Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.35-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #2 SMP PREEMPT Sat Aug 14 21:58:00 CEST 2010 Command line: root=/dev/mapper/VolGroup00-Root ro vga=0x031B BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009b800 (usable) BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable) BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data) BIOS-e820: 000000007ffae000 - 000000007fff0000 (ACPI NVS) BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x7ffa0 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009b800 (usable) modified: 000000000009b800 - 00000000000a0000 (reserved) modified: 00000000000e0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000007ffa0000 (usable) modified: 000000007ffa0000 - 000000007ffae000 (ACPI data) modified: 000000007ffae000 - 000000007fff0000 (ACPI NVS) modified: 000000007fff0000 - 0000000080000000 (reserved) modified: 00000000fec00000 - 00000000fec01000 (reserved) modified: 00000000fee00000 - 00000000fef00000 (reserved) modified: 00000000ff700000 - 0000000100000000 (reserved) initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000ff780] ff780 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-000000007ffa0000 0000000000 - 0040000000 page 1G 0040000000 - 007fe00000 page 2M 007fe00000 - 007ffa0000 page 4k kernel direct mapping tables up to 7ffa0000 @ 16000-19000 RAMDISK: 37ce2000 - 37ff0000 ACPI: RSDP 00000000000fb580 00014 (v00 ACPIAM) ACPI: RSDT 000000007ffa0000 00044 (v01 7612MS A7612200 20091215 MSFT 00000097) ACPI: FACP 000000007ffa0200 00084 (v01 7612MS A7612200 20091215 MSFT 00000097) ACPI: DSDT 000000007ffa0450 08E27 (v01 A7612 A7612200 00000200 INTL 20051117) ACPI: FACS 000000007ffae000 00040 ACPI: APIC 000000007ffa0390 00080 (v01 7612MS A7612200 20091215 MSFT 00000097) ACPI: MCFG 000000007ffa0410 0003C (v01 7612MS OEMMCFG 20091215 MSFT 00000097) ACPI: OEMB 000000007ffae040 00073 (v01 7612MS A7612200 20091215 MSFT 00000097) ACPI: HPET 000000007ffaa450 00038 (v01 7612MS OEMHPET0 20091215 MSFT 00000097) ACPI: INFO 000000007ffae0c0 00124 (v01 7612MS AMDINFO 20091215 MSFT 00000097) ACPI: NVHD 000000007ffae1f0 00284 (v01 7612MS NVHDCP 20091215 MSFT 00000097) ACPI: SSDT 000000007ffaa490 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009b 0: 0x00000100 -> 0x0007ffa0 On node 0 totalpages: 524075 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3923 pages, LIFO batch:0 DMA32 zone: 7111 pages used for memmap DMA32 zone: 512985 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x2008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10de8201 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 early_res array is doubled to 64 at [18100 - 188ff] PM: Registered nosave memory: 000000000009b000 - 000000000009c000 PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88832 r8192 d21760 u524288 pcpu-alloc: s88832 r8192 d21760 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516908 Kernel command line: root=/dev/mapper/VolGroup00-Root ro vga=0x031B PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ be8a000000 size 32 MB Aperture beyond 4GB. Ignoring. Subtract (50 early reservations) #1 [0001000000 - 00016f9598] TEXT DATA BSS #2 [0037ce2000 - 0037ff0000] RAMDISK #3 [00016fa000 - 00016fa149] BRK #4 [00000ff790 - 0000100000] BIOS reserved #5 [00000ff780 - 00000ff790] MP-table mpf #6 [000009b800 - 00000fdce0] BIOS reserved #7 [00000fde3c - 00000ff780] BIOS reserved #8 [00000fdce0 - 00000fde3c] MP-table mpc #9 [0000010000 - 0000012000] TRAMPOLINE #10 [0000012000 - 0000016000] ACPI WAKEUP #11 [0000016000 - 0000018000] PGTABLE #12 [00016fa180 - 00016fb180] BOOTMEM #13 [0000018000 - 0000018100] BOOTMEM #14 [0001efc000 - 0001efd000] BOOTMEM #15 [0001efd000 - 0001efe000] BOOTMEM #16 [0002000000 - 0003c00000] MEMMAP 0 #17 [00016fb180 - 0001713180] BOOTMEM #18 [0001713180 - 000172b180] BOOTMEM #19 [000172c000 - 000172d000] BOOTMEM #20 [00016f95c0 - 