Arch Linux

Damn, I submit the bug before complete explanation...

Here we go,

wodim burns CD-R but don't burn CD-RW, see the logs above:

[root@funkenote ~]# wodim -blank all -v dev=/dev/cdrw
TOC Type: 1 = CD-ROM
scsidev: '/dev/cdrw'
devname: '/dev/cdrw'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'TEAC '
Identification : 'DVD+-RW DVW28SLC'
Revision : 'A.06'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0002 (Removable disk)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM) (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
Drive buf size : 1267712 = 1238 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11745 (97:25/30)
ATIP start of lead out: 359848 (79:59/73)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D8
A2 values: 26 B2 4A
Disk type: Phase change
Manuf. index: 40
Manufacturer: INFODISC Technology Co., Ltd.
Speed set to 705 KB/s
wodim: Trying to use high speed medium on low speed writer.

Blank with brasero mysteriously works, then:

[root@funkenote ~]# wodim -v ~ricardofunke/Downloads/Linux/Debian/debian-504-amd64-netinst.iso dev=/dev/cdrw
wodim: No write mode specified.
wodim: Assuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
scsidev: '/dev/cdrw'
devname: '/dev/cdrw'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'TEAC '
Identification : 'DVD+-RW DVW28SLC'
Revision : 'A.06'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0002 (Removable disk)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
Drive buf size : 1267712 = 1238 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
FIFO size : 4194304 = 4096 KB
Track 01: data 131 MB
Total size: 150 MB (14:57.37) = 67303 sectors
Lout start: 151 MB (14:59/28) = 67303 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11745 (97:25/30)
ATIP start of lead out: 359848 (79:59/73)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D8
A2 values: 26 B2 4A
Disk type: Phase change
Manuf. index: 40
Manufacturer: INFODISC Technology Co., Ltd.
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 292545
Speed set to 705 KB/s
wodim: Trying to use high speed medium on low speed writer.
wodim: fifo had 64 puts and 0 gets.
wodim: fifo was 0 times empty and 1 times full, min fill was 0%.

Try to burn the same .iso with brasero. Don't work:

[root@funkenote ~]# cat /tmp/brasero-session.log
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1737)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_set_output_size_for_current_track
BraseroBurnURI stopping
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_session_output_size
BraseroBurnURI output set (IMAGE) image = /tmp/brasero_tmp_UNF7DV.bin toc = none
BraseroBurnURI called brasero_job_get_session_output_size
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_current_track
BraseroBurnURI no burn:// URI found
BraseroBurnURI stopping
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_set_output_size_for_current_track
BraseroLocalTrack stopping
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_session_output_size
BraseroLocalTrack output set (IMAGE) image = /tmp/brasero_tmp_ORG7DV.bin toc = none
BraseroLocalTrack called brasero_job_get_session_output_size
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_current_track
BraseroLocalTrack no remote URIs
BraseroLocalTrack stopping
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_flags
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_fd_in
BraseroChecksumImage called brasero_job_set_output_size_for_current_track
BraseroChecksumImage stopping
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage There is a checksum already 0
BraseroWodim called brasero_job_get_action
BraseroWodim getting varg
BraseroWodim called brasero_job_get_action
BraseroWodim got varg:
BraseroWodim deactivating
BraseroWodim called brasero_job_get_action
BraseroWodim getting varg
BraseroWodim called brasero_job_get_action
BraseroWodim called brasero_job_get_device
BraseroWodim called brasero_job_get_flags
BraseroWodim called brasero_job_get_speed
BraseroWodim called brasero_job_get_flags
BraseroWodim called brasero_job_get_input_type
BraseroWodim called brasero_job_get_fd_in
BraseroWodim called brasero_job_get_current_track
BraseroWodim called brasero_job_set_current_action
BraseroWodim got varg:
wodim
-v
dev=/dev/sr0
speed=4
driveropts=burnfree
fs=16m
-data
-nopad
/home/ricardofunke/Downloads/Linux/Debian/debian-504-amd64-netinst.iso
BraseroWodim Launching command
BraseroWodim called brasero_job_get_fd_out
BraseroWodim stderr: wodim: No write mode specified.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Assuming -tao mode.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Future versions of wodim may have different drive dependent defaults.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: scsidev: '/dev/sr0'
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: devname: '/dev/sr0'
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: scsibus: -2 target: -2 lun: -2
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Linux sg driver version: 3.5.27
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Wodim version: 1.1.10
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: SCSI buffer size: 64512
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: communication breaks or freezes immediately after that.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: TOC Type: 1 = CD-ROM
BraseroWodim stdout: Driveropts: 'burnfree'
BraseroWodim stdout: Device type : Removable CD-ROM
BraseroWodim stdout: Version : 5
BraseroWodim stdout: Response Format: 2
BraseroWodim stdout: Capabilit

My Driver

[root@funkenote ~]# wodim -scanbus
scsibus0:
0,0,0 0) 'TEAC ' 'DVD+-RW DVW28SLC' 'A.06' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *

I can burn the same .iso in the same CD-RW on the windows partition with Roxio.

Hello,

I still have this problem, it's also not working with cdrecord. It's possible to be related to hal or dbus?

orphan team

please check new cdrkit 1.1.11

Can you try using the libburnia libraries? I see brasero has an optional dependency on them, xfburn uses only those.
Cdrkit isnt developed, it never was. Its just maintained.