#! /bin/sh
set -e

# grub-mkconfig helper script.
# Copyright (C) 2006,2007,2008,2009,2010  Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB.  If not, see <http://www.gnu.org/licenses/>.

prefix="/usr"
exec_prefix="/usr"
datarootdir="/usr/share"
grub_lang=`echo $LANG | cut -d . -f 1`

export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"

. "$pkgdatadir/grub-mkconfig_lib"

# Do this as early as possible, since other commands might depend on it.
# (e.g. the `loadfont' command might need lvm or raid modules)
for i in ${GRUB_PRELOAD_MODULES} ; do
  echo "insmod $i"
done

if [ "x${GRUB_DEFAULT}" = "x" ] ; then GRUB_DEFAULT=0 ; fi
if [ "x${GRUB_DEFAULT}" = "xsaved" ] ; then GRUB_DEFAULT='${saved_entry}' ; fi
if [ "x${GRUB_TIMEOUT}" = "x" ] ; then GRUB_TIMEOUT=5 ; fi
if [ "x${GRUB_GFXMODE}" = "x" ] ; then GRUB_GFXMODE=auto ; fi

if [ "x${GRUB_DEFAULT_BUTTON}" = "x" ] ; then GRUB_DEFAULT_BUTTON="$GRUB_DEFAULT" ; fi
if [ "x${GRUB_DEFAULT_BUTTON}" = "xsaved" ] ; then GRUB_DEFAULT_BUTTON='${saved_entry}' ; fi
if [ "x${GRUB_TIMEOUT_BUTTON}" = "x" ] ; then GRUB_TIMEOUT_BUTTON="$GRUB_TIMEOUT" ; fi

cat << EOF
if [ -s \$prefix/grubenv ]; then
  load_env
fi
EOF
if [ "x$GRUB_BUTTON_CMOS_ADDRESS" != "x" ]; then
    cat <<EOF
if cmostest $GRUB_BUTTON_CMOS_ADDRESS ; then
   set default="${GRUB_DEFAULT_BUTTON}"
elif [ "\${next_entry}" ] ; then
   set default="\${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="${GRUB_DEFAULT}"
fi
EOF
else
    cat <<EOF
if [ "\${next_entry}" ] ; then
   set default="\${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="${GRUB_DEFAULT}"
fi
EOF
fi
cat <<EOF

if [ x"\${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "\${prev_saved_entry}" ]; then
  set saved_entry="\${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "\${boot_once}" ]; then
    saved_entry="\${chosen}"
    save_env saved_entry
  fi
}

function load_video {
EOF
if [ -n "${GRUB_VIDEO_BACKEND}" ]; then
    cat <<EOF
  insmod ${GRUB_VIDEO_BACKEND}
EOF
else
# If all_video.mod isn't available load all modules available
# with versions prior to introduction of all_video.mod
cat <<EOF
  if [ x\$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
EOF
fi
cat <<EOF
}

EOF

if [ x$GRUB_COLOR_NORMAL != x ] && [ x$GRUB_COLOR_HIGHLIGHT != x ] ; then
    cat << EOF
set menu_color_normal=$GRUB_COLOR_NORMAL
set menu_color_highlight=$GRUB_COLOR_HIGHLIGHT

EOF
fi

serial=0;
gfxterm=0;
for x in ${GRUB_TERMINAL_INPUT} ${GRUB_TERMINAL_OUTPUT}; do
    if [ xserial = "x$x" ]; then
	serial=1;
    fi
    if [ xgfxterm = "x$x" ]; then
	gfxterm=1;
    fi
done

if [ "x$serial" = x1 ]; then
    if [ "x${GRUB_SERIAL_COMMAND}" = "x" ] ; then
	grub_warn "$(gettext "Requested serial terminal but GRUB_SERIAL_COMMAND is unspecified. Default parameters will be used.")"
	GRUB_SERIAL_COMMAND=serial
    fi
    echo "${GRUB_SERIAL_COMMAND}"
fi

if [ "x$gfxterm" = x1 ]; then
    if [ -n "$GRUB_FONT" ] ; then
       # Make the font accessible
       prepare_grub_to_access_device `${grub_probe} --target=device "${GRUB_FONT}"`
    cat << EOF
if loadfont `make_system_path_relative_to_its_root "${GRUB_FONT}"` ; then
EOF
    else
	for dir in "${pkgdatadir}" "`echo '//boot/grub' | sed "s,//*,/,g"`" /usr/share/grub ; do
	    for basename in unicode unifont ascii; do
		path="${dir}/${basename}.pf2"
		if is_path_readable_by_grub "${path}" > /dev/null ; then
		    font_path="${path}"
		else
		    continue
		fi
		break 2
	    done
	done
	if [ -n "${font_path}" ] ; then
    cat << EOF
if [ x\$feature_default_font_path = xy ] ; then
   font=unicode
else
EOF
                # Make the font accessible
		prepare_grub_to_access_device `${grub_probe} --target=device "${font_path}"`
    cat << EOF
    font="`make_system_path_relative_to_its_root "${font_path}"`"
fi

if loadfont \$font ; then
EOF
	    else
    cat << EOF
if loadfont unicode ; then
EOF
	    fi
	fi

    cat << EOF
  set gfxmode=${GRUB_GFXMODE}
  load_video
  insmod gfxterm
EOF

# Gettext variables and module
if [ "x${LANG}" != "xC" ] &&  [ "x${LANG}" != "x" ]; then
  cat << EOF
  set locale_dir=\$prefix/locale
  set lang=${grub_lang}
  insmod gettext
EOF
fi

cat <<EOF
fi
EOF
fi

case x${GRUB_TERMINAL_INPUT} in
  x)
    # Just use the native terminal
  ;;
  x*)
    cat << EOF
terminal_input ${GRUB_TERMINAL_INPUT}
EOF
  ;;
esac

case x${GRUB_TERMINAL_OUTPUT} in
  x)
    # Just use the native terminal
  ;;
  x*)
    cat << EOF
terminal_output ${GRUB_TERMINAL_OUTPUT}
EOF
  ;;
esac

