Description:
When using the system (in particular working with graphic files) after some time - it can be days or hours - Xorg reset itself and then freezes completely. If I remove my mouse's usb nanoreceiver Xorg freezes istantly.


Additional info:

Xorg.0.log

[ 312.006] (II) config/udev: removing device Logitech USB Receiver
[ 312.011] (II) evdev: Logitech USB Receiver: Close
[ 312.011] (II) UnloadModule: "evdev"
[ 312.017] (II) config/udev: removing device Logitech USB Receiver
[ 312.023] (II) evdev: Logitech USB Receiver: Close
[ 312.023] (II) UnloadModule: "evdev"
(EE) [mi] EQ overflowing. Additional events will be discarded until existing events are processed.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x49) [0x81e47e9]
(EE) 1: /usr/bin/X (mieqEnqueue+0x223) [0x81c3173]
(EE) 2: /usr/bin/X (0x8048000+0x48235) [0x8090235]
(EE) 3: /usr/bin/X (xf86PostMotionEventM+0x24b) [0x80cd07b]
(EE) 4: /usr/bin/X (xf86PostMotionEvent+0xaa) [0x80cd2ca]
(EE) 5: /usr/lib/xorg/modules/input/synaptics_drv.so (0xb778d000+0x47c6) [0xb77917c6]
(EE) 6: /usr/lib/xorg/modules/input/synaptics_drv.so (0xb778d000+0x6cd1) [0xb7793cd1]
(EE) 7: /usr/bin/X (0x8048000+0x74271) [0x80bc271]
(EE) 8: /usr/bin/X (0x8048000+0x9fe53) [0x80e7e53]
(EE) 9: linux-gate.so.1 (__kernel_sigreturn+0x0) [0xb77bf400]
(EE) 10: linux-gate.so.1 (__kernel_vsyscall+0x10) [0xb77bf424]
(EE) 11: /usr/lib/libc.so.6 (ioctl+0x19) [0xb74cb179]
(EE) 12: /usr/lib/libdrm.so.2 (drmIoctl+0x34) [0xb76bce84]
(EE) 13: /usr/lib/libdrm.so.2 (drmCommandWriteRead+0x3c) [0xb76bfb2c]
(EE) 14: /usr/lib/libdrm_radeon.so.1 (0xb719a000+0x19fa) [0xb719b9fa]
(EE) 15: /usr/lib/libdrm_radeon.so.1 (0xb719a000+0x1c6e) [0xb719bc6e]
(EE) 16: /usr/lib/libdrm_radeon.so.1 (radeon_bo_map+0x1a) [0xb719d35a]
(EE) 17: /usr/lib/xorg/modules/drivers/radeon_drv.so (0xb71da000+0x1fd56) [0xb71f9d56]
(EE) 18: /usr/lib/xorg/modules/libexa.so (0xb71c2000+0x53dc) [0xb71c73dc]
(EE) 19: /usr/lib/xorg/modules/libexa.so (0xb71c2000+0x5791) [0xb71c7791]
(EE) 20: /usr/lib/xorg/modules/libexa.so (0xb71c2000+0x7ccc) [0xb71c9ccc]
(EE) 21: /usr/lib/xorg/modules/libexa.so (0xb71c2000+0x43b8) [0xb71c63b8]
(EE) 22: /usr/lib/xorg/modules/libexa.so (0xb71c2000+0x11a1b) [0xb71d3a1b]
(EE) 23: /usr/bin/X (0x8048000+0x11c8fd) [0x81648fd]
(EE) 24: /usr/bin/X (0x8048000+0x11e0ea) [0x81660ea]
(EE) 25: /usr/bin/X (doPolyText+0x30b) [0x807c5ab]
(EE) 26: /usr/bin/X (PolyText+0x6f) [0x807d62f]
(EE) 27: /usr/bin/X (0x8048000+0x2f0bb) [0x80770bb]
(EE) 28: /usr/bin/X (0x8048000+0x32135) [0x807a135]
(EE) 29: /usr/bin/X (0x8048000+0x1f6ba) [0x80676ba]
