BIOS EBDA/lowmem at: 0009fc00/0009fc00 Linux version 2.6.28-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Sun Feb 22 11:03:50 UTC 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cff80000 (usable) BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data) BIOS-e820: 00000000cff8e000 - 00000000cffb8000 (ACPI NVS) BIOS-e820: 00000000cffbc000 - 00000000cffee000 (reserved) BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved) BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000120000000 (usable) DMI present. last_pfn = 0xcff80 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Scanning 2 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000002000 (usable) modified: 0000000000002000 - 0000000000006000 (reserved) modified: 0000000000006000 - 0000000000007000 (usable) modified: 0000000000007000 - 0000000000010000 (reserved) modified: 0000000000010000 - 0000000000092c00 (usable) modified: 000000000009fc00 - 00000000000a0000 (reserved) modified: 00000000000e6000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000cff80000 (usable) modified: 00000000cff80000 - 00000000cff8e000 (ACPI data) modified: 00000000cff8e000 - 00000000cffb8000 (ACPI NVS) modified: 00000000cffbc000 - 00000000cffee000 (reserved) modified: 00000000cfff0000 - 00000000d0000000 (reserved) modified: 00000000ff700000 - 0000000100000000 (reserved) modified: 0000000100000000 - 0000000120000000 (usable) kernel direct mapping tables up to 377fe000 @ 10000-16000 RAMDISK: 7f93e000 - 7ffefde9 Allocated new RAMDISK: 0055f000 - 00c10de9 Move RAMDISK from 000000007f93e000 - 000000007ffefde8 to 0055f000 - 00c10de8 ACPI: RSDP 000F9D50, 0024 (r2 ACPIAM) ACPI: XSDT CFF80100, 0064 (r1 DELL FX09 20080904 MSFT 97) ACPI: FACP CFF80290, 00F4 (r3 DELL FX09 20080904 MSFT 97) ACPI: DSDT CFF80640, 49D1 (r1 1AAAA 1AAAA000 0 INTL 20051117) ACPI: FACS CFF8E000, 0040 ACPI: APIC CFF80390, 006C (r1 DELL FX09 20080904 MSFT 97) ACPI: MCFG CFF80400, 003C (r1 DELL OEMMCFG 20080904 MSFT 97) ACPI: SLIC CFF80440, 0176 (r1 DELL FX09 20080904 MSFT 97) ACPI: OSFR CFF805C0, 0080 (r1 DELL FX09 20080904 MSFT 97) ACPI: OEMB CFF8E040, 0071 (r1 DELL FX09 20080904 MSFT 97) ACPI: HPET CFF85020, 0038 (r1 DELL OEMHPET 20080904 MSFT 97) ACPI: SSDT CFF85060, 0248 (r1 A M I POWERNOW 1 AMD 1) ACPI: Local APIC address 0xfee00000 2439MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 00000000 - 377fe000 bootmap 00012000 - 00018f00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 000055b520] TEXT DATA BSS ==> [0000100000 - 000055b520] #4 [000055c000 - 000055f000] INIT_PG_TABLE ==> [000055c000 - 000055f000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #7 [000055f000 - 0000c10de9] NEW RAMDISK ==> [000055f000 - 0000c10de9] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] found SMP MP-table at [c00ff780] 000ff780 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x000cff80 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x00000002 0: 0x00000006 -> 0x00000007 0: 0x00000010 -> 0x00000092 0: 0x00000100 -> 0x000cff80 On node 0 totalpages: 851717 free_area_init_node: node 0, pgdat c0406600, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3941 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 4880 pages used for memmap HighMem zone: 619634 pages, LIFO batch:31 Movable zone: 0 pages used for memmap Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8300 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 2 hotplug CPUs PM: Registered nosave memory: 0000000000002000 - 0000000000006000 PM: Registered nosave memory: 0000000000007000 - 0000000000010000 PM: Registered nosave memory: 0000000000092000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 Allocating PCI resources starting at d4000000 (gap: d0000000:2f700000) PERCPU: Allocating 36864 bytes of per cpu data NR_CPUS: 