The problem is here:
ACPI: PCI interrupt for device 0000:02:03.0 disabled
Maestro3: probe of 0000:02:03.0 failed with error -2

From dmesg:
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report

Try adding that to your kernel boot line, it could fix the problem. It's a bug in the kernel, not in alsa this time.

But up to yesterday it works widtout problems ....
it must be an bug ...
Im an absoplute beginner , and i have no idea to fix this ...

That's because up to yesterday you had older kernel version.
Append pci=routeirq to the end of kernel line in /boot/grub/menu.lst and reboot
Report back if this has solved your issue.

Same shit , is not run ...
You need an complete dump ?

# lsmod
Module Size Used by
nvidia 4705332 22
i2c_core 17664 1 nvidia
ipv6 252992 10
ext2 56840 1
ppdev 7428 0
eth1394 16644 0
lp 9220 0
snd_seq_oss 29056 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 46800 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
snd_pcm_oss 38816 0
snd_mixer_oss 14336 1 snd_pcm_oss
joydev 8384 0
rtc_sysfs 3840 0
rtc_proc 3844 0
rtc_dev 6792 0
psmouse 35080 0
serio_raw 5636 0
ohci1394 31664 0
parport_pc 35940 1
parport 31176 3 ppdev,lp,parport_pc
snd_maestro3 18340 0
snd_ac97_codec 95396 1 snd_maestro3
ac97_bus 2432 1 snd_ac97_codec
snd_pcm 68484 3 snd_pcm_oss,snd_maestro3,snd_ac97_codec
snd_timer 19076 2 snd_seq,snd_pcm
snd_page_alloc 7816 1 snd_pcm
snd 44388 9 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_maestro3,snd_ac97_codec,snd_pcm,snd_timer
soundcore 6496 1 snd
rtc_cmos 7188 0
ieee1394 84184 2 eth1394,ohci1394
yenta_socket 23180 4
rsrc_nonstatic 11136 1 yenta_socket
rtc_core 7684 4 rtc_sysfs,rtc_proc,rtc_dev,rtc_cmos
rtc_lib 3456 2 rtc_sysfs,rtc_core
ppp_generic 23572 0
slhc 6272 1 ppp_generic
pcspkr 2944 0
sg 26780 0
shpchp 29332 0
pci_hotplug 27720 1 shpchp
intel_agp 21404 1
agpgart 27608 2 nvidia,intel_agp
tsdev 6464 0
thermal 11656 0
evdev 8192 4
processor 24788 1 thermal
fan 3972 0
button 6288 0
battery 8580 0
ac 4100 0
floppy 53284 0
atmel_cs 6144 1
pcmcia 31404 1 atmel_cs
pcmcia_core 32920 4 yenta_socket,rsrc_nonstatic,atmel_cs,pcmcia
atmel 33668 1 atmel_cs
3c59x 39592 0
mii 4992 1 3c59x
ext3 118536 2
jbd 54952 1 ext3
mbcache 6916 2 ext2,ext3
usbhid 36128 0
hid 24448 1 usbhid
ff_memless 5256 1 usbhid
sr_mod 14372 0
cdrom 34080 1 sr_mod
sd_mod 16640 5
uhci_hcd 22032 0
usbcore 111752 3 usbhid,uhci_hcd
ata_piix 11780 4
ata_generic 5636 0
libata 102036 2 ata_piix,ata_generic

# lspci
00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04)
00:01.0 PCI bridge: Intel Corporation 82815 815 Chipset AGP Bridge (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801BAM ISA Bridge (LPC) (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801BAM IDE U100 (rev 03)
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 Go] (rev b2)
02:03.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator (rev 10)
02:06.0 Ethernet controller: 3Com Corporation 3c556 Hurricane CardBus [Cyclone] (rev 10)
02:06.1 Communication controller: 3Com Corporation Mini PCI 56k Winmodem (rev 10)
02:0f.0 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller
02:0f.1 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller
02:0f.2 FireWire (IEEE 1394): Texas Instruments PCI4451 IEEE-1394 Controller

