656] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88021604c280), AE_NOT_FOUND (20140424/psparse-536)
[ 167.464441] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[ 167.464450] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88021604c280), AE_NOT_FOUND (20140424/psparse-536)
[ 167.464781] ata6.00: configured for UDMA/133
[ 168.163607] ata5: link is slow to respond, please be patient (ready=0)
[ 171.307221] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 171.308334] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[ 171.308342] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88021604c208), AE_NOT_FOUND (20140424/psparse-536)
[ 171.309712] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[ 171.309719] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88021604c208), AE_NOT_FOUND (20140424/psparse-536)
[ 171.309900] ata5.00: configured for UDMA/133

Here is my lspci for a list of hardware components:

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c4)
00:1c.6 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Z77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 660] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GK106 HDMI Audio Controller (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 09)
04:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03)
06:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9120 SATA 6Gb/s Controller (rev 12)
06:00.1 IDE interface: Marvell Technology Group Ltd. 88SE912x IDE Controller (rev 12)

Here is a screenshot from the graphical error (it should be the default wallpaper) from one of the corners of my desktop:

Taking the shotgun approach and assigning to both the kernel and the driver.

Since you get the same results on linux-lts (and supposedly nvidia-lts right?), I think we can rule out that this is either a kernel or nvidia problem.

agree. Even tried old nvidia driver with same result. Maybe DRM or xserver/wayland?

@Svenstaro, then help me out here. I asked for opinions on #archlinux-bugs and the only response I got was that it was probably the kernel or nvidia.

I have been having (similar) problems since the last week. Lenovo T420 with nvidia NVS4200M (discrete mode), awesome wm.
The problem initially started with gnome-terminal greying/blacking out after suspend/resume or after a display switch (dock/undock). I have also been trying to use autorandr and disper and I initially attributed the problem to be specific to those, but since then, I have tried only using nvidia-settings, but I still see this. I switched away from gnome-terminal to xfce4-terminal and that solved issues with the terminal. But, the problem now shows up with firefox. I suspend/resume or change display configuration and firefox window is greyed out forcing me to kill firefox and start it afresh.
FWIW, I have tried various linux kernel versions, nvidia driver versions as well as nouveau and I still see this. It looks to be related to gtk3, but today, I downgraded gtk3 to 3.12, but the problem continues. I'm wondering if I need to revert a lot more packages.

Last few updates seem to have resolved this problem for me. I am only using nvidia-settings to change display configuration and the system has had no such issues in the last week.

For me the issue still persists. The only thing is that firefox and other apps do not freeze anymore so I can use my system after resuming. After some minutes the graphical erros disappear (live wallpaper gets updated maybe).

Same issue with 3.17.2-1-ARCH, nvidia 343.22-4 (Geforce 550 ti card).

Still have this issue:

nvidia 343.22-5
kernel 3.17.4-1-ARCH

Any new ideas? Never ever had this on any distro...
Has someone tried a clean install?
I already have tried creating a new fresh user - still the same.

Same here,

I have a GTX 640 w/ optimus working in prime mode. Maybe it has some relation

Still crashing on linux-3.18.4-1, nvidia-346.35-4.

Issue has been resolved (for me) with a pacman -Syu a few days ago.

[2015-04-24 10:40] [PACMAN] Running 'pacman -Syu'
[2015-04-24 10:40] [PACMAN] synchronizing package lists
[2015-04-24 10:40] [PACMAN] starting full system upgrade
[2015-04-24 10:42] [ALPM] transaction started
[2015-04-24 10:42] [ALPM] upgraded glibc (2.21-2 -> 2.21-3)
[2015-04-24 10:42] [ALPM] upgraded git (2.3.5-1 -> 2.3.6-1)
[2015-04-24 10:42] [ALPM] upgraded libsystemd (219-5 -> 219-6)
[2015-04-24 10:42] [ALPM] upgraded systemd (219-5 -> 219-6)
[2015-04-24 10:42] [ALPM] upgraded nvidia-utils (346.59-1 -> 349.16-1)
[2015-04-24 10:42] [ALPM-SCRIPTLET] If you run into trouble with CUDA not being available, run nvidia-modprobe first.
[2015-04-24 10:42] [ALPM] upgraded nvidia-libgl (346.59-1 -> 349.16-1)
[2015-04-24 10:42] [ALPM] upgraded hplip (3.15.2-3 -> 3.15.4-1)
[2015-04-24 10:42] [ALPM] upgraded lib32-nvidia-utils (346.59-1 -> 349.16-1)
[2015-04-24 10:42] [ALPM] upgraded lib32-nvidia-libgl (346.59-1 -> 349.16-1)
[2015-04-24 10:42] [ALPM] upgraded libinput (0.13.0-2 -> 0.14.1-1)
[2015-04-24 10:42] [ALPM] upgraded man-pages (3.82-1 -> 3.83-1)
[2015-04-24 10:42] [ALPM] upgraded nvidia (346.59-1 -> 349.16-1)
[2015-04-24 10:42] [ALPM] upgraded systemd-sysvcompat (219-5 -> 219-6)
[2015-04-24 10:42] [ALPM] upgraded tcpdump (4.7.3-2 -> 4.7.4-1)
[2015-04-24 10:42] [ALPM] upgraded xf86-input-void (1.4.0-7 -> 1.4.1-1)
[2015-04-24 10:42] [ALPM] transaction completed