00016f9601] BOOTMEM #21 [00016f9640 - 00016f9683] BOOTMEM #22 [00016f96c0 - 00016f9928] BOOTMEM #23 [00016f9940 - 00016f99a8] BOOTMEM #24 [00016f99c0 - 00016f9a28] BOOTMEM #25 [00016f9a40 - 00016f9aa8] BOOTMEM #26 [00016f9ac0 - 00016f9b28] BOOTMEM #27 [00016f9b40 - 00016f9ba8] BOOTMEM #28 [00016f9bc0 - 00016f9c28] BOOTMEM #29 [00016f9c40 - 00016f9ca8] BOOTMEM #30 [00016f9cc0 - 00016f9d28] BOOTMEM #31 [00016f9d40 - 00016f9da8] BOOTMEM #32 [00016f9dc0 - 00016f9e28] BOOTMEM #33 [00016f9e40 - 00016f9e60] BOOTMEM #34 [00016f9e80 - 00016f9eaf] BOOTMEM #35 [00016f9ec0 - 00016f9eef] BOOTMEM #36 [0001800000 - 000181d000] BOOTMEM #37 [0001880000 - 000189d000] BOOTMEM #38 [0001900000 - 000191d000] BOOTMEM #39 [0001980000 - 000199d000] BOOTMEM #40 [00016f9f00 - 00016f9f08] BOOTMEM #41 [00016f9f40 - 00016f9f48] BOOTMEM #42 [00016f9f80 - 00016f9f90] BOOTMEM #43 [00016f9fc0 - 00016f9fe0] BOOTMEM #44 [000172b180 - 000172b2b0] BOOTMEM #45 [000172b2c0 - 000172b310] BOOTMEM #46 [000172b340 - 000172b390] BOOTMEM #47 [000172d000 - 0001735000] BOOTMEM #48 [000199d000 - 0001b9d000] BOOTMEM #49 [0001b9d000 - 0001c9d000] BOOTMEM Memory: 2053540k/2096768k available (3542k kernel code, 468k absent, 42760k reserved, 1834k data, 488k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:768 spurious 8259A interrupt: IRQ7. Console: colour dummy device 80x25 console [tty0] enabled allocated 20971520 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT Detected 3200.288 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6403.25 BogoMIPS (lpj=10667613) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20100428 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) II X4 955 Processor stepping 03 Booting Node 0, Processors #1 #2 #3 Ok. Brought up 4 CPUs Total of 4 processors activated (25610.43 BogoMIPS). devtmpfs: initialized NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 0000000080000000 aka 2048M Fam 10h mmconf [e0000000, efffffff] node 0 link 0: mmio [e0000000, efffffff] ==> none node 0 link 0: mmio [80000000, dfffffff] node 0 link 0: mmio [f0000000, fe0bffff] node 0 link 0: mmio [a0000, bffff] bus: [00, 07] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0x80000000-0xdfffffff] bus: 00 index 2 [mem 0xf0000000-0xfcffffffff] bus: 00 index 3 [mem 0x000a0000-0x000bffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources ACPI Warning: Incorrect checksum in table [OEMB] - 0x56, should be 0x4E (20100428/tbutils-314) ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xdfffffff] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfed44fff] pci 0000:00:01.0: reg 10: [io 0x2f00-0x2fff] pci 0000:00:01.1: reg 10: [io 0x2900-0x293f] pci 0000:00:01.1: reg 20: [io 0x2d00-0x2d3f] pci 0000:00:01.1: reg 24: [io 0x2e00-0x2e3f] pci 0000:00:01.1: PME# supported from D3hot D3cold pci 0000:00:01.1: PME# disabled pci 0000:00:01.3: reg 10: [mem 0xf9f80000-0xf9ffffff] pci 0000:00:02.0: reg 10: [mem 0xf9f7f000-0xf9f7ffff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:02.1: reg 10: [mem 0xf9f7ec00-0xf9f7ecff] pci 0000:00:02.1: supports D1 D2 pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:02.1: PME# disabled pci 0000:00:04.0: reg 10: [mem 0xf9f7d000-0xf9f7dfff] pci 0000:00:04.0: supports D1 D2 pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:04.1: reg 10: [mem 0xf9f7e800-0xf9f7e8ff] pci 0000:00:04.1: supports D1 D2 pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.1: PME# disabled pci 0000:00:07.0: reg 10: [mem 0xf9f78000-0xf9f7bfff] pci 0000:00:07.0: PME# supported from D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:09.0: reg 10: [io 0xc080-0xc087] pci 0000:00:09.0: reg 14: [io 0xc000-0xc003] pci 0000:00:09.0: reg 18: [io 0xbc00-0xbc07] pci 0000:00:09.0: reg 1c: [io 0xb880-0xb883] pci 0000:00:09.0: reg 20: [io 0xb800-0xb80f] pci 0000:00:09.0: reg 24: [mem 0xf9f76000-0xf9f77fff] pci 0000:00:0a.0: reg 10: [mem 0xf9f7c000-0xf9f7cfff] pci 0000:00:0a.0: reg 14: [io 0xb480-0xb487] pci 