if [ "x$gfxterm" = x1 ]; then
    if [ "x$GRUB_THEME" != x ] && [ -f "$GRUB_THEME" ] \
	&& is_path_readable_by_grub "$GRUB_THEME"; then
	gettext_printf "Found theme: %s\n" "$GRUB_THEME" >&2

	prepare_grub_to_access_device `${grub_probe} --target=device "$GRUB_THEME"`
	cat << EOF
insmod gfxmenu
EOF
	themedir="`dirname "$GRUB_THEME"`"
	for x in "$themedir"/*.pf2 "$themedir"/f/*.pf2; do
	    if [ -f "$x" ]; then
		cat << EOF
loadfont (\$root)`make_system_path_relative_to_its_root $x`
EOF
	    fi
	done
	if [ x"`echo "$themedir"/*.jpg`" != x"$themedir/*.jpg" ] || [ x"`echo "$themedir"/*.jpeg`" != x"$themedir/*.jpeg" ]; then
	    cat << EOF
insmod jpeg
EOF
	fi
	if [ x"`echo "$themedir"/*.png`" != x"$themedir/*.png" ]; then
	    cat << EOF
insmod png
EOF
	fi
	if [ x"`echo "$themedir"/*.tga`" != x"$themedir/*.tga" ]; then
	    cat << EOF
insmod tga
EOF
	fi
	    
	cat << EOF
set theme=(\$root)`make_system_path_relative_to_its_root $GRUB_THEME`
export theme
EOF
    elif [ "x$GRUB_BACKGROUND" != x ] && [ -f "$GRUB_BACKGROUND" ] \
	    && is_path_readable_by_grub "$GRUB_BACKGROUND"; then
	gettext_printf "Found background: %s\n" "$GRUB_BACKGROUND" >&2
	case "$GRUB_BACKGROUND" in 
	    *.png)         reader=png ;;
	    *.tga)         reader=tga ;;
	    *.jpg|*.jpeg)  reader=jpeg ;;
	    *)             gettext "Unsupported image format" >&2; echo >&2; exit 1 ;;
	esac
	prepare_grub_to_access_device `${grub_probe} --target=device "$GRUB_BACKGROUND"`
	cat << EOF
insmod $reader
background_image -m stretch `make_system_path_relative_to_its_root "$GRUB_BACKGROUND"`
EOF
    fi
fi

make_timeout ()
{
    if [ "x${3}" != "x" ] ; then
	timeout="${2}"
	style="${3}"
    elif [ "x${1}" != "x" ] && [ "x${1}" != "x0" ] ; then
	# Handle the deprecated GRUB_HIDDEN_TIMEOUT scheme.
	timeout="${1}"
	if [ "x${2}" != "x0" ] ; then
	    grub_warn "$(gettext "Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported.")"
	fi
	if [ "x${GRUB_HIDDEN_TIMEOUT_QUIET}" = "xtrue" ] ; then
	    style="hidden"
	    verbose=
	else
	    style="countdown"
	    verbose=" --verbose"
	fi
    else
	# No hidden timeout, so treat as GRUB_TIMEOUT_STYLE=menu
	timeout="${2}"
	style="menu"
    fi
    cat << EOF
if [ x\$feature_timeout_style = xy ] ; then
  set timeout_style=${style}
  set timeout=${timeout}
EOF
    if [ "x${style}" = "xmenu" ] ; then
	cat << EOF
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
  set timeout=${timeout}
EOF
    else
	cat << EOF
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep${verbose} --interruptible ${timeout} ; then
  set timeout=0
EOF
    fi
    cat << EOF
fi
EOF
}

if [ "x$GRUB_BUTTON_CMOS_ADDRESS" != "x" ]; then
    cat <<EOF
if cmostest $GRUB_BUTTON_CMOS_ADDRESS ; then
EOF
make_timeout "${GRUB_HIDDEN_TIMEOUT_BUTTON}" "${GRUB_TIMEOUT_BUTTON}" "${GRUB_TIMEOUT_STYLE_BUTTON}"
echo else
make_timeout "${GRUB_HIDDEN_TIMEOUT}" "${GRUB_TIMEOUT}" "${GRUB_TIMEOUT_STYLE}"
echo fi
else
make_timeout "${GRUB_HIDDEN_TIMEOUT}" "${GRUB_TIMEOUT}" "${GRUB_TIMEOUT_STYLE}"
fi

if [ "x$GRUB_BUTTON_CMOS_ADDRESS" != "x" ] && [ "x$GRUB_BUTTON_CMOS_CLEAN" = "xyes" ]; then
    cat <<EOF
cmosclean $GRUB_BUTTON_CMOS_ADDRESS
EOF
fi

# Play an initial tune
if [ "x${GRUB_INIT_TUNE}" != "x" ] ; then
  echo "play ${GRUB_INIT_TUNE}"
fi

if [ "x${GRUB_BADRAM}" != "x" ] ; then
  echo "badram ${GRUB_BADRAM}"
fi
#! /bin/sh
set -e

# grub-mkconfig helper script.
# Copyright (C) 2006,2007,2008,2009,2010  Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB.  If not, see <http://www.gnu.org/licenses/>.

prefix="/usr"
exec_prefix="/usr"
datarootdir="/usr/share"

. "$pkgdatadir/grub-mkconfig_lib"

export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"

CLASS="--class gnu-linux --class gnu --class os"

if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then
  OS=Linux
else
  OS="${GRUB_DISTRIBUTOR} Linux"
  CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1|LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}"
fi

# loop-AES arranges things so that /dev/loop/X can be our root device, but
# the initrds that Linux uses don't like that.
case ${GRUB_DEVICE} in
  /dev/loop/*|/dev/loop[0-9])
    GRUB_DEVICE=`losetup ${GRUB_DEVICE} | sed -e "s/^[^(]*(\([^)]\+\)).*/\1/"`
  ;;
esac

