Arch Linux

Upgraded my IBM Thinkpad 600E using repos core, community, extra. Fully. Clean.

Linux 3.14.0-4-ARCH was installed. Rebooted. LXDE / X is not started properly. All I can see is a black screen with some pink lines at the top.


/var/log/Xorg.0.log


[ 99.125]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 99.125] X Protocol Version 11, Revision 0
[ 99.126] Build Operating System: Linux 3.12.5-1-ARCH i686
[ 99.126] Current Operating System: Linux wishthinkpad.loc 3.14.0-4-ARCH #1 SMP PREEMPT Wed Apr 9 20:53:45 CEST 2014 i686
[ 99.126] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e2c326a9-b6c3-4360-9700-b9f991dcfda3 rw pci=noacpi lapic apic acpi=noirq apm=on pci=use_crs quiet
[ 99.130] Build Date: 09 January 2014 09:32:33AM
[ 99.130]
[ 99.130] Current version of pixman: 0.32.4
[ 99.130] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 99.130] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 99.132] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 10 01:36:59 2014
[ 99.132] (==) Using config file: "/etc/X11/xorg.conf"
[ 99.132] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 99.138] (==) ServerLayout "layout1"
[ 99.138] (**) |-->Screen "screen1" (0)
[ 99.138] (**) | |-->Monitor "monitor1"
[ 99.139] (==) No device specified for screen "screen1".
Using the first device section listed.
[ 99.139] (**) | |-->Device "Card0"
[ 99.139] (**) Option "DontZap" "False"
[ 99.143] (**) Option "AllowMouseOpenFail"
[ 99.143] (==) Automatically adding devices
[ 99.143] (==) Automatically enabling devices
[ 99.144] (==) Automatically adding GPU devices
[ 99.144] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 99.144] Entry deleted from font path.
[ 99.144] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 99.144] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 99.144] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 99.144] (II) Loader magic: 0x8265660
[ 99.144] (II) Module ABI versions:
[ 99.145] X.Org ANSI C Emulation: 0.4
[ 99.145] X.Org Video Driver: 15.0
[ 99.145] X.Org XInput driver : 20.0
[ 99.145] X.Org Server Extension : 8.0
[ 99.154] (--) PCI:*(0:1:0:0) 10c8:0005:1014:00dd rev 18, Mem @ 0xe0000000/16777216, 0x70000000/4194304, 0x70400000/1048576
[ 99.155] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 99.155] Initializing built-in extension Generic Event Extension
[ 99.155] Initializing built-in extension SHAPE
[ 99.156] Initializing built-in extension MIT-SHM
[ 99.156] Initializing built-in extension XInputExtension
[ 99.156] Initializing built-in extension XTEST
[ 99.156] Initializing built-in extension BIG-REQUESTS
[ 99.156] Initializing built-in extension SYNC
[ 99.156] Initializing built-in extension XKEYBOARD
[ 99.156] Initializing built-in extension XC-MISC
[ 99.156] Initializing built-in extension SECURITY
[ 99.157] Initializing built-in extension XINERAMA
[ 99.157] Initializing built-in extension XFIXES
[ 99.157] Initializing built-in extension RENDER
[ 99.157] Initializing built-in extension RANDR
[ 99.157] Initializing built-in extension COMPOSITE
[ 99.157] Initializing built-in extension DAMAGE
[ 99.157] Initializing built-in extension MIT-SCREEN-SAVER
[ 99.157] Initializing built-in extension DOUBLE-BUFFER
[ 99.157] Initializing built-in extension RECORD
[ 99.158] Initializing built-in extension DPMS
[ 99.158] Initializing built-in extension Present
[ 99.158] Initializing built-in extension DRI3
[ 99.158] Initializing built-in extension X-Resource
[ 99.158] Initializing built-in extension XVideo
[ 99.158] Initializing built-in extension XVideo-MotionCompensation
[ 99.158] Initializing built-in extension XFree86-VidModeExtension
[ 99.159] Initializing built-in extension XFree86-DGA
[ 99.159] Initializing built-in extension XFree86-DRI
[ 99.159] Initializing built-in extension DRI2
[ 99.159] (II) "glx" will be loaded by default.
[ 99.159] (II) LoadModule: "v4l"
[ 99.162] (WW) Warning, couldn't open module v4l
[ 99.162] (II) UnloadModule: "v4l"
[ 99.162] (II) Unloading v4l
[ 99.162] (EE) Failed to load module "v4l" (module does not exist, 0)
[ 99.163] (II) LoadModule: "glx"
[ 99.163] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 99.174] (II) Module glx: vendor="X.Org Foundation"
[ 99.174] compiled for 1.15.0, module version = 1.0.0
[ 99.174] ABI class: X.Org Server Extension, version 8.0
[ 99.174] (==) AIGLX enabled
[ 99.174] Loading extension GLX
[ 99.175] (II) LoadModule: "neomagic"
[ 99.176] (II) Loading /usr/lib/xorg/modules/drivers/neomagic_drv.so
[ 99.177] (II) Module neomagic: vendor="X.Org Foundation"
[ 99.177] compiled for 1.15.0, module version = 1.2.8
[ 99.177] Module class: X.Org Video Driver
[ 99.177] ABI class: X.Org Video Driver, version 15.0
[ 99.177] (II) NEOMAGIC: Driver for Neomagic chipsets: neo2070, neo2090, neo2093,
neo2097, neo2160, neo2200, neo2230, neo2360, neo2380
[ 99.178] (++) using VT number 1

[ 99.179] (WW) Falling back to old probe method for neomagic
[ 99.179] (--) Chipset neo2200 found
[ 99.179] (II) Loading sub module "vgahw"
[ 99.180] (II) LoadModule: "vgahw"
[ 99.181] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 99.182] (II) Module vgahw: vendor="X.Org Foundation"
[ 99.182] compiled for 1.15.0, module version = 0.1.0
[ 99.182] ABI class: X.Org Video Driver, version 15.0
[ 99.183] (II) NEOMAGIC(0): Chipset is a MagicMedia 256AV (NM2200)
[ 99.184] (II) NEOMAGIC(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 99.184] (--) NEOMAGIC(0): Panel is a 1024x768 color TFT display
[ 99.184] (II) Loading sub module "ddc"
[ 99.184] (II) LoadModule: "ddc"
[ 99.184] (II) Module "ddc" already built-in
[ 99.184] (II) Loading sub module "vbe"
[ 99.185] (II) LoadModule: "vbe"
[ 99.186] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 99.187] (II) Module vbe: vendor="X.Org Foundation"
[ 99.187] compiled for 1.15.0, module version = 1.1.0
[ 99.187] ABI class: X.Org Video Driver, version 15.0
[ 99.187] (II) Loading sub module "int10"
[ 99.187] (II) LoadModule: "int10"
[ 99.188] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 99.189] (II) Module int10: vendor="X.Org Foundation"
[ 99.189] compiled for 1.15.0, module version = 1.0.0
[ 99.189] ABI class: X.Org Video Driver, version 15.0
[ 99.190] (II) NEOMAGIC(0): initializing int10
[ 99.193] (II) NEOMAGIC(0): Primary V_BIOS segment is: 0xc000
[ 99.195] (II) NEOMAGIC(0): VESA BIOS detected
[ 99.196] (II) NEOMAGIC(0): VESA VBE Version 2.0
[ 99.196] (II) NEOMAGIC(0): VESA VBE Total Mem: 2496 kB
[ 99.196] (II) NEOMAGIC(0): VESA VBE OEM: MagicGraph 256 AV 48K
[ 99.196] (II) NEOMAGIC(0): VESA VBE OEM Software Rev: 1.15
[ 99.196] (II) NEOMAGIC(0): VESA VBE OEM Vendor: NeoMagic
[ 99.196] (II) NEOMAGIC(0): VESA VBE OEM Product: MagicMedia 256 AV
[ 99.196] (II) NEOMAGIC(0): VESA VBE OEM Product Rev: 01.0
[ 99.279] (II) NEOMAGIC(0): VESA VBE DDC supported
[ 99.279] (II) NEOMAGIC(0): VESA VBE DDC Level 2
[ 99.279] (II) NEOMAGIC(0): VESA VBE DDC transfer in appr. 1 sec.
