Please read this before reporting a bug:
https://wiki.archlinux.org/title/Bug_reporting_guidelines
Do NOT report bugs when a package is just outdated, or it is in the AUR. Use the 'flag out of date' link on the package page, or the Mailing List.
REPEAT: Do NOT report bugs for outdated packages!
https://wiki.archlinux.org/title/Bug_reporting_guidelines
Do NOT report bugs when a package is just outdated, or it is in the AUR. Use the 'flag out of date' link on the package page, or the Mailing List.
REPEAT: Do NOT report bugs for outdated packages!
FS#7260 - /proc/acpi/button empty on kernel 2.6.21
Attached to Project:
Arch Linux
Opened by Denis Grelich (DenisG) - Thursday, 24 May 2007, 19:30 GMT
Last edited by Tobias Powalowski (tpowa) - Friday, 22 June 2007, 15:23 GMT
Opened by Denis Grelich (DenisG) - Thursday, 24 May 2007, 19:30 GMT
Last edited by Tobias Powalowski (tpowa) - Friday, 22 June 2007, 15:23 GMT
|
DetailsAfter a full system upgrade, updating the kernel from 2.6.20.10-1 (worked on earlier kernels, too) to 2.6.21.1-8, battery status stopped working. /proc/acpi/button stays empty, module "battery" is loaded on boot though. Loading the acpi, battery or ibm_acpi modules by hand didn't help.
My system is a ThinkPad T30. dmesg says: Linux version 2.6.21-ARCH (root@Wohnung) (gcc version 4.1.2 20070423 (prerelease)) #1 SMP PREEMPT Sun May 6 18:33:47 CEST 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000d2000 size: 0000000000002000 end: 00000000000d4000 type: 2 copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000001fe60000 end: 000000001ff60000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000001ff60000 size: 000000000001a000 end: 000000001ff7a000 type: 3 copy_e820_map() start: 000000001ff7a000 size: 0000000000002000 end: 000000001ff7c000 type: 4 copy_e820_map() start: 000000001ff7c000 size: 0000000000084000 end: 0000000020000000 type: 2 copy_e820_map() start: 00000000ff800000 size: 0000000000800000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) BIOS-e820: 000000001ff60000 - 000000001ff7a000 (ACPI data) BIOS-e820: 000000001ff7a000 - 000000001ff7c000 (ACPI NVS) BIOS-e820: 000000001ff7c000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. Entering add_active_range(0, 0, 130912) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 130912 HighMem 130912 -> 130912 early_node_map[1] active PFN ranges 0: 0 -> 130912 On node 0 totalpages: 130912 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 990 pages used for memmap Normal zone: 125826 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI present. ACPI: RSDP 000F7000, 0024 (r2 IBM ) ACPI: XSDT 1FF6F3A4, 004C (r1 IBM TP-1I 2022 LTP 0) ACPI: FACP 1FF6F3F0, 0081 (r1 IBM TP-1I 2022 IBM 1) ACPI: DSDT 1FF6F4D7, AA7E (r1 IBM TP-1I 2022 MSFT 100000D) ACPI: FACS 1FF7B000, 0040 ACPI: SSDT 1FF6F4A4, 0033 (r1 IBM TP-1I 2022 MSFT 100000D) ACPI: ECDT 1FF79F55, 0051 (r1 IBM TP-1I 2022 IBM 1) ACPI: TCPA 1FF79FA6, 0032 (r1 IBM TP-1I 2022 PTL 1) ACPI: BOOT 1FF79FD8, 0028 (r1 IBM TP-1I 2022 LTP 1) ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 30000000 (gap: 20000000:df800000) Built 1 zonelists. Total pages: 129890 Kernel command line: root=/dev/mapper/vg-root ro vga=773 cryptdevice=/dev/sda2:disk Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (0140b000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1199.026 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 512160k/523648k available (2320k kernel code, 10904k reserved, 763k data, 268k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff83000 - 0xfffff000 ( 496 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) lowmem : 0xc0000000 - 0xdff60000 ( 511 MB) .init : 0xc0409000 - 0xc044c000 ( 268 kB) .data : 0xc03442e1 - 0xc04032ac ( 763 kB) .text : 0xc0100000 - 0xc03442e1 (2320 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2401.27 BogoMIPS (lpj=4802552) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled CPU: After all inits, caps: bfebf9ff 00000000 00000000 00003080 00000400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed Early unpacking initramfs... done ACPI: Core revision 20070126 ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. ACPI: