This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.7.3.902 (1.7.4 RC 2) Release Date: 2009-12-26 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.32-ARCH i686 Current Operating System: Linux Yanganto'sMacBook 2.6.32-ARCH #1 SMP PREEMPT Thu Jan 7 22:19:56 UTC 2010 i686 Kernel command line: root=/dev/sda5 ro reboot=pci nomodeset nopat Build Date: 26 December 2009 11:37:45AM Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 13 13:47:32 2010 (II) Loader magic: 0x81e4c60 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (--) using VT number 7 (--) PCI:*(0:0:2:0) 8086:27a2:8086:7270 Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0x90380000/524288, 0x80000000/268435456, 0x90400000/262144, I/O @ 0x000020e0/8 (--) PCI: (0:0:2:1) 8086:27a6:8086:7270 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0x90300000/524288 (==) Using default built-in configuration (30 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default intel Device 0" Driver "intel" EndSection Section "Screen" Identifier "Builtin Default intel Screen 0" Device "Builtin Default intel Device 0" EndSection Section "Device" Identifier "Builtin Default vesa Device 0" Driver "vesa" EndSection Section "Screen" Identifier "Builtin Default vesa Screen 0" Device "Builtin Default vesa Device 0" EndSection Section "Device" Identifier "Builtin Default fbdev Device 0" Driver "fbdev" EndSection Section "Screen" Identifier "Builtin Default fbdev Screen 0" Device "Builtin Default fbdev Device 0" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default intel Screen 0" Screen "Builtin Default vesa Screen 0" Screen "Builtin Default fbdev Screen 0" EndSection (==) --- End of built-in configuration --- (==) ServerLayout "Builtin Default Layout" (**) |-->Screen "Builtin Default intel Screen 0" (0) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default intel Device 0" (==) No monitor specified for screen "Builtin Default intel Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default vesa Screen 0" (1) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default vesa Device 0" (==) No monitor specified for screen "Builtin Default vesa Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default fbdev Screen 0" (2) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default fbdev Device 0" (==) No monitor specified for screen "Builtin Default fbdev Screen 0". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (==) FontPath set to: /usr/share/fonts/misc, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/TTF, /usr/share/fonts/Type1 (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AutoAddDevices. (II) Open ACPI successful (/var/run/acpid.socket) (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.7.1, module version = 2.9.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "vesa" (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.7.0.901, module version = 2.2.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "fbdev" (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.7.0.901, module version = 0.4.1 ABI class: X.Org Video Driver, version 6.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale (II) VESA: driver for VESA chipsets: vesa (II) FBDEV: driver for framebuffer: fbdev (II) Primary Device is: PCI 00@00:02:0 (WW) Falling back to old probe method for vesa (WW) Falling back to old probe method for fbdev (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 0.0.2 ABI class: X.Org Video Driver, version 6.0 (EE) open /dev/fb0: No such file or directory (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 0.1.0 ABI class: X.Org Video Driver, version 6.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) intel(0): Creating default Display subsection in Screen section "Builtin Default intel Screen 0" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM (--) intel(0): Chipset: "945GM" (--) intel(0): Linear framebuffer at 0x80000000 (--) intel(0): IO registers at addr 0x90380000 size 524288 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (II) intel(0): the SDVO device with slave addr 70 is found on DVO 1 port (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA has no monitor section (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): EDID vendor "APP", prod id 40031 xf86TokenToOptinfo: table is NULL (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): I2C bus "SDVOB DDC Bus" initialized. (II) intel(0): Output TMDS-1 has no monitor section (II) intel(0): SDVOB: device VID/DID: 04:AA.03, clock range 25.0MHz - 165.0MHz (II) intel(0): SDVOB: 1 input channel (II) intel(0): SDVOB: TMDS0 output reported xf86TokenToOptinfo: table is NULL (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): Output TV has no monitor section (II) intel(0): Current clock rate multiplier: 1 (II) intel(0): EDID vendor "APP", prod id 40031 (II) intel(0): Output VGA disconnected (II) intel(0): Output LVDS connected (II) intel(0): Output TMDS-1 disconnected (II) intel(0): Output TV disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS using initial mode 1280x800 (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (II) intel(0): detected 256 kB GTT. (II) intel(0): detected 16124 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009 (WW) intel(0): PP_STATUS before: on, ready, sequencing idle (WW) intel(0): PP_STATUS after: on, ready, sequencing on (WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x00000020 (WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000400 (WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x80000203 (WW) intel(0): PIPEASTAT before: status: (WW) intel(0): PIPEASTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS (WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000302 to 0x80000302 (WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS DLINE_COMPARE_STATUS VBLANK_INT_STATUS (WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS DLINE_COMPARE_STATUS VBLANK_INT_STATUS (II) UnloadModule: "vesa" (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) UnloadModule: "fbdev" (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) UnloadModule: "fbdevhw" (II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so (==) Depth 24 pixmap format is 32 bpp (II) intel(0): Kernel reported 478464 total, 1 used (II) intel(0): I830CheckAvailableMemory: 1913852 kB available (II) intel(0): [DRI2] Setup complete (**) intel(0): Framebuffer compression enabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): Current clock rate multiplier: 1 (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000007f000000 physical ) (II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000007f600000 physical ) (II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000007f601000 physical ) (II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000007f60b000 physical ) (II) intel(0): 0x00fbf000: end of stolen memory (II) intel(0): 0x00fbf000-0x0f9f3fff: DRI memory manager (239828 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x00fbf000: start of memory manager (II) intel(0): 0x01000000-0x017fffff: front buffer (8192 kB) X tiled (II) intel(0): 0x0f9f4000: end of memory manager (WW) intel(0): ESR is 0x00000011, page table error, instruction error (WW) intel(0): PGTBL_ER is 0x00000102, host pte data, display B pte (WW) intel(0): Existing errors found in hardware state. (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane B is now disabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane A is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TMDS-1 is connected to pipe none (II) intel(0): Output TV is connected to pipe none (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (==) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: DRI2 Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so (II) GLX: Initialized DRI2 GL provider for screen 0 (II) intel(0): Setting screen physical size to 338 x 211 (II) config/hal: Adding input device Macintosh mouse button emulation (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.3, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event0" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found relative axes (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1 (**) Macintosh mouse button emulation: (accel) acceleration profile 0 (II) Macintosh mouse button emulation: initialized for relative axes. (II) config/hal: Adding input device Apple Computer Apple Internal Keyboard / Trackpad (**) Apple Computer Apple Internal Keyboard / Trackpad: always reports core events (**) Apple Computer Apple Internal Keyboard / Trackpad: Device: "/dev/input/event11" (II) Apple Computer Apple Internal Keyboard / Trackpad: Found keys (II) Apple Computer Apple Internal Keyboard / Trackpad: Configuring as keyboard (II) XINPUT: Adding extended input device "Apple Computer Apple Internal Keyboard / Trackpad" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device appletouch (II) LoadModule: "synaptics" (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.7.3, module version = 1.2.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (II) Synaptics touchpad driver version 1.2.1 (**) Option "Device" "/dev/input/event7" (II) appletouch: x-axis range 0 - 1215 (II) appletouch: y-axis range 0 - 575 (II) appletouch: pressure range 0 - 300 (II) appletouch: finger width range 0 - 0 (II) appletouch: buttons: left double triple (**) Option "MaxTapMove" "0" (**) Option "VertTwoFingerScroll" "true" (**) Option "HorizTwoFingerScroll" "true" (**) Option "TapButton1" "1" (**) Option "TapButton2" "2" (**) Option "TapButton3" "3" (**) Option "MinSpeed" "0.3" (**) Option "MaxSpeed" "10.0" (**) Option "AccelFactor" "0.15" (--) appletouch: touchpad found (**) appletouch: always reports core events (II) XINPUT: Adding extended input device "appletouch" (type: TOUCHPAD) (**) appletouch: (accel) keeping acceleration scheme 1 (**) appletouch: (accel) acceleration profile 0 (--) appletouch: touchpad found (II) config/hal: Adding input device Apple Computer Apple Internal Keyboard / Trackpad (**) Apple Computer Apple Internal Keyboard / Trackpad: always reports core events (**) Apple Computer Apple Internal Keyboard / Trackpad: Device: "/dev/input/event10" (II) Apple Computer Apple Internal Keyboard / Trackpad: Found keys (II) Apple Computer Apple Internal Keyboard / Trackpad: Configuring as keyboard (II) XINPUT: Adding extended input device "Apple Computer Apple Internal Keyboard / Trackpad" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Logitech USB RECEIVER (**) Logitech USB RECEIVER: always reports core events (**) Logitech USB RECEIVER: Device: "/dev/input/event6" (II) Logitech USB RECEIVER: Found 20 mouse buttons (II) Logitech USB RECEIVER: Found scroll wheel(s) (II) Logitech USB RECEIVER: Found relative axes (II) Logitech USB RECEIVER: Found x and y relative axes (II) Logitech USB RECEIVER: Configuring as mouse (**) Logitech USB RECEIVER: YAxisMapping: buttons 4 and 5 (**) Logitech USB RECEIVER: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB RECEIVER" (type: MOUSE) (**) Logitech USB RECEIVER: (accel) keeping acceleration scheme 1 (**) Logitech USB RECEIVER: (accel) acceleration profile 0 (II) Logitech USB RECEIVER: initialized for relative axes. (II) config/hal: Adding input device Sleep Button (**) Sleep Button: always reports core events (**) Sleep Button: Device: "/dev/input/event4" (II) Sleep Button: Found keys (II) Sleep Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event3" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Video Bus (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event1" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event5" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) intel(0): EDID vendor "APP", prod id 40031 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) (II) intel(0): EDID vendor "APP", prod id 40031 (II) intel(0): EDID vendor "APP", prod id 40031 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz) (II) intel(0): EDID vendor "APP", prod id 40031 (II) Macintosh mouse button emulation: Close (II) UnloadModule: "evdev" (II) Apple Computer Apple Internal Keyboard / Trackpad: Close (II) UnloadModule: "evdev" (II) UnloadModule: "synaptics" (II) Apple Computer Apple Internal Keyboard / Trackpad: Close (II) UnloadModule: "evdev" (II) Logitech USB RECEIVER: Close (II) UnloadModule: "evdev" (II) Sleep Button: Close (II) UnloadModule: "evdev" (II) Power Button: Close (II) UnloadModule: "evdev" (II) Video Bus: Close (II) UnloadModule: "evdev" (II) Power Button: Close (II) UnloadModule: "evdev"