Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.37-ARCH (tobias@T-POWA-LX) (gcc version 4.5.2 (GCC) ) #1 SMP PREEMPT Sat Jan 29 20:00:33 CET 2011 Command line: root=/dev/sda3 ro vga=792 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable) BIOS-e820: 000000007ffc0000 - 000000007ffd0000 (ACPI data) BIOS-e820: 000000007ffd0000 - 0000000080000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI 2.3 present. DMI: 'K8N'/K8N, BIOS 1011.005 02/16/2006 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) AGP bridge at 00:00:00 Aperture from AGP @ f0000000 old size 32 MB Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB Aperture from AGP @ f0000000 size 32 MB (APSIZE 0) last_pfn = 0x7ffc0 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 found SMP MP-table at [ffff8800000ff780] ff780 Scanning 0 areas for low memory corruption initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000007ffc0000 0000000000 - 007fe00000 page 2M 007fe00000 - 007ffc0000 page 4k kernel direct mapping tables up to 7ffc0000 @ 1fffc000-20000000 RAMDISK: 37e2b000 - 37ff0000 ACPI: RSDP 00000000000f9ed0 00021 (v02 ACPIAM) ACPI: XSDT 000000007ffc0100 0003C (v01 A M I OEMXSDT 02000616 MSFT 00000097) ACPI: FACP 000000007ffc0290 000F4 (v03 A M I OEMFACP 02000616 MSFT 00000097) ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20101013/tbfadt-526) ACPI Warning: Optional field Gpe1Block has zero address or length: 0x00000000000044A0/0x0 (20101013/tbfadt-557) ACPI: DSDT 000000007ffc0400 0441D (v01 A0128 A0128003 00000003 INTL 02002026) ACPI: FACS 000000007ffd0000 00040 ACPI: APIC 000000007ffc0390 00068 (v01 A M I OEMAPIC 02000616 MSFT 00000097) ACPI: OEMB 000000007ffd0040 00041 (v01 A M I OEMBIOS 02000616 MSFT 00000097) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0007ffc0 On node 0 totalpages: 524111 DMA zone: 56 pages used for memmap DMA zone: 6 pages reserved DMA zone: 3921 pages, LIFO batch:0 DMA32 zone: 7112 pages used for memmap DMA32 zone: 513016 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 1 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s81664 r8192 d20736 u2097152 pcpu-alloc: s81664 r8192 d20736 u2097152 alloc=1*2097152 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516937 Kernel command line: root=/dev/sda3 ro vga=792 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... AGP bridge at 00:00:00 Aperture from AGP @ f0000000 old size 32 MB Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB Aperture from AGP @ f0000000 size 32 MB (APSIZE 0) Node 0: aperture @ f0000000 size 128 MB Memory: 2054500k/2096896k available (3751k kernel code, 452k absent, 41944k reserved, 2002k data, 512k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Preemptable hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:2304 Extended CMOS year: 2000 spurious 8259A interrupt: IRQ7. Console: colour dummy device 80x25 console [tty0] enabled allocated 20971520 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Fast TSC calibration using PIT Detected 2009.350 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.14 BogoMIPS (lpj=6697833) pid_max: default: 32768 minimum: 301 Security Framework initialized AppArmor: AppArmor disabled by boot time parameter Mount-cache hash table entries: 256 Initializing cgroup subsys ns ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio tseg: 0000000000 mce: CPU supports 5 MCE banks Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed ACPI: Core revision 20101013 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: AMD Sempron(tm) Processor 3400+ stepping 02 NMI watchdog enabled, takes one hw-pmu counter. Brought up 1 CPUs Total of 1 processors activated (4020.14 BogoMIPS). devtmpfs: initialized NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 0000000080000000 aka 2048M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [80000000, fe0bffff] bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0x000a0000-0x000bffff] bus: 00 index 2 [mem 0x80000000-0xfcffffffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: Actual Package length (234) is larger than NumElements field (3), truncated ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723) ACPI: Power Resource [ISAV] (on) ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xff7bffff] (ignored) pci 0000:00:00.0: [10de:00e1] type 0 class 0x000600 pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] pci 0000:00:01.0: [10de:00e0] type 0 class 0x000601 pci 0000:00:01.1: [10de:00e4] type 0 class 0x000c05 pci 0000:00:01.1: reg 10: [io 0x5080-0x509f] pci 0000:00:01.1: reg 20: [io 0x5000-0x503f] pci 0000:00:01.1: reg 24: [io 0x5040-0x507f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:02.0: [10de:00e7] type 0 class 0x000c03 pci 0000:00:02.0: reg 10: [mem 0xfebfd000-0xfebfdfff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: [10de:00e7] type 0 class 0x000c03 pci 0000:00:02.1: reg 10: [mem 0xfebfe000-0xfebfefff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:02.2: [10de:00e8] type 0 class 0x000c03 pci 0000:00:02.2: reg 10: [mem 0xfebffc00-0xfebffcff] pci 0000:00:02.2: supports D1 D2 pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.2: PME# disabled pci 0000:00:08.0: [10de:00e5] type 0 class 0x000101 pci 0000:00:08.0: reg 20: [io 0xffa0-0xffaf] pci 0000:00:0a.0: [10de:00e3] type 0 class 0x000101 pci 0000:00:0a.0: reg 10: [io 0x09f0-0x09f7] pci 0000:00:0a.0: reg 14: [io 0x0bf0-0x0bf3] pci 0000:00:0a.0: reg 18: [io 0x0970-0x0977] pci 0000:00:0a.0: reg 1c: [io 0x0b70-0x0b73] pci 0000:00:0a.0: reg 20: [io 0xd000-0xd00f] pci 0000:00:0a.0: reg 24: [io 0xdc00-0xdc7f] pci 0000:00:0b.0: [10de:00e2] type 1 class 0x000604 pci 0000:00:0e.0: [10de:00ed] type 1 class 0x000604 pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 PCI: peer root bus 00 res updated from pci conf pci 0000:01:00.0: [10de:02e0] type 0 class 0x000300 pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff pref] pci 0000:01:00.0: reg 18: [mem 0xfc000000-0xfcffffff] pci 0000:01:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref] pci 0000:00:0b.0: PCI bridge to [bus 01-01] pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:0b.0: bridge window [mem 0xfa900000-0xfe9fffff] pci 0000:00:0b.0: bridge window [mem 0xca800000-0xea7fffff pref] pci 0000:02:07.0: [9004:8178] type 0 class 0x000100 pci 0000:02:07.0: reg 10: [io 0xc800-0xc8ff] pci 0000:02:07.0: reg 14: [mem 0xfeaff000-0xfeafffff] pci 0000:02:07.0: reg 30: [mem 0xfeae0000-0xfeaeffff pref] pci 0000:02:08.0: [1033:0035] type 0 class 0x000c03 pci 0000:02:08.0: reg 10: [mem 0xfeafc000-0xfeafcfff] pci 0000:02:08.0: supports D1 D2 pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot pci 0000:02:08.0: PME# disabled pci 0000:02:08.1: [1033:0035] type 0 class 0x000c03 pci 0000:02:08.1: reg 10: [mem 0xfeafd000-0xfeafdfff] pci 0000:02:08.1: supports D1 D2 pci 0000:02:08.1: PME# supported from D0 D1 D2 D3hot pci 0000:02:08.1: PME# disabled pci 0000:02:08.2: [1033:00e0] type 0 class 0x000c03 pci 0000:02:08.2: reg 10: [mem 0xfeafec00-0xfeafecff] pci 0000:02:08.2: supports D1 D2 pci 0000:02:08.2: PME# supported from D0 D1 D2 D3hot pci 0000:02:08.2: PME# disabled pci 0000:02:09.0: [10ec:8139] type 0 class 0x000200 pci 0000:02:09.0: reg 10: [io 0xc400-0xc4ff] pci 0000:02:09.0: reg 14: [mem 0xfeafe800-0xfeafe8ff] pci 0000:02:09.0: supports D1 D2 pci 0000:02:09.0: PME# supported from D1 D2 D3hot D3cold pci 0000:02:09.0: PME# disabled pci 0000:02:0a.0: [1102:0002] type 0 class 0x000401 pci 0000:02:0a.0: reg 10: [io 0xc000-0xc01f] pci 0000:02:0a.0: supports D1 D2 pci 0000:02:0a.1: [1102:7002] type 0 class 0x000980 pci 0000:02:0a.1: reg 10: [io 0xcc00-0xcc07] pci 0000:02:0a.1: supports D1 D2 pci 0000:00:0e.0: PCI bridge to [bus 02-02] pci 0000:00:0e.0: bridge window [io 0xc000-0xcfff] pci 0000:00:0e.