FS#15062 - [k3b] does not burn anything

Attached to Project: Arch Linux
Opened by Rasmus Steinke (rasi) - Thursday, 11 June 2009, 23:00 GMT
Last edited by Dan Griffiths (Ghost1227) - Saturday, 13 February 2010, 03:45 GMT
Task Type Bug Report
Category Packages: Extra
Status Closed
Assigned To Tobias Powalowski (tpowa)
Architecture All
Severity Low
Priority Normal
Reported Version
Due in Version Undecided
Due Date Undecided
Percent Complete 100%
Votes 0
Private No

Details

Description: Since k3b was updated to alpha version burning data dvds (at least) does not work


Additional info: The message it gives is unclear: "Error - Sometimes using TAO Mode helps"
TAO mode is not available tho - only "Auto"
tried with both, cdrkit and cdrtools

* package version(s) 1.66.0alpha2-1
This task depends upon

Closed by  Dan Griffiths (Ghost1227)
Saturday, 13 February 2010, 03:45 GMT
Reason for closing:  No response
Additional comments about closing:  The bug in question was caused by wodim, not k3b. As there has been no response on this for some months, it is being closed. If you are still experiencing difficulties please open a new bug on wodim.
Comment by F.Di Milia (PyCoder) - Saturday, 13 June 2009, 13:20 GMT
And i can't write DVD's :(

Output:
"Starting write:
mkisofs crashed."




Debug:

Devices
-----------------------
LITE-ON DVDRW SOHW-1653S CS0M (/dev/sr1, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite] [%7]
JLMS XJ-HD166S DS18 (/dev/sr0, CD-ROM, DVD-ROM) [DVD-ROM, CD-ROM] [None] [%7]

K3b::IsoImager
-----------------------
mkisofs print size result: 1385696 (2837905408 bytes)

System
-----------------------
K3b Version: 1.66.0
KDE Version: 4.2.4 (KDE 4.2.4)
QT Version: 4.5.1
Kernel: 2.6.29-ARCH

Used versions
-----------------------
mkisofs: 2.1
cdrecord: 2.1.1a03

cdrecord
-----------------------
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr1'
devname: '/dev/sr1'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'LITE-ON '
Identification : 'DVDRW SOHW-1653S'
Revision : 'CS0M'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1563904 = 1527 KB
FIFO size : 4194304 = 4096 KB
Speed set to 16620 KB/s
Track 01: data 2706 MB
Total size: 3108 MB (307:55.94) = 1385696 sectors
Lout start: 3108 MB (307:57/71) = 1385696 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 912800
Starting to write CD/DVD at speed 13.0 in dummy SAO mode for single session.
Last chance to quit, starting dummy write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Sending CUE sheet...
Starting new track at sector: 0
Track 01: 0 of 2706 MB written.
Track 01: 1 of 2706 MB written (fifo 82%) [buf 85%] 0.0x.
Track 01: 2 of 2706 MB written (fifo 100%) [buf 99%] 0.7x.
Track 01: 3 of 2706 MB written (fifo 92%) [buf 99%] 5.6x.
Track 01: 4 of 2706 MB written (fifo 98%) [buf 99%] 5.5x.
Track 01: 5 of 2706 MB written (fifo 92%) [buf 99%] 5.6x.
Track 01: 6 of 2706 MB written (fifo 98%) [buf 99%] 5.5x.
Track 01: 7 of 2706 MB written (fifo 98%) [buf 99%] 5.6x.
Track 01: 8 of 2706 MB written (fifo 98%) [buf 99%] 5.5x.
Track 01: 9 of 2706 MB written (fifo 100%) [buf 99%] 5.6x.
Track 01: 10 of 2706 MB written (fifo 96%) [buf 99%] 5.5x.
Track 01: 11 of 2706 MB written (fifo 95%) [buf 99%] 5.6x.
Track 01: 12 of 2706 MB written (fifo 95%) [buf 99%] 5.5x.
Track 01: 13 of 2706 MB written (fifo 98%) [buf 99%] 5.6x.
Track 01: 14 of 2706 MB written (fifo 98%) [buf 99%] 5.5x.
Track 01: 15 of 2706 MB written (fifo 98%) [buf 99%] 5.6x.
Track 01: 16 of 2706 MB written (fifo 96%) [buf 99%] 5.4x.
Track 01: 17 of 2706 MB written (fifo 100%) [buf 99%] 5.6x.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 22 C1 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 36.166s timeout 200s
wodim: A write error occured.
wodim: Please properly read the error message above.
write track data: error after 18221056 bytes
Writing time: 70.782s
Average write speed 29.0x.
Min drive buffer fill was 99%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.004s
wodim: fifo had 351 puts and 288 gets.
wodim: fifo was 0 times empty and 73 times full, min fill was 82%.

cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/sr1 speed=12 -sao -dummy driveropts=burnfree -data -tsize=1385696s -

mkisofs
-----------------------
1385696
Warning: -follow-links does not always work correctly; be careful.
I: -input-charset not specified, using utf-8 (detected in locale settings)
0.04% done, estimate finish Sat Jun 13 15:11:28 2009
0.07% done, estimate finish Sat Jun 13 15:11:28 2009
0.11% done, estimate finish Sat Jun 13 15:11:28 2009
0.15% done, estimate finish Sat Jun 13 15:11:28 2009
0.18% done, estimate finish Sat Jun 13 19:30:07 2009
0.22% done, estimate finish Sat Jun 13 18:53:49 2009
0.25% done, estimate finish Sat Jun 13 18:28:58 2009
0.29% done, estimate finish Sat Jun 13 18:04:30 2009
0.32% done, estimate finish Sat Jun 13 17:45:25 2009
0.36% done, estimate finish Sat Jun 13 17:29:42 2009
0.40% done, estimate finish Sat Jun 13 17:17:15 2009
0.43% done, estimate finish Sat Jun 13 17:06:51 2009
0.47% done, estimate finish Sat Jun 13 16:58:03 2009
0.51% done, estimate finish Sat Jun 13 16:53:34 2009
0.54% done, estimate finish Sat Jun 13 16:46:49 2009
0.58% done, estimate finish Sat Jun 13 16:40:54 2009
0.61% done, estimate finish Sat Jun 13 16:35:41 2009
0.65% done, estimate finish Sat Jun 13 16:30:54 2009
0.69% done, estimate finish Sat Jun 13 16:26:45 2009
0.72% done, estimate finish Sat Jun 13 16:23:01 2009
0.76% done, estimate finish Sat Jun 13 16:21:51 2009

mkisofs calculate size command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -print-size -quiet -volid Sieben Leben -volset -appid K3B THE CD KREATOR (C) 1998-2007 SEBASTIAN TRUEG -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-angelus/k3bFG7726.tmp -no-cache-inodes -udf -iso-level 1 -path-list /tmp/kde-angelus/k3bxD7726.tmp -dvd-video -f /tmp/kde-angelus/k3bVideoDvd0

mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid Sieben Leben -volset -appid K3B THE CD KREATOR (C) 1998-2007 SEBASTIAN TRUEG -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-angelus/k3bXD7726.tmp -no-cache-inodes -udf -iso-level 1 -path-list /tmp/kde-angelus/k3bQG7726.tmp -dvd-video -f /tmp/kde-angelus/k3bVideoDvd0
Comment by Tobias Powalowski (tpowa) - Sunday, 14 June 2009, 07:31 GMT
you ran into a wodim error, wodim crashed and not k3b.
Comment by F.Di Milia (PyCoder) - Sunday, 14 June 2009, 16:31 GMT
WTH is a wodim? ^^
Comment by Roman Kyrylych (Romashka) - Sunday, 14 June 2009, 22:06 GMT
wodim is part of cdrkit, if I remember correctly it's a new name of a forked cdrecord from cdrtools.
Comment by Gerardo Exequiel Pozzi (djgera) - Tuesday, 26 January 2010, 07:06 GMT
  • Field changed: Status (Assigned → Waiting on Response)
what is the status of this issue?

Loading...