Please read this before reporting a bug:
https://wiki.archlinux.org/title/Bug_reporting_guidelines
Do NOT report bugs when a package is just outdated, or it is in the AUR. Use the 'flag out of date' link on the package page, or the Mailing List.
REPEAT: Do NOT report bugs for outdated packages!
https://wiki.archlinux.org/title/Bug_reporting_guidelines
Do NOT report bugs when a package is just outdated, or it is in the AUR. Use the 'flag out of date' link on the package page, or the Mailing List.
REPEAT: Do NOT report bugs for outdated packages!
FS#22220 - [kernel26] Unable to handle kernel paging
Attached to Project:
Arch Linux
Opened by Roberto Spadim (rspadim) - Sunday, 26 December 2010, 16:54 GMT
Last edited by Tobias Powalowski (tpowa) - Tuesday, 14 February 2012, 14:38 GMT
Opened by Roberto Spadim (rspadim) - Sunday, 26 December 2010, 16:54 GMT
Last edited by Tobias Powalowski (tpowa) - Tuesday, 14 February 2012, 14:38 GMT
|
DetailsDescription:
using the linux... and i get this "bug" and filesystem became unusable (just /home, since all others folders are ext4) dmesg: BUG: unable to handle kernel paging request at ffffffff83147130 IP: [<ffffffff83147130>] 0xffffffff83147130 PGD 1003067 PUD 1007063 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/module/x_tables/initstate CPU 0 Modules linked in: xt_tcpudp xt_limit ipt_LOG xt_state nf_nat_ftp nf_conntrack_ftp nf_nat_irc nf_conntrack_irc ipt_MASQUERADE iptable_mangle iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables x_tables bonding ipv6 pl2303 usbserial xfs exportfs uhci_hcd r8169 pcspkr ehci_hcd i2c_i801 thermal psmouse mii wmi e1000e evdev iTCO_wdt usbcore i2c_core sg button iTCO_vendor_support processor serio_raw ext4 mbcache jbd2 crc16 raid1 md_mod sr_mod cdrom sd_mod ahci pata_marvell pata_acpi libata scsi_mod Pid: 1617, comm: xfsdatad/0 Not tainted 2.6.32-lts #1 RIP: 0010:[<ffffffff83147130>] [<ffffffff83147130>] 0xffffffff83147130 RSP: 0018:ffff88022444bde8 EFLAGS: 00010246 RAX: ffff8800b6285700 RBX: ffff8801edf1ef60 RCX: 0000000043d40000 RDX: ffffffff00000001 RSI: 0000000000000001 RDI: ffff8800b6285700 RBP: ffff88022444be10 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000008 R12: ffff88021a1b9f50 R13: ffff88021a1b9dc0 R14: ffff8800b62855b0 R15: ffff8802265a0700 FS: 0000000000000000(0000) GS:ffff880008c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: ffffffff83147130 CR3: 000000021e6f8000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process xfsdatad/0 (pid: 1617, threadinfo ffff88022444a000, task ffff8802265a0700) Stack: ffffffffa023f0ef ffff8801edf1ef60 ffffffffa023f2d0 ffffe8ffffc00008 <0> ffff88022444bfd8 ffff88022444be30 ffffffffa023f2f2 ffffffffa023f2d0 <0> ffffe8ffffc00000 ffff88022444bee0 ffffffff81071bf8 ffff88022444bfd8 Call Trace: [<ffffffffa023f0ef>] ? xfs_destroy_ioend+0x3f/0x90 [xfs] [<ffffffffa023f2d0>] ? xfs_end_bio_delalloc+0x0/0x50 [xfs] [<ffffffffa023f2f2>] xfs_end_bio_delalloc+0x22/0x50 [xfs] [<ffffffffa023f2d0>] ? xfs_end_bio_delalloc+0x0/0x50 [xfs] [<ffffffff81071bf8>] worker_thread+0x158/0x290 [<ffffffff810763c0>] ? autoremove_wake_function+0x0/0x40 [<ffffffff81071aa0>] ? worker_thread+0x0/0x290 [<ffffffff81075f6e>] kthread+0x8e/0xa0 [<ffffffff81012f2a>] child_rip+0xa/0x20 [<ffffffff81075ee0>] ? kthread+0x0/0xa0 [<ffffffff81012f20>] ? child_rip+0x0/0x20 Code: Bad RIP value. RIP [<ffffffff83147130>] 0xffffffff83147130 RSP <ffff88022444bde8> CR2: ffffffff83147130 ---[ end trace 9c2bf378ad8f813e ]--- and after a time... another bug... 2010 Dec 26 21:05:27 localhost Oops: 0002 [#2] SMP 2010 Dec 26 21:05:27 localhost last sysfs file: /sys/module/x_tables/initstate 2010 Dec 26 21:05:27 localhost Stack: 2010 Dec 26 21:05:27 localhost Call Trace: 2010 Dec 26 21:05:27 localhost Code: 4c 89 ef e8 ff fd ff ff 49 89 c4 eb 91 4c 89 ef e8 22 b4 08 e1 66 90 eb c7 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 <f0> 0f ba 2f 17 19 c0 85 c0 75 1c 48 8b 17 31 c0 f7 c2 00 00 01 2010 Dec 26 21:05:27 localhost CR2: 0000000000010200 BUG: unable to handle kernel paging request at 0000000000010200 IP: [<ffffffffa00bbf44>] jbd2_journal_grab_journal_head+0x4/0x40 [jbd2] PGD 209b10067 PUD 21e06d067 PMD 0 Oops: 0002 [#2] SMP last sysfs file: /sys/module/x_tables/initstate CPU 4 Modules linked in: xt_tcpudp xt_limit ipt_LOG xt_state nf_nat_ftp nf_conntrack_ftp nf_nat_irc