setting ELCR to 0200 (from 0800) CPU0: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz stepping 07 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8 PCI: Using configuration type 1 Setting up standard PCI resources ACPI Exception (ec-0915): AE_NOT_FOUND, Could not use ECDT [20070126] ACPI Error (evregion-0317): No handler for Region [ECOR] (dfa9272c) [EmbeddedControl] [20070126] ACPI Error (exfldio-0289): Region EmbeddedControl(3) has no handler [20070126] ACPI Exception (dswexec-0462): AE_NOT_EXIST, While resolving operands for [OpcodeName unavailable] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC_.FDC_._INI] (Node dfa9e888), AE_NOT_EXIST ACPI Error (evregion-0317): No handler for Region [ECOR] (dfa9272c) [EmbeddedControl] [20070126] ACPI Error (exfldio-0289): Region EmbeddedControl(3) has no handler [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__._INI] (Node dfa9ab6c), AE_NOT_EXIST ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI Error (evregion-0317): No handler for Region [ECOR] (dfa9272c) [EmbeddedControl] [20070126] ACPI Error (exfldio-0289): Region EmbeddedControl(3) has no handler [20070126] ACPI Exception (dswexec-0462): AE_NOT_EXIST, While resolving operands for [OpcodeName unavailable] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node dfa9aedc), AE_NOT_EXIST ACPI Error (evregion-0317): No handler for Region [ECOR] (dfa9272c) [EmbeddedControl] [20070126] ACPI Error (exfldio-0289): Region EmbeddedControl(3) has no handler [20070126] ACPI Exception (dswexec-0462): AE_NOT_EXIST, While resolving operands for [OpcodeName unavailable] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node dfa9adec), AE_NOT_EXIST ACPI Error (evregion-0317): No handler for Region [ECOR] (dfa9272c) [EmbeddedControl] [20070126] ACPI Error (exfldio-0289): Region EmbeddedControl(3) has no handler [20070126] ACPI Exception (dswexec-0462): AE_NOT_EXIST, While resolving operands for [OpcodeName unavailable] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BGID] (Node dfa9e950), AE_NOT_EXIST ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BINI] (Node dfa9e964), AE_NOT_EXIST ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node dfa9e98c), AE_NOT_EXIST ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node dfa9e8c4), AE_NOT_EXIST ACPI Error (evregion-0317): No handler for Region [ECOR] (dfa9272c) [EmbeddedControl] [20070126] ACPI Error (exfldio-0289): Region EmbeddedControl(3) has no handler [20070126] ACPI Exception (dswexec-0462): AE_NOT_EXIST, While resolving operands for [OpcodeName unavailable] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BGID] (Node dfa9e950), AE_NOT_EXIST ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BINI] (Node dfa9e964), AE_NOT_EXIST ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node dfa9e98c), AE_NOT_EXIST ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.USB0.URTH.UNST._STA] (Node dfa9e338), AE_NOT_EXIST ACPI Error (evregion-0317): No handler for Region [ECOR] (dfa9272c) [EmbeddedControl] [20070126] ACPI Error (exfldio-0289): Region EmbeddedControl(3) has no handler [20070126] ACPI Exception (dswexec-0462): AE_NOT_EXIST, While resolving operands for [OpcodeName unavailable] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BGID] (Node dfa9e950), AE_NOT_EXIST ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BINI] (Node dfa9e964), AE_NOT_EXIST ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node dfa9e98c), AE_NOT_EXIST ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.NEST._STA] (Node dfa9e7c0), AE_NOT_EXIST ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO Boot video device is 0000:01:00.0 PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: Power Resource [PUBS] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: d0100000-d01fffff PREFETCH window: e8000000-efffffff PCI: Bus 3, cardbus bridge: 0000:02:00.0 IO window: 00003000-000030ff IO window: 00003400-000034ff PREFETCH window: f0000000-f3ffffff MEM window: d4000000-d7ffffff PCI: Bus 7, cardbus bridge: 0000:02:00.1 IO window: 00003800-000038ff IO window: 00003c00-00003cff PREFETCH window: f4000000-f7ffffff MEM window: d8000000-dbffffff PCI: Bridge: 0000:00:1e.0 IO window: 3000-7fff MEM window: d0200000-dfffffff PREFETCH window: f0000000-f7ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 16384 (order: 5, 196608 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered checking if image is initramfs... it is Switched to high resolution mode on CPU 0 Freeing initrd memory: 2678k freed Simple Boot Flag at 0x35 set to 0x1 IBM machine detected. Enabling interrupts during APM calls. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) vesafb: framebuffer at 0xe8000000, mapped to 0xe0880000, using 1536k, total 16320k vesafb: mode is 1024x768x8, linelength=1024, pages=20 vesafb: protected mode interface info at c000:5613 vesafb: pmi: set display start = c00c56a7, set palette = c00c56f3 vesafb: pmi: ports = 2010 2016 2054 2038 203c 205c 2000 2004 20b0 20b2 20b4 vesafb: scrolling: redraw vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled pnp: Device 00:0a activated. 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 268k freed libata version 2.20 loaded. ata_piix 0000:00:1f.1: version 2.10ac1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15 scsi0 : ata_piix ata1.00: ATA-6: WDC WD400VE-00HDT0, 09.07D09, max UDMA/100 ata1.00: 78140160 sectors, multi 16: LBA ata1.00: configured for UDMA/100 scsi1 : ata_piix ata2.00: ATAPI, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA WDC WD400VE-00HD 09.0 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4240N 0211 PQ: 0 ANSI: 5 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) sda: Write Protect is off usb 2-1: new low speed USB device using uhci_hcd and address 2 sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 usb 2-1: configuration #1 chosen from 1 choice usb 2-2: new full speed USB device using uhci_hcd and address 3 usb 2-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1 input: C-Media USB Headphone Set as /class/input/input3 input: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:1d.1-2 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com ReiserFS: dm-1: found reiserfs format "3.6" with standard journal ReiserFS: dm-1: using ordered data mode ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-1: checking transaction log (dm-1) ReiserFS: dm-1: Using r5 hash to sort names e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 e100: eth0: e100_probe: addr 0xd0200000, irq 11, MAC addr 00:09:6B:06:91:77 eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others ibm_acpi: IBM ThinkPad ACPI Extras v0.13 ibm_acpi: http://ibm-acpi.sf.net/ ibm_acpi: bay device not present ibm_acpi: disabling subdriver bay ACPI: AC Adapter [AC] (off-line) input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input5 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input6 ACPI: Sleep Button (CM) [SLPB] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU] (supports 8 throttling states) ACPI: Thermal Zone [THM0] (43 C) Time: acpi_pm clocksource has been installed. Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel i845 Chipset. agpgart: AGP aperture is 64M @ 0xe0000000 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 input: PC Speaker as /class/input/input7 intel_rng: FWH not detected Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input8 parport: PnPBIOS parport detected. parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] usbcore: registered new interface driver snd-usb-audio PPP generic driver version 2.4.2 Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k Yenta: ISA IRQ mask 0x0438, PCI irq 11 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff cs: IO port probe 0x3000-0x7fff: clean. pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff Yenta: CardBus bridge found at 0000:02:00.1 [1014:0512] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64 Yenta: ISA IRQ mask 0x0438, PCI irq 11 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff cs: IO port probe 0x3000-0x7fff: clean. pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff lp0: using parport0 (interrupt-driven). NET: Registered protocol family 23 pnp: Device 00:0c activated. nsc-ircc, chip->init nsc-ircc, Found chip at