# btrfs may reside on multiple devices. We cannot pass them as value of root= parameter
# and mounting btrfs requires user space scanning, so force UUID in this case.
if [ "x${GRUB_DEVICE_UUID}" = "x" ] || [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ] \
    || ! test -e "/dev/disk/by-uuid/${GRUB_DEVICE_UUID}" \
    || ( test -e "${GRUB_DEVICE}" && uses_abstraction "${GRUB_DEVICE}" lvm ); then
  LINUX_ROOT_DEVICE=${GRUB_DEVICE}
else
  LINUX_ROOT_DEVICE=UUID=${GRUB_DEVICE_UUID}
fi

case x"$GRUB_FS" in
    xbtrfs)
	rootsubvol="`make_system_path_relative_to_its_root /`"
	rootsubvol="${rootsubvol#/}"
	if [ "x${rootsubvol}" != x ]; then
	    GRUB_CMDLINE_LINUX="rootflags=subvol=${rootsubvol} ${GRUB_CMDLINE_LINUX}"
	fi;;
    xzfs)
	rpool=`${grub_probe} --device ${GRUB_DEVICE} --target=fs_label 2>/dev/null || true`
	bootfs="`make_system_path_relative_to_its_root / | sed -e "s,@$,,"`"
	LINUX_ROOT_DEVICE="ZFS=${rpool}${bootfs}"
	;;
esac

title_correction_code=

linux_entry ()
{
  os="$1"
  version="$2"
  type="$3"
  args="$4"

  if [ -z "$boot_device_id" ]; then
      boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
  fi
  if [ x$type != xsimple ] ; then
      case $type in
	  recovery)
	      title="$(gettext_printf "%s, with Linux %s (recovery mode)" "${os}" "${version}")" ;;
	  fallback)
	      title="$(gettext_printf "%s, with Linux %s (fallback initramfs)" "${os}" "${version}")" ;;
	  *)
	      title="$(gettext_printf "%s, with Linux %s" "${os}" "${version}")" ;;
      esac
      if [ x"$title" = x"$GRUB_ACTUAL_DEFAULT" ] || [ x"Previous Linux versions>$title" = x"$GRUB_ACTUAL_DEFAULT" ]; then
	  replacement_title="$(echo "Advanced options for ${OS}" | sed 's,>,>>,g')>$(echo "$title" | sed 's,>,>>,g')"
	  quoted="$(echo "$GRUB_ACTUAL_DEFAULT" | grub_quote)"
	  title_correction_code="${title_correction_code}if [ \"x\$default\" = '$quoted' ]; then default='$(echo "$replacement_title" | grub_quote)'; fi;"
	  grub_warn "$(gettext_printf "Please don't use old title \`%s' for GRUB_DEFAULT, use \`%s' (for versions before 2.00) or \`%s' (for 2.00 or later)" "$GRUB_ACTUAL_DEFAULT" "$replacement_title" "gnulinux-advanced-$boot_device_id>gnulinux-$version-$type-$boot_device_id")"
      fi
      echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} \$menuentry_id_option 'gnulinux-$version-$type-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
  else
      echo "menuentry '$(echo "$os" | grub_quote)' ${CLASS} \$menuentry_id_option 'gnulinux-simple-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
  fi      
  if [ x$type != xrecovery ] ; then
      save_default_entry | grub_add_tab
  fi

  # Use ELILO's generic "efifb" when it's known to be available.
  # FIXME: We need an interface to select vesafb in case efifb can't be used.
  if [ "x$GRUB_GFXPAYLOAD_LINUX" = x ]; then
      echo "	load_video" | sed "s/^/$submenu_indentation/"
      if grep -qx "CONFIG_FB_EFI=y" "${config}" 2> /dev/null \
	  && grep -qx "CONFIG_VT_HW_CONSOLE_BINDING=y" "${config}" 2> /dev/null; then
	  echo "	set gfxpayload=keep" | sed "s/^/$submenu_indentation/"
      fi
  else
      if [ "x$GRUB_GFXPAYLOAD_LINUX" != xtext ]; then
	  echo "	load_video" | sed "s/^/$submenu_indentation/"
      fi
      echo "	set gfxpayload=$GRUB_GFXPAYLOAD_LINUX" | sed "s/^/$submenu_indentation/"
  fi

  echo "	insmod gzio" | sed "s/^/$submenu_indentation/"

  if [ x$dirname = x/ ]; then
    if [ -z "${prepare_root_cache}" ]; then
      prepare_root_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE} | grub_add_tab)"
    fi
    printf '%s\n' "${prepare_root_cache}" | sed "s/^/$submenu_indentation/"
  else
    if [ -z "${prepare_boot_cache}" ]; then
      prepare_boot_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE_BOOT} | grub_add_tab)"
    fi
    printf '%s\n' "${prepare_boot_cache}" | sed "s/^/$submenu_indentation/"
  fi
  message="$(gettext_printf "Loading Linux %s ..." ${version})"
  sed "s/^/$submenu_indentation/" << EOF
	echo	'$(echo "$message" | grub_quote)'
	linux	${rel_dirname}/${basename} root=${linux_root_device_thisversion} rw ${args}
EOF
  if test -n "${initrd}" -o -n "${initrd_extra}" ; then
    # TRANSLATORS: ramdisk isn't identifier. Should be translated.
    message="$(gettext_printf "Loading initial ramdisk ...")"
    printf '	%s\n' "echo	'$(echo "$message" | grub_quote)'" | sed "s/^/$submenu_indentation/"
    printf '	%s ' 'initrd' | sed "s/^/$submenu_indentation/"
    for i in ${initrd_extra} ${initrd}; do
	printf ' %s/%s' "${rel_dirname}" "${i}"
    done
    printf '\n'
  fi
  sed "s/^/$submenu_indentation/" << EOF
}
EOF
}

machine=`uname -m`
case "x$machine" in
    xi?86 | xx86_64)
	list=
	for i in /boot/vmlinuz-* /vmlinuz-* /boot/kernel-* ; do
	    if grub_file_is_not_garbage "$i" ; then list="$list $i" ; fi
	done ;;
    *) 
	list=
	for i in /boot/vmlinuz-* /boot/vmlinux-* /vmlinuz-* /vmlinux-* /boot/kernel-* ; do
                  if grub_file_is_not_garbage "$i" ; then list="$list $i" ; fi
	done ;;
esac

