[ 4.421] X.Org X Server 1.11.3 Release Date: 2011-12-16 [ 4.421] X Protocol Version 11, Revision 0 [ 4.421] Build Operating System: Linux 3.1.5-1-ARCH x86_64 [ 4.421] Current Operating System: Linux ratham 3.1.5-1-ARCH #1 SMP PREEMPT Sat Dec 10 14:43:09 CET 2011 x86_64 [ 4.421] Kernel command line: root=/dev/sda1 ro [ 4.421] Build Date: 17 December 2011 09:17:41AM [ 4.421] [ 4.421] Current version of pixman: 0.24.0 [ 4.421] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 4.421] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 4.422] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 17 13:40:26 2011 [ 4.424] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 4.425] (==) No Layout section. Using the first Screen section. [ 4.425] (==) No screen section available. Using defaults. [ 4.425] (**) |-->Screen "Default Screen Section" (0) [ 4.425] (**) | |-->Monitor "" [ 4.426] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 4.426] (==) Automatically adding devices [ 4.426] (==) Automatically enabling devices [ 4.428] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 4.428] Entry deleted from font path. [ 4.431] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ [ 4.431] (==) ModulePath set to "/usr/lib/xorg/modules" [ 4.431] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 4.431] (II) Loader magic: 0x7ccae0 [ 4.431] (II) Module ABI versions: [ 4.431] X.Org ANSI C Emulation: 0.4 [ 4.431] X.Org Video Driver: 11.0 [ 4.431] X.Org XInput driver : 13.0 [ 4.431] X.Org Server Extension : 6.0 [ 4.432] (--) PCI:*(0:0:2:0) 8086:2a42:1043:1862 rev 7, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8 [ 4.432] (--) PCI: (0:0:2:1) 8086:2a43:1043:1862 rev 7, Mem @ 0xfe800000/1048576 [ 4.432] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 4.432] (II) LoadModule: "extmod" [ 4.433] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 4.435] (II) Module extmod: vendor="X.Org Foundation" [ 4.435] compiled for 1.11.3, module version = 1.0.0 [ 4.435] Module class: X.Org Server Extension [ 4.435] ABI class: X.Org Server Extension, version 6.0 [ 4.435] (II) Loading extension MIT-SCREEN-SAVER [ 4.435] (II) Loading extension XFree86-VidModeExtension [ 4.435] (II) Loading extension XFree86-DGA [ 4.435] (II) Loading extension DPMS [ 4.435] (II) Loading extension XVideo [ 4.435] (II) Loading extension XVideo-MotionCompensation [ 4.435] (II) Loading extension X-Resource [ 4.435] (II) LoadModule: "dbe" [ 4.435] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 4.435] (II) Module dbe: vendor="X.Org Foundation" [ 4.435] compiled for 1.11.3, module version = 1.0.0 [ 4.435] Module class: X.Org Server Extension [ 4.435] ABI class: X.Org Server Extension, version 6.0 [ 4.436] (II) Loading extension DOUBLE-BUFFER [ 4.436] (II) LoadModule: "glx" [ 4.436] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 4.438] (II) Module glx: vendor="X.Org Foundation" [ 4.438] compiled for 1.11.3, module version = 1.0.0 [ 4.438] ABI class: X.Org Server Extension, version 6.0 [ 4.438] (==) AIGLX enabled [ 4.438] (II) Loading extension GLX [ 4.438] (II) LoadModule: "record" [ 4.438] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 4.439] (II) Module record: vendor="X.Org Foundation" [ 4.439] compiled for 1.11.3, module version = 1.13.0 [ 4.439] Module class: X.Org Server Extension [ 4.439] ABI class: X.Org Server Extension, version 6.0 [ 4.439] (II) Loading extension RECORD [ 4.439] (II) LoadModule: "dri" [ 4.439] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 4.441] (II) Module dri: vendor="X.Org Foundation" [ 4.441] compiled for 1.11.3, module version = 1.0.0 [ 4.441] ABI class: X.Org Server Extension, version 6.0 [ 4.441] (II) Loading extension XFree86-DRI [ 4.441] (II) LoadModule: "dri2" [ 4.441] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 4.442] (II) Module dri2: vendor="X.Org Foundation" [ 4.442] compiled for 1.11.3, module version = 1.2.0 [ 4.442] ABI class: X.Org Server Extension, version 6.0 [ 4.442] (II) Loading extension DRI2 [ 4.442] (==) Matched intel as autoconfigured driver 0 [ 4.442] (==) Matched vesa as autoconfigured driver 1 [ 4.442] (==) Matched fbdev as autoconfigured driver 2 [ 4.442] (==) Assigned the driver to the xf86ConfigLayout [ 4.442] (II) LoadModule: "intel" [ 4.444] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 4.449] (II) Module intel: vendor="X.Org Foundation" [ 4.449] compiled for 1.11.2, module version = 2.17.0 [ 4.449] Module class: X.Org Video Driver [ 4.449] ABI class: X.Org Video Driver, version 11.0 [ 4.449] (II) LoadModule: "vesa" [ 4.449] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 4.450] (II) Module vesa: vendor="X.Org Foundation" [ 4.450] compiled for 1.11.1, module version = 2.3.0 [ 4.450] Module class: X.Org Video Driver [ 4.450] ABI class: X.Org Video Driver, version 11.0 [ 4.450] (II) LoadModule: "fbdev" [ 4.451] (WW) Warning, couldn't open module fbdev [ 4.451] (II) UnloadModule: "fbdev" [ 4.451] (II) Unloading fbdev [ 4.451] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 4.451] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server [ 4.451] (II) VESA: driver for VESA chipsets: vesa [ 4.451] (++) using VT number 7 [ 4.459] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 4.459] (WW) Falling back to old probe method for vesa [ 4.459] drmOpenDevice: node name is /dev/dri/card0 [ 4.459] drmOpenDevice: open result is 8, (OK) [ 4.459] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 4.459] drmOpenDevice: node name is /dev/dri/card0 [ 4.459] drmOpenDevice: open result is 8, (OK) [ 4.459] drmOpenByBusid: drmOpenMinor returns 8 [ 4.459] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 4.459] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 4.459] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 4.459] (==) intel(0): RGB weight 888 [ 4.459] (==) intel(0): Default visual is TrueColor [ 4.459] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45 [ 4.459] (--) intel(0): Chipset: "GM45" [ 4.459] (**) intel(0): Relaxed fencing enabled [ 4.459] (**) intel(0): Wait on SwapBuffers? enabled [ 4.459] (**) intel(0): Triple buffering? enabled [ 4.459] (**) intel(0): Framebuffer tiled [ 4.459] (**) intel(0): Pixmaps tiled [ 4.459] (**) intel(0): 3D buffers tiled [ 4.459] (**) intel(0): SwapBuffers wait enabled [ 4.459] (==) intel(0): video overlay key set to 0x101fe [ 4.459] (II) intel(0): Output LVDS1 has no monitor section [ 4.460] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 [ 4.473] (II) intel(0): Output VGA1 has no monitor section [ 4.679] (II) intel(0): Output HDMI1 has no monitor section [ 4.720] (II) intel(0): Output DP1 has no monitor section [ 4.760] (II) intel(0): Output DP2 has no monitor section [ 4.760] (II) intel(0): EDID for output LVDS1 [ 4.760] (II) intel(0): Manufacturer: AUO Model: 102c Serial#: 0 [ 4.760] (II) intel(0): Year: 2008 Week: 1 [ 4.760] (II) intel(0): EDID Version: 1.3 [ 4.760] (II) intel(0): Digital Display Input [ 4.760] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16 [ 4.760] (II) intel(0): Gamma: 2.20 [ 4.760] (II) intel(0): No DPMS capabilities specified [ 4.760] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 4.760] (II) intel(0): First detailed timing is preferred mode [ 4.760] (II) intel(0): redX: 0.607 redY: 0.351 greenX: 0.330 greenY: 0.619 [ 4.760] (II) intel(0): blueX: 0.149 blueY: 0.104 whiteX: 0.302 whiteY: 0.321 [ 4.760] (II) intel(0): Manufacturer's mask: 0 [ 4.760] (II) intel(0): Supported detailed timing: [ 4.760] (II) intel(0): clock: 72.0 MHz Image Size: 293 x 164 mm [ 4.760] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1494 h_border: 0 [ 4.760] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 803 v_border: 0 [ 4.760] (II) intel(0): Unknown vendor-specific block f [ 4.760] (II) intel(0): AUO [ 4.760] (II) intel(0): B133XW01 V0 [ 4.760] (II) intel(0): EDID (in hex): [ 4.760] (II) intel(0): 00ffffffffffff0006af2c1000000000 [ 4.760] (II) intel(0): 01120103801d10780aba659b59549e26 [ 4.760] (II) intel(0): 1a4d5200000001010101010101010101 [ 4.760] (II) intel(0): 010101010101201c5680500023303020 [ 4.760] (II) intel(0): 360025a4100000180000000f00000000 [ 4.760] (II) intel(0): 00000000000000000020000000fe0041 [ 4.760] (II) intel(0): 554f0a202020202020202020000000fe [ 4.760] (II) intel(0): 004231333358573031205630200a00bc [ 4.760] (II) intel(0): EDID vendor "AUO", prod id 4140 [ 4.760] (II) intel(0): Printing DDC gathered Modelines: [ 4.760] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz) [ 