Arch Linux

Hi folks.

I have upgraded kernel this morning and I have run into a little snag.

All the games (latest crossover for Linux / Crossover 10 Games for Linux) are having problems with full screen games.

I am fully upgraded without using testing / unstable sections.

[andrzejl@wishmacer ~]$ pacman -Qi linux
Name : linux
Version : 3.8.3-2
URL : http://www.kernel.org/
Licences : GPL2
Groups : base
Provides : kernel26=3.8.3
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : virtualbox-host-modules
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 63596.00 KiB
Packager : Tobias Powalowski <tpowa@archlinux.org>
Architecture : i686
Build Date : Sun 17 Mar 2013 12:41:32 GMT
Install Date : Mon 18 Mar 2013 12:20:03 GMT
Install Reason : Explicitly installed
Install Script : Yes
Description : The linux kernel and modules

00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Device 006a
Kernel driver in use: i915

I tried changing from sna to the default accel method for this card - no go.

All games look like this:

http://s6.postimage.org/b05uducnk/18032013228.jpg
http://s6.postimage.org/iu6fz8kgg/18032013229.jpg
http://s6.postimage.org/va35szdsg/18032013230.jpg
http://s6.postimage.org/sh9y8ydg0/18032013231.jpg

After downgrading kernel and ONLY kernel and rebooting

http://s6.postimage.org/r8m2nblht/Andrzej_L_Arch_Linux_Snapshot_038.png

the games were back to normal.

http://s6.postimage.org/tku2kwy34/18032013232.jpg
http://s6.postimage.org/ah0r4kl8w/18032013233.jpg
http://s6.postimage.org/ksd3x8cy8/18032013234.jpg
http://s6.postimage.org/o0hla9z80/18032013235.jpg

I have re-downloaded and upgraded the kernel to the 3.8.3-2 version and the games are misbehaving again.

Here is the X log for the 3.8.3 kernel:

[ 19.821]
X.Org X Server 1.13.3
Release Date: 2013-03-07
[ 19.822] X Protocol Version 11, Revision 0
[ 19.822] Build Operating System: Linux 3.8.2-1-ARCH i686
[ 19.822] Current Operating System: Linux wishmacer.loc 3.8.3-2-ARCH #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013 i686
[ 19.822] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1d57d4c0-ecdc-4f85-b997-bbaac4313b16 ro pci=use_crs quiet
[ 19.822] Build Date: 09 March 2013 08:50:11AM
[ 19.822]
[ 19.822] Current version of pixman: 0.28.2
[ 19.822] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.822] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.822] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 18 12:21:56 2013
[ 19.979] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 20.065] (==) No Layout section. Using the first Screen section.
[ 20.065] (==) No screen section available. Using defaults.
[ 20.065] (**) |-->Screen "Default Screen Section" (0)
[ 20.065] (**) | |-->Monitor "<default monitor>"
[ 20.099] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 20.099] (**) | |-->Device "Intel Graphics"
[ 20.099] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 20.099] (==) Automatically adding devices
[ 20.099] (==) Automatically enabling devices
[ 20.099] (==) Automatically adding GPU devices
[ 20.326] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 20.326] Entry deleted from font path.
[ 20.326] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 20.795] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 20.795] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 20.795] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.821] (II) Loader magic: 0x825a620
[ 20.821] (II) Module ABI versions:
[ 20.821] X.Org ANSI C Emulation: 0.4
[ 20.821] X.Org Video Driver: 13.1
[ 20.821] X.Org XInput driver : 18.0
[ 20.821] X.Org Server Extension : 7.0
[ 20.821] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 20.824] (--) PCI:*(0:0:2:0) 8086:2592:1025:006a rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0000000/262144, I/O @ 0x00001800/8
[ 20.825] (--) PCI: (0:0:2:1) 8086:2792:1025:006a rev 3, Mem @ 0x84000000/524288
[ 20.838] Initializing built-in extension Generic Event Extension
[ 20.838] Initializing built-in extension SHAPE
[ 20.838] Initializing built-in extension MIT-SHM
[ 20.838] Initializing built-in extension XInputExtension
[ 20.838] Initializing built-in extension XTEST
[ 20.838] Initializing built-in extension BIG-REQUESTS
[ 20.838] Initializing built-in extension SYNC
[ 20.838] Initializing built-in extension XKEYBOARD
[ 20.838] Initializing built-in extension XC-MISC
[ 20.838] Initializing built-in extension SECURITY
[ 20.838] Initializing built-in extension XINERAMA
[ 20.838] Initializing built-in extension XFIXES
[ 20.838] Initializing built-in extension RENDER
[ 20.838] Initializing built-in extension RANDR
[ 20.838] Initializing built-in extension COMPOSITE
[ 20.838] Initializing built-in extension DAMAGE
[ 20.838] Initializing built-in extension MIT-SCREEN-SAVER
[ 20.839] Initializing built-in extension DOUBLE-BUFFER
[ 20.839] Initializing built-in extension RECORD
[ 20.839] Initializing built-in extension DPMS
[ 20.839] Initializing built-in extension X-Resource
[ 20.839] Initializing built-in extension XVideo
[ 20.839] Initializing built-in extension XVideo-MotionCompensation
[ 20.839] Initializing built-in extension XFree86-VidModeExtension
[ 20.839] Initializing built-in extension XFree86-DGA
[ 20.839] Initializing built-in extension XFree86-DRI
[ 20.839] Initializing built-in extension DRI2
[ 20.839] (II) LoadModule: "glx"
[ 20.894] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.987] (II) Module glx: vendor="X.Org Foundation"
[ 20.987] compiled for 1.13.3, module version = 1.0.0
[ 20.987] ABI class: X.Org Server Extension, version 7.0
[ 20.987] (==) AIGLX enabled
[ 21.013] Loading extension GLX
[ 21.013] (II) LoadModule: "intel"
[ 21.050] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 21.163] (II) Module intel: vendor="X.Org Foundation"
[ 21.163] compiled for 1.13.2.901, module version = 2.21.3
[ 21.163] Module class: X.Org Video Driver
[ 21.163] ABI class: X.Org Video Driver, version 13.1
[ 21.163] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 21.164] (++) using VT number 7