base=0x02e nsc-ircc, driver loaded (Dag Brattli) IrDA: Registered device irda0 nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100 ppdev: user-space parallel port driver IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input9 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. ReiserFS: dm-2: found reiserfs format "3.6" with standard journal ReiserFS: dm-2: using ordered data mode ReiserFS: dm-2: journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-2: checking transaction log (dm-2) ReiserFS: dm-2: Using r5 hash to sort names Adding 2256888k swap on /dev/mapper/vg-swap. Priority:-1 extents:1 across:2256888k e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized radeon 1.25.0 20060524 on minor 0 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [drm] Setting GART location based on new memory map [drm] writeback test succeeded in 1 usecs NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 eth0: no IPv6 routers present Clocksource tsc unstable (delta = 156605170 ns) |
This task depends upon
Dell Laptop - Inspiron 8000
Archlinux 2007.05 (Duke) SysInfo: Linux 2.6.21.3-1 | Pentium III (Coppermine) 996.750 MHz | Bogomips: 1994.26 | Mem: 178/504M | Screen: nVidia Corporation NV11 [GeForce2 Go] (rev b2) @ 1600x1200 (32 bpp)
Gehenna ~ ]# lsmod
Module Size Used by
ipv6 252864 8
ehci_hcd 29964 0
ohci_hcd 18948 0
ext2 57352 1
snd_seq_oss 29184 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 46928 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
snd_maestro3 21028 1
snd_pcm_oss 39072 0
snd_mixer_oss 14464 1 snd_pcm_oss
snd_ac97_codec 95396 1 snd_maestro3
usbhid 34592 0
hid 25088 1 usbhid
ff_memless 5128 1 usbhid
ac97_bus 2432 1 snd_ac97_codec
snd_pcm 68740 3 snd_maestro3,snd_pcm_oss,snd_ac97_codec
snd_timer 19204 2 snd_seq,snd_pcm
snd_page_alloc 7944 1 snd_pcm
snd 43876 11 snd_seq_oss,snd_seq,snd_seq_device,snd_maestro3,snd_pcm_oss,snd_mixer_oss,snd_ac97_codec,snd_pcm,snd_timer
soundcore 6496 1 snd
serial_cs 20228 1
eth1394 16772 0
pcmcia 31404 1 serial_cs
joydev 8384 0
yenta_socket 23564 4
rsrc_nonstatic 11264 1 yenta_socket
pcmcia_core 33176 4 serial_cs,pcmcia,yenta_socket,rsrc_nonstatic
ohci1394 31920 0
ieee1394 84056 2 eth1394,ohci1394
irda 113336 0
crc_ccitt 2304 1 irda
rtc_sysfs 3072 0
rtc_proc 3844 0
rtc_dev 6664 0
rtc_core 7556 3 rtc_sysfs,rtc_proc,rtc_dev
rtc_lib 3456 2 rtc_sysfs,rtc_core
ppdev 7556 0
lp 9604 0
parport_pc 35940 1
parport 31176 3 ppdev,lp,parport_pc
ppp_generic 23444 0
slhc 6272 1 ppp_generic
uhci_hcd 21520 0
psmouse 35336 0
serio_raw 5636 0
tsdev 6336 0
intel_agp 21276 1
agpgart 26200 1 intel_agp
shpchp 29588 0
pci_hotplug 27976 1 shpchp
evdev 8192 0
pcspkr 2816 0
fan 3716 0
button 6032 0
battery 8324 0
ac 3972 0
eepro100 27152 0
mii 4992 1 eepro100
usbcore 112392 5 ehci_hcd,ohci_hcd,usbhid,uhci_hcd
ext3 119176 1
jbd 55336 1 ext3
mbcache 7044 2 ext2,ext3
ide_cd 35744 0
cdrom 34464 1 ide_cd
ide_floppy 15488 0
generic 4740 0 [permanent]
ata_piix 11908 0
libata 94228 1 ata_piix
ide_disk 13312 4
piix 9348 0 [permanent]
ide_core 108744 5 ide_cd,ide_floppy,generic,ide_disk,piix
Portion of kernel log:
%< cut >%
May 29 10:16:32 Gehenna ACPI: AC Adapter [AC] (on-line)
May 29 10:16:32 Gehenna ACPI: Battery Slot [BAT0] (battery absent)
May 29 10:16:32 Gehenna ACPI: Battery Slot [BAT1] (battery present)
May 29 10:16:32 Gehenna input: Lid Switch as /class/input/input2
May 29 10:16:32 Gehenna ACPI: Lid Switch [LID]
May 29 10:16:32 Gehenna input: Power Button (CM) as /class/input/input3
May 29 10:16:32 Gehenna ACPI: Power Button (CM) [PBTN]
May 29 10:16:32 Gehenna input: Sleep Button (CM) as /class/input/input4
May 29 10:16:32 Gehenna ACPI: Sleep Button (CM) [SBTN]
May 29 10:16:32 Gehenna hdc: No disk in drive
May 29 10:16:32 Gehenna hdc: No disk in drive
May 29 10:16:32 Gehenna input: PC Speaker as /class/input/input5
May 29 10:16:32 Gehenna hdc: No disk in drive
May 29 10:16:32 Gehenna pci_hotplug: PCI Hot Plug PCI Core version: 0.5
May 29 10:16:32 Gehenna shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
May 29 10:16:32 Gehenna Linux agpgart interface v0.101 (c) Dave Jones
May 29 10:16:32 Gehenna agpgart: Detected an Intel i815 Chipset.