case "$machine" in
    i?86) GENKERNEL_ARCH="x86" ;;
    mips|mips64) GENKERNEL_ARCH="mips" ;;
    mipsel|mips64el) GENKERNEL_ARCH="mipsel" ;;
    arm*) GENKERNEL_ARCH="arm" ;;
    *) GENKERNEL_ARCH="$machine" ;;
esac

prepare_boot_cache=
prepare_root_cache=
boot_device_id=
title_correction_code=

# Extra indentation to add to menu entries in a submenu. We're not in a submenu
# yet, so it's empty. In a submenu it will be equal to '\t' (one tab).
submenu_indentation=""

is_top_level=true
while [ "x$list" != "x" ] ; do
  linux=`version_find_latest $list`
  gettext_printf "Found linux image: %s\n" "$linux" >&2
  basename=`basename $linux`
  dirname=`dirname $linux`
  rel_dirname=`make_system_path_relative_to_its_root $dirname`
  version=`echo $basename | sed -e "s,vmlinuz-,,g"`
  alt_version=`echo $version | sed -e "s,\.old$,,g"`
  linux_root_device_thisversion="${LINUX_ROOT_DEVICE}"

  initrd=
  for i in "initrd.img-${version}" "initrd-${version}.img" "initrd-${version}.gz" \
	   "initrd-${version}" "initramfs-${version}.img" \
	   "initrd.img-${alt_version}" "initrd-${alt_version}.img" \
	   "initrd-${alt_version}" "initramfs-${alt_version}.img" \
	   "initramfs-genkernel-${version}" \
	   "initramfs-genkernel-${alt_version}" \
	   "initramfs-genkernel-${GENKERNEL_ARCH}-${version}" \
	   "initramfs-genkernel-${GENKERNEL_ARCH}-${alt_version}"; do
    if test -e "${dirname}/${i}" ; then
      initrd="$i"
      break
    fi
  done
  initrd_extra=
  for i in intel-ucode.img; do
    if test -e "${dirname}/${i}" ; then
      initrd_extra="${initrd_extra} ${i}"
    fi
  done

  config=
  for i in "${dirname}/config-${version}" "${dirname}/config-${alt_version}" "/etc/kernels/kernel-config-${version}" ; do
    if test -e "${i}" ; then
      config="${i}"
      break
    fi
  done

  initramfs=
  if test -n "${config}" ; then
      initramfs=`grep CONFIG_INITRAMFS_SOURCE= "${config}" | cut -f2 -d= | tr -d \"`
  fi

  if test -n "${initrd}" -o -n "${initrd_extra}" ; then
    gettext_printf "Found initrd image(s) in %s:%s\n" "${dirname}" "${initrd_extra} ${initrd}" >&2
  elif test -z "${initramfs}" ; then
    # "UUID=" and "ZFS=" magic is parsed by initrd or initramfs.  Since there's
    # no initrd or builtin initramfs, it can't work here.
    linux_root_device_thisversion=${GRUB_DEVICE}
  fi

  if [ "x$is_top_level" = xtrue ] && [ "x${GRUB_DISABLE_SUBMENU}" != xy ]; then
    linux_entry "${OS}" "${version}" simple \
    "${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"

    submenu_indentation="$grub_tab"
    
    if [ -z "$boot_device_id" ]; then
	boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
    fi
    # TRANSLATORS: %s is replaced with an OS name
    echo "submenu '$(gettext_printf "Advanced options for %s" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {"
    is_top_level=false
  fi

  linux_entry "${OS}" "${version}" advanced \
              "${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"

  if test -e "${dirname}/initramfs-${version}-fallback.img" ; then
    initrd="initramfs-${version}-fallback.img"

    if test -n "${initrd}" ; then
      gettext_printf "Found fallback initrd image(s) in %s:%s\n" "${dirname}" "${initrd_extra} ${initrd}" >&2
    fi

    linux_entry "${OS}" "${version}" fallback \
                "${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}"
  fi

  if [ "x${GRUB_DISABLE_RECOVERY}" != "xtrue" ]; then
    linux_entry "${OS}" "${version}" recovery \
                "single ${GRUB_CMDLINE_LINUX}"
  fi

  list=`echo $list | tr ' ' '\n' | fgrep -vx "$linux" | tr '\n' ' '`
done

# If at least one kernel was found, then we need to
# add a closing '}' for the submenu command.
if [ x"$is_top_level" != xtrue ]; then
  echo '}'
fi

echo "$title_correction_code"
#! /bin/sh
set -e

# grub-mkconfig helper script.
# Copyright (C) 2006,2007,2008,2009,2010  Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB.  If not, see <http://www.gnu.org/licenses/>.

prefix="/usr"
exec_prefix="/usr"
datarootdir="/usr/share"

. "$pkgdatadir/grub-mkconfig_lib"

export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"

CLASS="--class gnu-linux --class gnu --class os --class xen"

if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then
  OS=GNU/Linux
else
  OS="${GRUB_DISTRIBUTOR} GNU/Linux"
  CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1|LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}"
fi

# loop-AES arranges things so that /dev/loop/X can be our root device, but
# the initrds that Linux uses don't like that.
case ${GRUB_DEVICE} in
  /dev/loop/*|/dev/loop[0-9])
    GRUB_DEVICE=`losetup ${GRUB_DEVICE} | sed -e "s/^[^(]*(\([^)]\+\)).*/\1/"`
  ;;
esac

# btrfs may reside on multiple devices. We cannot pass them as value of root= parameter
# and mounting btrfs requires user space scanning, so force UUID in this case.
if [ "x${GRUB_DEVICE_UUID}" = "x" ] || [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ] \
    || ! test -e "/dev/disk/by-uuid/${GRUB_DEVICE_UUID}" \
    || ( test -e "${GRUB_DEVICE}" && uses_abstraction "${GRUB_DEVICE}" lvm ); then
  LINUX_ROOT_DEVICE=${GRUB_DEVICE}
else
  LINUX_ROOT_DEVICE=UUID=${GRUB_DEVICE_UUID}
fi