nf_conntrack_irc ipt_MASQUERADE iptable_mangle iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables x_tables bonding ipv6 pl2303 usbserial xfs exportfs uhci_hcd r8169 pcspkr ehci_hcd i2c_i801 thermal psmouse mii wmi e1000e evdev iTCO_wdt usbcore i2c_core sg button iTCO_vendor_support processor serio_raw ext4 mbcache jbd2 crc16 raid1 md_mod sr_mod cdrom sd_mod ahci pata_marvell pata_acpi libata scsi_mod Pid: 63, comm: kswapd0 Tainted: G D 2.6.32-lts #1 RIP: 0010:[<ffffffffa00bbf44>] [<ffffffffa00bbf44>] jbd2_journal_grab_journal_head+0x4/0x40 [jbd2] RSP: 0018:ffff880226b858f0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000010200 RCX: 8000000000000809 RDX: 0003e80000800000 RSI: ffffea0004692fc8 RDI: 0000000000010200 RBP: ffff880226b858f0 R08: ffff880224024990 R09: dead000000100100 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880125ad5770 R14: ffffea0004692fc8 R15: ffff880227b3fbbc FS: 0000000000000000(0000) GS:ffff880008c80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000010200 CR3: 000000021e6f8000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kswapd0 (pid: 63, threadinfo ffff880226b84000, task ffff880227b78000) Stack: ffff880226b85940 ffffffffa00b1e48 ffff88022b671200 0000000000000000 <0> ffff880226b85940 ffffea0004692fc8 ffff880227b3f800 ffff880226b85dc0 <0> ffff880226b85c10 0000000000000001 ffff880226b85970 ffffffffa00db620 Call Trace: [<ffffffffa00b1e48>] jbd2_journal_try_to_free_buffers+0x48/0x150 [jbd2] [<ffffffffa00db620>] ext4_releasepage+0x50/0x90 [ext4] [<ffffffff810d89ab>] try_to_release_page+0x2b/0x50 [<ffffffff810e61d3>] shrink_page_list+0x4f3/0x5f0 [<ffffffff810e504b>] ? isolate_pages_global+0xeb/0x270 [<ffffffff810e6585>] shrink_inactive_list+0x2b5/0x740 [<ffffffff8104b9f2>] ? enqueue_entity+0xf2/0x170 [<ffffffff8104be11>] ? enqueue_task_fair+0x71/0x80 [<ffffffff810e6a99>] shrink_list+0x89/0xf0 [<ffffffff810e6daa>] shrink_zone+0x2aa/0x3f0 [<ffffffff810e7455>] balance_pgdat+0x565/0x5b0 [<ffffffff810e4f60>] ? isolate_pages_global+0x0/0x270 [<ffffffff810e7599>] kswapd+0xf9/0x140 [<ffffffff810763c0>] ? autoremove_wake_function+0x0/0x40 [<ffffffff810e74a0>] ? kswapd+0x0/0x140 [<ffffffff81075f6e>] kthread+0x8e/0xa0 [<ffffffff81012f2a>] child_rip+0xa/0x20 [<ffffffff81075ee0>] ? kthread+0x0/0xa0 [<ffffffff81012f20>] ? child_rip+0x0/0x20 Code: 4c 89 ef e8 ff fd ff ff 49 89 c4 eb 91 4c 89 ef e8 22 b4 08 e1 66 90 eb c7 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 <f0> 0f ba 2f 17 19 c0 85 c0 75 1c 48 8b 17 31 c0 f7 c2 00 00 01 RIP [<ffffffffa00bbf44>] jbd2_journal_grab_journal_head+0x4/0x40 [jbd2] RSP <ffff880226b858f0> CR2: 0000000000010200 ---[ end trace 9c2bf378ad8f813f ]--- Additional info: * package version(s) * config and/or log files etc. last archlinux kernel26-lts [root@agra home]# cat /proc/version Linux version 2.6.32-lts (nobody@workstation64) (gcc version 4.5.1 20101125 (prerelease) (GCC) ) #1 SMP Fri Dec 10 14:25:37 UTC 2010 [root@agra home]# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 26 model name : Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping : 5 cpu MHz : 2837.099 cache size : 8192 KB physical id : 0 siblings : 8 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid bogomips : 5674.19 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 26 model name : Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping : 5 cpu MHz : 2837.099 cache size : 8192 KB physical id : 0 siblings : 8 core id : 1 cpu cores : 4 apicid : 2 initial apicid : 2 fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid bogomips : 5675.27 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 2 vendor_id : GenuineIntel cpu family : 6 model : 26 model name : Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping : 5 cpu MHz : 2837.099 cache size : 8192 KB physical id : 0 siblings : 8 core id : 2 cpu cores : 4 apicid : 4 initial apicid : 4 fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid bogomips : 5675.28 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 26 model name : Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping : 5 cpu MHz : 2837.099 cache size : 8192 KB physical id : 0 siblings : 8 core id : 3 cpu cores : 4 apicid : 6 initial apicid : 6 fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid bogomips : 5675.28 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 4 vendor_id : GenuineIntel cpu family : 6 model : 26 model name : Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping : 5 cpu MHz : 2837.099 cache size : 8192 KB physical id : 0 siblings : 8 core id : 0 cpu cores : 4 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid bogomips : 5675.27 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 5 vendor_id : GenuineIntel cpu family : 6 model : 26 model name : Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping : 5 cpu MHz : 2837.099 cache size : 8192 KB physical id : 0 siblings : 8 core id : 1 cpu cores : 4 apicid : 3 initial apicid : 3 fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid bogomips : 5675.27 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 6 vendor_id : GenuineIntel cpu family : 6 model : 26 model name : Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping : 5 cpu MHz : 2837.099 cache size : 8192 KB physical id : 0 siblings : 8 core id : 2 cpu cores : 4 apicid : 5 initial apicid : 5 fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid bogomips : 5675.28 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 7 vendor_id : GenuineIntel cpu family : 6 model : 26 model name : Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping : 5 cpu MHz : 2837.099 cache size : 8192 KB physical id : 0 siblings : 8 core id : 3 cpu cores : 4 apicid : 7 initial apicid : 7 fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid bogomips : 5675.28 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: [root@agra home]# cat /proc/meminfo MemTotal: 8172992 kB MemFree: 7289252 kB Buffers: 74004 kB Cached: 214104 kB SwapCached: 0 kB Active: 448636 kB Inactive: 144660 kB Active(anon): 305272 kB Inactive(anon): 148 kB Active(file): 143364 kB Inactive(file): 144512 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 65577296 kB SwapFree: 65577296 kB Dirty: 8252 kB Writeback: 4 kB AnonPages: 305276 kB Mapped: 9668 kB Shmem: 172 kB Slab: 65068 kB SReclaimable: 52264 kB SUnreclaim: 12804 kB KernelStack: 1496 kB PageTables: 2652 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 69663792 kB Committed_AS: 1897036 kB VmallocTotal: 34359738367 kB VmallocUsed: 101920 kB VmallocChunk: 34359615248 kB HardwareCorrupted: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 4096 kB DirectMap2M: 8376320 kB [root@agra home]# ifconfig bond0 Link encap:Ethernet HWaddr 00:14:D1:1C:6F:2B inet addr:172.16.125.14 Bcast:172.16.255.255 Mask:255.255.0.0 inet6 addr: fe80::214:d1ff:fe1c:6f2b/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:198206 errors:0 dropped:0 overruns:0 frame:0 TX packets:191074 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:79140781 (75.4 Mb) TX bytes:17858634 (17.0 Mb) eth0 Link encap:Ethernet HWaddr 00:14:D1:1C:6F:2B UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:197631 errors:0 dropped:0 overruns:0 frame:0 TX packets:191074 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:79042702 (75.3 Mb) TX bytes:17858634 (17.0 Mb) Interrupt:18 Base address:0x2000 eth1 Link encap:Ethernet HWaddr 00:14:D1:1C:6F:2B UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:575 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:98079 (95.7 Kb) TX bytes:0 (0.0 b) Memory:d3200000-d3220000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Steps to reproduce: |
This task depends upon
dmesg:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-lts (nobody@workstation64) (gcc version 4.5.1 20101125 (prerelease) (GCC) ) #1 SMP Fri Dec 10 14:25:37 UTC 2010
Command line: root=/dev/md2 ro md=2,/dev/sda3,/dev/sdb3,/dev/sdc3,/dev/sdd3 md=3,/dev/sda4,/dev/sdb4,/dev/sdc4,/dev/sdd4
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
BIOS-e820: 000000000008f000 - 0000000000090000 (reserved)
BIOS-e820: 0000000000090000 - 000000000009d000 (usable)
BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cf4bd000 (usable)
BIOS-e820: 00000000cf4bd000 - 00000000cf4bf000 (reserved)
BIOS-e820: 00000000cf4bf000 - 00000000cf5a2000 (usable)
BIOS-e820: 00000000cf5a2000 - 00000000cf7bf000 (ACPI NVS)
BIOS-e820: 00000000cf7bf000 - 00000000cf7df000 (usable)
BIOS-e820: 00000000cf7df000 - 00000000cf7ff000 (ACPI data)
BIOS-e820: 00000000cf7ff000 - 00000000cf800000 (usable)
BIOS-e820: 00000000cf800000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fd000000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
DMI 2.5 present.