[ 101.450] (II) NEOMAGIC(0): VESA VBE DDC read successfully
[ 101.450] (II) NEOMAGIC(0): Manufacturer: AOC Model: c780 Serial#: 12944
[ 101.450] (II) NEOMAGIC(0): Year: 2006 Week: 8
[ 101.450] (II) NEOMAGIC(0): EDID Version: 1.3
[ 101.451] (II) NEOMAGIC(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 101.451] (II) NEOMAGIC(0): Sync: Separate
[ 101.451] (II) NEOMAGIC(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 101.451] (II) NEOMAGIC(0): Gamma: 2.20
[ 101.451] (II) NEOMAGIC(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 101.451] (II) NEOMAGIC(0): First detailed timing is preferred mode
[ 101.451] (II) NEOMAGIC(0): redX: 0.644 redY: 0.338 greenX: 0.270 greenY: 0.602
[ 101.452] (II) NEOMAGIC(0): blueX: 0.140 blueY: 0.084 whiteX: 0.313 whiteY: 0.329
[ 101.452] (II) NEOMAGIC(0): Supported established timings:
[ 101.452] (II) NEOMAGIC(0): 720x400@70Hz
[ 101.452] (II) NEOMAGIC(0): 640x480@60Hz
[ 101.452] (II) NEOMAGIC(0): 640x480@67Hz
[ 101.452] (II) NEOMAGIC(0): 640x480@72Hz
[ 101.452] (II) NEOMAGIC(0): 640x480@75Hz
[ 101.452] (II) NEOMAGIC(0): 800x600@56Hz
[ 101.452] (II) NEOMAGIC(0): 800x600@60Hz
[ 101.452] (II) NEOMAGIC(0): 800x600@72Hz
[ 101.453] (II) NEOMAGIC(0): 800x600@75Hz
[ 101.453] (II) NEOMAGIC(0): 832x624@75Hz
[ 101.453] (II) NEOMAGIC(0): 1024x768@60Hz
[ 101.453] (II) NEOMAGIC(0): 1024x768@70Hz
[ 101.453] (II) NEOMAGIC(0): 1024x768@75Hz
[ 101.453] (II) NEOMAGIC(0): 1280x1024@75Hz
[ 101.453] (II) NEOMAGIC(0): 1152x864@75Hz
[ 101.453] (II) NEOMAGIC(0): Manufacturer's mask: 0
[ 101.453] (II) NEOMAGIC(0): Supported standard timings:
[ 101.453] (II) NEOMAGIC(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 101.454] (II) NEOMAGIC(0): Supported detailed timing:
[ 101.454] (II) NEOMAGIC(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 101.454] (II) NEOMAGIC(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 101.454] (II) NEOMAGIC(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 101.454] (II) NEOMAGIC(0): Serial No: T7CJ62AN12944
[ 101.454] (II) NEOMAGIC(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 101.454] (II) NEOMAGIC(0): Monitor name: WJ1780PI
[ 101.454] (II) NEOMAGIC(0): EDID (in hex):
[ 101.454] (II) NEOMAGIC(0): 00ffffffffffff0005e380c790320000
[ 101.455] (II) NEOMAGIC(0): 0810010368221b78eae0e5a456459a23
[ 101.455] (II) NEOMAGIC(0): 155054bfef8081800101010101010101
[ 101.455] (II) NEOMAGIC(0): 010101010101302a009851002a403070
[ 101.455] (II) NEOMAGIC(0): 1300520e1100001e000000ff00543743
[ 101.455] (II) NEOMAGIC(0): 4a3632414e3132393434000000fd0032
[ 101.455] (II) NEOMAGIC(0): 4b1e530e000a202020202020000000fc
[ 101.455] (II) NEOMAGIC(0): 00574a3137383050490a2020202000e7
[ 101.455] (II) NEOMAGIC(0): EDID vendor "AOC", prod id 51072
[ 101.456] (II) NEOMAGIC(0): Using hsync ranges from config file
[ 101.456] (II) NEOMAGIC(0): Using vrefresh ranges from config file
[ 101.456] (II) NEOMAGIC(0): Printing DDC gathered Modelines:
[ 101.456] (II) NEOMAGIC(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 101.456] (II) NEOMAGIC(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 101.456] (II) NEOMAGIC(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 101.457] (II) NEOMAGIC(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 101.457] (II) NEOMAGIC(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 101.457] (II) NEOMAGIC(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 101.457] (II) NEOMAGIC(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 101.457] (II) NEOMAGIC(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 101.457] (II) NEOMAGIC(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 101.457] (II) NEOMAGIC(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 101.457] (II) NEOMAGIC(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 101.458] (II) NEOMAGIC(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 101.458] (II) NEOMAGIC(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 101.458] (II) NEOMAGIC(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 101.458] (II) NEOMAGIC(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 101.458] (II) NEOMAGIC(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 101.459] (**) NEOMAGIC(0): Depth 16, (--) framebuffer bpp 16
[ 101.459] (==) NEOMAGIC(0): RGB weight 565
[ 101.459] (==) NEOMAGIC(0): Default visual is TrueColor
[ 101.459] (==) NEOMAGIC(0): Using gamma correction (1.0, 1.0, 1.0)
[ 101.460] (**) NEOMAGIC(0): Option "OverlayMem" "829440"
[ 101.460] (**) NEOMAGIC(0): reserve 829440 bytes for overlay.
[ 101.460] (--) NEOMAGIC(0): External CRT only display mode
[ 101.460] (**) NEOMAGIC(0): using PCI Burst mode
[ 101.460] (**) NEOMAGIC(0): Option StrangeLockups set: disabling some acceleration
[ 101.460] (II) Loading sub module "xaa"
[ 101.460] (II) LoadModule: "xaa"
[ 101.462] (WW) Warning, couldn't open module xaa
[ 101.462] (II) UnloadModule: "xaa"
[ 101.463] (II) Unloading xaa
[ 101.463] (EE) NEOMAGIC: Failed to load module "xaa" (module does not exist, 0)
[ 101.463] (II) NEOMAGIC(0): Falling back to shadow
[ 101.463] (II) Loading sub module "shadow"
[ 101.463] (II) LoadModule: "shadow"
[ 101.464] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 101.465] (II) Module shadow: vendor="X.Org Foundation"
[ 101.465] compiled for 1.15.0, module version = 1.1.0
[ 101.465] ABI class: X.Org ANSI C Emulation, version 0.4
[ 101.465] (**) NEOMAGIC(0): Using "Shadow Framebuffer" - acceleration disabled
[ 101.465] (--) NEOMAGIC(0): FB base address is set at 0xE0000000.
[ 101.465] (--) NEOMAGIC(0): MMIO base address is set at 0x70000000.
[ 101.465] (--) NEOMAGIC(0): MMIO base address2 is set at 0x70400000.
[ 101.465] (**) NEOMAGIC(0): VideoRAM: 2560 kByte
[ 101.465] (--) NEOMAGIC(0): Max Clock: 110000 kHz
[ 101.465] (II) NEOMAGIC(0): monitor1: Using hsync range of 31.50-48.00 kHz
[ 101.466] (II) NEOMAGIC(0): monitor1: Using vrefresh range of 56.00-65.00 Hz
[ 101.466] (II) NEOMAGIC(0): monitor1: Using maximum pixel clock of 145.00 MHz
[ 101.466] (II) NEOMAGIC(0): Clock range: 11.00 to 110.00 MHz
[ 101.466] (II) NEOMAGIC(0): Not using mode "768x576" (hsync out of range)
[ 101.466] (II) NEOMAGIC(0): Not using mode "768x576" (hsync out of range)
[ 101.466] (II) NEOMAGIC(0): Not using default mode "640x350" (vrefresh out of range)
[ 101.466] (II) NEOMAGIC(0): Not using default mode "320x175" (vrefresh out of range)
[ 101.466] (II) NEOMAGIC(0): Not using default mode "640x400" (vrefresh out of range)
[ 101.467] (II) NEOMAGIC(0): Not using default mode "320x200" (vrefresh out of range)
[ 101.467] (II) NEOMAGIC(0): Not using default mode "720x400" (vrefresh out of range)
[ 101.467] (II) NEOMAGIC(0): Not using default mode "360x200" (vrefresh out of range)
[ 101.467] (II) NEOMAGIC(0): Not using default mode "640x480" (vrefresh out of range)
[ 101.467] (II) NEOMAGIC(0): Not using default mode "320x240" (vrefresh out of range)
[ 101.467] (II) NEOMAGIC(0): Not using default mode "640x480" (vrefresh out of range)
[ 101.467] (II) NEOMAGIC(0): Not using default mode "320x240" (vrefresh out of range)
[ 101.467] (II) NEOMAGIC(0): Not using default mode "640x480" (vrefresh out of range)
[ 101.467] (II) NEOMAGIC(0): Not using default mode "320x240" (vrefresh out of range)
[ 101.467] (II) NEOMAGIC(0): Not using default mode "800x600" (vrefresh out of range)
[ 101.468] (II) NEOMAGIC(0): Not using default mode "400x300" (vrefresh out of range)
[ 101.468] (II) NEOMAGIC(0): Not using default mode "800x600" (vrefresh out of range)
[ 101.468] (II) NEOMAGIC(0): Not using default mode "400x300" (vrefresh out of range)
[ 101.468] (II) NEOMAGIC(0): Not using default mode "800x600" (hsync out of range)
[ 101.468] (II) NEOMAGIC(0): Not using default mode "400x300" (hsync out of range)
[ 101.468] (II) NEOMAGIC(0): Not using default mode "1024x768i" (bad mode clock/interlace/doublescan)
[ 101.468] (II) NEOMAGIC(0): Not using default mode "512x384i" (bad mode clock/interlace/doublescan)
[ 101.468] (II) NEOMAGIC(0): Not using default mode "1024x768" (hsync out of range)
[ 101.468] (II) NEOMAGIC(0): Not using default mode "512x384" (hsync out of range)
[ 101.469] (II) NEOMAGIC(0): Not using default mode "1024x768" (hsync out of range)
[ 101.469] (II) NEOMAGIC(0): Not using default mode "512x384" (hsync out of range)
[ 101.469] (II) NEOMAGIC(0): Not using default mode "1024x768" (hsync out of range)
[ 101.469] (II) NEOMAGIC(0): Not using default mode "512x384" (hsync out of range)
[ 101.469] (II) NEOMAGIC(0): Not using default mode "1152x864" (hsync out of range)
[ 101.469] (II) NEOMAGIC(0): Not using default mode "576x432" (hsync out of range)
[ 101.469] (II) NEOMAGIC(0): Not using default mode "1280x960" (hsync out of range)
[ 101.469] (II) NEOMAGIC(0): Not using default mode "640x480" (hsync out of range)
[ 101.469] (II) NEOMAGIC(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
[ 101.469] (II) NEOMAGIC(0): Not using default mode "640x480" (hsync out of range)
[ 101.470] (II) NEOMAGIC(0): Not using default mode "1280x1024" (hsync out of range)