# Allow overriding GRUB_CMDLINE_LINUX and GRUB_CMDLINE_LINUX_DEFAULT.
if [ "${GRUB_CMDLINE_LINUX_XEN_REPLACE}" ]; then
  GRUB_CMDLINE_LINUX="${GRUB_CMDLINE_LINUX_XEN_REPLACE}"
fi
if [ "${GRUB_CMDLINE_LINUX_XEN_REPLACE_DEFAULT}" ]; then
  GRUB_CMDLINE_LINUX_DEFAULT="${GRUB_CMDLINE_LINUX_XEN_REPLACE_DEFAULT}"
fi

case x"$GRUB_FS" in
    xbtrfs)
	rootsubvol="`make_system_path_relative_to_its_root /`"
	rootsubvol="${rootsubvol#/}"
	if [ "x${rootsubvol}" != x ]; then
	    GRUB_CMDLINE_LINUX="rootflags=subvol=${rootsubvol} ${GRUB_CMDLINE_LINUX}"
	fi;;
    xzfs)
	rpool=`${grub_probe} --device ${GRUB_DEVICE} --target=fs_label 2>/dev/null || true`
	bootfs="`make_system_path_relative_to_its_root / | sed -e "s,@$,,"`"
	LINUX_ROOT_DEVICE="ZFS=${rpool}${bootfs}"
	;;
esac

title_correction_code=

linux_entry ()
{
  os="$1"
  version="$2"
  xen_version="$3"
  type="$4"
  args="$5"
  xen_args="$6"
  if [ -z "$boot_device_id" ]; then
      boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
  fi
  if [ x$type != xsimple ] ; then
      if [ x$type = xrecovery ] ; then
	  title="$(gettext_printf "%s, with Xen %s and Linux %s (recovery mode)" "${os}" "${xen_version}" "${version}")"
      else
	  title="$(gettext_printf "%s, with Xen %s and Linux %s" "${os}" "${xen_version}" "${version}")"
      fi
      replacement_title="$(echo "Advanced options for ${OS}" | sed 's,>,>>,g')>$(echo "$title" | sed 's,>,>>,g')"
      if [ x"Xen ${xen_version}>$title" = x"$GRUB_ACTUAL_DEFAULT" ]; then
         quoted="$(echo "$GRUB_ACTUAL_DEFAULT" | grub_quote)"
         title_correction_code="${title_correction_code}if [ \"x\$default\" = '$quoted' ]; then default='$(echo "$replacement_title" | grub_quote)'; fi;"
         grub_warn "$(gettext_printf "Please don't use old title \`%s' for GRUB_DEFAULT, use \`%s' (for versions before 2.00) or \`%s' (for 2.00 or later)" "$GRUB_ACTUAL_DEFAULT" "$replacement_title" "gnulinux-advanced-$boot_device_id>gnulinux-$version-$type-$boot_device_id")"
      fi
      echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} \$menuentry_id_option 'xen-gnulinux-$version-$type-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
  else
      title="$(gettext_printf "%s, with Xen hypervisor" "${os}")"
      echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} \$menuentry_id_option 'xen-gnulinux-simple-$boot_device_id' {" | sed "s/^/$submenu_indentation/"
  fi
  if [ x$type != xrecovery ] ; then
      save_default_entry | grub_add_tab | sed "s/^/$submenu_indentation/"
  fi

  if [ -z "${prepare_boot_cache}" ]; then
    prepare_boot_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE_BOOT} | grub_add_tab)"
  fi
  printf '%s\n' "${prepare_boot_cache}" | sed "s/^/$submenu_indentation/"
  xmessage="$(gettext_printf "Loading Xen %s ..." ${xen_version})"
  lmessage="$(gettext_printf "Loading Linux %s ..." ${version})"
  sed "s/^/$submenu_indentation/" << EOF
	echo	'$(echo "$xmessage" | grub_quote)'
        if [ "\$grub_platform" = "pc" -o "\$grub_platform" = "" ]; then
            xen_rm_opts=
        else
            xen_rm_opts="no-real-mode edd=off"
        fi
	multiboot	${rel_xen_dirname}/${xen_basename} placeholder ${xen_args} \${xen_rm_opts}
	echo	'$(echo "$lmessage" | grub_quote)'
	module	${rel_dirname}/${basename} placeholder root=${linux_root_device_thisversion} ro ${args}
EOF
  if test -n "${initrd}" ; then
    # TRANSLATORS: ramdisk isn't identifier. Should be translated.
    message="$(gettext_printf "Loading initial ramdisk ...")"
    sed "s/^/$submenu_indentation/" << EOF
	echo	'$(echo "$message" | grub_quote)'
	module	--nounzip   ${rel_dirname}/${initrd}
EOF
  fi
  sed "s/^/$submenu_indentation/" << EOF
}
EOF
}

linux_list=
for i in /boot/vmlinu[xz]-* /vmlinu[xz]-* /boot/kernel-*; do
    if grub_file_is_not_garbage "$i"; then
    	basename=$(basename $i)
	version=$(echo $basename | sed -e "s,^[^0-9]*-,,g")
	dirname=$(dirname $i)
	config=
	for j in "${dirname}/config-${version}" "${dirname}/config-${alt_version}" "/etc/kernels/kernel-config-${version}" ; do
	    if test -e "${j}" ; then
		config="${j}"
		break
	    fi
	done
        if (grep -qx "CONFIG_XEN_DOM0=y" "${config}" 2> /dev/null || grep -qx "CONFIG_XEN_PRIVILEGED_GUEST=y" "${config}" 2> /dev/null); then linux_list="$linux_list $i" ; fi
    fi
done
if [ "x${linux_list}" = "x" ] ; then
    exit 0
fi

file_is_not_sym () {
    case "$1" in
	*/xen-syms-*)
	    return 1;;
	*)
	    return 0;;
    esac
}

xen_list=
for i in /boot/xen*; do
    if grub_file_is_not_garbage "$i" && file_is_not_sym "$i" ; then xen_list="$xen_list $i" ; fi
done
prepare_boot_cache=
boot_device_id=

title_correction_code=

machine=`uname -m`

case "$machine" in
    i?86) GENKERNEL_ARCH="x86" ;;
    mips|mips64) GENKERNEL_ARCH="mips" ;;
    mipsel|mips64el) GENKERNEL_ARCH="mipsel" ;;
    arm*) GENKERNEL_ARCH="arm" ;;
    *) GENKERNEL_ARCH="$machine" ;;
esac