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:0e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *9 ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *11 ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11 ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *5 ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *9 ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *10 ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *3 ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0 ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14 HEST: Table is not found! vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:00.0: address space collision: [mem 0xf0000000-0xf7ffffff pref] conflicts with GART [mem 0xf0000000-0xf7ffffff] reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000007ffc0000 - 000000007fffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x00000000 window] pnp 00:00: [mem 0x80000000-0xff7bffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [dma 4] pnp 00:01: [io 0x0000-0x000f] pnp 00:01: [io 0x0081-0x0083] pnp 00:01: [io 0x0087] pnp 00:01: [io 0x0089-0x008b] pnp 00:01: [io 0x008f] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: [io 0x0070-0x0071] pnp 00:02: [irq 8] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:03: [io 0x0061] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:04: [io 0x00f0-0x00ff] pnp 00:04: [irq 13] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: [irq 6] pnp 00:05: [dma 2] pnp 00:05: [io 0x03f0-0x03f5] pnp 00:05: [io 0x03f7] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:06: [io 0x0378-0x037f] pnp 00:06: [io 0x0778-0x077b] pnp 00:06: [irq 7] pnp 00:06: [dma 3] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active) pnp 00:07: [io 0x0010-0x001f] pnp 00:07: [io 0x0022-0x003f] pnp 00:07: [io 0x0044-0x005f] pnp 00:07: [io 0x0062-0x0063] pnp 00:07: [io 0x0065-0x006f] pnp 00:07: [io 0x0072-0x007f] pnp 00:07: [io 0x0080] pnp 00:07: [io 0x0084-0x0086] pnp 00:07: [io 0x0088] pnp 00:07: [io 0x008c-0x008e] pnp 00:07: [io 0x0090-0x009f] pnp 00:07: [io 0x00a2-0x00bf] pnp 00:07: [io 0x00e0-0x00ef] pnp 00:07: [io 0x0190-0x0193] pnp 00:07: [io 0x04d0-0x04d1] pnp 00:07: [io 0x4000-0x40ff window] pnp 00:07: [io 0x4400-0x44ff window] pnp 00:07: [io 0x4800-0x48ff window] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:08: [mem 0xfec00000-0xfec00fff] pnp 00:08: [mem 0xfee00000-0xfeefffff] pnp 00:08: [mem 0xff780000-0xff7bffff] pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [io 0x0060] pnp 00:09: [io 0x0064] pnp 00:09: [irq 1] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:0a: [irq 12] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled] pnp 00:0b: [io 0x0480-0x0487] pnp 00:0b: [io 0x0d00-0x0d07] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [irq 4] pnp 00:0c: [dma 0 disabled] pnp 00:0c: [io 0x03f8-0x03ff] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0d: [mem 0x00000000-0x0009ffff] pnp 00:0d: [mem 0x000c0000-0x000dffff] pnp 00:0d: [mem 0x000e0000-0x000fffff] pnp 00:0d: [mem 0x00100000-0x7fffffff] pnp 00:0d: [mem 0xff7c0000-0xffffffff] pnp 00:0d: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref] pnp 00:0d: disabling [mem 0x000c0000-0x000dffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref] pnp 00:0d: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref] pnp 00:0d: disabling [mem 