[ 101.470] (II) NEOMAGIC(0): Not using default mode "640x512" (hsync out of range)
[ 101.470] (II) NEOMAGIC(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
[ 101.470] (II) NEOMAGIC(0): Not using default mode "640x512" (hsync out of range)
[ 101.470] (II) NEOMAGIC(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
[ 101.470] (II) NEOMAGIC(0): Not using default mode "640x512" (hsync out of range)
[ 101.470] (II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for mode)
[ 101.470] (II) NEOMAGIC(0): Not using default mode "800x600" (unknown reason)
[ 101.470] (II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for mode)
[ 101.471] (II) NEOMAGIC(0): Not using default mode "800x600" (unknown reason)
[ 101.471] (II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for mode)
[ 101.471] (II) NEOMAGIC(0): Not using default mode "800x600" (unknown reason)
[ 101.471] (II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for mode)
[ 101.471] (II) NEOMAGIC(0): Not using default mode "800x600" (unknown reason)
[ 101.471] (II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for mode)
[ 101.471] (II) NEOMAGIC(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
[ 101.471] (II) NEOMAGIC(0): Not using default mode "1792x1344" (insufficient memory for mode)
[ 101.471] (II) NEOMAGIC(0): Not using default mode "896x672" (unknown reason)
[ 101.471] (II) NEOMAGIC(0): Not using default mode "1792x1344" (insufficient memory for mode)
[ 101.471] (II) NEOMAGIC(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
[ 101.472] (II) NEOMAGIC(0): Not using default mode "1856x1392" (insufficient memory for mode)
[ 101.472] (II) NEOMAGIC(0): Not using default mode "928x696" (unknown reason)
[ 101.472] (II) NEOMAGIC(0): Not using default mode "1856x1392" (insufficient memory for mode)
[ 101.472] (II) NEOMAGIC(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
[ 101.472] (II) NEOMAGIC(0): Not using default mode "1920x1440" (insufficient memory for mode)
[ 101.472] (II) NEOMAGIC(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[ 101.472] (II) NEOMAGIC(0): Not using default mode "1920x1440" (insufficient memory for mode)
[ 101.472] (II) NEOMAGIC(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[ 101.472] (II) NEOMAGIC(0): Not using default mode "832x624" (hsync out of range)
[ 101.472] (II) NEOMAGIC(0): Not using default mode "416x312" (hsync out of range)
[ 101.472] (II) NEOMAGIC(0): Not using default mode "1400x1050" (insufficient memory for mode)
[ 101.473] (II) NEOMAGIC(0): Not using default mode "700x525" (unknown reason)
[ 101.473] (II) NEOMAGIC(0): Not using default mode "1400x1050" (insufficient memory for mode)
[ 101.473] (II) NEOMAGIC(0): Not using default mode "700x525" (unknown reason)
[ 101.473] (II) NEOMAGIC(0): Not using default mode "1920x1440" (insufficient memory for mode)
[ 101.473] (II) NEOMAGIC(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[ 101.473] (II) NEOMAGIC(0): Not using default mode "2048x1536" (insufficient memory for mode)
[ 101.473] (II) NEOMAGIC(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[ 101.473] (II) NEOMAGIC(0): Not using default mode "2048x1536" (insufficient memory for mode)
[ 101.473] (II) NEOMAGIC(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[ 101.474] (II) NEOMAGIC(0): Not using default mode "2048x1536" (insufficient memory for mode)
[ 101.474] (II) NEOMAGIC(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[ 101.474] (II) NEOMAGIC(0): Not using driver mode "1280x1024" (hsync out of range)
[ 101.474] (II) NEOMAGIC(0): Not using driver mode "640x480" (vrefresh out of range)
[ 101.474] (II) NEOMAGIC(0): Not using driver mode "640x480" (vrefresh out of range)
[ 101.474] (II) NEOMAGIC(0): Not using driver mode "640x480" (vrefresh out of range)
[ 101.474] (II) NEOMAGIC(0): Not using driver mode "720x400" (vrefresh out of range)
[ 101.474] (II) NEOMAGIC(0): Not using driver mode "1280x1024" (bad mode clock/interlace/doublescan)
[ 101.474] (II) NEOMAGIC(0): Not using driver mode "1024x768" (hsync out of range)
[ 101.474] (II) NEOMAGIC(0): Not using driver mode "1024x768" (hsync out of range)
[ 101.475] (II) NEOMAGIC(0): Not using driver mode "832x624" (hsync out of range)
[ 101.475] (II) NEOMAGIC(0): Not using driver mode "800x600" (vrefresh out of range)
[ 101.475] (II) NEOMAGIC(0): Not using driver mode "800x600" (vrefresh out of range)
[ 101.475] (II) NEOMAGIC(0): Not using driver mode "1152x864" (hsync out of range)
[ 101.475] (II) NEOMAGIC(0): Not using mode "832x624" (no mode of this name)
[ 101.475] (II) NEOMAGIC(0): Not using mode "480x360" (no mode of this name)
[ 101.475] (--) NEOMAGIC(0): Virtual size is 1024x768 (pitch 1024)
[ 101.475] (**) NEOMAGIC(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[ 101.476] (II) NEOMAGIC(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz ez)
[ 101.476] (**) NEOMAGIC(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 101.476] (II) NEOMAGIC(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz ez)
[ 101.476] (**) NEOMAGIC(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[ 101.476] (II) NEOMAGIC(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz ez)
[ 101.476] (**) NEOMAGIC(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
[ 101.476] (II) NEOMAGIC(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz zd)
[ 101.476] (**) NEOMAGIC(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[ 101.477] (II) NEOMAGIC(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 101.477] (**) NEOMAGIC(0): Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[ 101.477] (II) NEOMAGIC(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 101.477] (**) NEOMAGIC(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 101.477] (II) NEOMAGIC(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 101.477] (**) NEOMAGIC(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[ 101.477] (II) NEOMAGIC(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 101.477] (**) NEOMAGIC(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[ 101.477] (II) NEOMAGIC(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 101.478] (**) NEOMAGIC(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
[ 101.478] (II) NEOMAGIC(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 101.478] (**) NEOMAGIC(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
[ 101.478] (II) NEOMAGIC(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 101.478] (**) NEOMAGIC(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
[ 101.478] (II) NEOMAGIC(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 101.478] (**) NEOMAGIC(0): Display dimensions: (340, 270) mm
[ 101.478] (**) NEOMAGIC(0): DPI set to (76, 72)
[ 101.479] (II) Loading sub module "fb"
[ 101.479] (II) LoadModule: "fb"
[ 101.480] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 101.482] (II) Module fb: vendor="X.Org Foundation"
[ 101.482] compiled for 1.15.0, module version = 1.0.0
[ 101.482] ABI class: X.Org ANSI C Emulation, version 0.4
[ 101.483] (II) Loading sub module "ramdac"
[ 101.483] (II) LoadModule: "ramdac"
[ 101.483] (II) Module "ramdac" already built-in
[ 101.890] (II) NEOMAGIC(0): Using linear framebuffer at: 0xE0000000
[ 101.891] (--) NEOMAGIC(0): 1048576 bytes off-screen memory available
[ 101.891] (II) NEOMAGIC(0): Using H/W Cursor.
[ 101.891] (II) NEOMAGIC(0): Overlay at 0x1b5400
[ 101.891] (II) NEOMAGIC(0): Using 106 scanlines of offscreen memory
[ 101.891] (==) NEOMAGIC(0): Backing store enabled
[ 101.891] (==) NEOMAGIC(0): Silken mouse enabled
[ 101.893] (==) NEOMAGIC(0): DPMS enabled
[ 101.893] (==) RandR enabled
[ 101.979] (II) AIGLX: Screen 0 is not DRI2 capable
[ 101.979] (EE) AIGLX: reverting to software rendering
[ 102.136] (II) AIGLX: Loaded and initialized swrast
[ 102.136] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 102.491] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 102.491] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 102.492] (II) LoadModule: "evdev"
[ 102.493] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 102.495] (II) Module evdev: vendor="X.Org Foundation"
[ 102.495] compiled for 1.15.0, module version = 2.8.2
[ 102.495] Module class: X.Org XInput Driver
[ 102.495] ABI class: X.Org XInput driver, version 20.0
[ 102.495] (II) Using input driver 'evdev' for 'Power Button'
[ 102.495] (**) Power Button: always reports core events
[ 102.496] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 102.496] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 102.496] (--) evdev: Power Button: Found keys
[ 102.496] (II) evdev: Power Button: Configuring as keyboard
[ 102.496] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[ 102.497] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 102.497] (**) Option "xkb_rules" "evdev"
[ 102.497] (**) Option "xkb_model" "pc104"
[ 102.497] (**) Option "xkb_layout" "us"
[ 102.704] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 102.705] (II) No input driver specified, ignoring this device.
