Description:

First off, I'm from Sweden so my English my be a little off, sorry for that!

When Xorg-server was upgraded to Xorg-server xorg-server-1.7.1.901-2 I lost the ability to use the cursor on both monitors in my dualscreen setup. The primary monitor works just fine. But when I drag the cursor over to the secondary screen htop shows that one core goes to 100%. If i quickly drag the mouse back to the primary monitor the system often starts to respond again, and the cpu goes back into the normal procentage. If I don't drag the cursor back quickly enough then the system will become inresponable. Problebly just the Xorg-server. I can still use ssh to acess the system. However, I can not kill the Xorg-server. That might be user related though. Other times when I try to move the cursor over to the secondary monitor, the cursor flys over to the other side of the primary monitor. If I click on the left mouse button (I'm right handed) realy fast at the same time I'm moving the cursor over to the secondary monitor. The cursor starts blinking on the secondary monitor when pressing button. Yet again, if I don't drag the cursor back to the primary monitor, the system will do the same as before, become inresponsible.

The second monitor works in any other way.

I belive that it is the Xorg-server that's broken, I could however be wrong. I have updated but haven't rebooted my system in 14 days and therefore it could have been some other package that's broken. Everyting points towards the Xorg-server.

I'm using the Nvidia 190.42 driver together with xorg-server-1.7.1.901-2 on the 2.6.31-ARCH kernel. I'm using Openbox.


My system (relvant parts):
AMD X2 4200+
Asus A8N-SLI Premium
Gainward Nvidia 7800GTX Golden Sample
Logitech MX510 (Might show up in Xorg.0.log)
Logitech UltraFlat X (Might show up in Xorg.0.log)


My /etc/X11/xorg.conf
-----------------------------------------------
Section "Monitor"
Identifier "Monitor0"
VendorName "BENQ"
ModelName "G2200W"
HorizSync 31.0 - 83.0
VertRefresh 55.0 - 76.0
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "BENQ"
ModelName "G2200W"
HorizSync 31.0 - 83.0
VertRefresh 55.0 - 76.0
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
Option "AddARGBGLXVisuals" "True"
DefaultDepth 24
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT-0: nvidia-auto-select +0+0"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "CRT-1: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "InputDevice"
Identifier "Logitech HID compliant keyboard"
# Identifier "UltraFlatX"
Driver "evdev"
Option "Device" "/dev/input/by-path/pci-0000:00:02.1-usb-0:1.2.2:1.0-event-kbd"
# Xkblayout "se"
# Option "xkb_rules" "evdev"
Option "xkb_rules" "xorg"
# Option "xkb_model" "evdev"
# Option "xkb_layout" "se"
# Option "xkb_layout" "sv-latin1"
Option "XkbLayout" "se"
EndSection

Section "InputDevice"
Identifier "Logitech USB-PS/2 Optical Mouse"
# Identifier "MX510"
Driver "evdev"
Option "CorePointer"
# Option "Device" "/dev/input/mice"
Option "Device" "/dev/input/by-id/usb-Logitech_USB-PS_2_Optical_Mouse-mouse"
Option "Protocol" "ImPS/2"
Option "Buttons" "10"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection


Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
# Load "freetype"
Load "glx"
EndSection

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 1680 0
Screen 1 "Screen1" LeftOf "Screen0"
InputDevice "Logitech HID compliant keyboard" "CoreKeyboard"
InputDevice "Logitech USB-PS/2 Optical Mouse" "CorePointer"
Option "AllowEmptyInput" "false"
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection

Section "Device"
Identifier "Device0"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7800 GTX"
BusID "PCI:1:0:0"
Screen 0
Driver "nvidia"
Option "NoLogo" "True"
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "True"
Option "DisableGLXRootClipping" "True"
Option "AddARGBGLXVisuals" "True"
# Option "AGPFastWrite" "true"
# Option "EnablePageFlip" "true"
EndSection

Section "Device"
Identifier "Device1"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7800 GTX"
BusID "PCI:1:0:0"
Screen 1
Driver "nvidia"
Option "NoLogo" "True"
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "True"
Option "DisableGLXRootClipping" "True"
Option "AddARGBGLXVisuals" "True"
# Option "AGPFastWrite" "true"
# Option "EnablePageFlip" "true"
EndSection

Section "ServerFlags"
Option "Xinerama" "1"
Option "DontZap" "false"
Option "AutoAddDevices" "True"
EndSection
-----------------------------------------------