0x00100000-0x7fffffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x07ffffff pref] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:07: [io 0x0190-0x0193] has been reserved system 00:07: [io 0x04d0-0x04d1] has been reserved system 00:07: [io 0x4000-0x40ff window] has been reserved system 00:07: [io 0x4400-0x44ff window] has been reserved system 00:07: [io 0x4800-0x48ff window] has been reserved system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:08: [mem 0xff780000-0xff7bffff] has been reserved system 00:0b: [io 0x0480-0x0487] has been reserved system 00:0b: [io 0x0d00-0x0d07] has been reserved system 00:0d: [mem 0xff7c0000-0xffffffff] has been reserved pci 0000:00:0b.0: PCI bridge to [bus 01-01] pci 0000:00:0b.0: bridge window [io disabled] pci 0000:00:0b.0: bridge window [mem 0xfa900000-0xfe9fffff] pci 0000:00:0b.0: bridge window [mem 0xca800000-0xea7fffff pref] pci 0000:00:0e.0: PCI bridge to [bus 02-02] pci 0000:00:0e.0: bridge window [io 0xc000-0xcfff] pci 0000:00:0e.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:0e.0: bridge window [mem pref disabled] pci 0000:00:0e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0xffff] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffffff] pci_bus 0000:01: resource 1 [mem 0xfa900000-0xfe9fffff] pci_bus 0000:01: resource 2 [mem 0xca800000-0xea7fffff pref] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 1024 (order: 3, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 32 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 1812k freed agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000 Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1296949147.199:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 4016 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000080000, using 6144k, total 262144k vesafb: mode is 1024x768x32, linelength=4096, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ERST: Table is not found! Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Registering the dns_resolver key type PM: Hibernation image not present or could not be loaded. registered taskstats version 1 rtc_cmos 00:02: setting system clock to 2011-02-05 23:39:08 UTC (1296949148) Initalizing network drop monitor service input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 Freeing unused kernel memory: 512k freed udev[32]: starting version 165 SCSI subsystem initialized libata version 3.00 loaded. pata_amd 0000:00:08.0: version 0.4.1 pata_amd 0000:00:08.0: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19 pata_amd 0000:00:08.0: power state changed by ACPI to D0 aic7xxx 0000:02:07.0: PCI INT A -> Link[LNKB] -> GSI 19 (level, low) -> IRQ 19 pata_amd 0000:00:08.0: setting latency timer to 64 scsi0 : pata_amd scsi2 : pata_amd ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ACPI: PCI Interrupt Link [LTID] BIOS reported IRQ 0, using IRQ 22 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22 pata_acpi 0000:00:0a.0: PCI INT A -> Link[LTID] -> GSI 22 (level, low) -> IRQ 22 pata_acpi 0000:00:0a.0: setting latency timer to 64 pata_acpi 0000:00:0a.0: PCI INT A disabled ata1.00: ATAPI: PIONEER DVD-RW DVR-116D, 1.06, max UDMA/66 ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13) ata1.00: configured for UDMA/66 scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-116D 1.06 PQ: 0 ANSI: 5 sata_nv 0000:00:0a.0: version 3.5 sata_nv 0000:00:0a.0: PCI INT A -> Link[LTID] -> GSI 22 (level, low) -> IRQ 22 sata_nv 0000:00:0a.0: setting latency timer to 64 scsi3 : sata_nv scsi4 : sata_nv ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd000 irq 22 ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd008 irq 22 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATA-7: WDC WD800JD-22MSA1, 10.01E01, max UDMA/133 ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA WDC WD800JD-22MS 10.0 PQ: 0 ANSI: 5 ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATA-8: WDC WD15EVDS-63V9B0, 01.00A01, max UDMA/133 ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/133 scsi 4:0:0:0: Direct-Access ATA WDC WD15EVDS-63V 01.0 PQ: 0 ANSI: 5 sd 3:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) sd 4:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) sd 4:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sda] Write Protect is off sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sda: sda1 sda3 sda4 sd 4:0:0:0: [sdb] Attached SCSI disk sd 3:0:0:0: [sda] Attached SCSI disk scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs scsi 1:0:0:0: Direct-Access IBM DNES-318350 SAH0 PQ: 0 ANSI: 3 scsi1:A:0:0: Tagged Queuing enabled. Depth 32 scsi target1:0:0: Beginning Domain Validation scsi target1:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) scsi target1:0:0: Domain Validation skipping write tests scsi target1:0:0: Ending Domain Validation sd 1:0:0:0: [sdc] 35843670 512-byte logical blocks: (18.3 GB/17.0 GiB) scsi 1:0:2:0: CD-ROM PLEXTOR CD-R PX-R412C 1.07 PQ: 0 ANSI: 2 scsi target1:0:2: Beginning Domain Validation scsi target1:0:2: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 8) scsi target1:0:2: Domain Validation skipping write tests scsi target1:0:2: Ending Domain Validation sd 1:0:0:0: [sdc] Write Protect is off sd 1:0:0:0: [sdc] Mode Sense: c3 00 00 08 sr1: scsi3-mmc drive: 12x/12x writer cd/rw xa/form2 cdda caddy sr 1:0:2:0: Attached scsi CD-ROM sr1 scsi 1:0:3:0: CD-ROM PLEXTOR CD-ROM PX-32TS 1.03 PQ: 0 ANSI: 2 scsi target1:0:3: Beginning Domain Validation sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi target1:0:3: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) scsi target1:0:3: Domain Validation skipping write tests scsi target1:0:3: Ending Domain Validation sr2: scsi-1 drive sr 1:0:3:0: Attached scsi CD-ROM sr2 sdc: sdc1 sdc2 sdc3 sdc4 sd 1:0:0:0: [sdc] Attached SCSI disk (scsi1:A:3:0): No or incomplete CDB sent to device. scsi1: Issued Channel A Bus Reset. 1 SCBs aborted scsi target1:0:2: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 8) (scsi1:A:2:0): No or incomplete CDB sent to device. scsi1: Issued Channel A Bus Reset. 2 SCBs aborted scsi target1:0:3: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) udev[485]: starting version 165 lp: driver loaded but no devices found IT8712 SuperIO detected. parport_pc 00:06: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] lp0: using parport0 (interrupt-driven). input: PC Speaker as /devices/platform/pcspkr/input/input1 MCE: In-kernel MCE decoding enabled. sr 0:0:0:0: Attached scsi generic sg0 type 5 sd 3:0:0:0: Attached scsi generic sg1 type 0 sd 4:0:0:0: Attached scsi generic sg2 type 0 sd 1:0:0:0: Attached scsi generic sg3 type 0 sr 1:0:2:0: Attached scsi generic sg4 type 5 sr 1:0:3:0: Attached scsi generic sg5 type 5 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: resource nForce2_smbus [io 0x5000-0x503f] conflicts with ACPI region SMRG [io 0x5000-0x5004 pref disabled] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver i2c i2c-0: nForce2 SMBus adapter at 0x5040 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 EDAC MC: Ver: 2.1.0 Jan 29 2011 ppdev: user-space parallel port driver input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] EDAC amd64_edac: Ver: 3.3.0 Jan 29 2011 EDAC amd64: ECC is enabled by BIOS. EDAC MC: Rev E or earlier detected EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2 EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) (scsi1:A:2:0): No or incomplete CDB sent to device. scsi1: Issued Channel A Bus Reset. 