[ 102.705] (II) This device may have been added with another device file.
[ 102.707] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 102.707] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 102.707] (II) Using input driver 'evdev' for 'Sleep Button'
[ 102.708] (**) Sleep Button: always reports core events
[ 102.708] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[ 102.708] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 102.708] (--) evdev: Sleep Button: Found keys
[ 102.708] (II) evdev: Sleep Button: Configuring as keyboard
[ 102.708] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event5"
[ 102.708] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[ 102.709] (**) Option "xkb_rules" "evdev"
[ 102.709] (**) Option "xkb_model" "pc104"
[ 102.709] (**) Option "xkb_layout" "us"
[ 102.715] (II) config/udev: Adding input device HID 4752:4965 (/dev/input/event1)
[ 102.715] (**) HID 4752:4965: Applying InputClass "evdev keyboard catchall"
[ 102.715] (II) Using input driver 'evdev' for 'HID 4752:4965'
[ 102.715] (**) HID 4752:4965: always reports core events
[ 102.715] (**) evdev: HID 4752:4965: Device: "/dev/input/event1"
[ 102.715] (--) evdev: HID 4752:4965: Vendor 0x4752 Product 0x4965
[ 102.716] (--) evdev: HID 4752:4965: Found 1 mouse buttons
[ 102.716] (--) evdev: HID 4752:4965: Found scroll wheel(s)
[ 102.716] (--) evdev: HID 4752:4965: Found relative axes
[ 102.716] (II) evdev: HID 4752:4965: Forcing relative x/y axes to exist.
[ 102.716] (--) evdev: HID 4752:4965: Found absolute axes
[ 102.716] (II) evdev: HID 4752:4965: Forcing absolute x/y axes to exist.
[ 102.716] (--) evdev: HID 4752:4965: Found keys
[ 102.716] (II) evdev: HID 4752:4965: Configuring as mouse
[ 102.717] (II) evdev: HID 4752:4965: Configuring as keyboard
[ 102.717] (II) evdev: HID 4752:4965: Adding scrollwheel support
[ 102.717] (**) evdev: HID 4752:4965: YAxisMapping: buttons 4 and 5
[ 102.717] (**) evdev: HID 4752:4965: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 102.717] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.2/1-1.2:1.0/0003:4752:4965.0001/input/input2/event1"
[ 102.717] (II) XINPUT: Adding extended input device "HID 4752:4965" (type: KEYBOARD, id 8)
[ 102.717] (**) Option "xkb_rules" "evdev"
[ 102.718] (**) Option "xkb_model" "pc104"
[ 102.718] (**) Option "xkb_layout" "us"
[ 102.720] (II) evdev: HID 4752:4965: initialized for relative axes.
[ 102.720] (WW) evdev: HID 4752:4965: ignoring absolute axes.
[ 102.721] (**) HID 4752:4965: (accel) keeping acceleration scheme 1
[ 102.721] (**) HID 4752:4965: (accel) acceleration profile 0
[ 102.722] (**) HID 4752:4965: (accel) acceleration factor: 2.000
[ 102.722] (**) HID 4752:4965: (accel) acceleration threshold: 4
[ 102.725] (II) config/udev: Adding input device HID 4752:4965 (/dev/input/event2)
[ 102.725] (**) HID 4752:4965: Applying InputClass "evdev pointer catchall"
[ 102.725] (II) Using input driver 'evdev' for 'HID 4752:4965'
[ 102.725] (**) HID 4752:4965: always reports core events
[ 102.725] (**) evdev: HID 4752:4965: Device: "/dev/input/event2"
[ 102.725] (--) evdev: HID 4752:4965: Vendor 0x4752 Product 0x4965
[ 102.726] (--) evdev: HID 4752:4965: Found 9 mouse buttons
[ 102.726] (--) evdev: HID 4752:4965: Found scroll wheel(s)
[ 102.726] (--) evdev: HID 4752:4965: Found relative axes
[ 102.726] (--) evdev: HID 4752:4965: Found x and y relative axes
[ 102.726] (II) evdev: HID 4752:4965: Configuring as mouse
[ 102.726] (II) evdev: HID 4752:4965: Adding scrollwheel support
[ 102.726] (**) evdev: HID 4752:4965: YAxisMapping: buttons 4 and 5
[ 102.727] (**) evdev: HID 4752:4965: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 102.727] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.2/1-1.2:1.1/0003:4752:4965.0002/input/input3/event2"
[ 102.727] (II) XINPUT: Adding extended input device "HID 4752:4965" (type: MOUSE, id 9)
[ 102.727] (II) evdev: HID 4752:4965: initialized for relative axes.
[ 102.728] (**) HID 4752:4965: (accel) keeping acceleration scheme 1
[ 102.729] (**) HID 4752:4965: (accel) acceleration profile 0
[ 102.729] (**) HID 4752:4965: (accel) acceleration factor: 2.000
[ 102.729] (**) HID 4752:4965: (accel) acceleration threshold: 4
[ 102.731] (II) config/udev: Adding input device HID 4752:4965 (/dev/input/mouse0)
[ 102.732] (II) No input driver specified, ignoring this device.
[ 102.732] (II) This device may have been added with another device file.
[ 102.735] (II) config/udev: Adding input device MLK Silvercrest OM1008 (/dev/input/event3)
[ 102.735] (**) MLK Silvercrest OM1008: Applying InputClass "evdev pointer catchall"
[ 102.735] (**) MLK Silvercrest OM1008: Applying InputClass "evdev keyboard catchall"
[ 102.735] (II) Using input driver 'evdev' for 'MLK Silvercrest OM1008'
[ 102.736] (**) MLK Silvercrest OM1008: always reports core events
[ 102.736] (**) evdev: MLK Silvercrest OM1008: Device: "/dev/input/event3"
[ 102.736] (--) evdev: MLK Silvercrest OM1008: Vendor 0x4fc Product 0x538
[ 102.736] (--) evdev: MLK Silvercrest OM1008: Found 9 mouse buttons
[ 102.736] (--) evdev: MLK Silvercrest OM1008: Found scroll wheel(s)
[ 102.737] (--) evdev: MLK Silvercrest OM1008: Found relative axes
[ 102.737] (--) evdev: MLK Silvercrest OM1008: Found x and y relative axes
[ 102.737] (--) evdev: MLK Silvercrest OM1008: Found absolute axes
[ 102.737] (II) evdev: MLK Silvercrest OM1008: Forcing absolute x/y axes to exist.
[ 102.737] (--) evdev: MLK Silvercrest OM1008: Found keys
[ 102.737] (II) evdev: MLK Silvercrest OM1008: Configuring as mouse
[ 102.737] (II) evdev: MLK Silvercrest OM1008: Configuring as keyboard
[ 102.737] (II) evdev: MLK Silvercrest OM1008: Adding scrollwheel support
[ 102.737] (**) evdev: MLK Silvercrest OM1008: YAxisMapping: buttons 4 and 5
[ 102.737] (**) evdev: MLK Silvercrest OM1008: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 102.738] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.3/1-1.3:1.0/0003:04FC:0538.0003/input/input4/event3"
[ 102.738] (II) XINPUT: Adding extended input device "MLK Silvercrest OM1008" (type: KEYBOARD, id 10)
[ 102.738] (**) Option "xkb_rules" "evdev"
[ 102.738] (**) Option "xkb_model" "pc104"
[ 102.738] (**) Option "xkb_layout" "us"
[ 102.740] (II) evdev: MLK Silvercrest OM1008: initialized for relative axes.
[ 102.741] (WW) evdev: MLK Silvercrest OM1008: ignoring absolute axes.
[ 102.742] (**) MLK Silvercrest OM1008: (accel) keeping acceleration scheme 1
[ 102.742] (**) MLK Silvercrest OM1008: (accel) acceleration profile 0
[ 102.742] (**) MLK Silvercrest OM1008: (accel) acceleration factor: 2.000
[ 102.743] (**) MLK Silvercrest OM1008: (accel) acceleration threshold: 4
[ 102.745] (II) config/udev: Adding input device MLK Silvercrest OM1008 (/dev/input/mouse1)
[ 102.745] (II) No input driver specified, ignoring this device.
[ 102.746] (II) This device may have been added with another device file.
[ 102.748] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 102.748] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 102.748] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 102.749] (**) AT Translated Set 2 keyboard: always reports core events
[ 102.749] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 102.749] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 102.749] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 102.749] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 102.749] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 102.749] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 102.750] (**) Option "xkb_rules" "evdev"
[ 102.750] (**) Option "xkb_model" "pc104"
[ 102.750] (**) Option "xkb_layout" "us"
[ 102.755] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event7)
[ 102.755] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 102.755] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 102.755] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 102.755] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event7"
[ 102.756] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 102.756] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 102.756] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 102.756] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 102.756] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 102.756] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 102.757] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 102.757] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event7"
[ 102.757] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[ 102.757] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 102.758] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 102.759] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 102.759] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 102.759] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 102.761] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[ 102.761] (II) No input driver specified, ignoring this device.
[ 102.761] (II) This device may have been added with another device file.