last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FF0000000 write-back
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask FE0000000 write-back
5 base 220000000 mask FF0000000 write-back
6 base 0FFFF0000 mask FFFFF0000 write-protect
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xcf800 max_arch_pfn = 0x400000000
e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000001000 (usable)
modified: 0000000000001000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000008f000 (usable)
modified: 000000000008f000 - 0000000000090000 (reserved)
modified: 0000000000090000 - 000000000009d000 (usable)
modified: 000000000009d000 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000cf4bd000 (usable)
modified: 00000000cf4bd000 - 00000000cf4bf000 (reserved)
modified: 00000000cf4bf000 - 00000000cf5a2000 (usable)
modified: 00000000cf5a2000 - 00000000cf7bf000 (ACPI NVS)
modified: 00000000cf7bf000 - 00000000cf7df000 (usable)
modified: 00000000cf7df000 - 00000000cf7ff000 (ACPI data)
modified: 00000000cf7ff000 - 00000000cf800000 (usable)
modified: 00000000cf800000 - 00000000d0000000 (reserved)
modified: 00000000f8000000 - 00000000fd000000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000230000000 (usable)
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cf800000
0000000000 - 00cf800000 page 2M
kernel direct mapping tables up to cf800000 @ 8000-d000
init_memory_mapping: 0000000100000000-0000000230000000
0100000000 - 0230000000 page 2M
kernel direct mapping tables up to 230000000 @ b000-15000
RAMDISK: 37dfc000 - 37fef36c
ACPI: RSDP 00000000000fe020 00024 (v02 INTEL )
ACPI: XSDT 00000000cf7fe120 00074 (v01 INTEL DX58SO 00001450 01000013)
ACPI: FACP 00000000cf7fd000 000F4 (v03 INTEL DX58SO 00001450 MSFT 0100000D)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000450/0 (20090903/tbfadt-557)
ACPI Warning: Invalid length for Pm2ControlBlock: 0, using default 8 (20090903/tbfadt-607)
ACPI: DSDT 00000000cf7f8000 04641 (v02 INTEL DX58SO 00001450 MSFT 0100000D)
ACPI: FACS 00000000cf72a000 00040
ACPI: APIC 00000000cf7f7000 00138 (v02 INTEL DX58SO 00001450 MSFT 0100000D)
ACPI: WDDT 00000000cf7f6000 00040 (v01 INTEL DX58SO 00001450 MSFT 0100000D)
ACPI: MCFG 00000000cf7f5000 0003C (v01 INTEL DX58SO 00001450 MSFT 0100000D)
ACPI: ASF! 00000000cf7f4000 000AC (v32 INTEL DX58SO 00001450 MSFT 0100000D)
ACPI: HPET 00000000cf7f3000 00038 (v01 INTEL DX58SO 00001450 MSFT 0100000D)
ACPI: SSDT 00000000cf7e2000 0E134 (v01 INTEL SSDT PM 00001450 MSFT 0100000D)
ACPI: DMAR 00000000cf7df000 00128 (v01 INTEL DX58SO 00001450 MSFT 0100000D)
ACPI: WDTT 00000000cf7f1000 0020C (v02 INTEL DX58SO 00001450 MSFT 0100000D)
ACPI: ASPT 00000000cf7f2000 00034 (v04 INTEL PerfTune 00001450 MSFT 0100000D)
ACPI: Local APIC address 0xfee00000
(8 early reservations) ==> bootmem [0000000000 - 0230000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 00017c0438] TEXT DATA BSS ==> [0001000000 - 00017c0438]
#3 [0037dfc000 - 0037fef36c] RAMDISK ==> [0037dfc000 - 0037fef36c]
#4 [000009d000 - 0000100000] BIOS reserved ==> [000009d000 - 0000100000]
#5 [00017c1000 - 00017c110d] BRK ==> [00017c1000 - 00017c110d]
#6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
#7 [000000b000 - 0000010000] PGTABLE ==> [000000b000 - 0000010000]
[ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880001800000-ffff8800089fffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00230000
Movable zone start PFN for each node
early_node_map[8] active PFN ranges
0: 0x00000000 -> 0x00000001
0: 0x00000006 -> 0x0000008f
0: 0x00000090 -> 0x0000009d
0: 0x00000100 -> 0x000cf4bd
0: 0x000cf4bf -> 0x000cf5a2
0: 0x000cf7bf -> 0x000cf7df
0: 0x000cf7ff -> 0x000cf800
0: 0x00100000 -> 0x00230000
On node 0 totalpages: 2094424
DMA zone: 56 pages used for memmap
DMA zone: 110 pages reserved
DMA zone: 3825 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 830969 pages, LIFO batch:31
Normal zone: 17024 pages used for memmap
Normal zone: 1228160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 16 CPUs, 8 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000001000 - 0000000000006000
PM: Registered nosave memory: 000000000008f000 - 0000000000090000
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000cf4bd000 - 00000000cf4bf000
PM: Registered nosave memory: 00000000cf5a2000 - 00000000cf7bf000
PM: Registered nosave memory: 00000000cf7df000 - 00000000cf7ff000
PM: Registered nosave memory: 00000000cf800000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fd000000
PM: Registered nosave memory: 00000000fd000000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:28000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880008c00000 s89048 r8192 d21544 u131072
pcpu-alloc: s89048 r8192 d21544 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062954
Kernel command line: root=/dev/md2 ro md=2,/dev/sda3,/dev/sdb3,/dev/sdc3,/dev/sdd3 md=3,/dev/sda4,/dev/sdb4,/dev/sdc4,/dev/sdd4
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800099fd000 - ffff88000d9fd000
software IO TLB at phys 0x99fd000 - 0xd9fd000
Memory: 8169592k/9175040k available (3430k kernel code, 797344k absent, 207192k reserved, 2190k data, 488k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 83886080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2837.099 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5674.19 BogoMIPS (lpj=28370990)
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20090903
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping 05
Booting processor 1 APIC 0x2 ip 0x6000
Initializing CPU#1
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU1: Thermal monitoring enabled (TM1)
CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU1: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x4 ip 0x6000
Initializing CPU#2
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU2: Thermal monitoring enabled (TM1)
CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU2: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x6 ip 0x6000
Initializing CPU#3
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU3: Thermal monitoring enabled (TM1)
CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU3: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Booting processor 4 APIC 0x1 ip 0x6000
Initializing CPU#4
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU4: Thermal monitoring enabled (TM1)
CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU4: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#4]: passed.
Booting processor 5 APIC 0x3 ip 0x6000
Initializing CPU#5
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU5: Thermal monitoring enabled (TM1)
CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU5: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#5]: passed.