# Extra indentation to add to menu entries in a submenu. We're not in a submenu
# yet, so it's empty. In a submenu it will be equal to '\t' (one tab).
submenu_indentation=""

is_top_level=true

while [ "x${xen_list}" != "x" ] ; do
    list="${linux_list}"
    current_xen=`version_find_latest $xen_list`
    xen_basename=`basename ${current_xen}`
    xen_dirname=`dirname ${current_xen}`
    rel_xen_dirname=`make_system_path_relative_to_its_root $xen_dirname`
    xen_version=`echo $xen_basename | sed -e "s,.gz$,,g;s,^xen-,,g"`
    if [ -z "$boot_device_id" ]; then
	boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
    fi
    if [ "x$is_top_level" != xtrue ]; then
	echo "	submenu '$(gettext_printf "Xen hypervisor, version %s" "${xen_version}" | grub_quote)' \$menuentry_id_option 'xen-hypervisor-$xen_version-$boot_device_id' {"
    fi
    while [ "x$list" != "x" ] ; do
	linux=`version_find_latest $list`
	gettext_printf "Found linux image: %s\n" "$linux" >&2
	basename=`basename $linux`
	dirname=`dirname $linux`
	rel_dirname=`make_system_path_relative_to_its_root $dirname`
	version=`echo $basename | sed -e "s,^[^0-9]*-,,g"`
	alt_version=`echo $version | sed -e "s,\.old$,,g"`
	linux_root_device_thisversion="${LINUX_ROOT_DEVICE}"

	initrd=
	for i in "initrd.img-${version}" "initrd-${version}.img" "initrd-${version}.gz" \
	   "initrd-${version}" "initramfs-${version}.img" \
	   "initrd.img-${alt_version}" "initrd-${alt_version}.img" \
	   "initrd-${alt_version}" "initramfs-${alt_version}.img" \
	   "initramfs-genkernel-${version}" \
	   "initramfs-genkernel-${alt_version}" \
	   "initramfs-genkernel-${GENKERNEL_ARCH}-${version}" \
	   "initramfs-genkernel-${GENKERNEL_ARCH}-${alt_version}" ; do
	    if test -e "${dirname}/${i}" ; then
		initrd="$i"
		break
	    fi
	done
	if test -n "${initrd}" ; then
	    gettext_printf "Found initrd image: %s\n" "${dirname}/${initrd}" >&2
	else
    # "UUID=" magic is parsed by initrds.  Since there's no initrd, it can't work here.
	    linux_root_device_thisversion=${GRUB_DEVICE}
	fi

	if [ "x$is_top_level" = xtrue ] && [ "x${GRUB_DISABLE_SUBMENU}" != xy ]; then
	    linux_entry "${OS}" "${version}" "${xen_version}" simple \
		"${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}"

	    submenu_indentation="$grub_tab$grub_tab"
    
	    if [ -z "$boot_device_id" ]; then
		boot_device_id="$(grub_get_device_id "${GRUB_DEVICE}")"
	    fi
            # TRANSLATORS: %s is replaced with an OS name
	    echo "submenu '$(gettext_printf "Advanced options for %s (with Xen hypervisor)" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {"
	echo "	submenu '$(gettext_printf "Xen hypervisor, version %s" "${xen_version}" | grub_quote)' \$menuentry_id_option 'xen-hypervisor-$xen_version-$boot_device_id' {"
	   is_top_level=false
	fi

	linux_entry "${OS}" "${version}" "${xen_version}" advanced \
	    "${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}"
	if [ "x${GRUB_DISABLE_RECOVERY}" != "xtrue" ]; then
	    linux_entry "${OS}" "${version}" "${xen_version}" recovery \
		"single ${GRUB_CMDLINE_LINUX}" "${GRUB_CMDLINE_XEN}"
	fi

	list=`echo $list | tr ' ' '\n' | fgrep -vx "$linux" | tr '\n' ' '`
    done
    if [ x"$is_top_level" != xtrue ]; then
	echo '	}'
    fi
    xen_list=`echo $xen_list | tr ' ' '\n' | fgrep -vx "$current_xen" | tr '\n' ' '`
done

# If at least one kernel was found, then we need to
# add a closing '}' for the submenu command.
if [ x"$is_top_level" != xtrue ]; then
  echo '}'
fi

echo "$title_correction_code"
#! /bin/sh
set -e

# grub-mkconfig helper script.
# Copyright (C) 2006,2007,2008,2009  Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB.  If not, see <http://www.gnu.org/licenses/>.

prefix="/usr"
exec_prefix="/usr"
datarootdir="/usr/share"

export TEXTDOMAIN=grub
export TEXTDOMAINDIR="${datarootdir}/locale"

. "$pkgdatadir/grub-mkconfig_lib"

if [ "x${GRUB_DISABLE_OS_PROBER}" = "xtrue" ]; then
  exit 0
fi

if [ -z "`which os-prober 2> /dev/null`" ] || [ -z "`which linux-boot-prober 2> /dev/null`" ] ; then
  # missing os-prober and/or linux-boot-prober
  exit 0
fi

OSPROBED="`os-prober | tr ' ' '^' | paste -s -d ' '`"
if [ -z "${OSPROBED}" ] ; then
  # empty os-prober output, nothing doing
  exit 0
fi

