wpa_supplicant v2.9
Successfully initialized wpa_supplicant
Initializing interface 'wlp2s0' conf 'wlp2s0.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
Configuration file 'wlp2s0.conf' -> '/root/wlp2s0.conf'
Reading configuration file '/root/wlp2s0.conf'
Line: 1 - start of a new network block
ssid - hexdump_ascii(len=7):
     4e 65 75 6c 61 6e 64                              Neuland         
PSK - hexdump(len=32): [REMOVED]
Priority group 0
   id=0 ssid='Neuland'
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:6
nl80211: interface wlp2s0 in phy phy1
nl80211: Set mode ifindex 5 iftype 2 (STATION)
nl80211: Subscribe to mgmt frames with non-AP handle 0x561c4ec64020
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=0104
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=2): 01 04
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=040a
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=2): 04 0a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=040b
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=2): 04 0b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=040c
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=2): 04 0c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=040d
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=2): 04 0d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=090a
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=2): 09 0a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=090b
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=2): 09 0b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=090c
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=2): 09 0c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=090d
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=2): 09 0d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=0409506f9a09
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=7f506f9a09
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=5): 7f 50 6f 9a 09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=0409506f9a1a
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 1a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=0801
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=2): 08 01
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=12
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=1): 12
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=06
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=1): 06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=0a07
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=2): 0a 07
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=0a11
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=2): 0a 11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=0a1a
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=2): 0a 1a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=1101
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=2): 11 01
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=1102
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=2): 11 02
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=0505
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=2): 05 05
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x561c4ec64020 match=0500
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=2): 05 00
nl80211: Failed to register Action frame processing - ignore for now
rfkill: initial event: idx=2 type=1 op=0 soft=0 hard=0
netlink: Operstate: ifindex=5 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
Add interface wlp2s0 to a new radio phy1
nl80211: Regulatory information - country=DE (DFS-ETSI)
nl80211: 2400-2483 @ 40 MHz 20 mBm
nl80211: 5150-5250 @ 80 MHz 23 mBm (no outdoor)
nl80211: 5250-5350 @ 80 MHz 20 mBm (no outdoor) (DFS)
nl80211: 5470-5725 @ 160 MHz 26 mBm (DFS)
nl80211: 5725-5875 @ 80 MHz 13 mBm
nl80211: 57000-66000 @ 2160 MHz 40 mBm
nl80211: Added 802.11b mode based on 802.11g information
nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED][NO_IR]
nl80211: Mode IEEE 802.11a: 5160 5170 5180 5190 5200 5210 5220 5230 5240 5250[DISABLED] 5260[RADAR] 5270[RADAR] 5280[RADAR] 5290[RADAR] 5300[RADAR] 5310[RADAR] 5320[RADAR] 5330[RADAR] 5340[RADAR] 5350[DISABLED] 5360[DISABLED]
nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED][NO_IR]
wlp2s0: Own MAC address: c4:8e:8f:f8:9e:f5
wpa_driver_nl80211_set_key: ifindex=5 (wlp2s0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=5 (wlp2s0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=5 (wlp2s0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=5 (wlp2s0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=5 (wlp2s0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=5 (wlp2s0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0
wlp2s0: RSN: flushing PMKID list in the driver
nl80211: Flush PMKIDs
wlp2s0: Setting scan request: 0.100000 sec
TDLS: TDLS operation not supported by driver
TDLS: Driver uses internal link setup
TDLS: Driver does not support TDLS channel switching
wlp2s0: WPS: UUID based on MAC address: 91fb10ee-622a-5188-852c-4000f9a97641
ENGINE: Loading builtin engines
ENGINE: Loading builtin engines
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
wlp2s0: Added interface wlp2s0
wlp2s0: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=5 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
RTM_NEWLINK: ifi_index=5 ifname=wlp2s0 operstate=5 linkmode=0 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK: ifi_index=5 ifname=wlp2s0 operstate=5 linkmode=1 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
wlp2s0: State: DISCONNECTED -> SCANNING
wlp2s0: Starting AP scan for wildcard SSID
wlp2s0: Add radio work 'scan'@0x561c4ec92f90
wlp2s0: First radio work item in the queue - schedule start immediately
wlp2s0: Starting radio work 'scan'@0x561c4ec92f90 after 0.000023 second wait
wlp2s0: nl80211: scan request
nl80211: Scan SSID 
nl80211: Scan extra IEs - hexdump(len=2): 72 00
nl80211: Scan trigger failed: ret=-22 (Invalid argument)
wlp2s0: State: SCANNING -> DISCONNECTED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=5 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp2s0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
wlp2s0: Radio work 'scan'@0x561c4ec92f90 done in 0.000213 seconds
wlp2s0: radio_work_free('scan'@0x561c4ec92f90): num_active_works --> 0
wlp2s0: Setting scan request: 1.000000 sec
EAPOL: disable timer tick
wlp2s0: State: DISCONNECTED -> SCANNING
wlp2s0: Starting AP scan for wildcard SSID
wlp2s0: Add radio work 'scan'@0x561c4ec92f90
wlp2s0: First radio work item in the queue - schedule start immediately
wlp2s0: Starting radio work 'scan'@0x561c4ec92f90 after 0.000023 second wait
wlp2s0: nl80211: scan request
nl80211: Scan SSID 
nl80211: Scan extra IEs - hexdump(len=2): 72 00
nl80211: Scan trigger failed: ret=-22 (Invalid argument)
wlp2s0: State: SCANNING -> DISCONNECTED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=5 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp2s0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
wlp2s0: Radio work 'scan'@0x561c4ec92f90 done in 0.000197 seconds
wlp2s0: radio_work_free('scan'@0x561c4ec92f90): num_active_works --> 0
wlp2s0: Setting scan request: 1.000000 sec
wlp2s0: State: DISCONNECTED -> SCANNING
wlp2s0: Starting AP scan for wildcard SSID
wlp2s0: Add radio work 'scan'@0x561c4ec92f90
wlp2s0: First radio work item in the queue - schedule start immediately
wlp2s0: Starting radio work 'scan'@0x561c4ec92f90 after 0.000022 second wait
wlp2s0: nl80211: scan request
nl80211: Scan SSID 
nl80211: Scan extra IEs - hexdump(len=2): 72 00
nl80211: Scan trigger failed: ret=-22 (Invalid argument)
wlp2s0: State: SCANNING -> DISCONNECTED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=5 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp2s0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
wlp2s0: Radio work 'scan'@0x561c4ec92f90 done in 0.000203 seconds
wlp2s0: radio_work_free('scan'@0x561c4ec92f90): num_active_works --> 0
wlp2s0: Setting scan request: 1.000000 sec
wlp2s0: State: DISCONNECTED -> SCANNING
wlp2s0: Starting AP scan for wildcard SSID
wlp2s0: Add radio work 'scan'@0x561c4ec92f90
wlp2s0: First radio work item in the queue - schedule start immediately
wlp2s0: Starting radio work 'scan'@0x561c4ec92f90 after 0.000009 second wait
wlp2s0: nl80211: scan request
nl80211: Scan SSID 
nl80211: Scan extra IEs - hexdump(len=2): 72 00
nl80211: Scan trigger failed: ret=-22 (Invalid argument)
wlp2s0: State: SCANNING -> DISCONNECTED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=5 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp2s0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
wlp2s0: Radio work 'scan'@0x561c4ec92f90 done in 0.000083 seconds
wlp2s0: radio_work_free('scan'@0x561c4ec92f90): num_active_works --> 0
wlp2s0: Setting scan request: 1.000000 sec
wlp2s0: State: DISCONNECTED -> SCANNING
wlp2s0: Starting AP scan for wildcard SSID
wlp2s0: Add radio work 'scan'@0x561c4ec92f90
wlp2s0: First radio work item in the queue - schedule start immediately
wlp2s0: Starting radio work 'scan'@0x561c4ec92f90 after 0.000065 second wait
wlp2s0: nl80211: scan request
nl80211: Scan SSID 
nl80211: Scan extra IEs - hexdump(len=2): 72 00
nl80211: Scan trigger failed: ret=-22 (Invalid argument)
wlp2s0: State: SCANNING -> DISCONNECTED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=5 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp2s0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
wlp2s0: Radio work 'scan'@0x561c4ec92f90 done in 0.000203 seconds
wlp2s0: radio_work_free('scan'@0x561c4ec92f90): num_active_works --> 0
wlp2s0: Setting scan request: 1.000000 sec
wlp2s0: State: DISCONNECTED -> SCANNING
wlp2s0: Starting AP scan for wildcard SSID
wlp2s0: Add radio work 'scan'@0x561c4ec92f90
wlp2s0: First radio work item in the queue - schedule start immediately
wlp2s0: Starting radio work 'scan'@0x561c4ec92f90 after 0.000023 second wait
wlp2s0: nl80211: scan request
nl80211: Scan SSID 
nl80211: Scan extra IEs - hexdump(len=2): 72 00
nl80211: Scan trigger failed: ret=-22 (Invalid argument)
wlp2s0: State: SCANNING -> DISCONNECTED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=5 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp2s0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
wlp2s0: Radio work 'scan'@0x561c4ec92f90 done in 0.000216 seconds
wlp2s0: radio_work_free('scan'@0x561c4ec92f90): num_active_works --> 0
wlp2s0: Setting scan request: 1.000000 sec
wlp2s0: State: DISCONNECTED -> SCANNING
wlp2s0: Starting AP scan for wildcard SSID
wlp2s0: Add radio work 'scan'@0x561c4ec92f90
wlp2s0: First radio work item in the queue - schedule start immediately
wlp2s0: Starting radio work 'scan'@0x561c4ec92f90 after 0.000008 second wait
wlp2s0: nl80211: scan request
nl80211: Scan SSID 
nl80211: Scan extra IEs - hexdump(len=2): 72 00
nl80211: Scan trigger failed: ret=-22 (Invalid argument)
wlp2s0: State: SCANNING -> DISCONNECTED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=5 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp2s0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
wlp2s0: Radio work 'scan'@0x561c4ec92f90 done in 0.000080 seconds
wlp2s0: radio_work_free('scan'@0x561c4ec92f90): num_active_works --> 0
wlp2s0: Setting scan request: 1.000000 sec
wlp2s0: State: DISCONNECTED -> SCANNING
wlp2s0: Starting AP scan for wildcard SSID
wlp2s0: Add radio work 'scan'@0x561c4ec92f90
wlp2s0: First radio work item in the queue - schedule start immediately
wlp2s0: Starting radio work 'scan'@0x561c4ec92f90 after 0.000023 second wait
wlp2s0: nl80211: scan request
nl80211: Scan SSID 
nl80211: Scan extra IEs - hexdump(len=2): 72 00
nl80211: Scan trigger failed: ret=-22 (Invalid argument)
wlp2s0: State: SCANNING -> DISCONNECTED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=5 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp2s0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
wlp2s0: Radio work 'scan'@0x561c4ec92f90 done in 0.000217 seconds
wlp2s0: radio_work_free('scan'@0x561c4ec92f90): num_active_works --> 0
wlp2s0: Setting scan request: 1.000000 sec
wlp2s0: State: DISCONNECTED -> SCANNING
wlp2s0: Starting AP scan for wildcard SSID
wlp2s0: Add radio work 'scan'@0x561c4ec92f90
wlp2s0: First radio work item in the queue - schedule start immediately
wlp2s0: Starting radio work 'scan'@0x561c4ec92f90 after 0.000022 second wait
wlp2s0: nl80211: scan request
nl80211: Scan SSID 
nl80211: Scan extra IEs - hexdump(len=2): 72 00
nl80211: Scan trigger failed: ret=-22 (Invalid argument)
wlp2s0: State: SCANNING -> DISCONNECTED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=5 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp2s0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
wlp2s0: Radio work 'scan'@0x561c4ec92f90 done in 0.000216 seconds
wlp2s0: radio_work_free('scan'@0x561c4ec92f90): num_active_works --> 0
wlp2s0: Setting scan request: 1.000000 sec
wlp2s0: State: DISCONNECTED -> SCANNING
wlp2s0: Starting AP scan for wildcard SSID
wlp2s0: Add radio work 'scan'@0x561c4ec92f90
wlp2s0: First radio work item in the queue - schedule start immediately
wlp2s0: Starting radio work 'scan'@0x561c4ec92f90 after 0.000028 second wait
wlp2s0: nl80211: scan request
nl80211: Scan SSID 
nl80211: Scan extra IEs - hexdump(len=2): 72 00
nl80211: Scan trigger failed: ret=-22 (Invalid argument)
wlp2s0: State: SCANNING -> DISCONNECTED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=5 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlp2s0: CTRL-EVENT-SCAN-FAILED ret=-22 retry=1
wlp2s0: Radio work 'scan'@0x561c4ec92f90 done in 0.000220 seconds
wlp2s0: radio_work_free('scan'@0x561c4ec92f90): num_active_works --> 0
wlp2s0: Setting scan request: 1.000000 sec
wlp2s0: Removing interface wlp2s0
wlp2s0: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 (DEAUTH_LEAVING) state=DISCONNECTED
TDLS: Tear down peers
nl80211: Data frame filter flags=0x0
wlp2s0: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlp2s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=5 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wlp2s0: WPA: Clear old PMK and PTK
wlp2s0: Cancelling scan request
wlp2s0: Cancelling authentication timeout
Off-channel: Clear pending Action frame TX (pending_action_tx=(nil)
nl80211: Data frame filter flags=0x0
HS20: Delete all stored icons
Off-channel: Action frame sequence done notification: pending_action_tx=(nil) drv_offchan_tx=0 action_tx_wait_time=0 off_channel_freq=0 roc_waiting_drv_freq=0
Remove interface wlp2s0 from radio phy1
Remove radio phy1
nl80211: deinit ifname=wlp2s0 disabled_11b_rates=0
nl80211: Remove monitor interface: refcount=0
netlink: Operstate: ifindex=5 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP)
nl80211: Set mode ifindex 5 iftype 2 (STATION)
nl80211: Unsubscribe mgmt frames handle 0x8888de94c64ec8a9 (mode change)
wlp2s0: CTRL-EVENT-TERMINATING