[ 102.794] (EE)
[ 102.794] (EE) Backtrace:


dmesg


[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.0-4-ARCH (nobody@var-lib-archbuild-extra-i686-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 9 20:53:45 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000019fcffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000019fd0000-0x0000000019fdefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000019fdf000-0x0000000019fdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000019fe0000-0x0000000019ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffe0000-0x00000000ffffffff] reserved
[ 0.000000] Malformed early option 'apic'
[ 0.000000] Malformed early option 'apic'
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.2 present.
[ 0.000000] DMI: IBM 26458A0/26458A0, BIOS INET24WW 05/24/1999
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x19fd0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 010000000 mask FF8000000 write-back
[ 0.000000] 2 base 018000000 mask FFE000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x19800000-0x19bfffff]
[ 0.000000] [mem 0x19800000-0x19bfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x18000000-0x197fffff]
[ 0.000000] [mem 0x18000000-0x197fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x17ffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x17ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x19c00000-0x19fcffff]
[ 0.000000] [mem 0x19c00000-0x19fcffff] page 4k
[ 0.000000] BRK [0x01756000, 0x01756fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x18c1a000-0x19054fff]
[ 0.000000] IBM Thinkpad 600 Series 2645 detected: force use of acpi=noirq
[ 0.000000] ACPI: RSDP 000fd6e0 000014 (v00 IBM )
[ 0.000000] ACPI: RSDT 19fd0000 000028 (v01 IBM TP600R 00000001 00000000)
[ 0.000000] ACPI: FACP 19fd0100 000074 (v01 IBM TP600R 00000001 00000000)
[ 0.000000] ACPI: DSDT 19fd0200 00B501 (v01 IBM TP600R 0000001D MSFT 0100000B)
[ 0.000000] ACPI: FACS 19fdf000 000040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 415MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 19fd0000
[ 0.000000] low ram: 0 - 19fd0000
[ 0.000000] BRK [0x01757000, 0x01757fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x19fcffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x19fcffff]
[ 0.000000] On node 0 totalpages: 106350
[ 0.000000] free_area_init_node: node 0, pgdat c15b9100, node_mem_map d9c90020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 800 pages used for memmap
[ 0.000000] Normal zone: 102352 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xef08
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- reenabling.
[ 0.000000] Could not enable APIC!
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x1a000000-0xfffdffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @d9c7e000 s33152 r0 d24192 u57344
[ 0.000000] pcpu-alloc: s33152 r0 d24192 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 105518
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e2c326a9-b6c3-4360-9700-b9f991dcfda3 rw pci=noacpi lapic apic acpi=noirq apm=on pci=use_crs quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 851576 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 408840K/425400K available (4230K kernel code, 427K rwdata, 1268K rodata, 584K init, 948K bss, 16560K reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xda7d0000 - 0xff7fe000 ( 592 MB)
lowmem : 0xc0000000 - 0xd9fd0000 ( 415 MB)
.init : 0xc15cb000 - 0xc165d000 ( 584 kB)
.data : 0xc1421caa - 0xc15caf40 (1700 kB)
.text : 0xc1000000 - 0xc1421caa (4231 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=d9406000 soft=d9408000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 363.962 MHz processor
[ 0.003385] Calibrating delay loop (skipped), value calculated using timer frequency.. 728.25 BogoMIPS (lpj=1213206)
[ 0.003414] pid_max: default: 32768 minimum: 301
[ 0.003496] ACPI: Core revision 20131218
[ 0.042334] ACPI: All ACPI Tables successfully acquired
[ 0.042378] ACPI: setting ELCR to 0a00 (from 0800)
[ 0.043565] Security Framework initialized
[ 0.043638] Yama: becoming mindful.
[ 0.043761] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.043785] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.045428] Initializing cgroup subsys memory
[ 0.045495] Initializing cgroup subsys devices
[ 0.045514] Initializing cgroup subsys freezer
[ 0.045531] Initializing cgroup subsys net_cls
[ 0.045547] Initializing cgroup subsys blkio
[ 0.045749] mce: CPU supports 5 MCE banks
[ 0.045867] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
tlb_flushall_shift: 6
[ 0.062369] Freeing SMP alternatives memory: 16K (c165d000 - c1661000)
[ 0.067707] ftrace: allocating 18865 entries in 37 pages
[ 0.107489] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.107522] smpboot: SMP motherboard not detected
[ 0.107537] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.107548] smpboot: SMP disabled
[ 0.107635] Performance Events:
[ 0.107660] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.107672] no hardware sampling interrupt available.
[ 0.107688] p6 PMU driver.
[ 0.107709] ... version: 0
[ 0.107720] ... bit width: 32
[ 0.107731] ... generic registers: 2
[ 0.107743] ... value mask: 00000000ffffffff
[ 0.107755] ... max period: 000000007fffffff
[ 0.107766] ... fixed-purpose events: 0
[ 0.107776] ... event mask: 0000000000000003
[ 0.136722] x86: Booted up 1 node, 1 CPUs
[ 0.136755] smpboot: Total of 1 processors activated (728.25 BogoMIPS)
[ 0.137234] NMI watchdog: disabled (cpu0): not supported (no LAPIC?)
[ 0.138096] devtmpfs: initialized
[ 0.140270] PM: Registering ACPI NVS region [mem 0x19fdf000-0x19fdffff] (4096 bytes)
[ 0.150674] pinctrl core: initialized pinctrl subsystem
[ 0.150881] RTC time: 0:35:20, date: 04/10/14
[ 0.151277] NET: Registered protocol family 16
[ 0.152254] cpuidle: using governor ladder
[ 0.152275] cpuidle: using governor menu
[ 0.152820] ACPI: bus type PCI registered
[ 0.152844] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.158490] PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=7
[ 0.158511] PCI: Using configuration type 1 for base access
[ 0.165289] bio: create slab <bio-0> at 0
[ 0.166103] ACPI: Added _OSI(Module Device)
[ 0.166126] ACPI: Added _OSI(Processor Device)
[ 0.166142] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.166158] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.564825] ACPI: Interpreter enabled
[ 0.565242] ACPI: (supports S0 S1 S2 S3 S4 S5)
[ 0.565261] ACPI: Using PIC for interrupt routing
[ 0.568174] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.578009] ACPI: Power Resource [PVID] (on)
[ 0.582721] ACPI: Power Resource [PSIO] (on)
[ 0.585719] ACPI: Power Resource [PRSD] (off)
[ 0.678326] ACPI: Power Resource [PDCK] (on)
[ 0.688211] ACPI: Power Resource [PFN0] (off)
[ 0.689411] ACPI: Power Resource [PFN1] (off)
[ 0.697198] ACPI: \_PR_.CPU0: failed to get CPU APIC ID.