# dmesg
Linux version 2.6.21-ARCH (root@Wohnung) (gcc version 4.1.2 20070423 (prerelease)) #1 SMP PREEMPT Sat May 5 15:01:53 CEST 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000001feea800 end: 000000001ffea800 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000001ffea800 size: 0000000000015800 end: 0000000020000000 type: 2
copy_e820_map() start: 00000000feea0000 size: 0000000000060000 end: 00000000fef00000 type: 2
copy_e820_map() start: 00000000ffb80000 size: 0000000000480000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffea800 (usable)
BIOS-e820: 000000001ffea800 - 0000000020000000 (reserved)
BIOS-e820: 00000000feea0000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
Entering add_active_range(0, 0, 131050) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 131050
HighMem 131050 -> 131050
early_node_map[1] active PFN ranges
0: 0 -> 131050
On node 0 totalpages: 131050
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 991 pages used for memmap
Normal zone: 125963 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000FDE50, 0014 (r0 DELL )
ACPI: RSDT 000FDE64, 0028 (r1 DELL CPi R 27D30303 ASL 61)
ACPI: FACP 000FDE90, 0074 (r1 DELL CPi R 27D30303 ASL 61)
ACPI: DSDT FFFE4000, 2C78 (r1 INT430 SYSFexxx 1001 MSFT 100000E)
ACPI: FACS 1FFFF800, 0040
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 30000000 (gap: 20000000:deea0000)
Built 1 zonelists. Total pages: 130027
Kernel command line: root=/dev/sda3 ro
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0140b000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 996.708 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 513832k/524200k available (2314k kernel code, 9804k reserved, 758k data, 268k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff83000 - 0xfffff000 ( 496 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdffea000 ( 511 MB)
.init : 0xc0407000 - 0xc044a000 ( 268 kB)
.data : 0xc03429b1 - 0xc04002ac ( 758 kB)
.text : 0xc0100000 - 0xc03429b1 (2314 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1994.94 BogoMIPS (lpj=3989894)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ACPI: setting ELCR to 0200 (from 0c20)
CPU0: Intel(R) Pentium(R) III Mobile CPU 1000MHz stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc06e, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0880-08bf claimed by ICH4 GPIO
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: Power Resource [PADA] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved
pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:02: ioport range 0x800-0x805 has been reserved
pnp: 00:02: ioport range 0x808-0x80f has been reserved
pnp: 00:03: ioport range 0x806-0x807 has been reserved
pnp: 00:03: ioport range 0x810-0x85f has been reserved
pnp: 00:03: ioport range 0x860-0x87f has been reserved
pnp: 00:03: ioport range 0x880-0x8bf has been reserved
pnp: 00:03: ioport range 0x8c0-0x8ff has been reserved
pnp: 00:03: ioport range 0x600-0x67f has been reserved
pnp: 00:03: ioport range 0x680-0x6ff has been reserved
pnp: 00:04: ioport range 0xf000-0xf0fe has been reserved
pnp: 00:04: ioport range 0xf100-0xf1fe has been reserved
pnp: 00:04: ioport range 0xf200-0xf2fe has been reserved
pnp: 00:04: ioport range 0xf400-0xf4fe has been reserved
pnp: 00:04: ioport range 0xf500-0xf5fe has been reserved
pnp: 00:04: ioport range 0xf600-0xf6fe has been reserved
pnp: 00:04: ioport range 0xf800-0xf8fe has been reserved
pnp: 00:04: ioport range 0xf900-0xf9fe has been reserved
pnp: 00:04: iomem range 0xfa000000-0xfbffffff has been reserved
pnp: 00:09: ioport range 0x900-0x91f has been reserved
pnp: 00:09: ioport range 0x3f0-0x3f1 has been reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: c000-cfff
MEM window: fc000000-fdffffff
PREFETCH window: e0000000-e7ffffff
PCI: Bus 3, cardbus bridge: 0000:02:0f.0
IO window: 0000e000-0000e0ff
IO window: 0000fc00-0000fcff
PREFETCH window: 30000000-33ffffff
MEM window: f4000000-f7ffffff
PCI: Bus 7, cardbus bridge: 0000:02:0f.1
IO window: 00001000-000010ff
IO window: 00001400-000014ff
PREFETCH window: 34000000-37ffffff
MEM window: 3c000000-3fffffff
PCI: Bridge: 0000:00:1e.0
IO window: e000-ffff
MEM window: f4000000-fbffffff
PREFETCH window: 30000000-39ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:02:0f.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:02:0f.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
PCI: Enabling device 0000:02:0f.1 (0000 -> 0003)
ACPI: PCI Interrupt 0000:02:0f.1[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1586k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 268k freed
libata version 2.20 loaded.
ata_piix 0000:00:1f.1: version 2.10ac1
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
scsi0 : ata_piix
ata1.00: ATA-5: HITACHI_DK23CA-30, 00H0A0A3, max UDMA/100
ata1.00: 58605120 sectors, multi 8: LBA
ata1.01: ATAPI, max UDMA/33, CDB intr
ata1.01: device is on DMA blacklist, disabling DMA
ata1.00: configured for UDMA/100
ata1.01: configured for PIO4
scsi1 : ata_piix
scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23CA-3 00H0 PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM SAMSUNG CD-ROM SN-124 N001 PQ: 0 ANSI: 5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: irq 10, io base 0x0000dce0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
usb 1-1: new low speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1f.2-1
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:06.0: 3Com PCI 3c556 Laptop Tornado at e0822c00.
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: Battery Slot [BAT1] (battery present)
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PBTN]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SBTN]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THM] (72 C)
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel i815 Chipset.
agpgart: AGP aperture is 64M @ 0xe8000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_rng: FWH not detected
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 0:0:1:0: Attached scsi generic sg1 type 5
input: PC Speaker as /class/input/input6
PPP generic driver version 2.4.2
Yenta: CardBus bridge found at 0000:02:0f.0 [1028:00e6]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:0f.0, mfunc 0x05033002, devctl 0x64
Yenta: ISA IRQ mask 0x08b8, PCI irq 10
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
cs: IO port probe 0xe000-0xffff: clean.
pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x39ffffff
Yenta: CardBus bridge found at 0000:02:0f.1 [1028:00e6]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:0f.1, mfunc 0x05033002, devctl 0x64
ieee1394: Initialized config rom entry `ip1394'
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day
Yenta: ISA IRQ mask 0x08b8, PCI irq 10
Socket status: 30000010
pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
cs: IO port probe 0xe000-0xffff: clean.
pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x39ffffff
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
pccard: PCMCIA card inserted into slot 1
cs: memory probe 0xf4000000-0xfbffffff: excluding 0xf4000000-0xf8ffffff 0xfa000000-0xfbffffff
pcmcia: registering new device pcmcia1.0
Synaptics Touchpad, model: 1, fw: 5.7, id: 0x8146b1, caps: 0x804793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input7
eth1: Atmel at76c50x. Version 0.98. MAC 00:08:a1:42:d9:54
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ACPI: PCI interrupt for device 0000:02:03.0 disabled
Maestro3: probe of 0000:02:03.0 failed with error -2
ACPI: PCI Interrupt 0000:02:0f.2[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[f8ffc800-f8ffcfff] Max Packet=[2048] IR/IT contexts=[4/4]
lp0: using parport0 (interrupt-driven).
ieee1394: Host added: ID:BUS[0-00:1023] GUID[384fc000131f2810]
eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ppdev: user-space parallel port driver
Time: acpi_pm clocksource has been installed.
EXT3 FS on sda3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 265064k swap on /dev/sda2. Priority:-1 extents:1 across:265064k
IBM TrackPoint firmware: 0x0b, buttons: 2/3
input: TPPS/2 IBM TrackPoint as /class/input/input8
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
eth1: no IPv6 routers present