16, nr_cpu_ids: 4, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 845061 Kernel command line: elevator=deadline lang=en_US load=overlay;cata from=/dev/sda4/archisocd vga=791 driver=fglrx Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 2308.019 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Scanning for low memory corruption every 60 seconds Memory: 3367032k/3407360k available (2228k kernel code, 38992k reserved, 1026k data, 332k init, 2498056k highmem) virtual kernel memory layout: fixmap : 0xffee8000 - 0xfffff000 (1116 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0433000 - 0xc0486000 ( 332 kB) .data : 0xc032d1b9 - 0xc042db5c (1026 kB) .text : 0xc0100000 - 0xc032d1b9 (2228 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered HPET: 4 timers in total, 1 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4617.37 BogoMIPS (lpj=7693396) Security Framework initialized Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using C1E aware idle routine Checking 'hlt' instruction... OK. ACPI: Core revision 20080926 ACPI: Checking initramfs for custom DSDT ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) Dual Core Processor 4450e stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4602.11 BogoMIPS (lpj=7667383) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Athlon(tm) Dual Core Processor 4450e stepping 02 Brought up 2 CPUs Total of 2 processors activated (9220.48 BogoMIPS). net_namespace: 768 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:11.0: reg 10 io port: [0xb000-0xb007] pci 0000:00:11.0: reg 14 io port: [0xa000-0xa003] pci 0000:00:11.0: reg 18 io port: [0x9000-0x9007] pci 0000:00:11.0: reg 1c io port: [0x8000-0x8003] pci 0000:00:11.0: reg 20 io port: [0x7000-0x700f] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe7ff800-0xfe7ffbff] pci 0000:00:11.0: set SATA to AHCI mode pci 0000:00:12.0: reg 10 32bit mmio: [0xfe7fe000-0xfe7fefff] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe7fd000-0xfe7fdfff] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe7ff000-0xfe7ff0ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10 32bit mmio: [0xfe7fc000-0xfe7fcfff] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe7fb000-0xfe7fbfff] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe7fa800-0xfe7fa8ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.1: reg 10 io port: [0x00-0x07] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe7f4000-0xfe7f7fff] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:01:05.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] pci 0000:01:05.0: reg 14 io port: [0xc000-0xc0ff] pci 0000:01:05.0: reg 18 32bit mmio: [0xfe9f0000-0xfe9fffff] pci 0000:01:05.0: reg 24 32bit mmio: [0xfe800000-0xfe8fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] pci 0000:00:01.0: bridge 32bit mmio: [0xfe800000-0xfe9fffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:02:00.0: reg 10 io port: [0xd800-0xd8ff] pci 0000:02:00.0: reg 18 64bit mmio: [0xfeaff000-0xfeafffff] pci 0000:02:00.0: reg 20 64bit mmio: [0xfdff0000-0xfdffffff] pci 0000:02:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:0a.0: bridge io port: [0xd000-0xdfff] pci 0000:00:0a.0: bridge 32bit mmio: [0xfea00000-0xfeafffff] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] pci 0000:03:05.0: reg 10 32bit mmio: [0xfebf0000-0xfebfffff] pci 0000:03:05.0: reg 14 io port: [0xe800-0xe807] pci 0000:03:05.0: PME# supported from D3hot D3cold pci 0000:03:05.0: PME# disabled pci 0000:03:06.0: reg 10 32bit mmio: [0xfebef000-0xfebeffff] pci 0000:03:06.0: supports D1 D2 pci 0000:03:06.0: PME# supported from D0 D1 D2 D3hot pci 0000:03:06.0: PME# disabled pci 0000:00:14.4: transparent bridge pci 0000:00:14.4: bridge io port: [0xe000-0xefff] pci 0000:00:14.4: bridge 32bit mmio: [0xfeb00000-0xfebfffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *4 