Linux version 2.6.32-ARCH (tobias@T-POWA-LX) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Tue Feb 23 19:43:46 CET 2010 Command line: root=/dev/disk/by-uuid/c22d690a-e816-4b0b-88cc-0c8c1b7666fb ro quiet splash KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable) BIOS-e820: 00000000bfed0000 - 00000000bfee0000 (ACPI data) BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) DMI present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0xbfed0 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 0BFF00000 mask FFFF00000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009f800 (usable) modified: 000000000009f800 - 00000000000a0000 (reserved) modified: 00000000000ce000 - 00000000000d0000 (reserved) modified: 00000000000dc000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000bfed0000 (usable) modified: 00000000bfed0000 - 00000000bfee0000 (ACPI data) modified: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) modified: 00000000bfee3000 - 00000000c0000000 (reserved) modified: 00000000e0000000 - 00000000f0000000 (reserved) modified: 00000000fec00000 - 00000000fec10000 (reserved) modified: 00000000fed00000 - 00000000fed00400 (reserved) modified: 00000000fed14000 - 00000000fed1a000 (reserved) modified: 00000000fed1c000 - 00000000fed90000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ff000000 - 0000000100000000 (reserved) initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bfed0000 0000000000 - 00bfe00000 page 2M 00bfe00000 - 00bfed0000 page 4k kernel direct mapping tables up to bfed0000 @ 10000-15000 RAMDISK: 37d09000 - 37fef3ae ACPI: RSDP 00000000000f8050 00024 (v02 PTLTD ) ACPI: XSDT 00000000bfed802a 00084 (v01 Sony VAIO 20071224 PTL 00000000) ACPI: FACP 00000000bfedfc04 000F4 (v03 Sony VAIO 20071224 PTL 00000001) ACPI: DSDT 00000000bfed91ac 069E4 (v02 Sony VAIO 20071224 PTL 20050624) ACPI: FACS 00000000bfee2fc0 00040 ACPI: APIC 00000000bfedfcf8 00068 (v01 Sony VAIO 20071224 PTL 0000005A) ACPI: HPET 00000000bfedfd60 00038 (v01 Sony VAIO 20071224 PTL 0000005A) ACPI: MCFG 00000000bfedfd98 0003C (v01 Sony VAIO 20071224 PTL 0000005A) ACPI: SLIC 00000000bfedfdd4 00176 (v01 Sony VAIO 20071224 PTL 01000000) ACPI: TMOR 00000000bfedff4a 00026 (v01 Sony VAIO 20071224 PTL 00000003) ACPI: APIC 00000000bfedff70 00068 (v01 Sony VAIO 20071224 PTL 00000000) ACPI: BOOT 00000000bfedffd8 00028 (v01 Sony VAIO 20071224 PTL 00000001) ACPI: SSDT 00000000bfed908f 0011D (v01 Sony VAIO 20071224 PTL 20050624) ACPI: SSDT 00000000bfed8696 00287 (v01 Sony VAIO 20071224 PTL 20050624) ACPI: SSDT 00000000bfed85e2 000B4 (v01 Sony VAIO 20071224 PTL 20050624) ACPI: SSDT 00000000bfed80ae 00534 (v01 Sony VAIO 20071224 PTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 00bfed0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 000169e898] TEXT DATA BSS ==> [0001000000 - 000169e898] #3 [0037d09000 - 0037fef3ae] RAMDISK ==> [0037d09000 - 0037fef3ae] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [000169f000 - 000169f204] BRK ==> [000169f000 - 000169f204] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] found SMP MP-table at [ffff8800000f8080] f8080 [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880001c00000-ffff8800045fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000bfed0 On node 0 totalpages: 786015 DMA zone: 56 pages used for memmap DMA zone: 102 pages reserved DMA zone: 3825 pages, LIFO batch:0 DMA32 zone: 10692 pages used for memmap DMA32 zone: 771340 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000 PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000 PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) Booting paravirtualized kernel on bare hardware NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88984 r8192 d21608 u1048576 pcpu-alloc: s88984 r8192 d21608 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 775165 Kernel command line: root=/dev/disk/by-uuid/c22d690a-e816-4b0b-88cc-0c8c1b7666fb ro quiet splash PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 3083932k/3144512k available (3315k kernel code, 452k absent, 59428k reserved, 1758k data, 472k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:768 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 2094.592 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.73 BogoMIPS (lpj=6981973) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 3072K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (8382.77 