1 SCBs aborted Floppy drive(s): fd0 is 1.44M usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub FDC 0 is a post-1991 82077 ACPI: acpi_idle registered with cpuidle usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21 ehci_hcd 0000:00:02.2: PCI INT C -> Link[LUS2] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:02.2: setting latency timer to 64 ehci_hcd 0000:00:02.2: EHCI Host Controller ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.2: debug port 1 ehci_hcd 0000:00:02.2: cache line size of 32 is not supported ehci_hcd 0000:00:02.2: irq 21, io mem 0xfebffc00 ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18 ehci_hcd 0000:02:08.2: PCI INT C -> Link[LNKA] -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:02:08.2: EHCI Host Controller ehci_hcd 0000:02:08.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:02:08.2: irq 18, io mem 0xfeafec00 ehci_hcd 0000:02:08.2: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 5 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20 ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.0: irq 20, io mem 0xfebfd000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 22 ohci_hcd 0000:00:02.1: PCI INT B -> Link[LUS1] -> GSI 22 (level, low) -> IRQ 22 ohci_hcd 0000:00:02.1: setting latency timer to 64 ohci_hcd 0000:00:02.1: OHCI Host Controller ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:02.1: irq 22, io mem 0xfebfe000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 4 ports detected ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 17 ohci_hcd 0000:02:08.0: PCI INT A -> Link[LNKC] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:02:08.0: OHCI Host Controller ohci_hcd 0000:02:08.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:02:08.0: irq 17, io mem 0xfeafc000 (scsi1:A:3:0): No or incomplete CDB sent to device. scsi1: Issued Channel A Bus Reset. 2 SCBs aborted 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) usb 2-3: new high speed USB device using ehci_hcd and address 2 hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected 8139cp 0000:02:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 16 ohci_hcd 0000:02:08.1: PCI INT B -> Link[LNKD] -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:02:08.1: OHCI Host Controller ohci_hcd 0000:02:08.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:02:08.1: irq 16, io mem 0xfeafd000 gameport gameport0: EMU10K1 is pci0000:02:0a.1/gameport0, io 0xcc00, speed 1140kHz 8139too: 8139too Fast Ethernet driver 0.9.28 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected 8139too 0000:02:09.0: PCI INT A -> Link[LNKD] -> GSI 16 (level, low) -> IRQ 16 8139too 0000:02:09.0: eth0: RealTek RTL8139 at 0xffffc90000b26800, 00:40:f4:a8:4c:65, IRQ 16 usb 2-5: new high speed USB device using ehci_hcd and address 3 usb 3-1: new low speed USB device using ohci_hcd and address 2 EMU10K1_Audigy 0000:02:0a.0: PCI INT A -> Link[LNKA] -> GSI 18 (level, low) -> IRQ 18 usb 2-3: selecting invalid altsetting 1 usbcore: registered new interface driver uas nvidia: module license 'NVIDIA' taints kernel. Disabling lock debugging due to kernel taint rt2870sta: module is from the staging directory, the quality is unknown, you have been warned. rtusb init ---> === pAd = ffffc90001a7f000, size = 504952 === <-- RTMPAllocAdapterBlock, Status=0 ------------[ cut here ]------------ WARNING: at include/linux/netdevice.h:1557 RtmpPhyNetDevInit+0xa4/0xc0 [rt2870sta]() Hardware name: K8N Modules linked in: rt2870sta(C+) snd_seq_midi_event snd_seq hid crc_ccitt uas snd_emu10k1 snd_rawmidi snd_ac97_codec ac97_bus snd_pcm snd_seq_device snd_timer snd_page_alloc snd_util_mem snd_hwdep snd