[ 21.404] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 21.404] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 21.404] (==) intel(0): RGB weight 888
[ 21.404] (==) intel(0): Default visual is TrueColor
[ 21.404] (**) intel(0): Option "AccelMethod" "sna"
[ 21.404] (**) intel(0): Option "SwapbuffersWait" "false"
[ 21.404] (--) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
[ 21.405] (**) intel(0): Framebuffer tiled
[ 21.405] (**) intel(0): Pixmaps tiled
[ 21.405] (**) intel(0): "Tear free" disabled
[ 21.405] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 21.405] (II) intel(0): Output LVDS1 has no monitor section
[ 21.411] (--) intel(0): found backlight control interface acer-wmi (type 'platform')
[ 21.607] (II) intel(0): Output VGA1 has no monitor section
[ 21.983] (II) intel(0): Output TV1 has no monitor section
[ 21.983] (II) intel(0): EDID for output LVDS1
[ 21.983] (II) intel(0): Manufacturer: LPL Model: 1246 Serial#: 0
[ 21.983] (II) intel(0): Year: 2005 Week: 0
[ 21.983] (II) intel(0): EDID Version: 1.3
[ 21.983] (II) intel(0): Digital Display Input
[ 21.983] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19
[ 21.983] (II) intel(0): Gamma: 2.20
[ 21.983] (II) intel(0): No DPMS capabilities specified
[ 21.983] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 21.983] (II) intel(0): First detailed timing is preferred mode
[ 21.983] (II) intel(0): redX: 0.581 redY: 0.344 greenX: 0.325 greenY: 0.547
[ 21.984] (II) intel(0): blueX: 0.157 blueY: 0.137 whiteX: 0.312 whiteY: 0.328
[ 21.984] (II) intel(0): Manufacturer's mask: 0
[ 21.984] (II) intel(0): Supported detailed timing:
[ 21.984] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
[ 21.984] (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
[ 21.984] (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 816 v_border: 0
[ 21.984] (II) intel(0): LGPhilipsLCD
[ 21.984] (II) intel(0): LP141WX1-TL03
[ 21.984] (II) intel(0): EDID (in hex):
[ 21.984] (II) intel(0): 00ffffffffffff00320c461200000000
[ 21.984] (II) intel(0): 000f0103801e13780ac4409458538c28
[ 21.984] (II) intel(0): 23505400000001010101010101010101
[ 21.984] (II) intel(0): 010101010101ea1a0080502010301520
[ 21.984] (II) intel(0): 44004bcf100000180000000000000000
[ 21.984] (II) intel(0): 00000000000000000000000000fe004c
[ 21.984] (II) intel(0): 475068696c6970734c43440a000000fe
[ 21.984] (II) intel(0): 004c503134315758312d544c303300e6
[ 21.984] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 21.984] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 21.984] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 21.984] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 21.984] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 21.984] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 21.984] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 21.984] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 21.984] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 21.984] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 21.984] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 21.984] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 21.984] (II) intel(0): Printing probed modes for output LVDS1
[ 21.984] (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 21.984] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 21.984] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 21.984] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 21.984] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 22.172] (II) intel(0): EDID for output VGA1
[ 22.551] (II) intel(0): EDID for output TV1
[ 22.551] (II) intel(0): Output LVDS1 connected
[ 22.551] (II) intel(0): Output VGA1 disconnected
[ 22.551] (II) intel(0): Output TV1 disconnected
[ 22.551] (II) intel(0): Using exact sizes for initial modes
[ 22.551] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 22.551] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 22.551] (==) intel(0): DPI set to (96, 96)
[ 22.551] (II) Loading sub module "dri2"
[ 22.551] (II) LoadModule: "dri2"
[ 22.551] (II) Module "dri2" already built-in
[ 22.551] (==) Depth 24 pixmap format is 32 bpp
[ 22.611] (II) intel(0): SNA initialized with gen3 backend
[ 22.611] (==) intel(0): Backing store disabled
[ 22.611] (==) intel(0): Silken mouse enabled
[ 22.612] (II) intel(0): HW Cursor enabled
[ 22.612] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 22.669] (==) intel(0): DPMS enabled
[ 22.683] (II) intel(0): [DRI2] Setup complete
[ 22.683] (II) intel(0): [DRI2] DRI driver: i915
[ 22.683] (II) intel(0): direct rendering: DRI2 Enabled
[ 22.683] (==) intel(0): hotplug detection: "enabled"
[ 22.683] (--) RandR disabled