(EE) 30: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0xb73fc825]
(EE) 31: /usr/bin/X (0x8048000+0x1fa89) [0x8067a89]
(EE)
(EE) [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack.
(EE) [mi] mieq is *NOT* the cause. It is a victim.
(EE) [mi] EQ overflow continuing. 100 events have been dropped.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x49) [0x81e47e9]
(EE) 1: /usr/bin/X (mieqEnqueue+0xf8) [0x81c3048]
(EE) 2: /usr/bin/X (0x8048000+0x48235) [0x8090235]
(EE) 3: /usr/bin/X (xf86PostMotionEventM+0x24b) [0x80cd07b]
(EE) 4: /usr/bin/X (xf86PostMotionEvent+0xaa) [0x80cd2ca]
(EE) 5: /usr/lib/xorg/modules/input/synaptics_drv.so (0xb778d000+0x47c6) [0xb77917c6]
(EE) 6: /usr/lib/xorg/modules/input/synaptics_drv.so (0xb778d000+0x6cd1) [0xb7793cd1]
(EE) 7: /usr/bin/X (0x8048000+0x74271) [0x80bc271]
(EE) 8: /usr/bin/X (0x8048000+0x9fe53) [0x80e7e53]
(EE) 9: linux-gate.so.1 (__kernel_sigreturn+0x0) [0xb77bf400]
(EE) 10: linux-gate.so.1 (__kernel_vsyscall+0x10) [0xb77bf424]
(EE) 11: /usr/lib/libc.so.6 (ioctl+0x19) [0xb74cb179]
(EE) 12: /usr/lib/libdrm.so.2 (drmIoctl+0x34) [0xb76bce84]
(EE) 13: /usr/lib/libdrm.so.2 (drmCommandWriteRead+0x3c) [0xb76bfb2c]
(EE) 14: /usr/lib/libdrm_radeon.so.1 (0xb719a000+0x19fa) [0xb719b9fa]
(EE) 15: /usr/lib/libdrm_radeon.so.1 (0xb719a000+0x1c6e) [0xb719bc6e]
(EE) 16: /usr/lib/libdrm_radeon.so.1 (radeon_bo_map+0x1a) [0xb719d35a]
(EE) 17: /usr/lib/xorg/modules/drivers/radeon_drv.so (0xb71da000+0x1fd56) [0xb71f9d56]
(EE) 18: /usr/lib/xorg/modules/libexa.so (0xb71c2000+0x53dc) [0xb71c73dc]
(EE) 19: /usr/lib/xorg/modules/libexa.so (0xb71c2000+0x5791) [0xb71c7791]
(EE) 20: /usr/lib/xorg/modules/libexa.so (0xb71c2000+0x7ccc) [0xb71c9ccc]
(EE) 21: /usr/lib/xorg/modules/libexa.so (0xb71c2000+0x43b8) [0xb71c63b8]
(EE) 22: /usr/lib/xorg/modules/libexa.so (0xb71c2000+0x11a1b) [0xb71d3a1b]
(EE) 23: /usr/bin/X (0x8048000+0x11c8fd) [0x81648fd]
(EE) 24: /usr/bin/X (0x8048000+0x11e0ea) [0x81660ea]
(EE) 25: /usr/bin/X (doPolyText+0x30b) [0x807c5ab]
(EE) 26: /usr/bin/X (PolyText+0x6f) [0x807d62f]
(EE) 27: /usr/bin/X (0x8048000+0x2f0bb) [0x80770bb]
(EE) 28: /usr/bin/X (0x8048000+0x32135) [0x807a135]
(EE) 29: /usr/bin/X (0x8048000+0x1f6ba) [0x80676ba]
(EE) 30: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0xb73fc825]
(EE) 31: /usr/bin/X (0x8048000+0x1fa89) [0x8067a89]
(EE)
(EE) [mi] EQ overflow continuing. 200 events have been dropped.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x49) [0x81e47e9]
(EE) 1: /usr/bin/X (mieqEnqueue+0xf8) [0x81c3048]
(EE) 2: /usr/bin/X (0x8048000+0x48235) [0x8090235]