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc304800-0xfc304bff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc300000-0xfc303fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f] pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f] pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc304c00-0xfc304fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af] pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df] pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf] pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7] pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc304000-0xfc3047ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] pci 0000:00:01.0: bridge 32bit mmio: [0xcc000000-0xceffffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:02:00.0: reg 10 64bit mmio: [0xf6000000-0xf6003fff] pci 0000:02:00.0: reg 18 io port: [0x3000-0x30ff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff] pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff] pci 0000:06:00.0: reg 10 64bit mmio: [0xfa000000-0xfa001fff] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff] pci 0000:00:1c.2: bridge 32bit mmio: [0xfa000000-0xfbffffff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff] pci 0000:08:03.0: reg 10 32bit mmio: [0xfc004000-0xfc004fff] pci 0000:08:03.0: supports D1 D2 pci 0000:08:03.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:03.0: PME# disabled pci 0000:08:03.1: reg 10 32bit mmio: [0xfc006000-0xfc0067ff] pci 0000:08:03.1: reg 14 32bit mmio: [0xfc000000-0xfc003fff] pci 0000:08:03.1: supports D1 D2 pci 0000:08:03.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:03.1: PME# disabled pci 0000:08:03.2: reg 10 32bit mmio: [0xfc005000-0xfc005fff] pci 0000:08:03.2: supports D1 D2 pci 0000:08:03.2: PME# supported from D0 D1 D2 D3hot pci 0000:08:03.2: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xfc000000-0xfc0fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xe0000000-0xefffffff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved system 00:06: ioport range 0x680-0x69f has been reserved system 00:06: ioport range 0x800-0x80f has been reserved system 00:06: ioport range 0x1000-0x107f has been reserved system 00:06: ioport range 0x1180-0x11bf has been reserved system 00:06: ioport range 0x1640-0x164f has been reserved system 00:06: ioport range 0xfe00-0xfe7f has been reserved system 00:06: ioport range 0xfe80-0xfeff has been reserved pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x2000-0x2fff pci 0000:00:01.0: MEM window: 0xcc000000-0xceffffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x3000-0x3fff pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.1: IO window: 0x4000-0x4fff pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06 pci 0000:00:1c.2: IO window: 0x5000-0x5fff pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff pci 0000:08:03.0: CardBus bridge, secondary bus 0000:09 pci 0000:08:03.0: IO window: 0x006000-0x0060ff pci 0000:08:03.0: IO window: 0x006400-0x0064ff pci 0000:08:03.0: PREFETCH window: 0xc0000000-0xc3ffffff pci 0000:08:03.0: MEM window: 0xc8000000-0xcbffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 pci 0000:00:1e.0: IO window: 0x6000-0x6fff pci 0000:00:1e.0: MEM window: 0xfc000000-0xfc0fffff pci 0000:00:1e.0: PREFETCH window: 0xc0000000-0xc3ffffff pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:08:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] pci_bus 0000:01: resource 1 mem: [0xcc000000-0xceffffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff] pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff] pci_bus 0000:06: resource 0 io: [0x5000-0x5fff] pci_bus 0000:06: resource 1 mem: [0xfa000000-0xfbffffff] pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf5ffffff] pci_bus 0000:08: resource 0 io: [0x6000-0x6fff] pci_bus 0000:08: resource 1 mem: [0xfc000000-0xfc0fffff] pci_bus 0000:08: resource 2 pref mem [0xc0000000-0xc3ffffff] pci_bus 0000:08: resource 3 io: [0x00-0xffff] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:09: resource 0 io: [0x6000-0x60ff] pci_bus 0000:09: resource 1 io: [0x6400-0x64ff] pci_bus 0000:09: resource 2 pref mem [0xc0000000-0xc3ffffff] pci_bus 0000:09: resource 3 mem: [0xc8000000-0xcbffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device Unpacking initramfs... Freeing initrd memory: 2968k freed Simple Boot Flag at 0x36 set to 0x1 Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1268390448.316:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 