Booting processor 6 APIC 0x5 ip 0x6000
Initializing CPU#6
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU6: Thermal monitoring enabled (TM1)
CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU6: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#6]: passed.
Booting processor 7 APIC 0x7 ip 0x6000
Initializing CPU#7
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 8192K
CPU7: Thermal monitoring enabled (TM1)
CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU7: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping 05
checking TSC synchronization [CPU#0 -> CPU#7]: passed.
Brought up 8 CPUs
Total of 8 processors activated (45401.15 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0,4 level SIBLING
groups: 0 (cpu_power = 589) 4 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
CPU1 attaching sched-domain:
domain 0: span 1,5 level SIBLING
groups: 1 (cpu_power = 589) 5 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
CPU2 attaching sched-domain:
domain 0: span 2,6 level SIBLING
groups: 2 (cpu_power = 589) 6 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
CPU3 attaching sched-domain:
domain 0: span 3,7 level SIBLING
groups: 3 (cpu_power = 589) 7 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
CPU4 attaching sched-domain:
domain 0: span 0,4 level SIBLING
groups: 4 (cpu_power = 589) 0 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178)
CPU5 attaching sched-domain:
domain 0: span 1,5 level SIBLING
groups: 5 (cpu_power = 589) 1 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178)
CPU6 attaching sched-domain:
domain 0: span 2,6 level SIBLING
groups: 6 (cpu_power = 589) 2 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 2,6 (cpu_power = 1178) 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178)
CPU7 attaching sched-domain:
domain 0: span 3,7 level SIBLING
groups: 7 (cpu_power = 589) 3 (cpu_power = 589)
domain 1: span 0-7 level MC
groups: 3,7 (cpu_power = 1178) 0,4 (cpu_power = 1178) 1,5 (cpu_power = 1178) 2,6 (cpu_power = 1178)
devtmpfs: initialized
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG at f8000000 - fbffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:19.0: reg 10 32bit mmio: [0xd3200000-0xd321ffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xd3223000-0xd3223fff]
pci 0000:00:19.0: reg 18 io port: [0x4100-0x411f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x40e0-0x40ff]
pci 0000:00:1a.1: reg 20 io port: [0x40c0-0x40df]
pci 0000:00:1a.2: reg 20 io port: [0x40a0-0x40bf]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xd3222000-0xd32223ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x4080-0x409f]
pci 0000:00:1d.1: reg 20 io port: [0x4060-0x407f]
pci 0000:00:1d.2: reg 20 io port: [0x4040-0x405f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xd3221000-0xd32213ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f)
pci 0000:00:1f.2: reg 10 io port: [0x4128-0x412f]
pci 0000:00:1f.2: reg 14 io port: [0x4134-0x4137]
pci 0000:00:1f.2: reg 18 io port: [0x4120-0x4127]
pci 0000:00:1f.2: reg 1c io port: [0x4130-0x4133]
pci 0000:00:1f.2: reg 20 io port: [0x4020-0x403f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xd3220000-0xd32207ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xf0000000-0xf00000ff]
pci 0000:00:1f.3: reg 20 io port: [0x4000-0x401f]
pci 0000:02:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff]
pci 0000:02:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:02:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff]
pci 0000:02:00.0: reg 24 io port: [0x3000-0x307f]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfff80000-0xffffffff]
pci 0000:00:03.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:03.0: bridge 32bit mmio: [0xd0000000-0xd2ffffff]
pci 0000:00:03.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:06:00.0: reg 10 io port: [0x2018-0x201f]
pci 0000:06:00.0: reg 14 io port: [0x2024-0x2027]
pci 0000:06:00.0: reg 18 io port: [0x2010-0x2017]
pci 0000:06:00.0: reg 1c io port: [0x2020-0x2023]
pci 0000:06:00.0: reg 20 io port: [0x2000-0x200f]
pci 0000:06:00.0: reg 24 32bit mmio: [0xd3100000-0xd31003ff]
pci 0000:06:00.0: supports D1
pci 0000:06:00.0: PME# supported from D0 D1 D3hot
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xd3100000-0xd31fffff]
pci 0000:07:02.0: reg 10 io port: [0x1000-0x10ff]
pci 0000:07:02.0: reg 14 32bit mmio: [0xd3000000-0xd30000ff]
pci 0000:07:02.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
pci 0000:07:02.0: supports D1 D2
pci 0000:07:02.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:07:02.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xd3000000-0xd30fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: ioport range 0x500-0x53f has been reserved
system 00:05: ioport range 0x400-0x47f has been reserved
system 00:05: ioport range 0x680-0x6ff has been reserved
pci 0000:02:00.0: BAR 6: no parent found for of device [0xfff80000-0xffffffff]
pci 0000:07:02.0: BAR 6: address space collision on of device [0xfffe0000-0xffffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: disabled
pci 0000:00:01.0: PREFETCH window: disabled
pci 0000:02:00.0: BAR 6: can't allocate mem resource [0xf0000000-0xefffffff]
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0: IO window: 0x3000-0x3fff
pci 0000:00:03.0: MEM window: 0xd0000000-0xd2ffffff
pci 0000:00:03.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
pci 0000:00:07.0: IO window: disabled
pci 0000:00:07.0: MEM window: disabled
pci 0000:00:07.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: disabled
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.4: IO window: 0x2000-0x2fff
pci 0000:00:1c.4: MEM window: 0xd3100000-0xd31fffff
pci 0000:00:1c.4: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
pci 0000:00:1e.0: IO window: 0x1000-0x1fff
pci 0000:00:1e.0: MEM window: 0xd3000000-0xd30fffff
pci 0000:00:1e.0: PREFETCH window: 0xd3300000-0xd33fffff
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:02: resource 1 mem: [0xd0000000-0xd2ffffff]
pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xefffffff]
pci_bus 0000:06: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:06: resource 1 mem: [0xd3100000-0xd31fffff]
pci_bus 0000:07: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:07: resource 1 mem: [0xd3000000-0xd30fffff]
pci_bus 0000:07: resource 2 pref mem [0xd3300000-0xd33fffff]
pci_bus 0000:07: resource 3 io: [0x00-0xffff]
pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 1996k freed
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fe710000 flags: 0x1
IOMMU fe710000: ver 1:0 cap c90780106f0462 ecap f020fa
DMAR: RMRR base: 0x000000000e9000 end: 0x000000000e9fff
DMAR: RMRR base: 0x000000000ea000 end: 0x000000000eafff
DMAR: RMRR base: 0x000000000eb000 end: 0x000000000ebfff
DMAR: RMRR base: 0x000000000e6000 end: 0x000000000e6fff
DMAR: RMRR base: 0x000000000e7000 end: 0x000000000e7fff
DMAR: RMRR base: 0x000000000e8000 end: 0x000000000e8fff
DMAR: RMRR base: 0x000000000ec000 end: 0x000000000eefff
DMAR: No ATSR found
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1293410277.440:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15961
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 25 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:07.0: irq 26 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.1: irq 28 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.4: irq 29 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:00:07.0:pcie02: service driver aer loaded
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:02: setting system clock to 2010-12-27 00:37:57 UTC (1293410277)
Initalizing network drop monitor service
Freeing unused kernel memory: 488k freed
udev[88]: starting version 164
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
pata_acpi 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:06:00.0: setting latency timer to 64
pata_acpi 0000:06:00.0: PCI INT A disabled
pata_marvell 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_marvell 0000:06:00.0: setting latency timer to 64
scsi0 : pata_marvell
scsi1 : pata_marvell
ata1: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 16
ata2: PATA max UDMA/133 cmd 0x2010 ctl 0x2020 bmdma 0x2008 irq 16
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 irq_stat 0x00400040, cirq 30
ata4: SATA max UDMA/133 abar m2048@0xd3220000 port 0xd3220180 irq 30
ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
ata7: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
ata8: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
ata4: SATA link down (SStatus 0 SControl 300)
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: ATA-8: WDC WD3200AAJS-00L7A0, 01.03E01, max UDMA/133
ata8.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: ATA-8: WDC WD3200AAJS-00L7A0, 01.03E01, max UDMA/133
ata5.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata6.00: ATA-8: WDC WD3200AAJS-00L7A0, 01.03E01, max UDMA/133
ata6.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata7.00: ATA-8: WDC WD3200AAJS-00L7A0, 01.03E01, max UDMA/133
ata7.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
ata5.00: configured for UDMA/133
ata8.00: configured for UDMA/133
ata7.00: configured for UDMA/133
ata3.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 01.0 PQ: 0 ANSI: 5
scsi 5:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 01.0 PQ: 0 ANSI: 5
scsi 6:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 01.0 PQ: 0 ANSI: 5
scsi 7:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 01.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 5:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 6:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc:
sdb:
sdd:
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sdd1 sdd2 sdd3 sdd4
sdc1 sdc2 sdc3 sdc4
sd 6:0:0:0: [sdc] Attached SCSI disk
sda1 sda2 sda3 sda4
sdb1 sdb2 sdb3 sdb4
sd 7:0:0:0: [sdd] Attached SCSI disk
sd 4:0:0:0: [sda] Attached SCSI disk
sd 5:0:0:0: [sdb] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
md: md2 stopped.
md: bind<sdb3>
md: bind<sdc3>
md: bind<sdd3>
md: bind<sda3>
md: raid1 personality registered for level 1
raid1: raid set md2 active with 4 out of 4 mirrors
md2: detected capacity change from 0 to 104862971904
md2: unknown partition table
md: md3 stopped.
md: bind<sdb4>
md: bind<sdc4>
md: bind<sdd4>
md: bind<sda4>
raid1: raid set md3 active with 4 out of 4 mirrors
md3: detected capacity change from 0 to 198302152704
md3: unknown partition table
EXT4-fs (md2): mounted filesystem with ordered data mode
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[999]: starting version 164
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sr 2:0:0:0: Attached scsi generic sg0 type 5
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: Attached scsi generic sg4 type 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PC Speaker as /devices/platform/pcspkr/input/input1
ACPI: WMI: Mapper loaded
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:07:02.0: no PCI Express capability
eth0: RTL8169sb/8110sb at 0xffffc90004082000, 00:14:d1:1c:6f:2b, XID 10000000 IRQ 18
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-3 state
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
0000:00:19.0: eth1: (PCI Express:2.5GB/s:Width x1) 70:71:bc:5b:ec:cf
0000:00:19.0: eth1: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth1: MAC: 7, PHY: 8, PBA No: ffffff-0ff
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd3222000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040e0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd3221000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x000040a0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for pl2303
pl2303 2-1:1.0: pl2303 converter detected
usb 2-1: pl2303 converter now attached to ttyUSB0
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
EXT4-fs (sda1): mounted filesystem with ordered data mode
REISERFS (device md3): found reiserfs format "3.6" with standard journal
REISERFS (device md3): using ordered data mode
REISERFS (device md3): journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device md3): checking transaction log (md3)
REISERFS (device md3): Using r5 hash to sort names
Adding 16394324k swap on /dev/sda2. Priority:-1 extents:1 across:16394324k
Adding 16394324k swap on /dev/sdb2. Priority:-2 extents:1 across:16394324k
Adding 16394324k swap on /dev/sdc2. Priority:-3 extents:1 across:16394324k
Adding 16394324k swap on /dev/sdd2. Priority:-4 extents:1 across:16394324k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
bonding: MII link monitoring set to 100 ms
ADDRCONF(NETDEV_UP): bond0: link is not ready
r8169: eth0: link up
bonding: bond0: making interface eth0 the new active one.
bonding: bond0: first active interface up!
bonding: bond0: enslaving eth0 as an active interface with an up link.
