ArchMain Linux version 2.6.24-ARCH (root@T-POWA-LX) (gcc version 4.2.2) #1 SMP PREEMPT Sat Jan 26 13:43:22 CET 2008

.....

usb 8-2: new high speed USB device using ehci_hcd and address 2
usb 8-2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 8-2: reset high speed USB device using ehci_hcd and address 2
scsi 6:0:0:0: Direct-Access     NIKON    D50              1.00 PQ: 0 ANSI: 2
sd 6:0:0:0: [sdd] 3970048 512-byte hardware sectors (2033 MB)
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 0f 00 00 00
sd 6:0:0:0: [sdd] Assuming drive cache: write through
sd 6:0:0:0: [sdd] 3970048 512-byte hardware sectors (2033 MB)
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 0f 00 00 00
sd 6:0:0:0: [sdd] Assuming drive cache: write through
 sdd:<6>usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 0
Buffer I/O error on device sdd, logical block 0
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 0
Buffer I/O error on device sdd, logical block 0
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 0
Buffer I/O error on device sdd, logical block 0
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 0
Buffer I/O error on device sdd, logical block 0
 unable to read partition table
sd 6:0:0:0: [sdd] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg4 type 0
usb-storage: device scan complete
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 3969920
Buffer I/O error on device sdd, logical block 496240
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 3969920
Buffer I/O error on device sdd, logical block 496240
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 3970032
Buffer I/O error on device sdd, logical block 496254
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 3970032
Buffer I/O error on device sdd, logical block 496254
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 0
Buffer I/O error on device sdd, logical block 0
Buffer I/O error on device sdd, logical block 1
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 0
Buffer I/O error on device sdd, logical block 0
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 0
Buffer I/O error on device sdd, logical block 0
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 3970040
Buffer I/O error on device sdd, logical block 496255
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 3970040
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 3970040
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 3970040
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 3970040
printk: 3 messages suppressed.
Buffer I/O error on device sdd, logical block 496255
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 3970040
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 3969984
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 3970032
printk: 2 messages suppressed.
Buffer I/O error on device sdd, logical block 496254
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 3970040
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 3970040
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 0
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 0
printk: 3 messages suppressed.
Buffer I/O error on device sdd, logical block 0
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 0
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 0
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 3969920
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 3969920
printk: 3 messages suppressed.
Buffer I/O error on device sdd, logical block 496240
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 3970032
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 3970032
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 0
printk: 2 messages suppressed.
Buffer I/O error on device sdd, logical block 0
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 0
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 0
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
usb 8-2: reset high speed USB device using ehci_hcd and address 2
sd 6:0:0:0: [sdd] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdd, sector 3970040