osx_entry() {
    if [ x$2 = x32 ]; then
        # TRANSLATORS: it refers to kernel architecture (32-bit)
	bitstr="$(gettext "(32-bit)")"
    else
        # TRANSLATORS: it refers to kernel architecture (64-bit)
	bitstr="$(gettext "(64-bit)")"
    fi
    # TRANSLATORS: it refers on the OS residing on device %s
    onstr="$(gettext_printf "(on %s)" "${DEVICE}")"
        cat << EOF
menuentry '$(echo "${LONGNAME} $bitstr $onstr" | grub_quote)' --class osx --class darwin --class os \$menuentry_id_option 'osprober-xnu-$2-$(grub_get_device_id "${DEVICE}")'  {
EOF
	save_default_entry | grub_add_tab
	prepare_grub_to_access_device ${DEVICE} | grub_add_tab
	cat << EOF
        load_video
        set do_resume=0
        if [ /var/vm/sleepimage -nt10 / ]; then
           if xnu_resume /var/vm/sleepimage; then
             set do_resume=1
           fi
        fi
        if [ \$do_resume = 0 ]; then
           xnu_uuid ${OSXUUID} uuid
           if [ -f /Extra/DSDT.aml ]; then
              acpi -e /Extra/DSDT.aml
           fi
           if [ /kernelcache -nt /System/Library/Extensions ]; then
              $1 /kernelcache boot-uuid=\${uuid} rd=*uuid
           elif [ -f /System/Library/Kernels/kernel ]; then
              $1 /System/Library/Kernels/kernel boot-uuid=\${uuid} rd=*uuid
              xnu_kextdir /System/Library/Extensions
           else
              $1 /mach_kernel boot-uuid=\${uuid} rd=*uuid
              if [ /System/Library/Extensions.mkext -nt /System/Library/Extensions ]; then
                xnu_mkext /System/Library/Extensions.mkext
              else
                xnu_kextdir /System/Library/Extensions
              fi
           fi
           if [ -f /Extra/Extensions.mkext ]; then
              xnu_mkext /Extra/Extensions.mkext
           fi
           if [ -d /Extra/Extensions ]; then
              xnu_kextdir /Extra/Extensions
           fi
           if [ -f /Extra/devprop.bin ]; then
              xnu_devprop_load /Extra/devprop.bin
           fi
           if [ -f /Extra/splash.jpg ]; then
              insmod jpeg
              xnu_splash /Extra/splash.jpg
           fi
           if [ -f /Extra/splash.png ]; then
              insmod png
              xnu_splash /Extra/splash.png
           fi
           if [ -f /Extra/splash.tga ]; then
              insmod tga
              xnu_splash /Extra/splash.tga
           fi
        fi
}
EOF
}

used_osprober_linux_ids=

for OS in ${OSPROBED} ; do
  DEVICE="`echo ${OS} | cut -d ':' -f 1`"
  LONGNAME="`echo ${OS} | cut -d ':' -f 2 | tr '^' ' '`"
  LABEL="`echo ${OS} | cut -d ':' -f 3 | tr '^' ' '`"
  BOOT="`echo ${OS} | cut -d ':' -f 4`"
  if UUID="`${grub_probe} --target=fs_uuid --device ${DEVICE%@*}`"; then
    EXPUUID="$UUID"

    if [ x"${DEVICE#*@}" != x ] ; then
      EXPUUID="${EXPUUID}@${DEVICE#*@}"
    fi

    if [ "x${GRUB_OS_PROBER_SKIP_LIST}" != "x" ] && [ "x`echo ${GRUB_OS_PROBER_SKIP_LIST} | grep -i -e '\b'${EXPUUID}'\b'`" != "x" ] ; then
      echo "Skipped ${LONGNAME} on ${DEVICE} by user request." >&2
      continue
    fi
  fi

  BTRFS="`echo ${OS} | cut -d ':' -f 5`"
  if [ "x$BTRFS" = "xbtrfs" ]; then
	BTRFSuuid="`echo ${OS} | cut -d ':' -f 6`"
	BTRFSsubvol="`echo ${OS} | cut -d ':' -f 7`"
  fi

  if [ -z "${LONGNAME}" ] ; then
    LONGNAME="${LABEL}"
  fi

  # os-prober returns text string followed by optional counter
  CLASS="--class $(echo "${LABEL}" | LC_ALL=C sed 's,[[:digit:]]*$,,' | cut -d' ' -f1 | tr 'A-Z' 'a-z' | LC_ALL=C sed 's,[^[:alnum:]_],_,g')"

  gettext_printf "Found %s on %s\n" "${LONGNAME}" "${DEVICE}" >&2

  case ${BOOT} in
    chain)

	  onstr="$(gettext_printf "(on %s)" "${DEVICE}")"
      cat << EOF
menuentry '$(echo "${LONGNAME} $onstr" | grub_quote)' $CLASS --class os \$menuentry_id_option 'osprober-chain-$(grub_get_device_id "${DEVICE}")' {
EOF
      save_default_entry | grub_add_tab
      prepare_grub_to_access_device ${DEVICE} | grub_add_tab

      if [ x"`${grub_probe} --device ${DEVICE} --target=partmap`" = xmsdos ]; then
	  cat << EOF
	parttool \${root} hidden-
EOF
      fi

      case ${LONGNAME} in
	Windows\ Vista*|Windows\ 7*|Windows\ Server\ 2008*)
	;;
	*)
	  cat << EOF
	drivemap -s (hd0) \${root}
EOF
	;;
      esac

      cat <<EOF
	chainloader +1
}
EOF
    ;;
    efi)

	EFIPATH=${DEVICE#*@}
	DEVICE=${DEVICE%@*}
	onstr="$(gettext_printf "(on %s)" "${DEVICE}")"
      cat << EOF
menuentry '$(echo "${LONGNAME} $onstr" | grub_quote)' $CLASS --class os \$menuentry_id_option 'osprober-efi-$(grub_get_device_id "${DEVICE}")' {
EOF
      save_default_entry | sed -e "s/^/\t/"
      prepare_grub_to_access_device ${DEVICE} | sed -e "s/^/\t/"

      cat <<EOF
	chainloader ${EFIPATH}
}
EOF
    ;;
    linux)
      if [ "x$BTRFS" = "xbtrfs" ]; then
         LINUXPROBED="`linux-boot-prober btrfs ${BTRFSuuid} ${BTRFSsubvol}  2> /dev/null | tr ' ' '^' | paste -s -d ' '`"
      else
         LINUXPROBED="`linux-boot-prober ${DEVICE} 2> /dev/null | tr ' ' '^' | paste -s -d ' '`"
      fi
      prepare_boot_cache=
      boot_device_id=
      is_top_level=true
      title_correction_code=
      OS="${LONGNAME}"