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
bonding: bond0: enslaving eth1 as a backup interface with a down link.
e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:00:19.0: eth1: 10/100 speed: disabling TSO
bonding: bond0: link status definitely up for interface eth1.
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
bond0: no IPv6 routers present
Personalities : [raid1]
md3 : active raid1 sda4[0] sdd4[3] sdc4[2] sdb4[1]
193654446 blocks super 1.2 [4/4] [UUUU]
md2 : active raid1 sda3[0] sdd3[3] sdc3[2] sdb3[1]
102405246 blocks super 1.2 [4/4] [UUUU]
unused devices: <none>
[root@agra home]# lspci
00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13)
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13)
00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13)
00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13)
00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13)
00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13)
00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13)
00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13)
00:19.0 Ethernet controller: Intel Corporation 82567LM-2 Gigabit Network Connection
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
02:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9500 GT] (rev a1)
06:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b2)
07:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
[root@agra home]# lsmod
Module Size Used by
xt_tcpudp 2575 22
xt_limit 2113 13
ipt_LOG 5275 7
xt_state 1335 1
nf_nat_ftp 2255 0
nf_conntrack_ftp 6093 1 nf_nat_ftp
nf_nat_irc 1350 0
nf_conntrack_irc 3459 1 nf_nat_irc
ipt_MASQUERADE 1618 1
iptable_mangle 2977 0
iptable_nat 4715 1
nf_nat 15067 4 nf_nat_ftp,nf_nat_irc,ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 11141 4 iptable_nat,nf_nat
nf_conntrack 54615 9 xt_state,nf_nat_ftp,nf_conntrack_ftp,nf_nat_irc,nf_conntrack_irc,ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4 1219 1 nf_conntrack_ipv4
iptable_filter 2370 1
ip_tables 16677 3 iptable_mangle,iptable_nat,iptable_filter
x_tables 15158 7 xt_tcpudp,xt_limit,ipt_LOG,xt_state,ipt_MASQUERADE,iptable_nat,ip_tables
bonding 87683 0
ipv6 276263 45 bonding
reiserfs 235764 1
pl2303 16522 0
usbserial 31914 1 pl2303
psmouse 56790 0
uhci_hcd 22222 0
ehci_hcd 36274 0
serio_raw 4366 0
processor 30012 8
button 4746 0
r8169 36946 0
mii 3802 1 r8169
i2c_i801 8558 0
i2c_core 18070 1 i2c_i801
e1000e 124337 0
thermal 11962 0
evdev 8519 0
wmi 4611 0
pcspkr 1795 0
usbcore 139063 5 pl2303,usbserial,uhci_hcd,ehci_hcd
sg 24808 0
iTCO_wdt 10413 0
iTCO_vendor_support 1841 1 iTCO_wdt
ext4 335910 2
mbcache 5658 1 ext4
jbd2 74239 1 ext4
crc16 1273 1 ext4
raid1 21391 2
md_mod 83938 3 raid1
sr_mod 14442 0
cdrom 35562 1 sr_mod
sd_mod 26529 17
pata_marvell 2629 0
pata_acpi 3224 0
ahci 34835 13
libata 151906 3 pata_marvell,pata_acpi,ahci
scsi_mod 92196 4 sg,sr_mod,sd_mod,libata
[root@agra home]# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
i changed xfs to reiserfs
it's running upper a raid1 (md linux raid) with 4 disks
i made a
lsof
dmesg problem:
general protection fault: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host4/target4:0:0/4:0:0:0/type
CPU 0
Modules linked in: xt_tcpudp xt_limit ipt_LOG xt_state nf_nat_ftp nf_conntrack_ftp nf_nat_irc nf_conntrack_irc ipt_MASQUERADE iptable_mangle iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables x_tables bonding ipv6 reiserfs pl2303 usbhid hid usbserial uhci_hcd ehci_hcd usbcore i2c_i801 processor iTCO_wdt iTCO_vendor_support r8169 mii e1000e psmouse evdev thermal pcspkr i2c_core wmi serio_raw sg button ext4 mbcache jbd2 crc16 raid1 md_mod sr_mod cdrom sd_mod pata_marvell pata_acpi ahci libata scsi_mod
Pid: 10663, comm: lsof Not tainted 2.6.32-lts #1
RIP: 0010:[<ffffffff81171032>] [<ffffffff81171032>] show_map_vma+0x42/0x220
RSP: 0018:ffff8801ac51bda8 EFLAGS: 00010206
RAX: 0000800000001900 RBX: ffff8801db8d5e40 RCX: 0000000000001900
RDX: ffff8801ac51bea8 RSI: ffff8801db8d5e40 RDI: ffff88009676f400
RBP: ffff8801ac51be38 R08: 00000000fffffffb R09: 00000000fffffffc
R10: 0000000000000000 R11: 0000000000000007 R12: 0100000000800000
R13: ffff88009676f400 R14: 0000000000000387 R15: ffff8801ac51bea8