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15) PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet: hpet2 irq 767 for MSI Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0a: ioport range 0x4d0-0x4d1 has been reserved system 00:0a: ioport range 0x40b-0x40b has been reserved system 00:0a: ioport range 0x4d6-0x4d6 has been reserved system 00:0a: ioport range 0xc00-0xc01 has been reserved system 00:0a: ioport range 0xc14-0xc14 has been reserved system 00:0a: ioport range 0xc50-0xc51 has been reserved system 00:0a: ioport range 0xc52-0xc52 has been reserved system 00:0a: ioport range 0xc6c-0xc6c has been reserved system 00:0a: ioport range 0xc6f-0xc6f has been reserved system 00:0a: ioport range 0xcd0-0xcd1 has been reserved system 00:0a: ioport range 0xcd2-0xcd3 has been reserved system 00:0a: ioport range 0xcd4-0xcd5 has been reserved system 00:0a: ioport range 0xcd6-0xcd7 has been reserved system 00:0a: ioport range 0xcd8-0xcdf has been reserved system 00:0a: ioport range 0x800-0x89f has been reserved system 00:0a: ioport range 0xb00-0xb0f has been reserved system 00:0a: ioport range 0xb20-0xb3f has been reserved system 00:0a: ioport range 0x900-0x90f has been reserved system 00:0a: ioport range 0x910-0x91f has been reserved system 00:0a: ioport range 0xfe00-0xfefe has been reserved system 00:0a: iomem range 0xffb80000-0xffbfffff has been reserved system 00:0a: iomem range 0xfec10000-0xfec1001f has been reserved system 00:0b: ioport range 0xe00-0xe0f has been reserved system 00:0b: ioport range 0xe80-0xe8f has been reserved system 00:0b: ioport range 0xf40-0xf4f has been reserved system 00:0b: ioport range 0xa30-0xa3f has been reserved system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xcffff could not be reserved system 00:0d: iomem range 0xe0000-0xfffff could not be reserved system 00:0d: iomem range 0x100000-0xcfffffff could not be reserved system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xc000-0xcfff pci 0000:00:01.0: MEM window: 0xfe800000-0xfe9fffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0a.0: IO window: 0xd000-0xdfff pci 0000:00:0a.0: MEM window: 0xfea00000-0xfeafffff pci 0000:00:0a.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 pci 0000:00:14.4: IO window: 0xe000-0xefff pci 0000:00:14.4: MEM window: 0xfeb00000-0xfebfffff pci 0000:00:14.4: PREFETCH window: disabled pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:0a.0: setting latency timer to 64 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffff] bus: 01 index 0 io port: [0xc000-0xcfff] bus: 01 index 1 mmio: [0xfe800000-0xfe9fffff] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff] bus: 01 index 3 mmio: [0x0-0x0] bus: 02 index 0 io port: [0xd000-0xdfff] bus: 02 index 1 mmio: [0xfea00000-0xfeafffff] bus: 02 index 2 mmio: [0xfdf00000-0xfdffffff] bus: 02 index 3 mmio: [0x0-0x0] bus: 03 index 0 io port: [0xe000-0xefff] bus: 03 index 1 mmio: [0xfeb00000-0xfebfffff] bus: 03 index 2 mmio: [0x0-0x0] bus: 03 index 3 io port: [0x00-0xffff] bus: 03 index 4 mmio: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 6855k freed apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1712 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered pci 0000:01:05.0: Boot video device pcieport-driver 0000:00:0a.0: setting latency timer to 64 pcieport-driver 0000:00:0a.0: found MSI capability pcieport-driver 0000:00:0a.0: irq 766 for MSI/MSI-X pci_express 0000:00:0a.0:pcie00: allocate port service pci_express 0000:00:0a.0:pcie03: allocate port service vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 3072k, total 16384k vesafb: mode is 1024x768x16, linelength=2048, pages=9 vesafb: protected mode interface info at c000:a198 vesafb: pmi: set display start = c00ca23a, set palette = c00ca2f8 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver4 ports, IRQ sharing disabled input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PSKE,PNP0f03:PSMS] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 332k freed SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb libata version 3.00 loaded. ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ff900 irq 22 ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 22 ohci1394 0000:03:06.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ata3: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa00 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa80 irq 22 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[23] MMIO=[febef000-febef7ff] Max Packet=[2048] IR/IT contexts=[8/8] ata1: softreset failed (device not ready) ata1: failed due to HW bug, retry pmp=0 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD6400AAKS-75A7B0, 01.03B01, max UDMA/133 ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00219b800013e282] ata2: softreset failed (device not ready) ata2: failed due to HW bug, retry pmp=0 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-H653F, D200, max UDMA/100 ata2.00: applying bridge limits ata2.00: configured for UDMA/100 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA WDC WD6400AAKS-7 01.0 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-H653F D200 PQ: 0 ANSI: 5 pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_acpi 0000:00:14.1: setting latency timer to 64 ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7ff000 Driver 'sd' needs updating - please use bus_type methods ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors: (640 GB/596 GiB) scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors: (640 GB/596 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<6>usb 1-6: new high speed USB device using ehci_hcd and address 2 sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.2: debug port 1 usb 1-6: configuration #1 chosen from 1 choice ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe7fa800 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe7fe000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe7fd000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 usb 2-4: new high speed USB device using ehci_hcd and address 4 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe7fc000 usb usb5: configuration #1 chosen from 1 choice usb 2-4: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Initializing USB Mass Storage driver... scsi6 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 4 scsi 6:0:0:0: Direct-Access WD 1600BEV External 1.05 PQ: 0 ANSI: 4 sd 6:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 21 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 21 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sdb:<6>usb 2-6: new high speed USB device using ehci_hcd and address 5 usb 2-6: configuration #1 chosen from 1 choice scsi7 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 scsi 7:0:0:0: Direct-Access TEAC USB HS-CF Card 4.08 PQ: 0 ANSI: 0 sd 7:0:0:0: [sdc] Attached SCSI removable disk scsi 7:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.08 PQ: 0 ANSI: 0 sd 7:0:0:1: [sdd] Attached SCSI removable disk scsi 7:0:0:2: Direct-Access TEAC USB HS-MS Card 4.08 PQ: 0 ANSI: 0 sd 7:0:0:2: [sde] Attached SCSI removable disk scsi 7:0:0:3: Direct-Access TEAC USB HS-SD Card 4.08 PQ: 0 ANSI: 0 sd 7:0:0:3: [sdf] Attached SCSI removable disk usb-storage: device scan complete ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe7fb000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected usb 5-1: new low speed USB device using ohci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice usb 5-2: new low speed USB device using ohci_hcd and address 3 usb 5-2: configuration #1 chosen from 