Linux version 2.6.30-ARCH (root@LX-Laptop) (gcc version 4.4.0 20090526 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jun 19 21:25:17 UTC 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable) BIOS-e820: 000000007f6d0000 - 000000007f6e3000 (ACPI NVS) BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x7f6d0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07F700000 mask FFFF00000 uncachable 2 base 07F800000 mask FFF800000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000002000 (usable) modified: 0000000000002000 - 0000000000006000 (reserved) modified: 0000000000006000 - 000000000009f800 (usable) modified: 000000000009f800 - 00000000000a0000 (reserved) modified: 00000000000dc000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000007f6d0000 (usable) modified: 000000007f6d0000 - 000000007f6e3000 (ACPI NVS) modified: 000000007f6e3000 - 0000000080000000 (reserved) modified: 00000000e0000000 - 00000000f0000000 (reserved) modified: 00000000fec00000 - 00000000fec10000 (reserved) modified: 00000000fed00000 - 00000000fed00400 (reserved) modified: 00000000fed14000 - 00000000fed1a000 (reserved) modified: 00000000fed1c000 - 00000000fed90000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ff000000 - 0000000100000000 (reserved) init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 RAMDISK: 37f45000 - 37fefb39 Allocated new RAMDISK: 0062a000 - 006d4b39 Move RAMDISK from 0000000037f45000 - 0000000037fefb38 to 0062a000 - 006d4b38 ACPI: RSDP 000f7700 00024 (v02 TOSQCI) ACPI: XSDT 7f6d2dca 00074 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000) ACPI: FACP 7f6dfc92 000F4 (v03 T0SQCI TOSQCI00 06040000 ALAN 00000001) ACPI: DSDT 7f6d4210 0BA0E (v02 TOSQCI N.Jersey 06040000 MSFT 03000001) ACPI: FACS 7f6e2fc0 00040 ACPI: HPET 7f6dfd86 00038 (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A) ACPI: MCFG 7f6dfdbe 0003C (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A) ACPI: APIC 7f6dfdfa 00068 (v01 PTLTD APIC 06040000 LTP 00000000) ACPI: BOOT 7f6dfe62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: SLIC 7f6dfe8a 00176 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000) ACPI: SSDT 7f6d3f63 002AD (v01 SataRe SataAhci 00001000 INTL 20061109) ACPI: SSDT 7f6d33ca 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20061109) ACPI: SSDT 7f6d3324 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20061109) ACPI: SSDT 7f6d2e3e 004E6 (v01 PmRef CpuPm 00003000 INTL 20061109) ACPI: Local APIC address 0xfee00000 1150MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00008000 - 0000ef00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 0000626e44] TEXT DATA BSS ==> [0000100000 - 0000626e44] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [0000627000 - 0000629194] BRK ==> [0000627000 - 0000629194] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [000062a000 - 00006d4b39] NEW RAMDISK ==> [000062a000 - 00006d4b39] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] found SMP MP-table at [c00f77b0] f77b0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0007f6d0 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x00000002 0: 0x00000006 -> 0x0000009f 0: 0x00000100 -> 0x0007f6d0 On node 0 totalpages: 521835 free_area_init_node: node 0, pgdat c04c2380, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3963 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 2302 pages used for memmap HighMem zone: 292308 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000002000 - 0000000000006000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 11 pages at c1ffa000, static data 24444 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517757 Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sda1 ro resume=/dev/sda6 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 NR_IRQS:512 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1829.004 MHz processor. Console: colour EGA 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing HighMem for node 0 (000377fe:0007f6d0) Memory: 2063244k/2087744k available (2902k kernel code, 23248k reserved, 1051k data, 392k init, 1178440k highmem) virtual kernel memory layout: fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc04e3000 - 0xc0545000 ( 392 kB) .data : 0xc03d599f - 0xc04dc6a8 (1051 kB) .text : 0xc0100000 - 0xc03d599f (2902 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 3659.42 BogoMIPS (lpj=6096680) Security Framework initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20090320 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3658.89 BogoMIPS (lpj=6095825) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (7318.31 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 1056 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: missing confirmations, switch off interrupt mode. ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: No dock devices found. ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014468), AE_NOT_FOUND ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xf0000000-0xf00fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] pci 0000:00:02.1: reg 10 64bit mmio: [0xf0100000-0xf01fffff] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf0704800-0xf0704bff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0500000-0xf0503fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0704c00-0xf0704fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0200 (mask 0013) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007) pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] pci 0000:00:1f.2: reg 10 io port: [0x1c00-0x1c07] pci 0000:00:1f.2: reg 14 io port: [0x18d4-0x18d7] pci 0000:00:1f.2: reg 18 io port: [0x18d8-0x18df] pci 0000:00:1f.2: reg 1c io port: [0x18d0-0x18d3] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0704000-0xf07047ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f] pci 0000:02:00.0: reg 10 32bit mmio: [0xf0300000-0xf0300fff] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.0: bridge 32bit mmio: [0xf0300000-0xf03fffff] pci 0000:03:00.0: reg 10 64bit mmio: [0xf0200000-0xf0203fff] pci 0000:03:00.0: reg 18 io port: [0x2000-0x20ff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0200000-0xf02fffff] pci 0000:0a:01.0: reg 10 32bit mmio: [0xf0400000-0xf0400fff] pci 0000:0a:01.0: reg 14 32bit mmio: [0xf0402000-0xf04027ff] pci 0000:0a:01.0: supports D1 D2 pci 0000:0a:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0a:01.0: PME# disabled pci 0000:0a:01.2: reg 10 32bit mmio: [0xf0402800-0xf04028ff] pci 0000:0a:01.2: supports D1 D2 pci 0000:0a:01.