FS: 00007f9d90ece700(0000) GS:ffff880008c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f9d90eda000 CR3: 00000001d96db000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process lsof (pid: 10663, threadinfo ffff8801ac51a000, task ffff8800ae26e200)
Stack:
ffff88010000002d 0000000000000070 0000000000000000 ffff880200000000
<0> ffff880100000000 0000000000000000 ffff8801ac51be04 ffffffff81355e59
<0> ffff8801ac51be18 807603e8f9e3ff7a 2222222222222222 00000030cf2ac080
Call Trace:
[<ffffffff81355e59>] ? mutex_unlock+0x9/0x10
[<ffffffff811713b7>] show_map+0x27/0x70
[<ffffffff8113cacf>] seq_read+0x29f/0x3f0
[<ffffffff8111fc73>] vfs_read+0xb3/0x190
[<ffffffff8111fd9c>] sys_read+0x4c/0x80
[<ffffffff81011ec2>] system_call_fastpath+0x16/0x1b
Code: 89 65 e0 4c 89 75 f0 49 89 fd 4c 89 7d f8 48 8b 06 4c 8b a6 98 00 00 00 48 89 45 b8 48 8b 46 30 4d 85 e4 89 c1 0f 84 4e 01 00 00 <49> 8b 54 24 18 48 8b bb 90 00 00 00 48 8b 52 10 48 c1 e7 0c 48
RIP [<ffffffff81171032>] show_map_vma+0x42/0x220
RSP <ffff8801ac51bda8>
---[ end trace 1d804710b94e2257 ]---
101227 0:31:09 [ERROR] mysqld got signal 11 ;
This could be because you hit a bug. It is also possible that this binary
or one of the libraries it was linked against is corrupt, improperly built,
or misconfigured. This error can also be caused by malfunctioning hardware.
We will try our best to scrape up some info that will hopefully help diagnose
the problem, but since we have already crashed, something is definitely wrong
and this may fail.
key_buffer_size=0
read_buffer_size=4194304
max_used_connections=3
max_threads=102
threads_connected=2
It is possible that mysqld could use up to
key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 836831 K
bytes of memory
Hope that's ok; if not, decrease some variables in the equation.
thd: 0x2cc4290
Attempting backtrace. You can use the following information to find out
where mysqld died. If you see no messages after this, something went
terribly wrong...
stack_bottom = 0x7f50bbf48e98 thread_stack 0x48000
/usr/mariadb/bin/mysqld(my_print_stacktrace+0x2e) [0x9afcfe]
/usr/mariadb/bin/mysqld(handle_segfault+0x375) [0x607c55]
/lib/libpthread.so.0(+0xf1c0) [0x7f50f4a3f1c0]
/usr/mariadb/bin/mysqld() [0x9ae89d]
/usr/mariadb/bin/mysqld(ha_key_cmp+0xc5d) [0x9af56d]
/usr/mariadb/bin/mysqld() [0x7a06f9]
/usr/mariadb/bin/mysqld(my_qsort2+0x442) [0x9a28f2]
/usr/mariadb/bin/mysqld() [0x7b812e]
/usr/mariadb/bin/mysqld(_create_index_by_sort+0x660) [0x7ba150]
/usr/mariadb/bin/mysqld(mi_repair_by_sort+0x884) [0x7a5024]
/usr/mariadb/bin/mysqld(ha_myisam::repair(THD*, st_handler_check_param&, bool)+0 x755) [0x78a165]
/usr/mariadb/bin/mysqld(ha_myisam::enable_indexes(unsigned int)+0x14f) [0x78ba6f ]
/usr/mariadb/bin/mysqld(ha_myisam::end_bulk_insert()+0x66) [0x78bba6]
/usr/mariadb/bin/mysqld(mysql_alter_table(THD*, char*, char*, st_ha_create_infor mation*, TABLE_LIST*, Alter_info*, unsigned int, st_order*, bool)+0x1cab) [0x70d 6cb]
/usr/mariadb/bin/mysqld(mysql_execute_command(THD*)+0x89e) [0x616e2e]
/usr/mariadb/bin/mysqld(mysql_parse(THD*, char*, unsigned int, char const**)+0x2 99) [0x61cc09]
/usr/mariadb/bin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsig ned int)+0xb6b) [0x61d77b]
/usr/mariadb/bin/mysqld(do_command(THD*)+0x101) [0x61e171]
/usr/mariadb/bin/mysqld(handle_one_connection+0xd2) [0x60f8a2]
/lib/libpthread.so.0(+0x6cb0) [0x7f50f4a36cb0]
/lib/libc.so.6(clone+0x6d) [0x7f50f400d9dd]
Trying to get some variables.
Some pointers may be invalid and cause the dump to abort...
thd->query at 0x2b04fd8 = ALTER TABLE est_mov ENGINE=MYISAM
thd->thread_id=16
thd->killed=NOT_KILLED
The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains
information that should help you find out what is causing the crash.
i will test a new kernel when i get acces to it again, but i think that´s a problem on all core i7, since i have another one with the same problem, and i installed ubuntu server instead archlinux
EDIT: Oops, just noticed it is a problem in XFS - might be the combination XFS+i7.
i will check if ok
i checked that i5 have some problems with my usb network card
maybe the overclock (that feature that make clock higher and after slower) is a problem for usb