4.761] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 4.761] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 4.761] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 4.761] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 4.761] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 4.761] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 4.761] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 4.761] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 4.761] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 4.761] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 4.761] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 4.761] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 4.761] (II) intel(0): Printing probed modes for output LVDS1 [ 4.761] (II) intel(0): Modeline "1366x768"x60.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz) [ 4.761] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 4.761] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 4.761] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 4.761] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 4.780] (II) intel(0): EDID for output VGA1 [ 4.985] (II) intel(0): EDID for output HDMI1 [ 4.985] (II) intel(0): Manufacturer: DEL Model: f016 Serial#: 843331660 [ 4.986] (II) intel(0): Year: 2009 Week: 31 [ 4.986] (II) intel(0): EDID Version: 1.3 [ 4.986] (II) intel(0): Digital Display Input [ 4.986] (II) intel(0): Max Image Size [cm]: horiz.: 52 vert.: 32 [ 4.986] (II) intel(0): Gamma: 2.20 [ 4.986] (II) intel(0): DPMS capabilities: StandBy Suspend Off [ 4.986] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 4.986] (II) intel(0): First detailed timing is preferred mode [ 4.986] (II) intel(0): redX: 0.680 redY: 0.310 greenX: 0.206 greenY: 0.693 [ 4.986] (II) intel(0): blueX: 0.151 blueY: 0.055 whiteX: 0.313 whiteY: 0.329 [ 4.986] (II) intel(0): Supported established timings: [ 4.986] (II) intel(0): 720x400@70Hz [ 4.986] (II) intel(0): 640x480@60Hz [ 4.986] (II) intel(0): 640x480@75Hz [ 4.986] (II) intel(0): 800x600@60Hz [ 4.986] (II) intel(0): 800x600@75Hz [ 4.986] (II) intel(0): 1024x768@60Hz [ 4.986] (II) intel(0): 1024x768@75Hz [ 4.986] (II) intel(0): 1280x1024@75Hz [ 4.986] (II) intel(0): Manufacturer's mask: 0 [ 4.986] (II) intel(0): Supported standard timings: [ 4.986] (II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 4.986] (II) intel(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 4.986] (II) intel(0): #2: hsize: 1920 vsize 1200 refresh: 60 vid: 209 [ 4.986] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 4.986] (II) intel(0): Supported detailed timing: [ 4.986] (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm [ 4.986] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 4.986] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0 [ 4.986] (II) intel(0): Serial No: C592M97U2D8L [ 4.986] (II) intel(0): Monitor name: DELL U2410 [ 4.986] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz [ 4.986] (II) intel(0): Supported detailed timing: [ 4.986] (II) intel(0): clock: 148.5 MHz Image Size: 518 x 324 mm [ 4.986] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 4.986] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 4.986] (II) intel(0): Supported detailed timing: [ 4.986] (II) intel(0): clock: 74.2 MHz Image Size: 518 x 324 mm [ 4.986] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 4.986] (II) intel(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0 [ 4.986] (II) intel(0): Supported detailed timing: [ 4.986] (II) intel(0): clock: 74.2 MHz Image Size: 518 x 324 mm [ 4.986] (II) intel(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0 [ 4.986] (II) intel(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0 [ 4.986] (II) intel(0): Supported detailed timing: [ 4.986] (II) intel(0): clock: 27.0 MHz Image Size: 518 x 324 mm [ 4.986] (II) intel(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0 [ 4.986] (II) intel(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0 [ 4.986] (II) intel(0): Number of EDID sections to follow: 1 [ 4.986] (II) intel(0): EDID (in hex): [ 4.986] (II) intel(0): 00ffffffffffff0010ac16f04c384432 [ 4.986] (II) intel(0): 1f13010380342078ea1ec5ae4f34b126 [ 4.986] (II) intel(0): 0e5054a54b008180a940d100714f0101 [ 4.986] (II) intel(0): 010101010101283c80a070b023403020 [ 4.986] (II) intel(0): 360006442100001a000000ff00433539 [ 4.986] (II) intel(0): 324d3937553244384c0a000000fc0044 [ 4.986] (II) intel(0): 454c4c2055323431300a2020000000fd [ 4.986] (II) intel(0): 00384c1e5111000a2020202020200155 [ 4.986] (II) intel(0): 020329f15090050403020716011f1213 [ 4.986] (II) intel(0): 14201511062309070767030c00100038 [ 4.986] (II) intel(0): 2d83010000e3050301023a801871382d [ 4.986] (II) intel(0): 40582c450006442100001e011d801871 [ 4.986] (II) intel(0): 1c1620582c250006442100009e011d00 [ 4.986] (II) intel(0): 7251d01e206e28550006442100001e8c [ 4.986] (II) intel(0): 0ad08a20e02d10103e96000644210000 [ 4.986] (II) intel(0): 1800000000000000000000000000003e [ 4.986] (II) intel(0): Printing probed modes for output HDMI1 [ 4.986] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) [ 4.986] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz) [ 4.986] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) [ 4.986] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 4.986] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 4.986] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 4.986] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) [ 4.986] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 4.986] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [ 4.986] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 4.986] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [ 4.986] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 4.986] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 5.026] (II) intel(0): EDID for output DP1 [ 5.066] (II) intel(0): EDID for output DP2 [ 5.066] (II) intel(0): Output LVDS1 connected [ 5.066] (II) intel(0): Output VGA1 disconnected [ 5.066] (II) intel(0): Output HDMI1 connected [ 5.066] (II) intel(0): Output DP1 disconnected [ 5.066] (II) intel(0): Output DP2 disconnected [ 5.066] (II) intel(0): Using fuzzy aspect match for initial modes [ 5.066] (II) intel(0): Output LVDS1 using initial mode 1024x768 [ 5.066] (II) intel(0): Output HDMI1 using initial mode 1024x768 [ 5.066] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 5.066] (II) intel(0): Kernel page flipping support detected, enabling [ 5.066] (**) intel(0): Display dimensions: (290, 160) mm [ 5.066] (**) intel(0): DPI set to (89, 121) [ 5.066] (II) Loading sub module "fb" [ 5.066] (II) LoadModule: "fb" [ 5.067] (II) Loading /usr/lib/xorg/modules/libfb.so [ 5.068] (II) Module fb: vendor="X.Org Foundation" [ 5.068] compiled for 1.11.3, module version = 1.0.0 [ 5.068] ABI class: X.Org ANSI C Emulation, version 0.4 [ 5.068] (II) Loading sub module "dri2" [ 5.068] (II) LoadModule: "dri2" [ 5.068] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 5.068] (II) Module dri2: vendor="X.Org Foundation" [ 5.068] compiled for 1.11.3, module version = 1.2.0 [ 5.068] ABI class: X.Org Server Extension, version 6.0 [ 5.068] (II) UnloadModule: "vesa" [ 5.068] (II) Unloading vesa [ 5.068] (==) Depth 24 pixmap format is 32 bpp [ 5.068] (II) intel(0): [DRI2] Setup complete [ 5.069] (II) intel(0): [DRI2] DRI driver: i965 [ 5.069] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled [ 5.089] (II) UXA(0): Driver registered support for the following operations: [ 5.089] (II) solid [ 5.089] (II) copy [ 5.089] (II) composite (RENDER acceleration) [ 5.089] (II) put_image [ 5.089] (II) get_image [ 5.089] (==) intel(0): Backing store disabled [ 5.089] (==) intel(0): Silken mouse enabled [ 5.089] (II) intel(0): Initializing HW Cursor [ 5.830] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 5.831] (==) intel(0): DPMS enabled [ 5.831] (==) intel(0): Intel XvMC decoder enabled [ 5.831] (II) intel(0): Set up textured video [ 5.831] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 5.831] (II) intel(0): direct rendering: DRI2 Enabled [ 5.831] (==) intel(0): hotplug detection: "enabled" [ 5.831] (--) RandR disabled [ 5.831] (II) Initializing built-in extension Generic Event Extension [ 5.831] (II) Initializing built-in extension SHAPE [ 5.831] (II) Initializing built-in extension MIT-SHM [ 5.831] (II) Initializing built-in extension XInputExtension [ 5.831] (II) Initializing built-in extension XTEST [ 5.831] (II) Initializing