[ 0.725901] ACPI : EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
[ 0.727258] vgaarb: loaded
[ 0.727452] PCI: Probing PCI hardware
[ 0.727471] PCI: root bus 00: using default resources
[ 0.727485] PCI: Probing PCI hardware (bus 00)
[ 0.727775] PCI host bridge to bus 0000:00
[ 0.727808] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.727830] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.727850] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.727924] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
[ 0.727975] pci 0000:00:00.0: reg 0x10: [mem 0x40000000-0x43ffffff pref]
[ 0.728406] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
[ 0.728797] pci 0000:00:02.0: [104c:ac1d] type 02 class 0x060700
[ 0.728856] pci 0000:00:02.0: reg 0x10: [mem 0x50102000-0x50102fff]
[ 0.728938] pci 0000:00:02.0: supports D1 D2
[ 0.728959] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot
[ 0.729352] pci 0000:00:02.1: [104c:ac1d] type 02 class 0x060700
[ 0.729411] pci 0000:00:02.1: reg 0x10: [mem 0x50101000-0x50101fff]
[ 0.729491] pci 0000:00:02.1: supports D1 D2
[ 0.729512] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot
[ 0.729921] pci 0000:00:06.0: [1013:6001] type 00 class 0x040100
[ 0.729972] pci 0000:00:06.0: reg 0x10: [mem 0x50100000-0x50100fff]
[ 0.730063] pci 0000:00:06.0: reg 0x14: [mem 0x50000000-0x500fffff]
[ 0.730489] pci 0000:00:07.0: [8086:7110] type 00 class 0x068000
[ 0.730936] pci 0000:00:07.1: [8086:7111] type 00 class 0x010180
[ 0.731047] pci 0000:00:07.1: reg 0x20: [io 0xfcf0-0xfcff]
[ 0.731426] pci 0000:00:07.2: [8086:7112] type 00 class 0x0c0300
[ 0.731538] pci 0000:00:07.2: reg 0x20: [io 0x8400-0x841f]
[ 0.731917] pci 0000:00:07.3: [8086:7113] type 00 class 0x068000
[ 0.731942] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
[ 0.732105] pci 0000:00:07.3: quirk: [io 0xef00-0xef3f] claimed by PIIX4 ACPI
[ 0.732132] pci 0000:00:07.3: quirk: [io 0xefa0-0xefaf] claimed by PIIX4 SMB
[ 0.732158] pci 0000:00:07.3: PIIX4 devres B PIO at 02f8-02ff
[ 0.732180] pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
[ 0.732202] pci 0000:00:07.3: PIIX4 devres E PIO at 0538-053f
[ 0.732227] pci 0000:00:07.3: PIIX4 devres G PIO at 0130-013f
[ 0.732251] pci 0000:00:07.3: PIIX4 devres I PIO at 002e-002f
[ 0.732840] pci 0000:01:00.0: [10c8:0005] type 00 class 0x030000
[ 0.732895] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xe0ffffff pref]
[ 0.732932] pci 0000:01:00.0: reg 0x14: [mem 0x70000000-0x703fffff]
[ 0.732967] pci 0000:01:00.0: reg 0x18: [mem 0x70400000-0x704fffff]
[ 0.733088] pci 0000:01:00.0: supports D1 D2
[ 0.733429] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.733572] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.733600] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.733624] pci 0000:00:01.0: bridge window [mem 0x70000000-0xdfffffff]
[ 0.733649] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf7ffffff pref]
[ 0.733920] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
[ 0.734186] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 09
[ 0.734221] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 09
[ 0.734683] pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7110]
[ 0.734744] PCI: pci_cache_line_size set to 32 bytes
[ 0.734841] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.734861] e820: reserve RAM buffer [mem 0x19fd0000-0x1bffffff]
[ 0.735816] NetLabel: Initializing
[ 0.735836] NetLabel: domain hash size = 128
[ 0.735847] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.735950] NetLabel: unlabeled traffic allowed by default
[ 0.736431] Switched to clocksource pit
[ 0.791514] pnp: PnP ACPI init
[ 0.791674] ACPI: bus type PNP registered
[ 0.794059] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.794092] system 00:00: [mem 0x000c0000-0x000cbfff] could not be reserved
[ 0.794116] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.794140] system 00:00: [mem 0x00100000-0x19ffffff] could not be reserved
[ 0.794164] system 00:00: [mem 0xfffe0000-0xffffffff] has been reserved
[ 0.794195] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.794597] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.795110] pnp 00:02: [dma 2]
[ 0.795450] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.796089] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (disabled)
[ 0.797595] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.798849] pnp 00:05: [dma 3]
[ 0.799807] pnp 00:05: Plug and Play ACPI device, IDs IBM0071 PNP0511 (active)
[ 0.805040] pnp 00:06: Plug and Play ACPI device, IDs CSC0110 (active)
[ 0.813022] pnp 00:07: [dma 1]
[ 0.813048] pnp 00:07: [dma 0]
[ 0.813440] pnp 00:07: Plug and Play ACPI device, IDs CSC0100 (active)
[ 0.816071] pnp 00:08: Plug and Play ACPI device, IDs CSC0101 PNPb02f (active)
[ 0.820954] pnp 00:09: Plug and Play ACPI device, IDs CSC0103 (disabled)
[ 0.828874] pnp 00:0a: [dma 7]
[ 0.831974] pnp 00:0a: Plug and Play ACPI device, IDs IBM3765 (active)
[ 0.832476] pnp 00:0b: [dma 4]
[ 0.832715] pnp 00:0b: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.833004] pnp 00:0c: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.833449] system 00:0d: [io 0x15e0-0x15ef] has been reserved
[ 0.833478] system 00:0d: [io 0xef00-0xef3f] has been reserved
[ 0.833502] system 00:0d: [io 0xefa0-0xefaf] has been reserved
[ 0.833531] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.833933] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.834242] pnp 00:0f: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.834574] pnp 00:10: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
[ 0.834868] pnp 00:11: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.845702] pnp: PnP ACPI: found 18 devices
[ 0.845724] ACPI: bus type PNP unregistered
[ 0.898829] Switched to clocksource acpi_pm
[ 0.898997] pci 0000:00:02.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.899024] pci 0000:00:02.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.899049] pci 0000:00:02.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.899073] pci 0000:00:02.1: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.899095] pci 0000:00:02.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.899117] pci 0000:00:02.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.899139] pci 0000:00:02.1: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.899161] pci 0000:00:02.1: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.899206] pci 0000:00:02.0: BAR 15: assigned [mem 0x1c000000-0x1fffffff pref]
[ 0.899233] pci 0000:00:02.0: BAR 16: assigned [mem 0x20000000-0x23ffffff]
[ 0.899261] pci 0000:00:02.1: BAR 15: assigned [mem 0x24000000-0x27ffffff pref]
[ 0.899287] pci 0000:00:02.1: BAR 16: assigned [mem 0x28000000-0x2bffffff]
[ 0.899316] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x10ff]
[ 0.899343] pci 0000:00:02.0: BAR 14: assigned [io 0x1400-0x14ff]
[ 0.899369] pci 0000:00:02.1: BAR 13: assigned [io 0x1800-0x18ff]
[ 0.899396] pci 0000:00:02.1: BAR 14: assigned [io 0x1c00-0x1cff]
[ 0.899427] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.899451] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.899478] pci 0000:00:01.0: bridge window [mem 0x70000000-0xdfffffff]
[ 0.899503] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf7ffffff pref]
[ 0.899529] pci 0000:00:02.0: CardBus bridge to [bus 02-05]
[ 0.899550] pci 0000:00:02.0: bridge window [io 0x1000-0x10ff]
[ 0.899573] pci 0000:00:02.0: bridge window [io 0x1400-0x14ff]
[ 0.899598] pci 0000:00:02.0: bridge window [mem 0x1c000000-0x1fffffff pref]
[ 0.899622] pci 0000:00:02.0: bridge window [mem 0x20000000-0x23ffffff]
[ 0.899646] pci 0000:00:02.1: CardBus bridge to [bus 06-09]
[ 0.899665] pci 0000:00:02.1: bridge window [io 0x1800-0x18ff]
[ 0.899688] pci 0000:00:02.1: bridge window [io 0x1c00-0x1cff]
[ 0.899713] pci 0000:00:02.1: bridge window [mem 0x24000000-0x27ffffff pref]
[ 0.899736] pci 0000:00:02.1: bridge window [mem 0x28000000-0x2bffffff]
[ 0.899764] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.899785] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.899806] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.899827] pci_bus 0000:01: resource 1 [mem 0x70000000-0xdfffffff]
[ 0.899848] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf7ffffff pref]
[ 0.899869] pci_bus 0000:02: resource 0 [io 0x1000-0x10ff]
[ 0.899889] pci_bus 0000:02: resource 1 [io 0x1400-0x14ff]
[ 0.899910] pci_bus 0000:02: resource 2 [mem 0x1c000000-0x1fffffff pref]
[ 0.899931] pci_bus 0000:02: resource 3 [mem 0x20000000-0x23ffffff]
[ 0.899952] pci_bus 0000:06: resource 0 [io 0x1800-0x18ff]
[ 0.899972] pci_bus 0000:06: resource 1 [io 0x1c00-0x1cff]
[ 0.899993] pci_bus 0000:06: resource 2 [mem 0x24000000-0x27ffffff pref]
[ 0.900013] pci_bus 0000:06: resource 3 [mem 0x28000000-0x2bffffff]
[ 0.900411] NET: Registered protocol family 2
[ 0.901823] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.901938] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.902109] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.902337] TCP: reno registered
[ 0.902364] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.902425] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.902924] NET: Registered protocol family 1
[ 0.903034] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.903173] PCI: setting IRQ 11 as level-triggered
[ 0.903197] pci 0000:00:07.2: found PCI INT D -> IRQ 11
[ 0.903308] pci 0000:01:00.0: Boot video device
[ 0.903327] PCI: CLS 32 bytes, default 32
[ 0.903844] Unpacking initramfs...
[ 1.737204] Freeing initrd memory: 4332K (d8c1a000 - d9055000)
[ 1.737758] IBM machine detected. Enabling interrupts during APM calls.
[ 1.737775] apm: BIOS not found.
[ 1.738244] Scanning for low memory corruption every 60 seconds
[ 1.741065] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 1.826066] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.841391] zbud: loaded
[ 1.842313] VFS: Disk quotas dquot_6.5.2
[ 1.842793] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.844515] msgmni has been set to 807
[ 1.845113] Key type big_key registered
[ 1.846584] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.847022] io scheduler noop registered
[ 1.847042] io scheduler deadline registered
[ 1.847397] io scheduler cfq registered (default)
[ 1.848131] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.848285] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.848568] vesafb: mode is 1024x768x24, linelength=3072, pages=0
[ 1.848584] vesafb: scrolling: redraw
[ 1.848604] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.849879] vesafb: framebuffer at 0xe0000000, mapped to 0xda800000, using 2304k, total 2304k
[ 1.937774] Console: switching to colour frame buffer device 128x48
[ 2.024335] fb0: VESA VGA frame buffer device
[ 2.024496] intel_idle: does not run on family 6 model 6
[ 2.024713] GHES: HEST is not enabled!
[ 2.024839] isapnp: Scanning for PnP cards...
[ 2.338120] isapnp: No Plug & Play device found
[ 2.338575] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.339060] serial 00:03: [io 0x03e8-0x03ef]
[ 2.339203] serial 00:03: [io 0x02e8-0x02ef]
[ 2.339289] serial 00:03: unable to assign resources
[ 2.340253] serial: probe of 00:03 failed with error -16
[ 2.341449] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 921600) is a NS16550A
[ 2.344305] rtc_cmos 00:11: RTC can wake from S4
[ 2.344911] rtc_cmos 00:11: rtc core: registered rtc_cmos as rtc0
[ 2.344994] rtc_cmos 00:11: alarms up to one month, y3k, 242 bytes nvram
[ 2.345226] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.346210] TCP: cubic registered
[ 2.347671] NET: Registered protocol family 10
[ 2.349529] NET: Registered protocol family 17
[ 2.350797] Using IPI No-Shortcut mode
[ 2.351705] registered taskstats version 1
[ 2.352731] Magic number: 10:762:556
[ 2.353058] rtc_cmos 00:11: setting system clock to 2014-04-10 00:35:22 UTC (1397090122)
[ 2.353573] PM: Hibernation image not present or could not be loaded.