(EE) 3: /usr/bin/X (xf86PostMotionEventM+0x24b) [0x80cd07b]
(EE) 4: /usr/bin/X (xf86PostMotionEvent+0xaa) [0x80cd2ca]
(EE) 5: /usr/lib/xorg/modules/input/synaptics_drv.so (0xb778d000+0x47c6) [0xb77917c6]
(EE) 6: /usr/lib/xorg/modules/input/synaptics_drv.so (0xb778d000+0x6cd1) [0xb7793cd1]
(EE) 7: /usr/bin/X (0x8048000+0x74271) [0x80bc271]
(EE) 8: /usr/bin/X (0x8048000+0x9fe53) [0x80e7e53]
(EE) 9: linux-gate.so.1 (__kernel_sigreturn+0x0) [0xb77bf400]
(EE) 10: linux-gate.so.1 (__kernel_vsyscall+0x10) [0xb77bf424]
(EE) 11: /usr/lib/libc.so.6 (ioctl+0x19) [0xb74cb179]
(EE) 12: /usr/lib/libdrm.so.2 (drmIoctl+0x34) [0xb76bce84]
(EE) 13: /usr/lib/libdrm.so.2 (drmCommandWriteRead+0x3c) [0xb76bfb2c]
(EE) 14: /usr/lib/libdrm_radeon.so.1 (0xb719a000+0x19fa) [0xb719b9fa]
(EE) 15: /usr/lib/libdrm_radeon.so.1 (0xb719a000+0x1c6e) [0xb719bc6e]
(EE) 16: /usr/lib/libdrm_radeon.so.1 (radeon_bo_map+0x1a) [0xb719d35a]
(EE) 17: /usr/lib/xorg/modules/drivers/radeon_drv.so (0xb71da000+0x1fd56) [0xb71f9d56]
(EE) 18: /usr/lib/xorg/modules/libexa.so (0xb71c2000+0x53dc) [0xb71c73dc]
(EE) 19: /usr/lib/xorg/modules/libexa.so (0xb71c2000+0x5791) [0xb71c7791]
(EE) 20: /usr/lib/xorg/modules/libexa.so (0xb71c2000+0x7ccc) [0xb71c9ccc]
(EE) 21: /usr/lib/xorg/modules/libexa.so (0xb71c2000+0x43b8) [0xb71c63b8]
(EE) 22: /usr/lib/xorg/modules/libexa.so (0xb71c2000+0x11a1b) [0xb71d3a1b]
(EE) 23: /usr/bin/X (0x8048000+0x11c8fd) [0x81648fd]
(EE) 24: /usr/bin/X (0x8048000+0x11e0ea) [0x81660ea]
(EE) 25: /usr/bin/X (doPolyText+0x30b) [0x807c5ab]
(EE) 26: /usr/bin/X (PolyText+0x6f) [0x807d62f]
(EE) 27: /usr/bin/X (0x8048000+0x2f0bb) [0x80770bb]
(EE) 28: /usr/bin/X (0x8048000+0x32135) [0x807a135]
(EE) 29: /usr/bin/X (0x8048000+0x1f6ba) [0x80676ba]
(EE) 30: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0xb73fc825]
(EE) 31: /usr/bin/X (0x8048000+0x1fa89) [0x8067a89]
(EE)
(EE) [mi] EQ overflow continuing. 300 events have been dropped.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x49) [0x81e47e9]
(EE) 1: /usr/bin/X (mieqEnqueue+0xf8) [0x81c3048]
(EE) 2: /usr/bin/X (0x8048000+0x48235) [0x8090235]
(EE) 3: /usr/bin/X (xf86PostKeyEventM+0x8e) [0x80cd8be]
(EE) 4: /usr/bin/X (xf86PostKeyboardEvent+0x72) [0x80cdb62]
(EE) 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb77a7000+0x5351) [0xb77ac351]
(EE) 6: /usr/bin/X (0x8048000+0x74271) [0x80bc271]
(EE) 7: /usr/bin/X (0x8048000+0x9fe53) [0x80e7e53]
(EE) 8: linux-gate.so.1 (__kernel_sigreturn+0x0) [0xb77bf400]
(EE) 9: linux-gate.so.1 (__kernel_vsyscall+0x10) [0xb77bf424]
(EE) 10: /usr/lib/libc.so.6 (ioctl+0x19) [0xb