0000:00:0a.0: reg 18: [mem 0xf9f7e400-0xf9f7e4ff] pci 0000:00:0a.0: reg 1c: [mem 0xf9f7e000-0xf9f7e00f] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.0: PME# disabled pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:13.0: PME# disabled pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.0: PME# disabled pci 0000:01:07.0: reg 10: [io 0xdc00-0xdc1f] pci 0000:01:07.0: reg 14: [io 0xd880-0xd8ff] pci 0000:01:07.0: supports D2 pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:00:08.0: bridge window [io 0xd000-0xdfff] pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci 0000:00:08.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode) pci 0000:00:08.0: bridge window [mem 0xf0000000-0xfed44fff] (subtractive decode) pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:10.0: PCI bridge to [bus 02-05] pci 0000:00:10.0: bridge window [io 0xe000-0xefff] pci 0000:00:10.0: bridge window [mem 0xfa000000-0xfebfffff] pci 0000:00:10.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:03:02.0: PME# supported from D0 D3hot D3cold pci 0000:03:02.0: PME# disabled pci 0000:02:00.0: PCI bridge to [bus 03-05] pci 0000:02:00.0: bridge window [io 0xe000-0xefff] pci 0000:02:00.0: bridge window [mem 0xfa000000-0xfebfffff] pci 0000:02:00.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:04:00.0: reg 10: [mem 0xfd000000-0xfdffffff] pci 0000:04:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:04:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit] pci 0000:04:00.0: reg 24: [io 0xec00-0xec7f] pci 0000:04:00.0: reg 30: [mem 0xfcfe0000-0xfcffffff pref] pci 0000:03:00.0: PCI bridge to [bus 04-04] pci 0000:03:00.0: bridge window [io 0xe000-0xefff] pci 0000:03:00.0: bridge window [mem 0xfa000000-0xfdffffff] pci 0000:03:00.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:03:02.0: PCI bridge to [bus 05-05] pci 0000:03:02.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:03:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:03:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:13.0: PCI bridge to [bus 06-06] pci 0000:00:13.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:13.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:13.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:14.0: PCI bridge to [bus 07-07] pci 0000:00:14.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:14.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:14.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *15 ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *11 ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *15 ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *14 ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7 ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *15 ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *14 HEST: Table is not found! vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009b800 - 000000000009ffff reserve RAM buffer: 000000007ffa0000 - 000000007fffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 comparators, 32-bit 25.000000 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:05: [io 0x04d0-0x04d1] has been reserved system 00:05: [io 0x0800-0x080f] has been reserved system 00:05: [io 0x2000-0x207f] has been reserved system 00:05: [io 0x2080-0x20ff] has been reserved system 00:05: [io 0x2400-0x247f] has been reserved system 00:05: [io 0x2480-0x24ff] has been reserved system 00:05: [io 0x2800-0x287f] has been reserved system 00:05: [io 0x2880-0x28ff] has been reserved system 00:05: [mem 0x000d0000-0x000d3fff window] has been reserved system 00:05: [mem 0x000d4000-0x000d7fff window] has been reserved system 00:05: [mem 0x000de000-0x000dffff window] has been reserved system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved system 00:09: [io 0x0a00-0x0adf] has been reserved system 00:09: [io 0x0ae0-0x0aef] has been reserved system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0b: [mem 0x000c0000-0x000cffff] has been reserved system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0b: [mem 0x00100000-0x7fffffff] could not be reserved system 00:0b: [mem 0xfed45000-0xffffffff] could not be reserved pci 0000:00:08.0: PCI bridge to [bus 01-01] pci 0000:00:08.0: bridge window [io 0xd000-0xdfff] pci 0000:00:08.0: bridge window [mem disabled] pci 0000:00:08.0: bridge window [mem pref disabled] pci 0000:03:00.0: PCI bridge to [bus 04-04] pci 0000:03:00.0: bridge window [io 0xe000-0xefff] pci 0000:03:00.0: bridge window [mem 0xfa000000-0xfdffffff] pci 0000:03:00.