[ 2.358253] Freeing unused kernel memory: 584K (c15cb000 - c165d000)
[ 2.358414] Write protecting the kernel text: 4232k
[ 2.358638] Write protecting the kernel read-only data: 1272k
[ 2.429611] random: systemd-tmpfile urandom read with 13 bits of entropy available
[ 2.449261] systemd-udevd[40]: starting version 212
[ 2.740244] tsc: Refined TSC clocksource calibration: 363.959 MHz
[ 3.035590] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:MOU0] at 0x60,0x64 irq 1,12
[ 3.089748] Floppy drive(s): fd0 is 1.44M
[ 3.093599] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.094041] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.102254] FDC 0 is a National Semiconductor PC87306
[ 3.274435] SCSI subsystem initialized
[ 3.283085] ACPI: bus type USB registered
[ 3.295265] usbcore: registered new interface driver usbfs
[ 3.295479] usbcore: registered new interface driver hub
[ 3.300467] usbcore: registered new device driver usb
[ 3.312098] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.312371] uhci_hcd 0000:00:07.2: found PCI INT D -> IRQ 11
[ 3.312498] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 3.312550] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 3.312597] uhci_hcd 0000:00:07.2: detected 2 ports
[ 3.312680] uhci_hcd 0000:00:07.2: irq 11, io base 0x00008400
[ 3.323887] hub 1-0:1.0: USB hub found
[ 3.324228] hub 1-0:1.0: 2 ports detected
[ 3.374291] libata version 3.00 loaded.
[ 3.380874] ata_piix 0000:00:07.1: version 2.13
[ 3.406043] scsi0 : ata_piix
[ 3.415701] scsi1 : ata_piix
[ 3.416248] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfcf0 irq 14
[ 3.416271] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xfcf8 irq 15
[ 3.574202] ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW-242, UD22, max UDMA/33
[ 3.580877] ata2.00: configured for UDMA/33
[ 3.594266] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.633608] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 3.740401] Switched to clocksource tsc
[ 3.801598] hub 1-1:1.0: USB hub found
[ 3.802911] hub 1-1:1.0: 4 ports detected
[ 4.000823] ata1.00: ATA-5: IBM-DJSA-210, JS2OAB8A, max UDMA/66
[ 4.000854] ata1.00: 19640880 sectors, multi 0: LBA
[ 4.014128] ata1.00: configured for UDMA/33
[ 4.027658] scsi 0:0:0:0: Direct-Access ATA IBM-DJSA-210 JS2O PQ: 0 ANSI: 5
[ 4.033989] scsi 1:0:0:0: CD-ROM QSI CDRW/DVD SBW-242 UD22 PQ: 0 ANSI: 5
[ 4.081978] usb 1-1.1: new full-speed USB device number 3 using uhci_hcd
[ 4.119988] sd 0:0:0:0: [sda] 19640880 512-byte logical blocks: (10.0 GB/9.36 GiB)
[ 4.120675] sd 0:0:0:0: [sda] Write Protect is off
[ 4.120705] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.120945] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.122956] sr0: scsi3-mmc drive: 4x/24x writer cd/rw xa/form2 cdda tray
[ 4.122986] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.127724] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.184845] usb 1-1.1: Parent hub missing LPM exit latency info. Power management will be impacted.
[ 4.236323] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 4.237229] scsi2 : usb-storage 1-1.1:1.0
[ 4.239912] usbcore: registered new interface driver usb-storage
[ 4.288847] usb 1-1.2: new full-speed USB device number 4 using uhci_hcd
[ 4.426157] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.458565] usbcore: registered new interface driver usbhid
[ 4.458596] usbhid: USB HID core driver
[ 4.471883] usb 1-1.3: new low-speed USB device number 5 using uhci_hcd
[ 4.481050] input: HID 4752:4965 as /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.2/1-1.2:1.0/0003:4752:4965.0001/input/input2
[ 4.482040] hid-generic 0003:4752:4965.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 4752:4965] on usb-0000:00:07.2-1.2/input0
[ 4.488991] input: HID 4752:4965 as /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.2/1-1.2:1.1/0003:4752:4965.0002/input/input3
[ 4.489929] hid-generic 0003:4752:4965.0002: input,hidraw1: USB HID v1.10 Mouse [HID 4752:4965] on usb-0000:00:07.2-1.2/input1
[ 4.543222] sda: sda1 sda2 < sda5 sda6 >
[ 4.548080] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.662973] input: MLK Silvercrest OM1008 as /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1.3/1-1.3:1.0/0003:04FC:0538.0003/input/input4
[ 4.665835] hid-generic 0003:04FC:0538.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [MLK Silvercrest OM1008] on usb-0000:00:07.2-1.3/input0
[ 5.245890] scsi 2:0:0:0: Direct-Access Corsair Voyager GT 3.0 1.00 PQ: 0 ANSI: 4
[ 5.252852] sd 2:0:0:0: [sdb] 31334400 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 5.255823] sd 2:0:0:0: [sdb] Write Protect is off
[ 5.255863] sd 2:0:0:0: [sdb] Mode Sense: bf 00 00 00
[ 5.258850] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5.283866] sdb: sdb1
[ 5.297831] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 5.462606] random: nonblocking pool is initialized
[ 7.356562] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.135421] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 9.136591] systemd[1]: Detected architecture 'x86'.
[ 9.178572] systemd[1]: Set hostname to <wishthinkpad.loc>.
[ 11.354474] systemd[1]: Configuration file /etc/systemd/system/netctl@wlan_pcmcia_linksys_home.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[ 11.575779] systemd[1]: Starting Login Prompts.
[ 11.575954] systemd[1]: Reached target Login Prompts.
[ 11.576099] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 11.576902] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.577058] systemd[1]: Starting Remote File Systems.
[ 11.577196] systemd[1]: Reached target Remote File Systems.
[ 11.577326] systemd[1]: Expecting device sys-subsystem-net-devices-wlp6s0.device...
[ 11.577547] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 11.578444] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.578638] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 11.578983] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 11.579106] systemd[1]: Starting Paths.
[ 11.579230] systemd[1]: Reached target Paths.
[ 11.579356] systemd[1]: Starting Encrypted Volumes.
[ 11.579476] systemd[1]: Reached target Encrypted Volumes.
[ 11.579617] systemd[1]: Expecting device dev-disk-by\x2duuid-d71ec940\x2de12a\x2d4f00\x2d94e8\x2d5ce41f15b008.device...
[ 11.579752] systemd[1]: Expecting device dev-disk-by\x2duuid-c4b204ef\x2da07c\x2d4a25\x2d9379\x2da0d20a6daf8a.device...
[ 11.579875] systemd[1]: Starting Root Slice.
[ 11.635406] systemd[1]: Created slice Root Slice.
[ 11.635577] systemd[1]: Starting User and Session Slice.
[ 11.637612] systemd[1]: Created slice User and Session Slice.
[ 11.637771] systemd[1]: Starting Delayed Shutdown Socket.
[ 11.638118] systemd[1]: Listening on Delayed Shutdown Socket.
[ 11.638249] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 11.638487] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 11.638612] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 11.638893] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 11.639055] systemd[1]: Starting udev Kernel Socket.
[ 11.639279] systemd[1]: Listening on udev Kernel Socket.
[ 11.639427] systemd[1]: Starting udev Control Socket.
[ 11.639672] systemd[1]: Listening on udev Control Socket.
[ 11.639799] systemd[1]: Starting LVM2 metadata daemon socket.
[ 11.640263] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 11.640440] systemd[1]: Starting Journal Socket.
[ 11.640933] systemd[1]: Listening on Journal Socket.
[ 11.641158] systemd[1]: Starting System Slice.
[ 11.643036] systemd[1]: Created slice System Slice.
[ 11.643247] systemd[1]: Started File System Check on Root Device.
[ 11.643598] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 11.645524] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 11.645673] systemd[1]: Starting system-netctl.slice.
[ 11.647743] systemd[1]: Created slice system-netctl.slice.
[ 11.647901] systemd[1]: Starting system-getty.slice.
[ 11.649747] systemd[1]: Created slice system-getty.slice.
[ 11.649921] systemd[1]: Starting Setup Virtual Console...
[ 11.707619] systemd[1]: Started Load Kernel Modules.
[ 11.707958] systemd[1]: Starting udev Coldplug all Devices...
[ 11.713746] systemd[1]: Mounting Huge Pages File System...
[ 11.727629] systemd[1]: Mounting POSIX Message Queue File System...
[ 11.736069] systemd[1]: Mounted FUSE Control File System.
[ 11.797708] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 11.845308] systemd[1]: Starting Apply Kernel Variables...
[ 11.850978] systemd[1]: Mounting Debug File System...
[ 11.865943] systemd[1]: Mounting Configuration File System...