[ 22.888] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 22.888] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 22.888] (II) AIGLX: enabled GLX_ARB_create_context
[ 22.888] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 22.888] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 22.888] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 22.888] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 22.888] (II) AIGLX: Loaded and initialized i915
[ 22.888] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 22.889] (II) intel(0): switch to mode 1280x800 on crtc 4 (pipe 1)
[ 22.913] (II) intel(0): Setting screen physical size to 338 x 211
[ 23.416] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 23.416] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.416] (II) LoadModule: "evdev"
[ 23.416] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 23.440] (II) Module evdev: vendor="X.Org Foundation"
[ 23.440] compiled for 1.13.0, module version = 2.7.3
[ 23.440] Module class: X.Org XInput Driver
[ 23.440] ABI class: X.Org XInput driver, version 18.0
[ 23.440] (II) Using input driver 'evdev' for 'Power Button'
[ 23.440] (**) Power Button: always reports core events
[ 23.440] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 23.440] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 23.440] (--) evdev: Power Button: Found keys
[ 23.440] (II) evdev: Power Button: Configuring as keyboard
[ 23.440] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 23.440] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 23.440] (**) Option "xkb_rules" "evdev"
[ 23.440] (**) Option "xkb_model" "evdev"
[ 23.440] (**) Option "xkb_layout" "us"
[ 23.477] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 23.477] (II) No input driver specified, ignoring this device.
[ 23.477] (II) This device may have been added with another device file.
[ 23.478] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 23.478] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 23.478] (II) Using input driver 'evdev' for 'Sleep Button'
[ 23.478] (**) Sleep Button: always reports core events
[ 23.478] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 23.478] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 23.478] (--) evdev: Sleep Button: Found keys
[ 23.478] (II) evdev: Sleep Button: Configuring as keyboard
[ 23.478] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 23.478] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[ 23.478] (**) Option "xkb_rules" "evdev"
[ 23.478] (**) Option "xkb_model" "evdev"
[ 23.478] (**) Option "xkb_layout" "us"
[ 23.479] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 23.479] (II) config/udev: Adding input device SilverCrest OML807 (/dev/input/event5)
[ 23.479] (**) SilverCrest OML807: Applying InputClass "evdev pointer catchall"
[ 23.479] (**) SilverCrest OML807: Applying InputClass "evdev keyboard catchall"
[ 23.479] (II) Using input driver 'evdev' for 'SilverCrest OML807'
[ 23.479] (**) SilverCrest OML807: always reports core events
[ 23.479] (**) evdev: SilverCrest OML807: Device: "/dev/input/event5"
[ 23.480] (--) evdev: SilverCrest OML807: Vendor 0x1bcf Product 0x53a
[ 23.480] (--) evdev: SilverCrest OML807: Found 12 mouse buttons
[ 23.480] (--) evdev: SilverCrest OML807: Found scroll wheel(s)
[ 23.480] (--) evdev: SilverCrest OML807: Found relative axes
[ 23.480] (--) evdev: SilverCrest OML807: Found x and y relative axes
[ 23.480] (--) evdev: SilverCrest OML807: Found absolute axes
[ 23.480] (II) evdev: SilverCrest OML807: Forcing absolute x/y axes to exist.
[ 23.480] (--) evdev: SilverCrest OML807: Found keys
[ 23.480] (II) evdev: SilverCrest OML807: Configuring as mouse
[ 23.480] (II) evdev: SilverCrest OML807: Configuring as keyboard
[ 23.480] (II) evdev: SilverCrest OML807: Adding scrollwheel support
[ 23.480] (**) evdev: SilverCrest OML807: YAxisMapping: buttons 4 and 5
[ 23.480] (**) evdev: SilverCrest OML807: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 23.480] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7.2/1-7.2:1.1/input/input5/event5"
[ 23.480] (II) XINPUT: Adding extended input device "SilverCrest OML807" (type: KEYBOARD, id 8)
[ 23.480] (**) Option "xkb_rules" "evdev"
[ 23.480] (**) Option "xkb_model" "evdev"
[ 23.480] (**) Option "xkb_layout" "us"
[ 23.480] (II) evdev: SilverCrest OML807: initialized for relative axes.
[ 23.480] (WW) evdev: SilverCrest OML807: ignoring absolute axes.
[ 23.481] (**) SilverCrest OML807: (accel) keeping acceleration scheme 1
[ 23.481] (**) SilverCrest OML807: (accel) acceleration profile 0
[ 23.481] (**) SilverCrest OML807: (accel) acceleration factor: 2.000
[ 23.481] (**) SilverCrest OML807: (accel) acceleration threshold: 4
[ 23.481] (II) config/udev: Adding input device SilverCrest OML807 (/dev/input/mouse0)
