Arch Linux

Description:
System freezes (X, console, everything) from time to time (and then goes back to work) when using madwifi version 0.9.3.1.99, works fine on previous version: 0.9.3-4. To me it seems that system freezes when there are problems with association to AP (low signal).

Additional info:
madwifi-0.9.3.1.99 - does not work correctly
madwifi-0.9.3-4 - works fine

Card: PCMCIA: PLANET WL3560 (802.11g)

uname -a:
----8<--------8<--------8<--------
Linux asus 2.6.22-ARCH #1 SMP PREEMPT Thu Aug 2 18:27:37 CEST 2007 i686 mobile AMD Athlon(tm) XP-M 2800+ AuthenticAMD GNU/Linux
----8<--------8<--------8<--------

lspci:
----8<--------8<--------8<--------
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 746 Host (rev 10)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90)
00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev b8)
00:0a.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C551 IEEE 1394 Controller
01:00.0 VGA compatible controller: ATI Technologies Inc M9+ 5C61 [Radeon Mobility 9200 (AGP)] (rev 01)
02:00.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
----8<--------8<--------8<--------

dmesg:
----8<--------8<--------8<--------
Linux version 2.6.22-ARCH (root@Wohnung) (gcc version 4.2.1 20070704 (prerelease)) #1 SMP PREEMPT Thu Aug 2 18:27:37 CEST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002ffd0000 (usable)
BIOS-e820: 000000002ffd0000 - 000000002ffdf000 (ACPI data)
BIOS-e820: 000000002ffdf000 - 0000000030000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Malformed early option 'acpi'
0MB HIGHMEM available.
767MB LOWMEM available.
Entering add_active_range(0, 0, 196560) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 196560
HighMem 196560 -> 196560
early_node_map[1] active PFN ranges
0: 0 -> 196560
On node 0 totalpages: 196560
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1503 pages used for memmap
Normal zone: 190961 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F62D0, 0014 (r0 ACPIAM)
ACPI: RSDT 2FFD0000, 002C (r1 A M I OEMRSDT 7000401 MSFT 97)
ACPI: FACP 2FFD0200, 0081 (r2 A M I OEMFACP 7000401 MSFT 97)
ACPI: DSDT 2FFD0390, 5C07 (r1 1ABSU 1ABSU001 1 INTL 2002026)
ACPI: FACS 2FFDF000, 0040
ACPI: OEMB 2FFDF040, 0125 (r1 A M I AMI_OEM 7000401 MSFT 97)
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 40000000 (gap: 30000000:cff80000)
Built 1 zonelists. Total pages: 195025
Kernel command line: root=/dev/hda2 acpi=on ro vga=791 video=vesafb:ypan,mtrr resume=/dev/hda1 quiet selinux=0 enforcing=0
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0160f000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2133.500 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 774308k/786240k available (2392k kernel code, 11284k reserved, 787k data, 304k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff82000 - 0xfffff000 ( 500 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
lowmem : 0xc0000000 - 0xeffd0000 ( 767 MB)
.init : 0xc0421000 - 0xc046d000 ( 304 kB)
.data : 0xc03561df - 0xc041b1bc ( 787 kB)
.text : 0xc0100000 - 0xc03561df (2392 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4269.02 BogoMIPS (lpj=7113643)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ACPI: setting ELCR to 0200 (from 8410)
CPU0: AMD mobile AMD Athlon(tm) XP-M 2800+ stepping 00
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Enabling SiS 96x SMBus.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 10 11 12 14)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 11 12 14 *15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
pnp: 00:06: iomem range 0xfee00000-0xfee00fff has been reserved
pnp: 00:06: iomem range 0xfff80000-0xffffffff could not be reserved
pnp: 00:06: iomem range 0xffe80000-0xffefffff has been reserved
pnp: 00:09: iomem range 0x0-0x0 could not be reserved
pnp: 00:09: iomem range 0x0-0x0 could not be reserved
pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0d: iomem range 0x100000-0x2fffffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: fea00000-feafffff
PREFETCH window: bff00000-cfefffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
IO window: 00001000-000010ff
IO window: 00001400-000014ff
PREFETCH window: 40000000-43ffffff
MEM window: 44000000-47ffffff
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:0a.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 482k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
vesafb: framebuffer at 0xc0000000, mapped to 0xf0880000, using 3072k, total 32768k
vesafb: mode is 1024x768x16, linelength=2048, pages=20
vesafb: protected mode interface info at c000:5825
vesafb: pmi: set display start = c00c58b9, set palette = c00c5905
vesafb: pmi: ports = d010 d016 d054 d038 d03c d05c d000 d004 d0b0 d0b2 d0b4
vesafb: scrolling: ypan using protected mode interface, yres_virtual=1536
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 4
PCI: setting IRQ 4 as level-triggered
ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKC] -> GSI 4 (level, low) -> IRQ 4
ACPI: PCI interrupt for device 0000:00:02.6 disabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 304k freed
input: AT Translated Set 2 keyboard as /class/input/input1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: SAMSUNG MP0804H, ATA DISK drive