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0a:01.2: PME# disabled pci 0000:0a:01.3: reg 10 32bit mmio: [0xf0401000-0xf0401fff] pci 0000:0a:01.3: supports D1 D2 pci 0000:0a:01.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0a:01.3: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xf0400000-0xf04fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7014468), AE_NOT_FOUND ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xe0000000-0xefffffff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:01: iomem range 0xff80000-0xff8ffff could not be reserved system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved system 00:05: ioport range 0x800-0x80f has been reserved system 00:05: ioport range 0x1000-0x107f has been reserved system 00:05: ioport range 0x1180-0x11bf has been reserved system 00:05: ioport range 0xfe00-0xfe00 has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0xf0300000-0xf03fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: 0x2000-0x2fff pci 0000:00:1c.1: MEM window: 0xf0200000-0xf02fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: disabled pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0xf0400000-0xf04fffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:02: resource 1 mem: [0xf0300000-0xf03fffff] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff] pci_bus 0000:03: resource 1 mem: [0xf0200000-0xf02fffff] pci_bus 0000:0a: resource 1 mem: [0xf0400000-0xf04fffff] pci_bus 0000:0a: resource 3 io: [0x00-0xffff] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 682k freed Simple Boot Flag at 0x36 set to 0x1 apm: BIOS not found. Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1245840857.180:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1731 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.3: setting latency timer to 64 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 392k freed SCSI subsystem initialized libata version 3.00 loaded. pata_acpi 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pata_acpi 0000:00:1f.1: setting latency timer to 64 pata_acpi 0000:00:1f.1: PCI INT A disabled ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 27 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi2 : ahci scsi3 : ahci scsi4 : ahci ata3: SATA max UDMA/133 abar m2048@0xf0704000 port 0xf0704100 irq 27 ata4: SATA max UDMA/133 abar m2048@0xf0704000 port 0xf0704180 irq 27 ata5: SATA max UDMA/133 abar m2048@0xf0704000 port 0xf0704200 irq 27 ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JT03, max UDMA/33 ata1.00: configured for UDMA/33 scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T40N JT03 PQ: 0 ANSI: 5 ata2: port disabled. ignoring. ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ACPI Warning (nspredef-0943): \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer [20090320] ata3.00: _GTF unexpected object type 0x1 ata3.00: ATA-8: TOSHIBA MK2546GSX, LB013M, max UDMA/100 ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3.00: _GTF unexpected object type 0x1 ata3.00: configured for UDMA/100 scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK2546GS LB01 PQ: 0 ANSI: 5 Driver 'sr' needs updating - please use bus_type methods Driver 'sd' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 2:0:0:0: [sda] Attached SCSI disk PM: Starting manual resume from disk EXT4-fs: barriers enabled EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem sda1 with ordered data mode kjournald2 starting: pid 573, dev sda1:8, commit interval 5 seconds rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs udev: starting version 141 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input2 input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input3 input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input4 ACPI: SSDT 7f6d3ca5 001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) ACPI: SSDT 7f6d3629 005F7 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320] Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7f6d3e9b 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20061109) ACPI: SSDT 7f6d3c20 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20061109) ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) omnibook: Driver version 2.20070211-trunk. omnibook: Forced load with EC type 12. omnibook: Begin table match of ac feature. omnibook: Returning table entry nr 0. omnibook: Begin table match of battery feature. omnibook: Returning table entry nr 0. omnibook: Begin table match of blank feature. omnibook: Try to init cdimode omnibook: Saved state of PCI register: [40069]. omnibook: check_default_state timeout. omnibook: EC state check failure, please report. omnibook: Backend compal init failed, skipping entry. omnibook: Returning table entry nr 1. omnibook: LCD backlight turn off at console blanking is enabled. omnibook: Begin table match of bluetooth feature. omnibook: Try to init ACPI backend omnibook: ACPI EC device found input: Omnibook ACPI scancode generator as /devices/virtual/input/input5 omnibook: hook_connect for device AT Translated Set 2 keyboard. omnibook: Enabling Toshiba Bluetooth ACPI device. omnibook: ACPI backend init OK omnibook: Returning table entry nr 0. omnibook: BTST raw_state: c1 omnibook: Begin table match of cooling feature. omnibook: CDI backend init already failed, skipping. omnibook: Backend compal init failed, skipping entry. omnibook: Match failed: disabling cooling. omnibook: Begin table match of display feature. omnibook: ACPI backend has already been initialized omnibook: Returning table entry nr 0. omnibook: Init function of display failed with error -19. omnibook: Trying to dispose ACPI backend omnibook: Begin table match of hotkeys feature. omnibook: CDI backend init already failed, skipping. omnibook: Backend compal init failed, skipping entry. omnibook: Match failed: disabling hotkeys. omnibook: dmi feature has no backend table, io_op not initialized. omnibook: version feature has no backend table, io_op not initialized. omnibook: Begin table match of lcd feature. omnibook: CDI backend init already failed, skipping. omnibook: Backend compal init failed, skipping entry. omnibook: Returning table entry nr 2. omnibook: Begin table match of temperature feature. omnibook: Returning table entry nr 0. omnibook: Begin table match of touchpad feature. omnibook: CDI backend init already failed, skipping. omnibook: Backend compal init failed, skipping entry. omnibook: Match failed: disabling touchpad. omnibook: Begin table match of wifi feature. omnibook: ACPI backend has already been initialized omnibook: Returning table entry nr 0. Clocksource tsc unstable (delta = -340850045 ns) omnibook: BTST raw_state: c1 omnibook: Begin table match of throttling feature. omnibook: ACPI backend has already been initialized omnibook: Returning table entry nr 0. omnibook: Enabled features: ac battery blank bluetooth dmi version lcd temperature wifi throttling. ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 ACPI: Power Button [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8 ACPI: Power Button [PWRB] thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (49 C) Linux agpgart interface v0.103 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ACPI: WMI: Mapper loaded usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0704800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 sr 0:0:0:0: Attached scsi generic sg0 type 5 sd 2:0:0:0: Attached scsi generic sg1 type 0 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0704c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected ohci1394 0000:0a:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f0400000-f04007ff] Max Packet=[2048] IR/IT contexts=[8/8] sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:0a:01.2: SDHCI controller found [1217:7120] (rev 2) sdhci-pci 0000:0a:01.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 mmc0: Unknown controller version (2). You may experience problems. Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:0a:01.2] using DMA usb 2-3: new high speed USB device using ehci_hcd and address 3 usb 2-3: configuration #1 chosen from 1 choice iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks iwl3945: Copyright(c) 2003-2009 Intel Corporation iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 iwl3945 0000:02:00.0: setting latency timer to 64 iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG iwl3945 0000:02:00.0: irq 28 for MSI/MSI-X Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input9 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1e0b1, caps: 0xd04711/0xa00000 synaptics: Toshiba Satellite A300 detected, limiting rate to 40pps. phy0: Selected rate control algorithm 'iwl-3945-rs' input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10 usb 5-2: new full speed USB device using uhci_hcd and address 2 usb 5-2: configuration #1 chosen from 1 choice EXT4 FS on sda1, internal journal on sda1:8 usb 7-2: new full speed USB device using uhci_hcd and address 2 usbcore: registered new interface driver hiddev input: USB Multi-Smart Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input11 generic-usb 0003:04FC:0801.0001: input,hidraw0: USB HID v1.11 Mouse [USB Multi-Smart Mouse] on usb-0000:00:1d.0-2/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b240000cd7706] usb 7-2: configuration #1 chosen from 1 choice Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.5 usbcore: registered new interface driver btusb EXT4-fs: barriers enabled kjournald2 starting: pid 1832, dev sda2:8, commit interval 5 seconds EXT4 FS on sda2, internal journal on sda2:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem sda2 with ordered data mode Adding 2000052k swap on /dev/sda6. Priority:-1 extents:1 across:2000052k iwl3945 0000:02:00.0: firmware: requesting iwlwifi-3945-2.ucode iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9 Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:02.0: irq 29 for MSI/MSI-X acpi device:03: registered as cooling_device2 acpi device:04: registered as cooling_device3 acpi device:05: registered as cooling_device4 acpi device:06: registered as cooling_device5 acpi device:07: registered as cooling_device6 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input12 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX wlan0: authenticate with AP 00:1e:e5:94:3e:0e wlan0: authenticated wlan0: associate with AP 00:1e:e5:94:3e:0e wlan0: RX AssocResp from 00:1e:e5:94:3e:0e (capab=0x461 status=0 aid=1) wlan0: associated wlan0: authenticate with AP 00:1e:e5:94:3e:0e wlan0: authenticated wlan0: associate with AP 00:1e:e5:94:3e:0e wlan0: RX ReassocResp from 00:1e:e5:94:3e:0e (capab=0x461 status=0 aid=1) wlan0: associated atkbd.c: Unknown key pressed (translated set 2, code 0xf1 on isa0060/serio0). atkbd.c: Use 'setkeycodes e071 ' to make it known. atkbd.c: Unknown key released (translated set 2, code 0xf1 on isa0060/serio0). atkbd.c: Use 'setkeycodes e071 ' to make it known. NET: Registered protocol family 10 lo: Disabled Privacy Extensions wlan0: no IPv6 routers present