[ 23.481] (II) No input driver specified, ignoring this device.
[ 23.481] (II) This device may have been added with another device file.
[ 23.482] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 23.482] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 23.482] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 23.482] (**) AT Translated Set 2 keyboard: always reports core events
[ 23.482] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 23.482] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 23.482] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 23.482] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 23.482] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 23.482] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 23.482] (**) Option "xkb_rules" "evdev"
[ 23.482] (**) Option "xkb_model" "evdev"
[ 23.482] (**) Option "xkb_layout" "us"
[ 23.483] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 23.483] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 23.483] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 23.483] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 23.483] (II) LoadModule: "synaptics"
[ 23.483] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 23.497] (II) Module synaptics: vendor="X.Org Foundation"
[ 23.497] compiled for 1.13.2, module version = 1.6.3
[ 23.497] Module class: X.Org XInput Driver
[ 23.497] ABI class: X.Org XInput driver, version 18.0
[ 23.497] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 23.497] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 23.497] (**) Option "Device" "/dev/input/event6"
[ 23.503] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 23.503] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 23.503] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 23.503] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 23.503] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons
[ 23.503] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 23.503] (**) Option "TapButton1" "1"
[ 23.503] (**) Option "TapButton2" "2"
[ 23.503] (**) Option "TapButton3" "3"
[ 23.503] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 23.503] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 23.506] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event6"
[ 23.506] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[ 23.506] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 23.506] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 23.506] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 23.507] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 23.507] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 23.507] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 23.507] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 23.507] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 23.507] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 23.507] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 23.508] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event4)
[ 23.508] (II) No input driver specified, ignoring this device.
[ 23.508] (II) This device may have been added with another device file.
[ 23.508] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 23.508] (II) No input driver specified, ignoring this device.
[ 23.508] (II) This device may have been added with another device file.
[ 54.790] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 54.790] (II) intel(0): Printing DDC gathered Modelines:
[ 54.790] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 108.895] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 108.895] (II) intel(0): Printing DDC gathered Modelines:
[ 108.896] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 109.456] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 109.456] (II) intel(0): Printing DDC gathered Modelines:
[ 109.456] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 110.596] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 110.596] (II) intel(0): Printing DDC gathered Modelines:
[ 110.596] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 111.512] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 111.512] (II) intel(0): Printing DDC gathered Modelines:
[ 111.512] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 112.274] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 112.274] (II) intel(0): Printing DDC gathered Modelines:
[ 112.274] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 113.448] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 113.448] (II) intel(0): Printing DDC gathered Modelines:
[ 113.448] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 113.991] [mi] Increasing EQ size to 512 to prevent dropped events.