built-in extension BIG-REQUESTS [ 5.831] (II) Initializing built-in extension SYNC [ 5.831] (II) Initializing built-in extension XKEYBOARD [ 5.831] (II) Initializing built-in extension XC-MISC [ 5.831] (II) Initializing built-in extension SECURITY [ 5.831] (II) Initializing built-in extension XINERAMA [ 5.831] (II) Initializing built-in extension XFIXES [ 5.831] (II) Initializing built-in extension RENDER [ 5.831] (II) Initializing built-in extension RANDR [ 5.831] (II) Initializing built-in extension COMPOSITE [ 5.831] (II) Initializing built-in extension DAMAGE [ 5.857] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 5.857] (II) AIGLX: enabled GLX_INTEL_swap_event [ 5.857] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 5.857] (II) AIGLX: enabled GLX_SGI_make_current_read [ 5.857] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 5.857] (II) AIGLX: Loaded and initialized i965 [ 5.857] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 5.858] (II) intel(0): Setting screen physical size to 270 x 203 [ 6.048] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 6.048] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 6.048] (II) LoadModule: "evdev" [ 6.049] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 6.049] (II) Module evdev: vendor="X.Org Foundation" [ 6.049] compiled for 1.10.99.902, module version = 2.6.0 [ 6.049] Module class: X.Org XInput Driver [ 6.049] ABI class: X.Org XInput driver, version 13.0 [ 6.049] (II) Using input driver 'evdev' for 'Power Button' [ 6.049] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 6.049] (**) Power Button: always reports core events [ 6.049] (**) Power Button: Device: "/dev/input/event3" [ 6.049] (--) Power Button: Found keys [ 6.050] (II) Power Button: Configuring as keyboard [ 6.050] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 6.050] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 6.050] (**) Option "xkb_rules" "evdev" [ 6.050] (**) Option "xkb_model" "evdev" [ 6.050] (**) Option "xkb_layout" "dvorak" [ 6.088] (II) config/udev: Adding input device Video Bus (/dev/input/event14) [ 6.088] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 6.088] (II) Using input driver 'evdev' for 'Video Bus' [ 6.088] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 6.089] (**) Video Bus: always reports core events [ 6.089] (**) Video Bus: Device: "/dev/input/event14" [ 6.089] (--) Video Bus: Found keys [ 6.089] (II) Video Bus: Configuring as keyboard [ 6.089] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input14/event14" [ 6.089] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 6.089] (**) Option "xkb_rules" "evdev" [ 6.089] (**) Option "xkb_model" "evdev" [ 6.089] (**) Option "xkb_layout" "dvorak" [ 6.089] (II) config/udev: Adding input device Lid Switch (/dev/input/event2) [ 6.089] (II) No input driver/identifier specified (ignoring) [ 6.090] (II) config/udev: Adding input device Sleep Button (/dev/input/event1) [ 6.090] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 6.090] (II) Using input driver 'evdev' for 'Sleep Button' [ 6.090] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 6.090] (**) Sleep Button: always reports core events [ 6.090] (**) Sleep Button: Device: "/dev/input/event1" [ 6.090] (--) Sleep Button: Found keys [ 6.090] (II) Sleep Button: Configuring as keyboard [ 6.090] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1" [ 6.090] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 6.090] (**) Option "xkb_rules" "evdev" [ 6.090] (**) Option "xkb_model" "evdev" [ 6.090] (**) Option "xkb_layout" "dvorak" [ 6.091] (II) config/udev: Adding input device HDA Intel HDMI/DP (/dev/input/event6) [ 6.091] (II) No input driver/identifier specified (ignoring) [ 6.091] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7) [ 6.091] (II) No input driver/identifier specified (ignoring) [ 6.092] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event8) [ 6.092] (II) No input driver/identifier specified (ignoring) [ 6.092] (II) config/udev: Adding input device HID 05f3:0007 (/dev/input/event11) [ 6.092] (**) HID 05f3:0007: Applying InputClass "evdev keyboard catchall" [ 6.092] (II) Using input driver 'evdev' for 'HID 05f3:0007' [ 6.092] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 