My /var/log/Xorg.0.log
-----------------------------------------------
X.Org X Server 1.7.1.901 (1.7.2 RC 1)
Release Date: 2009-11-6
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH i686
Current Operating System: Linux Linnea 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/06ad0ee5-2b79-4f17-966d-eb4436025e9b ro
Build Date: 08 November 2009 04:12:47PM

Current version of pixman: 0.16.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 13 10:59:13 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Device1"
(**) |-->Input Device "Logitech HID compliant keyboard"
(**) |-->Input Device "Logitech USB-PS/2 Optical Mouse"
(**) Option "DontZap" "false"
(**) Option "Xinerama" "1"
(**) Option "AllowEmptyInput" "false"
(**) Option "AutoAddDevices" "True"
(**) Automatically adding devices
(==) Automatically enabling devices
(**) Xinerama: enabled
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Loader magic: 0x81e5d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 10de:0091:10b0:0a01 nVidia Corporation G70 [GeForce 7800 GTX] rev 161, Mem @ 0xd0000000/16777216, 0xc0000000/268435456, 0xd1000000/16777216, I/O @ 0x0000a000/128, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 190.42 Tue Oct 20 20:55:08 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 2.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) NVIDIA dlloader X Driver 190.42 Tue Oct 20 20:26:00 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "RenderAccel" "true"
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "CRT-0: nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "AllowGLXWithComposite" "True"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Option "DisableGLXRootClipping" "True"
(**) Nov 13 10:59:14 NVIDIA(0): Enabling RENDER acceleration
(II) Nov 13 10:59:14 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Nov 13 10:59:14 NVIDIA(0): enabled.
(II) Nov 13 10:59:15 NVIDIA(0): NVIDIA GPU GeForce 7800 GTX (G70) at PCI:1:0:0 (GPU-0)
(--) Nov 13 10:59:15 NVIDIA(0): Memory: 262144 kBytes
(--) Nov 13 10:59:15 NVIDIA(0): VideoBIOS: 05.70.02.11.24
(II) Nov 13 10:59:15 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Nov 13 10:59:15 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Nov 13 10:59:15 NVIDIA(0): Connected display device(s) on GeForce 7800 GTX at PCI:1:0:0:
(--) Nov 13 10:59:15 NVIDIA(0): NVIDIA TV Encoder (TV-0)
(--) Nov 13 10:59:15 NVIDIA(0): BENQ G2200W (DFP-0)
(--) Nov 13 10:59:15 NVIDIA(0): BENQ G2200W (DFP-1)
(--) Nov 13 10:59:15 NVIDIA(0): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock
(--) Nov 13 10:59:15 NVIDIA(0): TV encoder: NVIDIA
(II) Nov 13 10:59:15 NVIDIA(0): Assigned Display Device: DFP-0
(II) Nov 13 10:59:15 NVIDIA(0): Validated modes:
(II) Nov 13 10:59:15 NVIDIA(0): "CRT-0:nvidia-auto-select+0+0"
(II) Nov 13 10:59:15 NVIDIA(0): Virtual screen size determined to be 1680 x 1050
(--) Nov 13 10:59:15 NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
(--) Nov 13 10:59:15 NVIDIA(0): option
(**) Nov 13 10:59:15 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(1): RGB weight 888
(==) NVIDIA(1): Default visual is TrueColor
(==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(1): Option "NoLogo" "True"
(**) NVIDIA(1): Option "RenderAccel" "true"
(**) NVIDIA(1): Option "TwinView" "0"
(**) NVIDIA(1): Option "MetaModes" "CRT-1: nvidia-auto-select +0+0"
(**) NVIDIA(1): Option "AllowGLXWithComposite" "True"
(**) NVIDIA(1): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(1): Option "DisableGLXRootClipping" "True"
(**) Nov 13 10:59:15 NVIDIA(1): Enabling RENDER acceleration
(II) Nov 13 10:59:15 NVIDIA(1): NVIDIA GPU GeForce 7800 GTX (G70) at PCI:1:0:0 (GPU-0)
(--) Nov 13 10:59:15 NVIDIA(1): Memory: 262144 kBytes
(--) Nov 13 10:59:15 NVIDIA(1): VideoBIOS: 05.70.02.11.24
(II) Nov 13 10:59:15 NVIDIA(1): Detected PCI Express Link width: 16X
(--) Nov 13 10:59:15 NVIDIA(1): Interlaced video modes are supported on this GPU
(--) Nov 13 10:59:15 NVIDIA(1): Connected display device(s) on GeForce 7800 GTX at PCI:1:0:0:
(--) Nov 13 10:59:15 NVIDIA(1): NVIDIA TV Encoder (TV-0)
(--) Nov 13 10:59:15 NVIDIA(1): BENQ G2200W (DFP-0)
(--) Nov 13 10:59:15 NVIDIA(1): BENQ G2200W (DFP-1)
(--) Nov 13 10:59:15 NVIDIA(1): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock
(--) Nov 13 10:59:15 NVIDIA(1): TV encoder: NVIDIA
(II) Nov 13 10:59:15 NVIDIA(1): Assigned Display Device: DFP-1
(II) Nov 13 10:59:15 NVIDIA(1): Validated modes:
(II) Nov 13 10:59:15 NVIDIA(1): "CRT-1:nvidia-auto-select+0+0"
(II) Nov 13 10:59:15 NVIDIA(1): Virtual screen size determined to be 1680 x 1050