lspci -vv
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [40] Vendor Specific Information: Len=05 <?>
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
Kernel driver in use: agpgart-intel

00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: TWINHEAD INTERNATIONAL Corp Device 3580
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: TWINHEAD INTERNATIONAL Corp Device 3580
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:01.0 PCI bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to AGP Controller (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-0000bfff
Memory behind bridge: e0000000-e00fffff
Prefetchable memory behind bridge: aff00000-bfefffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:1d.0 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: TWINHEAD INTERNATIONAL Corp Device 24cc
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: TWINHEAD INTERNATIONAL Corp Device 24cc
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e880 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: TWINHEAD INTERNATIONAL Corp Device 24cc
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ec00 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: TWINHEAD INTERNATIONAL Corp Device c90a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at e02ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=0080
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=0e, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e0100000-e01fffff
Prefetchable memory behind bridge: 80000000-8bffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: lpc_ich

00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: TWINHEAD INTERNATIONAL Corp Device 24cc
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 8c000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix

00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
Subsystem: TWINHEAD INTERNATIONAL Corp Device 040a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at d800 [size=256]
Region 1: I/O ports at e000 [size=64]
Region 2: Memory at e02ff800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at e02ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: snd_intel8x0

00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
Subsystem: TWINHEAD INTERNATIONAL Corp Device 1009
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at e400 [size=256]
Region 1: I/O ports at e080 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: snd_intel8x0m

01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Radeon RV250 [Mobility FireGL 9000] (rev 02) (prog-if 00 [VGA controller])
Subsystem: TWINHEAD INTERNATIONAL Corp Device 0311
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at b0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at b000 [size=256]
Region 2: Memory at e00f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at e00c0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: radeon

02:01.0 Ethernet controller: Atheros Communications Inc. AR5413/AR5414 Wireless Network Adapter [AR5006X(S) 802.11abg] (rev 01)
Subsystem: Atheros Communications Inc. EnGenius EMP-8602 (400mw) or Compex WLM54AG
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at e01f0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: ath5k

02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: TWINHEAD INTERNATIONAL Corp Device 020b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at c800 [size=256]
Region 1: Memory at e01efc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: 8139too

02:03.0 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
Subsystem: TWINHEAD INTERNATIONAL Corp Device 060b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 20
Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 80000000-83ffffff (prefetchable)
Memory window 1: 94000000-97ffffff
I/O window 0: 0000c000-0000c0ff
I/O window 1: 0000c400-0000c4ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus

02:03.1 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
Subsystem: TWINHEAD INTERNATIONAL Corp Device 060b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 20
Region 0: Memory at 98000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 84000000-87ffffff (prefetchable)
Memory window 1: 9c000000-9fffffff
I/O window 0: 0000cc00-0000ccff
I/O window 1: 00001000-000010ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus

02:05.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev b8)
Subsystem: TWINHEAD INTERNATIONAL Corp Device 060a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 16
Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=0b, subordinate=0e, sec-latency=176
Memory window 0: 88000000-8bffffff (prefetchable)
Memory window 1: a4000000-a7ffffff
I/O window 0: 00001400-000014ff
I/O window 1: 00001800-000018ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus

02:05.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C551 IEEE 1394 Controller (prog-if 10 [OHCI])
Subsystem: TWINHEAD INTERNATIONAL Corp Device 060a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 17
Region 0: Memory at e01ef000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+
Kernel driver in use: firewire_ohci

03:00.0 USB controller: NEC Corporation OHCI USB Controller (rev 43) (prog-if 10 [OHCI])
Subsystem: Option N.V. Device 0010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at 94000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ohci_hcd

03:00.1 USB controller: NEC Corporation OHCI USB Controller (rev 43) (prog-if 10 [OHCI])
Subsystem: Option N.V. Device 0011
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 20
Region 0: Memory at 94001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd

0b:00.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 22, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 1: Memory at a4000000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd

0b:00.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 22, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 1: Memory at a4000100 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1420 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd


Steps to reproduce:
Add and remove an usb nanoreiver to an itronix gobook 260+ usb port