Hello,

i'm running a Macbook 3,1 with kernel 3,0 and if i suspend the macbook and resume afterwards i get a hdd (actually a SSD) freeze.

Here's the output:

Aug 11 23:28:36 localhost kernel: [ 115.612306] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
Aug 11 23:28:36 localhost kernel: [ 115.612313] ata3.00: BMDMA stat 0x6
Aug 11 23:28:36 localhost kernel: [ 115.612318] ata3.00: failed command: READ DMA
Aug 11 23:28:36 localhost kernel: [ 115.612327] ata3.00: cmd c8/00:00:ba:9b:56/00:00:00:00:00/e9 tag 0 dma 131072 in
Aug 11 23:28:36 localhost kernel: [ 115.612329] res 51/84:01:00:00:00/84:00:00:00:00/e0 Emask 0x30 (host bus error)
Aug 11 23:28:36 localhost kernel: [ 115.612334] ata3.00: status: { DRDY ERR }
Aug 11 23:28:36 localhost kernel: [ 115.612337] ata3.00: error: { ICRC ABRT }
Aug 11 23:28:37 localhost kernel: [ 115.956326] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
Aug 11 23:28:37 localhost kernel: [ 115.956336] ata3.00: BMDMA stat 0x6
Aug 11 23:28:37 localhost kernel: [ 115.956344] ata3.00: failed command: READ DMA
Aug 11 23:28:37 localhost kernel: [ 115.956357] ata3.00: cmd c8/00:d0:da:fb:30/00:00:00:00:00/e0 tag 0 dma 106496 in
Aug 11 23:28:37 localhost kernel: [ 115.956360] res 51/84:01:00:00:00/84:00:00:00:00/e0 Emask 0x30 (host bus error)
Aug 11 23:28:37 localhost kernel: [ 115.956367] ata3.00: status: { DRDY ERR }
Aug 11 23:28:37 localhost kernel: [ 115.956372] ata3.00: error: { ICRC ABRT }


I tried to boot with "libata.noacpi=1" and "libata.force=noncq", but had no sucess. I switched to the 2.6.32-lts kernel with the same result.

I'm running cpufrequtils, pm-utils and laptop-mode-tools.