(--) Nov 13 10:59:15 NVIDIA(1): DPI set to (90, 88); computed from "UseEdidDpi" X config
(--) Nov 13 10:59:15 NVIDIA(1): option
(**) Nov 13 10:59:15 NVIDIA(1): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Nov 13 10:59:15 NVIDIA(0): Initialized GPU GART.
(II) Nov 13 10:59:15 NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select+0+0"
(II) Loading extension NV-GLX
(II) Nov 13 10:59:15 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Nov 13 10:59:15 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(==) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Nov 13 10:59:15 NVIDIA(1): Initialized GPU GART.
(II) Nov 13 10:59:15 NVIDIA(1): Setting mode "CRT-1:nvidia-auto-select+0+0"
(II) Nov 13 10:59:16 NVIDIA(1): Initialized OpenGL Acceleration
(==) NVIDIA(1): Disabling shared memory pixmaps
(II) Nov 13 10:59:16 NVIDIA(1): Initialized X Rendering Acceleration
(==) NVIDIA(1): Backing store disabled
(==) NVIDIA(1): Silken mouse enabled
(==) NVIDIA(1): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(**) Option "CoreKeyboard"
(**) Logitech HID compliant keyboard: always reports core events
(**) Logitech HID compliant keyboard: Device: "/dev/input/by-path/pci-0000:00:02.1-usb-0:1.2.2:1.0-event-kbd"
(EE) Unable to open evdev device "/dev/input/by-path/pci-0000:00:02.1-usb-0:1.2.2:1.0-event-kbd".
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for "Logitech HID compliant keyboard"
(**) Option "CorePointer"
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/by-id/usb-Logitech_USB-PS_2_Optical_Mouse-mouse"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for "Logitech USB-PS/2 Optical Mouse"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event6"
(II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Found relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) config/hal: Adding input device Logitech HID compliant keyboard
(**) Logitech HID compliant keyboard: always reports core events
(**) Logitech HID compliant keyboard: Device: "/dev/input/event5"
(II) Logitech HID compliant keyboard: Found 20 mouse buttons
(II) Logitech HID compliant keyboard: Found keys
(II) Logitech HID compliant keyboard: Configuring as mouse
(II) Logitech HID compliant keyboard: Configuring as keyboard
(**) Logitech HID compliant keyboard: YAxisMapping: buttons 4 and 5
(**) Logitech HID compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech HID compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Logitech HID compliant keyboard
(**) Logitech HID compliant keyboard: always reports core events
(**) Logitech HID compliant keyboard: Device: "/dev/input/event4"
(II) Logitech HID compliant keyboard: Found keys
(II) Logitech HID compliant keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech HID compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
-----------------------------------------------

My /etc/rc.conf
-----------------------------------------------
#
# /etc/rc.conf - Main Configuration for Arch Linux
#

# -----------------------------------------------------------------------
# LOCALIZATION
# -----------------------------------------------------------------------
#
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
#
LOCALE="sv_SE.utf8"
HARDWARECLOCK="local"
USEDIRECTISA="no"
TIMEZONE="Europe/Stockholm"
KEYMAP="sv-latin1"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"

# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
#
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
#
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
#
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(vboxdrv vboxnetflt)

# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"

# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
#
HOSTNAME="Linnea"

# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
#
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
#
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#
#eth0="dhcp"
eth1="dhcp"
#eth2="dhcp"
INTERFACES=(eth1)

# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
#
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)

# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network.d
#
# This now requires the netcfg package
#
#NETWORKS=(main)

# -----------------------------------------------------------------------
# DAEMONS
# -----------------------------------------------------------------------
#
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
#
DAEMONS=(syslog-ng @network @sshd @samba @netfs @crond @alsa hal @fam kdm @portmap @nfslock @nfsd @vmware @nfs-common @nfs-server)
-----------------------------------------------


Steps to reproduce:
Drag the cursor over to the secondary monitor