hdb: UJDA760 DVD/CDRW, ATAPI CD/DVD-ROM drive
hda: selected mode 0x45
hdb: selected mode 0x42
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 512KiB
hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input3
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LIDD]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PWRB]
No dock devices found.
Asus Laptop ACPI Extras version 0.30
Error calling BSTS
A2D model detected, supported
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2])
Marking TSC unstable due to: possible TSC halt in C2.
Time: acpi_pm clocksource has been installed.
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
powernow: SGTC: 13333
powernow: Minimum speed 400 MHz. Maximum speed 2133 MHz.
NET: Registered protocol family 23
IrCOMM protocol (Dag Brattli)
fuse init (API version 7.8)
QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard
KQEMU installed, max_locked_mem=387684kB.
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
input: PSX DDR controller as /class/input/input6
ACPI: Thermal Zone [THRM] (67 C)
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected SiS chipset - id:1862
agpgart: AGP aperture is 64M @ 0xd0000000
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 15
PCI: setting IRQ 15 as level-triggered
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 15 (level, low) -> IRQ 15
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: irq 15, io mem 0xfebfd000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 15
ACPI: PCI Interrupt 0000:00:03.1[B] -> Link [LNKF] -> GSI 15 (level, low) -> IRQ 15
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.1: irq 15, io mem 0xfebfe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 15
ACPI: PCI Interrupt 0000:00:03.3[D] -> Link [LNKH] -> GSI 15 (level, low) -> IRQ 15
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
PCI: cache line size of 64 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: irq 15, io mem 0xfebff000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
usb 1-1: new low speed USB device using ohci_hcd and address 2
ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKC] -> GSI 4 (level, low) -> IRQ 4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
MC'97 1 converters and GPIO not ready (0xff00)
ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 4 (level, low) -> IRQ 4
usb 1-1: device not accepting address 2, error -62
usb 1-1: new low speed USB device using ohci_hcd and address 4
sis900.c: v1.08.10 Apr. 2 2006
usb 1-1: configuration #1 chosen from 1 choice
intel8x0_measure_ac97_clock: measured 50794 usecs
intel8x0: clocking to 48000
Yenta: CardBus bridge found at 0000:00:0a.0 [1043:1814]
Yenta: ISA IRQ mask 0x0008, PCI irq 10
Socket status: 30000820
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xee00, IRQ 10, 00:11:2f:f8:d0:37.
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
firewire_ohci: Added fw-ohci device 0000:00:0a.1, OHCI version 1.0
Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
wbsd: Unable to allocate DMA 3. Falling back on FIFO.
input: SynPS/2 Synaptics TouchPad as /class/input/input7
mmc0: W83L51xD id 7112 at 0x520 irq 5 FIFO PnP
firewire_core: created new fw device fw0 (0 config rom retries)
pccard: CardBus card inserted into slot 0
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
ppdev: user-space parallel port driver
input: PC Speaker as /class/input/input8
cs: IO port probe 0x100-0x3af: excluding 0x2f8-0x2ff
cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: excluding 0x828-0x84f 0x858-0x86f 0x878-0x87f
cs: IO port probe 0xc00-0xcf7: excluding 0xc80-0xc87
cs: IO port probe 0xa00-0xaff: clean.
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
wlan: 0.8.4.2 (0.9.4)
ath_pci: 0.9.4.5 (0.9.4)
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
ath_pci: switching rfkill capability off
ath_rate_sample: 1.2 (0.9.4)
ath_pci: switching per-packet transmit power control off
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 7.9 phy 4.5 radio 5.6
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
usbcore: registered new interface driver hiddev
wifi0: Atheros 5212: mem=0x44000000, irq=10
input: Logitech Optical USB Mouse as /class/input/input9
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:03.0-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
EXT3 FS on hda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
Adding 393552k swap on /dev/hda1. Priority:-1 extents:1 across:393552k
Capability LSM initialized
eth0: Media Link Off
hda: selected mode 0x45
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
Mobile IPv6
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[drm] Initialized radeon 1.27.0 20060524 on minor 0
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: SiS delay workaround: giving bridge time to recover.
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[drm] Setting GART location based on new memory map
[drm] Loading R200 Microcode
[drm] writeback test succeeded in 1 usecs
ath0: no IPv6 routers present
----8<--------8<--------8<--------

Steps to reproduce:

Install madwifi-0.9.3.99-1 and try to associate to any managed network (/etc/rc.d/service network start).