[ 115.342] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 115.342] (II) intel(0): Printing DDC gathered Modelines:
[ 115.342] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 116.348] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 116.348] (II) intel(0): Printing DDC gathered Modelines:
[ 116.348] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 117.241] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 117.242] (II) intel(0): Printing DDC gathered Modelines:
[ 117.242] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 117.948] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 117.948] (II) intel(0): Printing DDC gathered Modelines:
[ 117.948] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 118.772] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 118.773] (II) intel(0): Printing DDC gathered Modelines:
[ 118.773] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 120.095] (II) intel(0): switch to mode 800x600 on crtc 4 (pipe 1)
[ 120.492] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 120.492] (II) intel(0): Printing DDC gathered Modelines:
[ 120.492] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 121.069] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 121.069] (II) intel(0): Printing DDC gathered Modelines:
[ 121.069] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 121.616] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 121.616] (II) intel(0): Printing DDC gathered Modelines:
[ 121.616] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 122.197] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 122.197] (II) intel(0): Printing DDC gathered Modelines:
[ 122.197] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 122.745] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 122.746] (II) intel(0): Printing DDC gathered Modelines:
[ 122.746] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 123.300] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 123.300] (II) intel(0): Printing DDC gathered Modelines:
[ 123.300] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 123.865] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 123.866] (II) intel(0): Printing DDC gathered Modelines:
[ 123.866] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 141.489] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 141.489] (II) intel(0): Printing DDC gathered Modelines:
[ 141.489] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 142.540] (II) intel(0): switch to mode 1280x800 on crtc 4 (pipe 1)
[ 142.843] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 142.843] (II) intel(0): Printing DDC gathered Modelines:
[ 142.843] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 143.411] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 143.411] (II) intel(0): Printing DDC gathered Modelines:
[ 143.411] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 143.968] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 143.968] (II) intel(0): Printing DDC gathered Modelines:
[ 143.968] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 144.526] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 144.526] (II) intel(0): Printing DDC gathered Modelines:
[ 144.526] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 145.073] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 145.073] (II) intel(0): Printing DDC gathered Modelines:
[ 145.073] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 145.616] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 145.616] (II) intel(0): Printing DDC gathered Modelines:
[ 145.616] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 146.154] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 146.154] (II) intel(0): Printing DDC gathered Modelines:
[ 146.154] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 146.714] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 146.714] (II) intel(0): Printing DDC gathered Modelines:
[ 146.714] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 147.303] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 147.303] (II) intel(0): Printing DDC gathered Modelines:
[ 147.303] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 147.979] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 147.979] (II) intel(0): Printing DDC gathered Modelines:
[ 147.979] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 220.348] (II) intel(0): EDID vendor "LPL", prod id 4678
[ 220.348] (II) intel(0): Printing DDC gathered Modelines:
[ 220.348] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz eP)
[ 221.988] (II) intel(0): switch to mode 1280x800 on crtc 4 (pipe 1)

I am not sure what other info could be provided. Please do not hesitate to ask additional questions. I will reply as soon as possible.

Regards.

Andrzej