[root@researchlinux ~]# smartctl --all /dev/sda smartctl 5.39.1 2010-01-28 r3054 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar family Device Model: WDC WD800BB-08JHC0 Serial Number: WD-WMAM98380470 Firmware Version: 06.01C06 User Capacity: 80,032,038,912 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Fri Apr 9 14:48:26 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (2580) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 36) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 312 3 Spin_Up_Time 0x0003 166 156 021 Pre-fail Always - 2666 4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3207 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 12780 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1914 194 Temperature_Celsius 0x0022 099 076 000 Old_age Always - 44 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 3 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 3 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 3 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 2 SMART Error Log Version: 1 ATA Error Count: 1471 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1471 occurred at disk power-on lifetime: 12780 hours (532 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 07 6a 65 16 e8 Error: UNC 7 sectors at LBA = 0x0816656a = 135685482 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 69 65 16 08 58 00:04:19.330 READ DMA f8 00 00 00 00 00 00 58 00:04:19.330 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 00 58 00:04:19.325 IDENTIFY DEVICE ef 03 45 00 00 00 00 58 00:04:19.325 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 00 58 00:04:19.325 READ NATIVE MAX ADDRESS Error 1470 occurred at disk power-on lifetime: 12780 hours (532 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 07 6a 65 16 e8 Error: UNC 7 sectors at LBA = 0x0816656a = 135685482 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 69 65 16 08 58 00:04:16.965 READ DMA f8 00 00 00 00 00 00 58 00:04:16.965 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 00 58 00:04:16.960 IDENTIFY DEVICE ef 03 45 00 00 00 00 58 00:04:16.960 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 00 58 00:04:16.960 READ NATIVE MAX ADDRESS Error 1469 occurred at disk power-on lifetime: 12780 hours (532 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 07 6a 65 16 e8 Error: UNC 7 sectors at LBA = 0x0816656a = 135685482 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 69 65 16 08 58 00:04:14.150 READ DMA f8 00 00 00 00 00 00 58 00:04:14.150 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 00 58 00:04:14.145 IDENTIFY DEVICE ef 03 45 00 00 00 00 58 00:04:14.145 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 00 58 00:04:14.145 READ NATIVE MAX ADDRESS Error 1468 occurred at disk power-on lifetime: 12780 hours (532 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 07 6a 65 16 e8 Error: UNC 7 sectors at LBA = 0x0816656a = 135685482 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 69 65 16 08 58 00:04:11.775 READ DMA f8 00 00 00 00 00 00 58 00:04:11.775 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 00 58 00:04:11.770 IDENTIFY DEVICE ef 03 45 00 00 00 00 58 00:04:11.770 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 00 58 00:04:11.770 READ NATIVE MAX ADDRESS Error 1467 occurred at disk power-on lifetime: 12780 hours (532 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 07 6a 65 16 e8 Error: UNC 7 sectors at LBA = 0x0816656a = 135685482 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 69 65 16 08 58 00:04:09.855 READ DMA f8 00 00 00 00 00 00 58 00:04:09.855 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 00 58 00:04:09.850 IDENTIFY DEVICE ef 03 45 00 00 00 00 58 00:04:09.850 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 00 58 00:04:09.850 READ NATIVE MAX ADDRESS SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.