rc.conf
...
# -----------------------------------------------------------------------
# DAEMONS
# -----------------------------------------------------------------------
#
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
#
DAEMONS=(syslog-ng dbus hal network crond)

and menu.lst
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /vmlinuz26 root=/dev/sda3 ro pci=routeirq
initrd /kernel26-fallback.img

thats all ...

first qeustion, how did you configure your soundcard?
did you run alsaconf, if yes clean up you modprobe.conf.

i never touch my modprobe.conf ...
#
# /etc/modprobe.conf (for v2.6 kernels)
#


you see its clean

http://www.drcrazy.de/output.jpg
Thats the Massage under KDE ...
my User is in the group Sound ...

could you try running alsaconf and look what entries are done to modprobe.conf?

okai , alsaconf find my soundcard is sad yes put it into my conf
after he do it it says :

Loading driver...
:: Saving ALSA Levels [BUSY] /usr/sbin/alsactl: save_state:1253: No soundcards found...
[FAIL]
:: Restoring ALSA Levels [BUSY] /usr/sbin/alsactl: load_state:1326: No soundcards found...
[FAIL]
Setting default volumes...
amixer: Mixer attach default error: No such device















===============================================================================

Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.

Have a lot of fun!


[root@schleppie drcrazy]# /etc/rc.d/alsa start
:: Restoring ALSA Levels [BUSY] /usr/sbin/alsactl: load_state:1326: No soundcards found...
[FAIL]
[root@schleppie drcrazy]#

it puts that into my conf :
#
# /etc/modprobe.conf (for v2.6 kernels)
#
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.14rc2 ---
alias snd-card-0 snd-maestro3
alias sound-slot-0 snd-maestro3
# --- END: Generated by ALSACONF, do not edit. ---

in the moment i try to restart to show the effects...

okai , under kde i get no error massages more ... but it dont play sounds ... on my kmix it is an X and i cant get sound

what you needd now ?

i try to patch alsa again in kernel just wait a little bit.

k, then i get the update from the original server ?

[current]
# North America
Server = ftp://ftp.archlinux.org/current/os/i686

?

http://www.archlinux.org/~tpowa/kernel26-2.6.21.1-8.pkg.tar.gz
please try this one

Hey Tobias ... IT WORKS !
I clean the modprobe.conf ...
and then i Update that width pacman -U kernel26-2.6.21.1-8.pkg.tar.gz
After i restart IT WORKS Perfectly

But one question i have ... when i madew an pacman -Syu .... then i go back to the bad sdstem ?
Or you fix the kernel to the normally update servers ?

By the way Very thank for you work...

yes its already on the way to the servers.
phew an other .21 bug squashed.
greetings
tpowa