1 choice sdb1 sd 6:0:0:0: [sdb] Attached SCSI disk usb-storage: device scan complete EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended squashfs: version 3.4 (2008/08/26) Phillip Lougher squashfs: LZMA suppport for slax.org by jro aufs 20081208 loop: module loaded aufs au_xino_create:514:mount[1061]: open /xino/.aufs.xino(-2) ext3: Unknown symbol journal_force_commit ext3: Unknown symbol journal_dirty_data ext3: Unknown symbol journal_force_commit_nested ext3: Unknown symbol journal_init_dev ext3: Unknown symbol journal_dirty_metadata ext3: Unknown symbol journal_forget ext3: Unknown symbol journal_wipe ext3: Unknown symbol journal_blocks_per_page ext3: Unknown symbol journal_errno ext3: Unknown symbol journal_extend ext3: Unknown symbol journal_invalidatepage ext3: Unknown symbol journal_create ext3: Unknown symbol journal_unlock_updates ext3: Unknown symbol journal_revoke ext3: Unknown symbol journal_lock_updates ext3: Unknown symbol journal_start_commit ext3: Unknown symbol journal_flush ext3: Unknown symbol journal_load ext3: Unknown symbol journal_try_to_free_buffers ext3: Unknown symbol journal_update_format ext3: Unknown symbol journal_get_write_access ext3: Unknown symbol journal_get_undo_access ext3: Unknown symbol journal_get_create_access ext3: Unknown symbol journal_destroy ext3: Unknown symbol journal_clear_err ext3: Unknown symbol journal_stop ext3: Unknown symbol journal_init_inode ext3: Unknown symbol journal_start ext3: Unknown symbol journal_release_buffer ext3: Unknown symbol journal_check_available_features ext3: Unknown symbol journal_abort ext3: Unknown symbol journal_restart ext3: Unknown symbol journal_force_commit ext3: Unknown symbol journal_dirty_data ext3: Unknown symbol journal_force_commit_nested ext3: Unknown symbol journal_init_dev ext3: Unknown symbol journal_dirty_metadata ext3: Unknown symbol journal_forget ext3: Unknown symbol journal_wipe ext3: Unknown symbol journal_blocks_per_page ext3: Unknown symbol journal_errno ext3: Unknown symbol journal_extend ext3: Unknown symbol journal_invalidatepage ext3: Unknown symbol journal_create ext3: Unknown symbol journal_unlock_updates ext3: Unknown symbol journal_revoke ext3: Unknown symbol journal_lock_updates ext3: Unknown symbol journal_start_commit ext3: Unknown symbol journal_flush ext3: Unknown symbol journal_load ext3: Unknown symbol journal_try_to_free_buffers ext3: Unknown symbol journal_update_format ext3: Unknown symbol journal_get_write_access ext3: Unknown symbol journal_get_undo_access ext3: Unknown symbol journal_get_create_access ext3: Unknown symbol journal_destroy ext3: Unknown symbol journal_clear_err ext3: Unknown symbol journal_stop ext3: Unknown symbol journal_init_inode ext3: Unknown symbol journal_start ext3: Unknown symbol journal_release_buffer ext3: Unknown symbol journal_check_available_features ext3: Unknown symbol journal_abort ext3: Unknown symbol journal_restart SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem fuse init (API version 7.10) NTFS driver 2.1.29 [Flags: R/W MODULE]. rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Successfully done. vboxdrv: Found 2 processor cores. vboxdrv: fAsync=1 offMin=0x8903a offMax=0x8903a vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009). input: Power Button (FF) as /class/input/input1 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input2 ACPI: Power Button (CM) [PWRB] processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [P001] (supports 8 throttling states) processor ACPI_CPU:01: registered as cooling_device1 input: PC Speaker as /class/input/input3 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 sd 7:0:0:0: Attached scsi generic sg2 type 0 sd 7:0:0:1: Attached scsi generic sg3 type 0 sd 7:0:0:2: Attached scsi generic sg4 type 0 sd 7:0:0:3: Attached scsi generic sg5 type 0 sd 6:0:0:0: Attached scsi generic sg6 type 0 shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0 shpchp 0000:00:01.0: Cannot reserve MMIO region shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 usbcore: registered new interface driver hiddev cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US input: Dell Dell USB Optical Mouse as /class/input/input4 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:02:00.0: setting latency timer to 64 r8169 0000:02:00.0: irq 765 for MSI/MSI-X eth0: RTL8168c/8111c at 0xf9396000, 00:21:9b:13:e2:82, XID 3c4000c0 IRQ 765 piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 generic-usb 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:13.0-1/input0 Error: Driver 'pcspkr' is already registered, aborting... input: Dell Dell USB Keyboard as /class/input/input5 generic-usb 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:13.0-2/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... Linux agpgart interface v0.103 phy0: Selected rate control algorithm 'pid' fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. cfg80211: Regulatory domain changed to country: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [fglrx] Maximum main memory to use for locked dma buffers: 3145 MBytes. [fglrx] vendor: 1002 device: 9610 count: 1 [fglrx] ioport: bar 1, base 0xc000, size: 0x100 pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:01:05.0: setting latency timer to 64 [fglrx] Kernel PAT support detected, disabling driver built-in PAT support [fglrx] module loaded - fglrx 8.57.2 [Jan 14 2009] with 1 minors phy0: hwaddr 00:18:4d:5f:d8:7f, RTL8187vB (default) V1 + rtl8225z2 usbcore: registered new interface driver rtl8187 usbcore: deregistering interface driver rtl8187 r8169: eth0: link down NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready phy1: Selected rate control algorithm 'pid' phy1: hwaddr 00:18:4d:5f:d8:7f, RTL8187vB (default) V1 + rtl8225z2 usbcore: registered new interface driver rtl8187 [fglrx] Firegl kernel thread PID: 7088 [fglrx] Gart cacheable size:1643 M. [fglrx] Reserved FB block: Shared offset:0, size:1000000 [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000 BUG: scheduling while atomic: X/7069/0x00000002 Modules linked in: rtl8187 ipv6 snd_seq_oss arc4 snd_seq_midi_event snd_seq snd_seq_device ecb fglrx(P) snd_pcm_oss snd_mixer_oss agpgart mac80211 snd_hda_intel eeprom_93cx6 snd_hwdep i2c_piix4 r8169 usbhid cfg80211 mii snd_pcm shpchp sg i2c_core snd_timer pci_hotplug hid dcdbas snd snd_page_alloc serio_raw pcspkr k8temp soundcore thermal processor evdev fan button battery ac vboxdrv psmouse rtc_cmos rtc_core rtc_lib ntfs fuse xfs reiserfs loop aufs squashfs sqlzma unlzma ext2 mbcache nls_cp437 vfat fat isofs zlib_inflate usb_storage ohci_hcd ata_generic sr_mod cdrom sd_mod pata_atiixp ohci1394 ieee1394 ehci_hcd pata_acpi ahci libata usbcore scsi_mod [last unloaded: rtl8187] Pid: 7069, comm: X Tainted: P 2.6.28-ARCH #1 Call Trace: [] schedule+0x4a7/0x970 [] __wake_up+0x3e/0x60 [] KAS_Event_Set+0x90/0xa0 [fglrx] [] MCIL_KernelEvent+0x121/0x360 [fglrx] [] default_spin_lock_flags+0x5/0x10 [] _spin_lock_irqsave+0x3e/0x60 [] KAS_Thread_WaitForFinish+0x8c/0xc0 [fglrx] [] autoremove_wake_function+0x0/0x50 [] MCIL_WorkerThread+0x1da/0x2c0 [fglrx] [] __slab_free+0xd3/0x350 [] PassiveRing_Cleanup+0x60/0xc0 [fglrx] [] remove_proc_entry+0x1c1/0x250 [] remove_proc_entry+0x1c1/0x250 [] remove_proc_entry+0x1c1/0x250 [] IRQMGR_FreeResources+0x21/0x90 [fglrx] [] default_spin_lock_flags+0x5/0x10 [] _spin_lock_irqsave+0x3e/0x60 [] IRQMGR_shutdown+0x95/0xe0 [fglrx] [] irqmgr_wrap_shutdown+0x163/0x2d0 [fglrx] [] firegl_takedown+0x54/0xa70 [fglrx] [] default_spin_lock_flags+0x5/0x10 [] _spin_lock_irqsave+0x3e/0x60 [] firegl_release+0x12f/0x1b0 [fglrx] [] ip_firegl_release+0xb/0x10 [fglrx] [] __fput+0x9f/0x1a0 [] filp_close+0x49/0x80 [] put_files_struct+0x62/0xb0 [] do_exit+0x6a0/0x820 [] __dequeue_signal+0xbb/0x180 [] recalc_sigpending+0xb/0x30 [] dequeue_signal+0x2f/0x1c0 [] do_lookup+0x93/0x1e0 [] do_group_exit+0x2d/0x90 [] get_signal_to_deliver+0x238/0x3a0 [] __link_path_walk+0x6bc/0xe10 [] _spin_lock+0x11/0x20 [] do_notify_resume+0xc1/0x7f0 [] signal_wake_up+0x23/0x40 [] send_signal+0x11e/0x290 [] aufs_release_nondir+0x27/0x50 [aufs] [] _spin_unlock+0x5/0x20 [] _spin_lock+0x11/0x20 [] _atomic_dec_and_lock+0x47/0x70 [] _spin_unlock+0x5/0x20 [] dput+0xd5/0x130 [] mntput_no_expire+0x18/0x110 [] _spin_unlock_irq+0x5/0x30 [] sigprocmask+0x73/0xf0 [] sys_rt_sigprocmask+0xec/0x110 [] sys_rt_sigprocmask+0xec/0x110 [] work_notifysig+0x13/0x1b ADDRCONF(NETDEV_UP): wlan0: link is not ready BUG: unable to handle kernel paging request at f8525428 IP: [] ulReadMmRegisterUlongViaAddr+0xf/0x20 [fglrx] *pde = 373ed067 *pte = 00000000 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:18.3/resource Modules linked in: rtl8187 ipv6 snd_seq_oss arc4 snd_seq_midi_event snd_seq snd_seq_device ecb fglrx(P) snd_pcm_oss snd_mixer_oss agpgart mac80211 snd_hda_intel eeprom_93cx6 snd_hwdep i2c_piix4 r8169 usbhid cfg80211 mii snd_pcm shpchp sg i2c_core snd_timer pci_hotplug hid dcdbas snd snd_page_alloc serio_raw pcspkr k8temp soundcore thermal processor evdev fan button battery ac vboxdrv psmouse rtc_cmos rtc_core rtc_lib ntfs fuse xfs reiserfs loop aufs squashfs sqlzma unlzma ext2 mbcache nls_cp437 vfat fat isofs zlib_inflate usb_storage ohci_hcd ata_generic sr_mod cdrom sd_mod pata_atiixp ohci1394 ieee1394 ehci_hcd pata_acpi ahci libata usbcore scsi_mod [last unloaded: rtl8187] Pid: 7135, comm: X Tainted: P (2.6.28-ARCH #1) Inspiron 519 EIP: 0060:[] EFLAGS: 00213286 CPU: 1 EIP is at ulReadMmRegisterUlongViaAddr+0xf/0x20 [fglrx] EAX: 00000000 EBX: f3cdc918 ECX: 0000150a EDX: f8520000 ESI: f8520000 EDI: 0000150a EBP: f5293d64 ESP: f5293d64 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process X (pid: 7135, ti=f5292000 task=f4294000 task.ti=f5292000) Stack: f5293d94 f9643418 f8520000 0000150a fe9f0000 c01223dc 00000000 00000000 00000000 00000000 0000150a f3cdc800 f5293dc4 f962e239 f3cdc800 0000150a f5293dc4 f9632ee7 f3cdc918 00000053 f4d6b5c0 f3cdc918 f3cdc800 bf940b50 Call Trace: [] ulReadMmRegisterUlong+0x68/0x170 [fglrx] [] _set_memory_uc+0x2c/0x30 [] Cail_RS780_RestoreAdapterCfgRegisters+0x29/0x220 [fglrx] [] Cail_R600_RestoreAdapterCfgRegisters+0x87/0xb0 [fglrx] [] CAILExit+0x17d/0x1b0 [fglrx] [] drm_ioremap_nocache+0xda/0x150 [fglrx] [] firegl_cail_free+0x3c/0x70 [fglrx] [] hal_init_asic+0x51a/0x6e0 [fglrx] [] hal_init_asic+0x0/0x6e0 [fglrx] [] hal_init_asic+0x0/0x6e0 [fglrx] [] firegl_ioctl+0x22d/0x2b0 [fglrx] [] ip_firegl_ioctl+0x17/0x20 [fglrx] [] vfs_ioctl+0x78/0x90 [] do_vfs_ioctl+0x67/0x4d0 [] vfs_write+0xfe/0x160 [] sys_ioctl+0x66/0x70 [] sysenter_do_call+0x12/0x33 Code: 7c 24 04 e8 a4 54 ff ff 85 c0 0f 84 28 ff ff ff e9 d2 fe ff ff 8d b4 26 00 00 00 00 55 31 c0 89 e5 8b 55 08 85 d2 74 06 8b 4d 0c <8b> 04 8a 5d c3 8d b6 00 00 00 00 8d bf 00 00 00 00 55 89 e5 8b EIP: [] ulReadMmRegisterUlongViaAddr+0xf/0x20 [fglrx] SS:ESP 0068:f5293d64 ---[ end trace 8ed10e7581381a7e ]--- [fglrx:firegl_release] *ERROR* device busy: 1 0 [fglrx] release failed with code -EBUSY [fglrx] Firegl kernel thread PID: 7149 [fglrx] Gart cacheable size:1643 M. [fglrx] Reserved FB block: Shared offset:0, size:1000000 [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000 wlan0: authenticate with AP 00:18:f8:42:56:0f wlan0: authenticated wlan0: associate with AP 00:18:f8:42:56:0f wlan0: RX AssocResp from 00:18:f8:42:56:0f (capab=0x411 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present