Linux version 2.6.23-vanilla (root@seli) (gcc version 4.2.3) #1 SMP PREEMPT Wed Mar 12 14:00:21 CET 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe90000 (usable) BIOS-e820: 000000007fe90000 - 000000007fe98000 (ACPI data) BIOS-e820: 000000007fe98000 - 000000007ff00000 (ACPI NVS) BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 1150MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f71a0 Entering add_active_range(0, 0, 523920) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 523920 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 523920 On node 0 totalpages: 523920 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2301 pages used for memmap HighMem zone: 292243 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI present. ACPI: RSDP 000F70D0, 0014 (r0 PTLTD ) ACPI: RSDT 7FE904EB, 0050 (r1 Sony VAIO 20061219 PTL 0) ACPI: FACP 7FE97C9A, 0084 (r2 Sony VAIO 20061219 PTL 5A) ACPI: DSDT 7FE91DF7, 5EA3 (r1 Sony VAIO 20061219 PTL 20050624) ACPI: FACS 7FE98FC0, 0040 ACPI: APIC 7FE97D1E, 0068 (r1 Sony VAIO 20061219 PTL 5A) ACPI: HPET 7FE97D86, 0038 (r1 Sony VAIO 20061219 PTL 5A) ACPI: MCFG 7FE97DBE, 003C (r1 Sony VAIO 20061219 PTL 5A) ACPI: SLIC 7FE97DFA, 0176 (r1 Sony VAIO 20061219 PTL 1000000) ACPI: APIC 7FE97F70, 0068 (r1 Sony VAIO 20061219 PTL 0) ACPI: BOOT 7FE97FD8, 0028 (r1 Sony VAIO 20061219 PTL 1) ACPI: SSDT 7FE9161D, 07DA (r1 Sony VAIO 20061219 PTL 20050624) ACPI: SSDT 7FE90B16, 028F (r1 Sony VAIO 20061219 PTL 20050624) ACPI: SSDT 7FE90A75, 00A1 (r1 Sony VAIO 20061219 PTL 20050624) ACPI: SSDT 7FE9053B, 053A (r1 Sony VAIO 20061219 PTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: DMI detected: Sony ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000 swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 Built 1 zonelists in Zone order. Total pages: 519827 Kernel command line: root=/dev/sda6 ro quiet mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1662.530 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2071564k/2095680k available (2441k kernel code, 22788k reserved, 814k data, 272k init, 1178176k highmem) virtual kernel memory layout: fixmap : 0xfff80000 - 0xfffff000 ( 508 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0435000 - 0xc0479000 ( 272 kB) .data : 0xc0362689 - 0xc042e1fc ( 814 kB) .text : 0xc0100000 - 0xc0362689 (2441 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 Calibrating delay using timer specific routine.. 3329.82 BogoMIPS (lpj=5546921) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3326.59 BogoMIPS (lpj=5541750) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06 Total of 2 processors activated (6655.41 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 *4 5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default ACPI: RTC can wake from S4 Time: tsc clocksource has been installed. pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved PCI: Failed to allocate mem resource #6:20000@c0000000 for 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: d0000000-d1ffffff PREFETCH window: b0000000-bfffffff PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: c8000000-c9ffffff PREFETCH window: c0000000-c1ffffff PCI: Bridge: 0000:00:1c.1 IO window: 3000-3fff MEM window: ca000000-cbffffff PREFETCH window: c2000000-c3ffffff PCI: Bridge: 0000:00:1c.2 IO window: 4000-4fff MEM window: cc000000-cdffffff PREFETCH window: c4000000-c5ffffff PCI: Bridge: 0000:00:1c.3 IO window: 5000-5fff MEM window: ce000000-cfffffff PREFETCH window: c6000000-c7ffffff PCI: Bus 11, cardbus bridge: 0000:0a:03.0 IO window: 00006000-000060ff IO window: 00006400-000064ff PREFETCH window: 88000000-8bffffff MEM window: 8c000000-8fffffff PCI: Bridge: 0000:00:1e.0 IO window: 6000-6fff MEM window: d2000000-d20fffff PREFETCH window: 88000000-8bffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Enabling device 0000:00:1e.0 (0004 -> 0007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Enabling device 0000:0a:03.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:0a:03.0[A] -> GSI 16 (level, low) -> IRQ 16 NET: Registered protocol family 2 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 1627k freed Simple Boot Flag at 0x36 set to 0x1 apm: BIOS not found. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 272k freed libata version 2.21 loaded. ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14 ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15 ata1.00: ATAPI: PIONEER DVD-RW DVR-K17, 1.00, max UDMA/33 ata1.00: configured for UDMA/33 ata2: port disabled. ignoring. scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-K17 1.00 PQ: 0 ANSI: 5 ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x000118c8 ctl 0x000118ae bmdma 0x000118b0 irq 20 ata4: SATA max UDMA/133 cmd 0x000118c0 ctl 0x000118aa bmdma 0x000118b8 irq 20 ata3.00: ATA-7: TOSHIBA MK1234GSX, AH001A, max UDMA/100 ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/100 scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1234GS AH00 PQ: 0 ANSI: 5 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected sda6 > sd 2:0:0:0: [sda] Attached SCSI disk ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 21, io mem 0xd2304000 usb 2-1: new low speed USB device using uhci_hcd and address 2 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. usb 5-6: new high speed USB device using ehci_hcd and address 3 usb 5-6: configuration #1 chosen from 1 choice usb 2-1: new low speed USB device using uhci_hcd and address 3 usb 2-1: configuration #1 chosen from 1 choice usb 4-2: new full speed USB device using uhci_hcd and address 2 ACPI: SSDT 7FE91300, 0240 (r1 Sony VAIO 20061219 PTL 20050624) ACPI: SSDT 7FE90DA5, 04C9 (r1 Sony VAIO 20061219 PTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7FE91540, 00DD (r1 Sony VAIO 20061219 PTL 20050624) ACPI: SSDT 7FE9126E, 0092 (r1 Sony VAIO 20061219 PTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU1] (supports 8 throttling states) Marking TSC unstable due to: possible TSC halt in C2. Time: hpet clocksource has been installed. usb 4-2: configuration #1 chosen from 1 choice ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 sky2 0000:02:00.0: v1.18 addr 0xc8000000 irq 16 Yukon-FE (0xb7) rev 1 sky2 eth0: addr 00:13:a9:a5:19:4d Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.9 usbcore: registered new interface driver hci_usb ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for ALC262, trying auto-probe from BIOS... ACPI: AC Adapter [ADP1] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Lid Switch as /devices/virtual/input/input2 ACPI: Lid Switch [LID0] input: Power Button (CM) as /devices/virtual/input/input3 ACPI: Power Button (CM) [PWRB] ACPI Exception (thermal-0470): AE_NOT_FOUND, Invalid active threshold [0] [20070126] ACPI: Thermal Zone [TZ00] (58 C) ACPI Exception (thermal-0470): AE_NOT_FOUND, Invalid active threshold [0] [20070126] ACPI: Thermal Zone [TZ01] (58 C) Linux agpgart interface v0.102 sr 0:0:0:0: Attached scsi generic sg0 type 5 sd 2:0:0:0: Attached scsi generic sg1 type 0 intel_rng: FWH not detected usbcore: registered new interface driver hiddev input: Razer Razer Diamonback Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input4 input: USB HID v1.10 Mouse [Razer Razer Diamonback Optical Mouse] on usb-0000:00:1d.1-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Initializing USB Mass Storage driver... scsi4 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k input: PS/2 Mouse as /devices/virtual/input/input5 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 20 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input6 input: Video Bus as /devices/virtual/input/input7 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Yenta: CardBus bridge found at 0000:0a:03.0 [104d:820f] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:0a:03.0, mfunc 0x01121b22, devctl 0x64 sony-laptop: Sony Notebook Control Driver v0.5. input: Sony Vaio Keys as /devices/virtual/input/input8 input: Sony Vaio Jogdial as /devices/virtual/input/input9 sony-laptop: detected Sony Vaio C Series Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff cs: IO port probe 0x6000-0x6fff: clean. pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff PCI: Enabling device 0000:0a:03.2 (0000 -> 0002) ACPI: PCI Interrupt 0000:0a:03.2[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Enabling device 0000:0a:03.1 (0000 -> 0002) ACPI: PCI Interrupt 0000:0a:03.1[A] -> GSI 16 (level, low) -> IRQ 16 firewire_ohci: Added fw-ohci device 0000:0a:03.1, OHCI version 1.10 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. firewire_core: created new fw device fw0 (0 config rom retries, S400) EXT3 FS on sda6, internal journal fuse init (API version 7.8) Adding 1020088k swap on /dev/sda5. Priority:-1 extents:1 across:1020088k scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0 sd 4:0:0:0: [sdb] Attached SCSI removable disk sd 4:0:0:0: Attached scsi generic sg2 type 0 usb-storage: device scan complete sky2 eth0: enabling interface Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized