Cpu speed from cpuinfo 2807.00Mhz
cpuinfo might be wrong if cpufreq is enabled. To guess correctly try estimating via tsc
Linux's inbuilt cpu_khz code emulated now
True Frequency (without accounting Turbo) 2807 MHz
  CPU Multiplier 28x || Bus clock frequency (BCLK) 100.25 MHz

Socket [0] - [physical cores=2, logical cores=4, max online cores ever=2]
  TURBO ENABLED on 2 Cores, Hyper Threading ON
  Max Frequency without considering Turbo 2907.25 MHz (100.25 x [29])
  Max TURBO Multiplier (if Enabled) with 1/2/3/4 Cores is  34x/32x/32x/32x
  Real Current Frequency 398.99 MHz [100.25 x 3.98] (Max of below)
        Core [core-id]  :Actual Freq (Mult.)      C0%   Halt(C1)%  C3 %   C6 %  Temp      VCore
        Core 1 [0]:       398.95 (3.98x)        13.3      74       1    23.1    34      0.6877
        Core 2 [1]:       398.99 (3.98x)        13.7    86.5       1    10.5    36      0.6876





C0 = Processor running without halting
C1 = Processor running with halts (States >C0 are power saver modes with cores idling)
C3 = Cores running with PLL turned off and core cache turned off
C6, C7 = Everything in C3 + core state saved to last level cache, C7 is deeper than C6
  Above values in table are in percentage over the last 1 sec
[core-id] refers to core-id number in /proc/cpuinfo
'Garbage Values' message printed when garbage values are read