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:03:02.0: PCI bridge to [bus 05-05] pci 0000:03:02.0: bridge window [io disabled] pci 0000:03:02.0: bridge window [mem disabled] pci 0000:03:02.0: bridge window [mem pref disabled] pci 0000:02:00.0: PCI bridge to [bus 03-05] pci 0000:02:00.0: bridge window [io 0xe000-0xefff] pci 0000:02:00.0: bridge window [mem 0xfa000000-0xfebfffff] pci 0000:02:00.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:10.0: PCI bridge to [bus 02-05] pci 0000:00:10.0: bridge window [io 0xe000-0xefff] pci 0000:00:10.0: bridge window [mem 0xfa000000-0xfebfffff] pci 0000:00:10.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:13.0: PCI bridge to [bus 06-06] pci 0000:00:13.0: bridge window [io disabled] pci 0000:00:13.0: bridge window [mem disabled] pci 0000:00:13.0: bridge window [mem pref disabled] pci 0000:00:14.0: PCI bridge to [bus 07-07] pci 0000:00:14.0: bridge window [io disabled] pci 0000:00:14.0: bridge window [mem disabled] pci 0000:00:14.0: bridge window [mem pref disabled] pci 0000:00:08.0: setting latency timer to 64 ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19 pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:10.0: setting latency timer to 64 pci 0000:02:00.0: setting latency timer to 64 pci 0000:03:00.0: setting latency timer to 64 pci 0000:03:02.0: setting latency timer to 64 ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 18 pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:13.0: setting latency timer to 64 ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 17 pci 0000:00:14.0: PCI INT A -> Link[LN4A] -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:14.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed44fff] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:01: resource 8 [mem 0x80000000-0xdfffffff] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed44fff] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfebfffff] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfebfffff] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfdffffff] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 1024 (order: 3, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) NET: Registered protocol family 1 pci 0000:00:08.0: Enabling HT MSI Mapping pci 0000:00:09.0: Enabling HT MSI Mapping pci 0000:00:0a.0: Enabling HT MSI Mapping pci 0000:04:00.0: Boot video device PCI: CLS 64 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 3128k freed Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1282215503.529:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 4016 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:10.0: setting latency timer to 64 pcieport 0000:00:10.0: irq 40 for MSI/MSI-X pcieport 0000:00:13.0: setting latency timer to 64 pcieport 0000:00:13.0: irq 41 for MSI/MSI-X pcieport 0000:00:14.0: setting latency timer to 64 pcieport 0000:00:14.0: irq 42 for MSI/MSI-X vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90010100000, using 10240k, total 14336k vesafb: mode is 1280x1024x32, linelength=5120, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device ERST: Table is not found! Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 488k freed udev: starting version 161 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23 ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:02.1: setting latency timer to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 ehci_hcd 0000:00:02.1: cache line size of 64 is not supported ehci_hcd 0000:00:02.1: irq 23, io mem 0xf9f7ec00 SCSI subsystem initialized ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ACPI: PCI Interrupt Link [UB12] enabled at IRQ 22 ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:04.1: setting latency timer to 64 ehci_hcd 0000:00:04.1: EHCI Host Controller ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:04.1: debug port 1 ehci_hcd 0000:00:04.1: cache line size of 64 is not supported ehci_hcd 0000:00:04.1: irq 22, io mem 0xf9f7e800 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Floppy drive(s): fd0 is 1.44M ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected libata version 3.00 loaded. ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21 ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21 ohci_hcd 0000:00:02.0: setting latency timer to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller FDC 0 is a post-1991 82077 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.0: irq 21, io mem 0xf9f7f000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected ACPI: PCI Interrupt Link [UB11] enabled at IRQ 20 ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:04.0: setting latency timer to 64 ohci_hcd 0000:00:04.0: OHCI Host Controller ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:04.0: irq 20, io mem 0xf9f7d000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected ahci 0000:00:09.0: version 3.0 ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 ahci 0000:00:09.0: irq 43 for MSI/MSI-X ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio sxs boh ahci 0000:00:09.0: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76100 irq 43 ata2: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76180 irq 43 ata3: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76200 irq 43 ata4: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76280 irq 43 ata5: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76300 irq 43 ata6: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76380 irq 43 usb 1-3: new high speed USB device using ehci_hcd and address 3 Initializing USB Mass Storage driver... scsi6 : usb-storage 1-3:1.3 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATA-8: ST31000528AS, CC3E, max UDMA/133 ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3.00: ATA-7: Maxtor 6L100M0, BACE1G10, max UDMA/100 ata3.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 31/32) ata4.00: configured for UDMA/133 ata1.00: ATAPI: ATAPI iHAS424 Y, ZL1U, max UDMA/100 ata3.00: configured for UDMA/100 ata1.00: configured for UDMA/100 scsi 0:0:0:0: CD-ROM ATAPI iHAS424 Y ZL1U PQ: 0 ANSI: 5 ata5.00: ATA-8: ST31000333AS, CC3H, max UDMA/133 ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: ATA-7: WDC WD1600AAJS-22PSA0, 05.06H05, max UDMA/133 ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) ata5.00: configured for UDMA/133 ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA WDC WD1600AAJS-2 05.0 PQ: 0 ANSI: 5 scsi 2:0:0:0: Direct-Access ATA Maxtor 6L100M0 BACE PQ: 0 ANSI: 5 scsi 3:0:0:0: Direct-Access ATA ST31000528AS CC3E PQ: 0 ANSI: 5 usb 2-5: new high speed USB device using ehci_hcd and address 3 scsi 4:0:0:0: Direct-Access ATA ST31000333AS CC3H PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 2:0:0:0: [sdb] 195371568 512-byte logical blocks: (100 GB/93.1 GiB) sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 3:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sdd] Write Protect is off sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdd: sdb:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sdc1 sdd1 sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb1 sdb2 sdb3 sd 3:0:0:0: [sdc] Attached SCSI disk sda: sd 4:0:0:0: [sdd] Attached SCSI disk sda1 sda2 sda3 sd 2:0:0:0: [sdb] Attached SCSI disk scsi7 : usb-storage 2-5:1.0 