May 29 10:16:32 Gehenna intel_rng: FWH not detected
May 29 10:16:32 Gehenna agpgart: AGP aperture is 64M @ 0xe8000000
May 29 10:16:32 Gehenna USB Universal Host Controller Interface driver v3.0
May 29 10:16:32 Gehenna ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
May 29 10:16:32 Gehenna PCI: Setting latency timer of device 0000:00:1f.2 to 64
May 29 10:16:32 Gehenna uhci_hcd 0000:00:1f.2: UHCI Host Controller
May 29 10:16:32 Gehenna uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
May 29 10:16:32 Gehenna uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000bce0
May 29 10:16:32 Gehenna usb usb1: configuration #1 chosen from 1 choice
May 29 10:16:32 Gehenna hub 1-0:1.0: USB hub found
May 29 10:16:32 Gehenna hub 1-0:1.0: 2 ports detected
May 29 10:16:32 Gehenna Synaptics Touchpad, model: 1, fw: 5.7, id: 0x8146b1, caps: 0x804793/0x0
May 29 10:16:32 Gehenna serio: Synaptics pass-through port at isa0060/serio1/input0
May 29 10:16:32 Gehenna input: SynPS/2 Synaptics TouchPad as /class/input/input6
May 29 10:16:32 Gehenna usb 1-2: new low speed USB device using uhci_hcd and address 2
May 29 10:16:32 Gehenna PPP generic driver version 2.4.2
May 29 10:16:32 Gehenna usb 1-2: configuration #1 chosen from 1 choice
May 29 10:16:32 Gehenna parport: PnPBIOS parport detected.
May 29 10:16:32 Gehenna parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
May 29 10:16:32 Gehenna lp0: using parport0 (interrupt-driven).
May 29 10:16:32 Gehenna ppdev: user-space parallel port driver
May 29 10:16:32 Gehenna NET: Registered protocol family 23
May 29 10:16:32 Gehenna found SMC SuperIO Chip (devid=0x0e rev=01 base=0x002e): LPC47N252
May 29 10:16:32 Gehenna smsc_ircc_present: can't get sir_base of 0x3e8
May 29 10:16:32 Gehenna ieee1394: Initialized config rom entry `ip1394'
May 29 10:16:32 Gehenna ACPI: PCI Interrupt 0000:02:0f.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
May 29 10:16:32 Gehenna ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[f6ffd800-f6ffdfff] Max Packet=[2048] IR/IT contexts=[4/4]
May 29 10:16:32 Gehenna IBM TrackPoint firmware: 0x0b, buttons: 2/3
May 29 10:16:32 Gehenna Yenta: CardBus bridge found at 0000:02:0f.0 [1028:00a4]
May 29 10:16:32 Gehenna Yenta: Using CSCINT to route CSC interrupts to PCI
May 29 10:16:32 Gehenna Yenta: Routing CardBus interrupts to PCI
May 29 10:16:32 Gehenna Yenta TI: socket 0000:02:0f.0, mfunc 0x05033002, devctl 0x64
May 29 10:16:32 Gehenna Yenta: ISA IRQ mask 0x0438, PCI irq 11
May 29 10:16:32 Gehenna Socket status: 30000006
May 29 10:16:32 Gehenna pcmcia: parent PCI bridge I/O window: 0xd000 - 0xffff
May 29 10:16:32 Gehenna cs: IO port probe 0xd000-0xffff: clean.
May 29 10:16:32 Gehenna pcmcia: parent PCI bridge Memory window: 0xf2000000 - 0xfbffffff
May 29 10:16:32 Gehenna pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff
May 29 10:16:32 Gehenna Yenta: CardBus bridge found at 0000:02:0f.1 [1028:00a4]
May 29 10:16:32 Gehenna Yenta: Using CSCINT to route CSC interrupts to PCI
May 29 10:16:32 Gehenna Yenta: Routing CardBus interrupts to PCI
May 29 10:16:32 Gehenna Yenta TI: socket 0000:02:0f.1, mfunc 0x05033002, devctl 0x64
May 29 10:16:32 Gehenna input: TPPS/2 IBM TrackPoint as /class/input/input7
May 29 10:16:32 Gehenna ieee1394: Host added: ID:BUS[0-00:1023] GUID[4a4fc0002755dc01]
May 29 10:16:32 Gehenna Yenta: ISA IRQ mask 0x0438, PCI irq 11
May 29 10:16:32 Gehenna Socket status: 30000010
May 29 10:16:32 Gehenna pcmcia: parent PCI bridge I/O window: 0xd000 - 0xffff
May 29 10:16:32 Gehenna cs: IO port probe 0xd000-0xffff: clean.