soundcore 8139too emu10k1_gp gameport 8139cp mii ohci_hcd ehci_hcd processor floppy amd64_edac_mod button ppdev usbcore shpchp i2c_nforce2 sg edac_core edac_mce_amd pci_hotplug i2c_core pcspkr evdev serio_raw k8temp parport_pc psmouse lp parport ext4 mbcache jbd2 crc16 sd_mod sr_mod cdrom sata_nv pata_acpi aic7xxx pata_amd libata scsi_transport_spi scsi_mod Pid: 1584, comm: modprobe Tainted: P C 2.6.37-ARCH #1 Call Trace: [] warn_slowpath_common+0x7a/0xb0 [] warn_slowpath_null+0x15/0x20 [] RtmpPhyNetDevInit+0xa4/0xc0 [rt2870sta] [] rtusb_probe+0x336/0x412 [rt2870sta] [] usb_probe_interface+0x109/0x200 [usbcore] [] driver_probe_device+0x96/0x1c0 [] __driver_attach+0x9b/0xa0 [] ? __driver_attach+0x0/0xa0 [] bus_for_each_dev+0x5e/0x90 [] driver_attach+0x19/0x20 [] bus_add_driver+0x158/0x300 [] driver_register+0x71/0x140 [] ? printk+0x3c/0x42 [] usb_register_driver+0xb8/0x170 [usbcore] [] ? init_module+0x0/0x2e [rt2870sta] [] init_module+0x2c/0x2e [rt2870sta] [] do_one_initcall+0x3f/0x180 [] sys_init_module+0xbb/0x200 [] system_call_fastpath+0x16/0x1b ---[ end trace 05d6d4c6ba2ce80b ]--- netif_stop_queue() cannot be called before register_netdev() usbcore: registered new interface driver rt2870 input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/input/input4 generic-usb 0003:046D:C043.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver Initializing USB Mass Storage driver... scsi5 : usb-storage 2-3:1.0 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. scsi 5:0:0:0: Direct-Access CHIPSBNK USB 2.0 5.00 PQ: 0 ANSI: 2 sd 5:0:0:0: Attached scsi generic sg6 type 0 sd 5:0:0:0: [sdd] 1035776 512-byte logical blocks: (530 MB/505 MiB) sd 5:0:0:0: [sdd] Write Protect is off sd 5:0:0:0: [sdd] Mode Sense: 0b 00 00 08 sd 5:0:0:0: [sdd] Assuming drive cache: write through sd 5:0:0:0: [sdd] Assuming drive cache: write through sdd: sdd1 sd 5:0:0:0: [sdd] Assuming drive cache: write through sd 5:0:0:0: [sdd] Attached SCSI removable disk ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 19 nvidia 0000:01:00.0: PCI INT A -> Link[LNKE] -> GSI 19 (level, low) -> IRQ 19 vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.36 Tue Jan 18 16:56:11 PST 2011 EXT4-fs (sda3): re-mounted. Opts: (null) EXT4-fs (sda3): re-mounted. Opts: (null) EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: (null) Adding 2097148k swap on /dev/sdc1. Priority:-1 extents:1 across:2097148k eth0: link down <-- RTMPAllocTxRxRingMemory, Status=0 -->RTUSBVenderReset <--RTUSBVenderReset 1. Phy Mode = 0 2. Phy Mode = 0 RTMPSetPhyMode: channel is out of range, use first channel=1 3. Phy Mode = 0 MCS Set = 00 00 00 00 00 <==== rt28xx_init, Status=0 0x1300 = 000a4200 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready ===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 433 ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) agpgart-amd64 0000:00:00.0: AGP 3.0 bridge agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode nvidia 0000:01:00.0: putting AGP V3 device into 8x mode wlan0: no IPv6 routers present fuse init (API version 7.15) usb 2-3: USB disconnect, address 2 usb 2-3: new high speed USB device using ehci_hcd and address 4 usb 2-3: selecting invalid altsetting 1 scsi6 : usb-storage 2-3:1.0 scsi 6:0:0:0: Direct-Access CHIPSBNK USB 2.0 5.00 PQ: 0 ANSI: 2 sd 6:0:0:0: [sdd] 1035776 512-byte logical blocks: (530 MB/505 MiB) sd 6:0:0:0: Attached scsi generic sg6 type 0 sd 6:0:0:0: [sdd] Write Protect is off sd 6:0:0:0: [sdd] Mode Sense: 0b 00 00 08 sd 6:0:0:0: [sdd] Assuming drive cache: write through sd 6:0:0:0: [sdd] Assuming drive cache: write through sdd: sdd1 sd 6:0:0:0: [sdd] Assuming drive cache: write through sd 6:0:0:0: [sdd] Attached SCSI removable disk