sd 1:0:0:0: [sda] Attached SCSI disk device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com usb 4-3: new low speed USB device using ohci_hcd and address 2 usb 3-1: new low speed USB device using ohci_hcd and address 2 scsi 6:0:0:0: Direct-Access HP Photosmart C4600 1.00 PQ: 0 ANSI: 5 sd 6:0:0:0: [sde] Attached SCSI removable disk EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 scsi 7:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 sd 7:0:0:0: [sdf] Attached SCSI removable disk scsi 7:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0 sd 7:0:0:1: [sdg] Attached SCSI removable disk scsi 7:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 sd 7:0:0:2: [sdh] Attached SCSI removable disk sd 7:0:0:3: [sdi] Attached SCSI removable disk rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs udev: starting version 161 loop: module loaded input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle sr 0:0:0:0: Attached scsi generic sg0 type 5 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 3:0:0:0: Attached scsi generic sg3 type 0 sd 4:0:0:0: Attached scsi generic sg4 type 0 sd 6:0:0:0: Attached scsi generic sg5 type 0 sd 7:0:0:0: Attached scsi generic sg6 type 0 sd 7:0:0:1: Attached scsi generic sg7 type 0 sd 7:0:0:2: Attached scsi generic sg8 type 0 sd 7:0:0:3: Attached scsi generic sg9 type 0 ACPI: WMI: Mapper loaded usbcore: registered new interface driver hiddev input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.0/input/input2 generic-usb 0003:046D:C044.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:04.0-3/input0 usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7411 usbcore: registered new interface driver usblp input: Microsoft Microsoft® Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/input/input3 generic-usb 0003:045E:00B0.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® Digital Media Pro Keyboard] on usb-0000:00:02.0-1/input0 input: Microsoft Microsoft® Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.1/input/input4 generic-usb 0003:045E:00B0.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Digital Media Pro Keyboard] on usb-0000:00:02.0-1/input1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver i2c i2c-0: nForce2 SMBus adapter at 0x2d00 ACPI: resource nForce2_smbus [io 0x2e00-0x2e3f] conflicts with ACPI region SM00 [io 0x2e00-0x2e3f 64bit pref disabled] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 forcedeth 0000:00:0a.0: setting latency timer to 64 EDAC MC: Ver: 2.1.0 Aug 14 2010 EDAC amd64_edac: Ver: 3.3.0 Aug 14 2010 forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 40:61:86:5b:b2:ac forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3 EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) amd64_edac: probe of 0000:00:18.2 failed with error -22 HDA Intel 0000:00:07.0: power state changed by ACPI to D0 HDA Intel 0000:00:07.0: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 hda_intel: Disable MSI for Nvidia chipset HDA Intel 0000:00:07.0: setting latency timer to 64 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 16 ICE1724 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 16 (level, low) -> IRQ 16 ice1724: No matching model found for ID 0xc31405a8 ice1724: Invalid EEPROM version 1 nvidia: module license 'NVIDIA' taints kernel. Disabling lock debugging due to kernel taint nvidia 0000:04:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 nvidia 0000:04:00.0: setting latency timer to 64 vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem NVRM: loading NVIDIA UNIX x86_64 Kernel Module 256.44 Thu Jul 29 01:22:44 PDT 2010 hda_codec: ALC889: BIOS auto-probing. EXT4-fs (dm-0): re-mounted. Opts: (null) EXT4-fs (dm-0): re-mounted. Opts: (null) EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): using internal journal EXT3-fs (sda1): mounted filesystem with writeback data mode Adding 2104508k swap on /dev/sda3. Priority:-1 extents:1 across:2104508k