May 29 10:16:32 Gehenna pcmcia: parent PCI bridge Memory window: 0xf2000000 - 0xfbffffff
May 29 10:16:32 Gehenna pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff
May 29 10:16:32 Gehenna pccard: PCMCIA card inserted into slot 1
May 29 10:16:32 Gehenna cs: memory probe 0xf2000000-0xfbffffff: excluding 0xf2000000-0xf27fffff 0xf6800000-0xf6ffffff 0xf8000000-0xf9ffffff
May 29 10:16:32 Gehenna pcmcia: registering new device pcmcia1.0
May 29 10:16:32 Gehenna cs: IO port probe 0x100-0x3af: excluding 0x290-0x297
May 29 10:16:32 Gehenna cs: IO port probe 0x3e0-0x4ff: clean.
May 29 10:16:32 Gehenna cs: IO port probe 0x820-0x8ff: clean.
May 29 10:16:32 Gehenna cs: IO port probe 0xc00-0xcf7: clean.
May 29 10:16:32 Gehenna cs: IO port probe 0xa00-0xaff: clean.
May 29 10:16:32 Gehenna eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
May 29 10:16:32 Gehenna cs: IO port probe 0x100-0x3af: excluding 0x290-0x297
May 29 10:16:32 Gehenna cs: IO port probe 0x3e0-0x4ff: clean.
May 29 10:16:32 Gehenna cs: IO port probe 0x820-0x8ff: clean.
May 29 10:16:32 Gehenna cs: IO port probe 0xc00-0xcf7: clean.
May 29 10:16:32 Gehenna cs: IO port probe 0xa00-0xaff: clean.
May 29 10:16:32 Gehenna 1.0: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
May 29 10:16:32 Gehenna usbcore: registered new interface driver hiddev
May 29 10:16:32 Gehenna input: Logitech USB Mouse as /class/input/input8
May 29 10:16:32 Gehenna input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1f.2-2
May 29 10:16:32 Gehenna usbcore: registered new interface driver usbhid
May 29 10:16:32 Gehenna drivers/usb/input/hid-core.c: v2.6:USB HID core driver
May 29 10:16:32 Gehenna ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
May 29 10:16:32 Gehenna PCI: setting IRQ 5 as level-triggered
May 29 10:16:32 Gehenna ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
May 29 10:16:32 Gehenna EXT3 FS on hda3, internal journal
May 29 10:16:32 Gehenna Adding 262576k swap on /dev/hda2. Priority:-1 extents:1 across:262576k
May 29 10:16:33 Gehenna ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
May 29 10:16:33 Gehenna pcmcia: Detected deprecated PCMCIA ioctl usage from process: lshwd.
May 29 10:16:33 Gehenna pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
May 29 10:16:33 Gehenna pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
May 29 10:19:24 Gehenna NET: Registered protocol family 10
May 29 10:19:24 Gehenna lo: Disabled Privacy Extensions
May 29 10:19:24 Gehenna Mobile IPv6
May 29 10:19:35 Gehenna eth0: no IPv6 routers present
Gehenna ~ ]# ls /proc/acpi/battery
BAT0 BAT1
Gehenna ~ ]# ls /proc/acpi/battery/BAT0
alarm info state
Gehenna ~ ]# ls /proc/acpi/battery/BAT1
alarm info state
I have only one battery in the laptop.
Gehenna ~ ]# dmesg | grep battery
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: Battery Slot [BAT1] (battery present)
Gehenna ~ ]# dmesg | grep acpi
Time: acpi_pm clocksource has been installed.
If you need more info - just email me and ask.
--Theoden
What: /proc/acpi/button
When: August 2007
Why: /proc/acpi/button has been replaced by events to the input layer
since 2.6.20.
http://www.archlinux.org/~tpowa/rc-kernel/