[ 12.374211] systemd[1]: Started Set Up Additional Binary Formats.
[ 12.374406] systemd[1]: Starting Journal Service...
[ 12.379600] systemd[1]: Started Journal Service.
[ 13.775249] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 14.329177] systemd-udevd[126]: starting version 212
[ 17.684421] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 17.687103] ACPI: Lid Switch [LID0]
[ 17.687677] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
[ 17.687712] ACPI: Sleep Button [SLPB]
[ 17.688336] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 17.688368] ACPI: Power Button [PWRF]
[ 17.762925] gameport gameport0: NS558 PnP Gameport is pnp00:08/gameport0, io 0x200, speed 677kHz
[ 17.804019] yenta_cardbus 0000:00:02.0: found PCI INT A -> IRQ 11
[ 17.804101] yenta_cardbus 0000:00:02.0: sharing IRQ 11 with 0000:01:00.0
[ 17.804177] yenta_cardbus 0000:00:02.0: CardBus bridge found [1014:00eb]
[ 17.804228] yenta_cardbus 0000:00:02.0: Enabling burst memory read transactions
[ 17.804251] yenta_cardbus 0000:00:02.0: Using CSCINT to route CSC interrupts to PCI
[ 17.804269] yenta_cardbus 0000:00:02.0: Routing CardBus interrupts to PCI
[ 17.804293] yenta_cardbus 0000:00:02.0: TI: mfunc 0xfba97543, devctl 0x62
[ 17.851774] Linux agpgart interface v0.103
[ 18.037738] yenta_cardbus 0000:00:02.0: ISA IRQ mask 0x0498, PCI irq 11
[ 18.037774] yenta_cardbus 0000:00:02.0: Socket status: 30000006
[ 18.049752] parport_pc 00:04: reported by Plug and Play ACPI
[ 18.049848] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 18.077397] yenta_cardbus 0000:00:02.1: found PCI INT B -> IRQ 11
[ 18.077535] yenta_cardbus 0000:00:02.1: CardBus bridge found [1014:00eb]
[ 18.077588] yenta_cardbus 0000:00:02.1: Using CSCINT to route CSC interrupts to PCI
[ 18.077607] yenta_cardbus 0000:00:02.1: Routing CardBus interrupts to PCI
[ 18.077631] yenta_cardbus 0000:00:02.1: TI: mfunc 0xfba97543, devctl 0x62
[ 18.097976] ACPI: AC Adapter [AC] (on-line)
[ 18.120243] NET: Registered protocol family 23
[ 18.214203] nsc-ircc, chip->init
[ 18.214235] nsc-ircc, Found chip at base=0x02e
[ 18.214278] nsc-ircc, driver loaded (Dag Brattli)
[ 18.214386] nsc_ircc_open(), can't get iobase of 0x3f8
[ 18.214445] nsc-ircc, Found chip at base=0x02e
[ 18.214488] nsc-ircc, driver loaded (Dag Brattli)
[ 18.214540] nsc_ircc_open(), can't get iobase of 0x3f8
[ 18.215271] nsc-ircc 00:05: disabled
[ 18.390618] thermal LNXTHERM:00: registered as thermal_zone0
[ 18.390651] ACPI: Thermal Zone [THM0] (73 C)
[ 18.398036] thermal LNXTHERM:01: registered as thermal_zone1
[ 18.398066] ACPI: Thermal Zone [THM2] (40 C)
[ 18.404938] thermal LNXTHERM:02: registered as thermal_zone2
[ 18.404969] ACPI: Thermal Zone [THM6] (27 C)
[ 18.411822] thermal LNXTHERM:03: registered as thermal_zone3
[ 18.411853] ACPI: Thermal Zone [THM7] (27 C)
[ 18.464771] ACPI: Fan [FN00] (off)
[ 18.468912] ACPI: Fan [FN01] (off)
[ 18.470885] ACPI: Fan [FN20] (off)
[ 18.474218] ACPI: Fan [FN21] (off)
[ 18.474732] ACPI: Fan [FN60] (off)
[ 18.475196] ACPI: Fan [FN61] (off)
[ 18.475696] ACPI: Fan [FN70] (off)
[ 18.476165] ACPI: Fan [FN71] (off)
[ 19.573256] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 19.575264] microcode: CPU0 sig=0x66a, pf=0x8, revision=0xa
[ 19.598408] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 19.605700] psmouse serio1: hgpk: ID: 10 00 64
[ 19.978022] mousedev: PS/2 mouse device common for all mice
[ 20.053468] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0b, buttons: 3/3
[ 20.082439] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input8
[ 21.571828] Adding 128484k swap on /dev/sda5. Priority:-1 extents:1 across:128484k FS
[ 21.936133] ppdev: user-space parallel port driver
[ 22.658493] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 22.996588] systemd-journald[111]: Received request to flush runtime journal from PID 1
[ 28.194329] ACPI: Fatal opcode executed
[ 28.199536] ACPI: Battery Slot [BAT0] (battery present)
[ 28.200443] ACPI: Battery Slot [BAT1] (battery absent)
[ 28.330503] yenta_cardbus 0000:00:02.1: ISA IRQ mask 0x0418, PCI irq 11
[ 28.330537] yenta_cardbus 0000:00:02.1: Socket status: 30000020
[ 28.342410] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 28.343324] piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
[ 28.344705] piix4_smbus: probe of 0000:00:07.3 failed with error -1
[ 28.350564] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 28.466897] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0x40000000
[ 28.540773] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af:
[ 28.541432] excluding 0x130-0x137 0x170-0x177 0x1f0-0x1f7 0x200-0x207 0x220-0x22f 0x370-0x377 0x388-0x38f
[ 28.542152] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff:
[ 28.542432] excluding 0x3f0-0x3ff 0x4d0-0x4d7
[ 28.542802] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
[ 28.543230] clean.
[ 28.547344] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 28.548001] excluding 0x130-0x137 0x170-0x177 0x1f0-0x1f7 0x200-0x207 0x220-0x22f 0x370-0x377 0x388-0x38f
[ 28.548713] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 28.548991] excluding 0x3f0-0x3ff 0x4d0-0x4d7
[ 28.549365] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 28.549796] clean.
[ 28.549926] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 28.556806] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
[ 28.557125] excluding 0xc40-0xc47
[ 28.557533] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff:
[ 28.557566] excluding 0xc0000-0xcbfff 0xf0000-0xfffff
[ 28.557749] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
[ 28.557818] excluding 0xa0000000-0xa0ffffff
[ 28.557955] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff:
[ 28.558035] clean.
[ 28.558165] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff:
[ 28.558651] clean.
[ 28.563918] clean.
[ 28.564165] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 28.564196] excluding 0xc0000-0xcbfff 0xf0000-0xfffff
[ 28.564382] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 28.564449] excluding 0xa0000000-0xa0ffffff
[ 28.564587] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 28.564667] clean.
[ 28.564800] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 28.565288] clean.
[ 29.220103] pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1
[ 29.220197] pci 0000:06:00.0: [168c:0013] type 00 class 0x020000
[ 29.220266] pci 0000:06:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]
[ 29.220929] pci 0000:06:00.0: BAR 0: assigned [mem 0x28000000-0x2800ffff]
[ 29.643759] cfg80211: Calling CRDA to update world regulatory domain
[ 30.163630] ath5k 0000:06:00.0: enabling device (0000 -> 0002)
[ 30.163958] ath5k 0000:06:00.0: registered as 'phy0'
[ 30.654931] ath: EEPROM regdomain: 0x809c
[ 30.654961] ath: EEPROM indicates we should expect a country code
[ 30.654976] ath: doing EEPROM country->regdmn map search
[ 30.654988] ath: country maps to regdmn code: 0x52
[ 30.655002] ath: Country alpha2 being used: CN
[ 30.655013] ath: Regpair used: 0x52
[ 30.720291] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 30.725632] ath5k: phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43)
[ 30.725666] ath5k: phy0: RF2112B 2GHz radio found (0x46)
[ 30.818308] systemd-udevd[133]: renamed network interface wlan0 to wlp6s0
[ 33.664086] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ 35.005669] wlp6s0: authenticate with 00:18:39:a0:db:3e
[ 35.017474] wlp6s0: send auth to 00:18:39:a0:db:3e (try 1/3)
[ 35.019100] wlp6s0: authenticated
[ 35.019750] ath5k 0000:06:00.0 wlp6s0: disabling HT as WMM/QoS is not supported by the AP
[ 35.019785] ath5k 0000:06:00.0 wlp6s0: disabling VHT as WMM/QoS is not supported by the AP
[ 35.022181] wlp6s0: associate with 00:18:39:a0:db:3e (try 1/3)
[ 35.024494] wlp6s0: RX AssocResp from 00:18:39:a0:db:3e (capab=0x411 status=0 aid=1)
[ 35.024760] wlp6s0: associated
[ 35.025065] IPv6: ADDRCONF(NETDEV_CHANGE): wlp6s0: link becomes ready
[ 39.294429] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 40.559992] nf_conntrack version 0.5.0 (6465 buckets, 25860 max)
[ 40.749219] Netfilter messages via NETLINK v0.30.
[ 40.760551] ctnetlink v0.93: registering with nfnetlink.

Thanks in advance.

Kind regards.

AndrzejL