6.092] (**) HID 05f3:0007: always reports core events [ 6.092] (**) HID 05f3:0007: Device: "/dev/input/event11" [ 6.092] (--) HID 05f3:0007: Found keys [ 6.092] (II) HID 05f3:0007: Configuring as keyboard [ 6.092] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.2/6-2.2:1.0/input/input11/event11" [ 6.093] (II) XINPUT: Adding extended input device "HID 05f3:0007" (type: KEYBOARD, id 9) [ 6.093] (**) Option "xkb_rules" "evdev" [ 6.093] (**) Option "xkb_model" "evdev" [ 6.093] (**) Option "xkb_layout" "dvorak" [ 6.093] (II) config/udev: Adding input device HID 05f3:0007 (/dev/input/event12) [ 6.093] (**) HID 05f3:0007: Applying InputClass "evdev keyboard catchall" [ 6.093] (II) Using input driver 'evdev' for 'HID 05f3:0007' [ 6.093] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 6.093] (**) HID 05f3:0007: always reports core events [ 6.093] (**) HID 05f3:0007: Device: "/dev/input/event12" [ 6.094] (--) HID 05f3:0007: Found keys [ 6.094] (II) HID 05f3:0007: Configuring as keyboard [ 6.094] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.2/6-2.2:1.1/input/input12/event12" [ 6.094] (II) XINPUT: Adding extended input device "HID 05f3:0007" (type: KEYBOARD, id 10) [ 6.094] (**) Option "xkb_rules" "evdev" [ 6.094] (**) Option "xkb_model" "evdev" [ 6.094] (**) Option "xkb_layout" "dvorak" [ 6.094] (II) config/udev: Adding input device Logitech USB Trackball (/dev/input/event13) [ 6.094] (**) Logitech USB Trackball: Applying InputClass "evdev pointer catchall" [ 6.094] (II) Using input driver 'evdev' for 'Logitech USB Trackball' [ 6.094] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 6.095] (**) Logitech USB Trackball: always reports core events [ 6.095] (**) Logitech USB Trackball: Device: "/dev/input/event13" [ 6.095] (--) Logitech USB Trackball: Found 9 mouse buttons [ 6.095] (--) Logitech USB Trackball: Found relative axes [ 6.095] (--) Logitech USB Trackball: Found x and y relative axes [ 6.095] (II) Logitech USB Trackball: Configuring as mouse [ 6.095] (**) Logitech USB Trackball: YAxisMapping: buttons 4 and 5 [ 6.095] (**) Logitech USB Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 6.095] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2.3/6-2.3:1.0/input/input13/event13" [ 6.095] (II) XINPUT: Adding extended input device "Logitech USB Trackball" (type: MOUSE, id 11) [ 6.095] (II) Logitech USB Trackball: initialized for relative axes. [ 6.095] (**) Logitech USB Trackball: (accel) keeping acceleration scheme 1 [ 6.095] (**) Logitech USB Trackball: (accel) acceleration profile 0 [ 6.095] (**) Logitech USB Trackball: (accel) acceleration factor: 2.000 [ 6.095] (**) Logitech USB Trackball: (accel) acceleration threshold: 4 [ 6.095] (II) config/udev: Adding input device Logitech USB Trackball (/dev/input/mouse2) [ 6.095] (II) No input driver/identifier specified (ignoring) [ 6.096] (II) config/udev: Adding input device Targus USB Mouse (/dev/input/event10) [ 6.096] (**) Targus USB Mouse: Applying InputClass "evdev pointer catchall" [ 6.096] (II) Using input driver 'evdev' for 'Targus USB Mouse' [ 6.096] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 6.096] (**) Targus USB Mouse: always reports core events [ 6.096] (**) Targus USB Mouse: Device: "/dev/input/event10" [ 6.096] (--) Targus USB Mouse: Found 3 mouse buttons [ 6.096] (--) Targus USB Mouse: Found scroll wheel(s) [ 6.096] (--) Targus USB Mouse: Found relative axes [ 6.096] (--) Targus USB Mouse: Found x and y relative axes [ 6.096] (II) Targus USB Mouse: Configuring as mouse [ 6.096] (II) Targus USB Mouse: Adding scrollwheel support [ 6.096] (**) Targus USB Mouse: YAxisMapping: buttons 4 and 5 [ 6.096] (**) Targus USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 6.096] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input10/event10" [ 6.096] (II) XINPUT: Adding extended input device "Targus USB Mouse" (type: MOUSE, id 12) [ 6.096] (II) Targus USB Mouse: initialized for relative axes. [ 6.096] (**) Targus USB Mouse: (accel) keeping acceleration scheme 1 [ 6.096] (**) Targus USB Mouse: (accel) acceleration profile 0 [ 6.097] (**) Targus USB Mouse: (accel) acceleration factor: 2.000 [ 6.097] (**) Targus USB Mouse: (accel) acceleration threshold: 4 [ 6.097] (II) config/udev: Adding input device Targus USB Mouse (/dev/input/mouse1) [ 6.097] (II) No input driver/identifier specified (ignoring) [ 6.097] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event4) [ 6.097] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall" [ 6.097] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons' [ 6.098] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 6.098] (**) Asus Laptop extra buttons: always reports core events [ 6.098] (**) Asus Laptop extra buttons: Device: "/dev/input/event4" [ 6.098] (--) Asus Laptop extra buttons: Found keys [ 6.098] (II) Asus Laptop extra buttons: Configuring as keyboard [ 6.098] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input4/event4" [ 6.098] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 13) [ 6.098] (**) Option "xkb_rules" "evdev" [ 6.098] (**) Option "xkb_model" "evdev" [ 6.098] (**) Option "xkb_layout" "dvorak" [ 6.098] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 6.098] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 6.098] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 6.098] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 6.099] (**) AT Translated Set 2 keyboard: always reports core events [ 6.099] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 6.099] (--) AT Translated Set 2 keyboard: Found keys [ 6.099] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 6.099] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 6.099] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14) [ 6.099] (**) Option "xkb_rules" "evdev" [ 6.099] (**) Option "xkb_model" "evdev" [ 6.099] (**) Option "xkb_layout" "dvorak" [ 6.099] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9) [ 6.099] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall" [ 6.099] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall" [ 6.099] (II) LoadModule: "synaptics" [ 6.100] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 6.101] (II) Module synaptics: vendor="X.Org Foundation" [ 6.101] compiled for 1.11.0, module version = 1.5.0 [ 6.101] Module class: X.Org XInput Driver [ 6.101] ABI class: X.Org XInput driver, version 13.0 [ 6.101] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad' [ 6.101] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 6.101] (**) ETPS/2 Elantech Touchpad: always reports core events [ 6.101] (**) Option "Device" "/dev/input/event9" [ 6.333] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 8 - 1144 [ 6.333] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 8 - 760 [ 6.333] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255 [ 6.333] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 0 [ 6.333] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple [ 6.333] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe [ 6.333] (**) Option "TapButton1" "1" [ 6.333] (**) Option "TapButton2" "2" [ 6.333] (**) Option "TapButton3" "3" [ 6.410] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found [ 6.410] (**) ETPS/2 Elantech Touchpad: always reports core events [ 6.493] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input9/event9" [ 6.493] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 15) [ 6.493] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5 [ 6.493] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75 [ 6.493] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.147 [ 6.493] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1 [ 6.493] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1 [ 6.493] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000 [ 6.494] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4 [ 6.494] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found [ 6.494] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0) [ 6.494] (II) No input driver/identifier specified (ignoring) [ 6.494] (II) config/udev: Adding input device PC Speaker (/dev/input/event5) [ 6.494] (II) No input driver/identifier specified (ignoring) [ 26.575] (II) intel(0): EDID vendor "AUO", prod id 4140 [ 26.576] (II) intel(0): Printing DDC gathered Modelines: [ 26.576] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1494 768 771 777 803 -hsync -vsync (48.2 kHz) [ 27.154] (II) intel(0): Allocated new frame buffer 1920x1200 stride 7680, tiled