6030 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: irq 24 for MSI/MSI-X pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 472k freed input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] [drm] Initialized drm 1.1.0 20060810 nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nouveau 0000:01:00.0: setting latency timer to 64 [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5 [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086600a2) [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [drm] nouveau 0000:01:00.0: ... appears to be valid [drm] nouveau 0000:01:00.0: BIT BIOS found [drm] nouveau 0000:01:00.0: Bios version 60.86.52.00 [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 010003f3 00000035 [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028 [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 0000000e 00000000 [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2 [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff [drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07 [drm] nouveau 0000:01:00.0: 3: 0x00000310: type 0x10 idx 3 tag 0xff [drm] nouveau 0000:01:00.0: 4: 0x00000311: type 0x11 idx 4 tag 0xff [drm] nouveau 0000:01:00.0: 5: 0x00000313: type 0x13 idx 5 tag 0xff [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC541 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC8B8 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD30D [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD3FF input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD5F9 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD65E [drm] nouveau 0000:01:00.0: 0xD65E: Condition still not met after 20ms, skipping following opcodes [drm] nouveau 0000:01:00.0: 0xB5AA: parsing output script 0 [drm] nouveau 0000:01:00.0: BIOS FP mode: 1280x800 (69420kHz pixel clock) [TTM] Zone kernel: Available graphics memory: 1544038 kiB. [drm] nouveau 0000:01:00.0: 128 MiB VRAM [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [drm] nouveau 0000:01:00.0: Detected a LVDS output [drm] nouveau 0000:01:00.0: Detected a DAC output [drm] nouveau 0000:01:00.0: Detected a LVDS connector [drm] nouveau 0000:01:00.0: Detected a VGA connector [drm] nouveau 0000:01:00.0: Detected a HDMI connector [drm] nouveau 0000:01:00.0: no encoders, ignoring [drm] nouveau 0000:01:00.0: Detected a TV connector [drm] nouveau 0000:01:00.0: no encoders, ignoring [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x40250000, bo ffff8800be44b800 [drm] LVDS-7: set mode 1280x800 14 [drm] nouveau 0000:01:00.0: 0xB5AE: parsing output script 1 [drm] nouveau 0000:01:00.0: 0xB3EB: parsing clock script 0 Console: switching to colour frame buffer device 160x50 fb0: nouveaufb frame buffer device registered panic notifier [drm] Initialized nouveau 0.0.16 340e29c2491b308f3 for 0000:01:00.0 on minor 0 [drm] nouveau 0000:01:00.0: 0xB56D: parsing clock script 1 SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 28 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xfc304000 port 0xfc304100 irq 28 ata2: DUMMY ata3: DUMMY pata_acpi 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pata_acpi 0000:00:1f.1: setting latency timer to 64 pata_acpi 0000:00:1f.1: PCI INT A disabled ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ATA-8: WDC WD2500BEVT-22ZCT0, 11.01A11, max UDMA/133 ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-2 11.0 PQ: 0 ANSI: 5 ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15 sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk ata4.00: ATAPI: Optiarc DVD RW AD-7560A, DS06, max UDMA/33 ata4.00: configured for UDMA/33 scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7560A DS06 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 EXT4-fs (sda2): mounted filesystem with ordered data mode rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs udev: starting version 151 ACPI: AC Adapter [ADP1] (on-line) ACPI: SSDT 00000000bfed8d0a 002A1 (v01 Sony VAIO 20071224 PTL 20050624) ACPI: SSDT 00000000bfed891d 0035B (v01 Sony VAIO 20071224 PTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state ACPI: Battery Slot [BAT0] (battery present) sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 3:0:0:0: Attached scsi generic sg1 type 5 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle processor LNXCPU:00: registered as cooling_device0 input: PC Speaker as /devices/platform/pcspkr/input/input4 usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc304800 Switching to clocksource hpet ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc304c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected cfg80211: Calling CRDA to update world regulatory domain uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input5 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input6 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 sky2 driver version 1.25 sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sky2 0000:02:00.0: setting latency timer to 64 sky2 0000:02:00.0: Yukon-2 FE chip revision 3 sky2 0000:02:00.0: irq 29 for MSI/MSI-X sky2 eth0: addr 00:1a:80:b3:84:8c ACPI: SSDT 00000000bfed8fab 000E4 (v01 Sony VAIO 20071224 PTL 20050624) ACPI: SSDT 00000000bfed8c78 00092 (v01 Sony VAIO 20071224 PTL 20050624) ACPI: Invalid active0 threshold thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (55 C) ACPI: Invalid active0 threshold thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZ01] (55 C) processor LNXCPU:01: registered as cooling_device1 iTCO_vendor_support: vendor-support=0 sony-laptop: Sony Notebook Control Driver v0.6. tifm_7xx1 0000:08:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 firewire_ohci 0000:08:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/SNY5001:00/input/input7 input: Sony Vaio Jogdial as /devices/virtual/input/input8 tifm_core: MMC/SD card detected in socket 0:1 firewire_ohci: Added fw-ohci device 0000:08:03.1, OHCI version 1.10 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) yenta_cardbus 0000:08:03.0: CardBus bridge found [104d:902d] yenta_cardbus 0000:08:03.0: Using CSCINT to route CSC interrupts to PCI yenta_cardbus 0000:08:03.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:08:03.0: TI: mfunc 0x01121b22, devctl 0x64 usb 5-1: new full speed USB device using uhci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice pci_hotplug: PCI Hot Plug PCI Core version: 0.5 iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:06:00.0: setting latency timer to 64 iwlagn 0000:06:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 yenta_cardbus 0000:08:03.0: ISA IRQ mask 0x0cf8, PCI irq 16 yenta_cardbus 0000:08:03.0: Socket status: 30000006 pci_bus 0000:08: Raising subordinate bus# of parent bus (#08) from #09 to #0c yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge Memory window: 0xfc000000 - 0xfc0fffff yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge Memory window: 0xc0000000 - 0xc3ffffff iwlagn 0000:06:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels iwlagn 0000:06:00.0: irq 30 for MSI/MSI-X usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1094 usbcore: registered new interface driver usblp usb 5-2: new low speed USB device using uhci_hcd and address 3 firewire_core: created device fw0: GUID 0800460302a12389, S400 usb 5-2: configuration #1 chosen from 1 choice phy0: Selected rate control algorithm 'iwl-agn-rs' shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 usbcore: registered new interface driver hiddev input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input10 generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.0-2/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver st: Version 20081215, fixed bufsize 32768, s/g segs 256 fuse init (API version 7.13) Adding 1076344k swap on /dev/sda3. Priority:-1 extents:1 across:1076344k sky2 eth0: enabling interface iwlagn 0000:06:00.0: firmware: requesting iwlwifi-4965-2.ucode iwlagn 0000:06:00.0: loaded firmware version 228.61.2.24 Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX [drm] nouveau 0000:01:00.0: Allocating FIFO number 2 [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2 [drm] LVDS-7: set mode 640x480 16 nvclock:1880 freeing invalid memtype ce000000-ce010000 nvclock:1880 freeing invalid memtype ce010000-ce030000 wlan0: deauthenticating from 00:21:63:d3:7d:a7 by local choice (reason=3) wlan0: direct probe to AP 00:21:63:d3:7d:a7 (try 1) wlan0: direct probe responded wlan0: authenticate with AP 00:21:63:d3:7d:a7 (try 1) wlan0: authenticated wlan0: associate with AP 00:21:63:d3:7d:a7 (try 1) wlan0: RX AssocResp from 00:21:63:d3:7d:a7 (capab=0x411 status=0 aid=1) wlan0: associated Intel AES-NI instructions are not detected. padlock: VIA PadLock not detected. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready wlan0: no IPv6 routers present