      for LINUX in ${LINUXPROBED} ; do
        LROOT="`echo ${LINUX} | cut -d ':' -f 1`"
        LBOOT="`echo ${LINUX} | cut -d ':' -f 2`"
        LLABEL="`echo ${LINUX} | cut -d ':' -f 3 | tr '^' ' '`"
        LKERNEL="`echo ${LINUX} | cut -d ':' -f 4`"
        LINITRD="`echo ${LINUX} | cut -d ':' -f 5`"
        LPARAMS="`echo ${LINUX} | cut -d ':' -f 6- | tr '^' ' '`"

        if [ -z "${LLABEL}" ] ; then
          LLABEL="${LONGNAME}"
        fi

	if [ "${LROOT}" != "${LBOOT}" ]; then
	  LKERNEL="${LKERNEL#/boot}"
	  LINITRD="${LINITRD#/boot}"
	fi

	onstr="$(gettext_printf "(on %s)" "${DEVICE}")"
	recovery_params="$(echo "${LPARAMS}" | grep single)" || true
	counter=1
	while echo "$used_osprober_linux_ids" | grep 'osprober-gnulinux-$LKERNEL-${recovery_params}-$counter-$boot_device_id' > /dev/null; do
	    counter=$((counter+1));
	done
	if [ -z "$boot_device_id" ]; then
	    boot_device_id="$(grub_get_device_id "${DEVICE}")"
	fi
	used_osprober_linux_ids="$used_osprober_linux_ids 'osprober-gnulinux-$LKERNEL-${recovery_params}-$counter-$boot_device_id'"

	if [ -z "${prepare_boot_cache}" ]; then
	  prepare_boot_cache="$(prepare_grub_to_access_device ${LBOOT} | grub_add_tab)"
	fi

	if [ "x$is_top_level" = xtrue ] && [ "x${GRUB_DISABLE_SUBMENU}" != xy ]; then
            cat << EOF
menuentry '$(echo "$OS $onstr" | grub_quote)' $CLASS --class gnu-linux --class gnu --class os \$menuentry_id_option 'osprober-gnulinux-simple-$boot_device_id' {
EOF
	    save_default_entry | grub_add_tab
	    printf '%s\n' "${prepare_boot_cache}"
	    cat <<  EOF
	linux ${LKERNEL} ${LPARAMS}
EOF
            if [ -n "${LINITRD}" ] ; then
          cat << EOF
	initrd ${LINITRD}
EOF
            fi
        cat << EOF
}
EOF
	    echo "submenu '$(gettext_printf "Advanced options for %s" "${OS} $onstr" | grub_quote)' \$menuentry_id_option 'osprober-gnulinux-advanced-$boot_device_id' {"
	    is_top_level=false
	fi
	title="${LLABEL} $onstr"
        cat << EOF
	menuentry '$(echo "$title" | grub_quote)' --class gnu-linux --class gnu --class os \$menuentry_id_option 'osprober-gnulinux-$LKERNEL-${recovery_params}-$boot_device_id' {
EOF
	save_default_entry | sed -e "s/^/$grub_tab$grub_tab/"
	printf '%s\n' "${prepare_boot_cache}" | grub_add_tab
	cat <<  EOF
		linux ${LKERNEL} ${LPARAMS}
EOF
        if [ -n "${LINITRD}" ] ; then
            cat << EOF
		initrd ${LINITRD}
EOF
        fi
        cat << EOF
	}
EOF
	if [ x"$title" = x"$GRUB_ACTUAL_DEFAULT" ] || [ x"Previous Linux versions>$title" = x"$GRUB_ACTUAL_DEFAULT" ]; then
	    replacement_title="$(echo "Advanced options for ${OS} $onstr" | sed 's,>,>>,g')>$(echo "$title" | sed 's,>,>>,g')"
	    quoted="$(echo "$GRUB_ACTUAL_DEFAULT" | grub_quote)"
	    title_correction_code="${title_correction_code}if [ \"x\$default\" = '$quoted' ]; then default='$(echo "$replacement_title" | grub_quote)'; fi;"
	    grub_warn "$(gettext_printf "Please don't use old title \`%s' for GRUB_DEFAULT, use \`%s' (for versions before 2.00) or \`%s' (for 2.00 or later)" "$GRUB_ACTUAL_DEFAULT" "$replacement_title" "gnulinux-advanced-$boot_device_id>gnulinux-$version-$type-$boot_device_id")"
	fi
      done
      if [ x"$is_top_level" != xtrue ]; then
	  echo '}'
      fi
      echo "$title_correction_code"
    ;;
    macosx)
      if [ "${UUID}" ]; then
	OSXUUID="${UUID}"
	osx_entry xnu_kernel 32
	osx_entry xnu_kernel64 64
      fi
    ;;
    hurd)
      onstr="$(gettext_printf "(on %s)" "${DEVICE}")"
      cat << EOF
menuentry '$(echo "${LONGNAME} $onstr" | grub_quote)' --class hurd --class gnu --class os \$menuentry_id_option 'osprober-gnuhurd-/boot/gnumach.gz-false-$(grub_get_device_id "${DEVICE}")' {
EOF
      save_default_entry | grub_add_tab
      prepare_grub_to_access_device ${DEVICE} | grub_add_tab
      grub_device="`${grub_probe} --device ${DEVICE} --target=drive`"
      mach_device="`echo "${grub_device}" | sed -e 's/(\(hd.*\),msdos\(.*\))/\1s\2/'`"
      grub_fs="`${grub_probe} --device ${DEVICE} --target=fs`"
      case "${grub_fs}" in
	*fs)	hurd_fs="${grub_fs}" ;;
	*)	hurd_fs="${grub_fs}fs" ;;
      esac
      cat << EOF
	multiboot /boot/gnumach.gz root=device:${mach_device}
	module /hurd/${hurd_fs}.static ${hurd_fs} --readonly \\
			--multiboot-command-line='\${kernel-command-line}' \\
			--host-priv-port='\${host-port}' \\
			--device-master-port='\${device-port}' \\
			--exec-server-task='\${exec-task}' -T typed '\${root}' \\
			'\$(task-create)' '\$(task-resume)'
	module /lib/ld.so.1 exec /hurd/exec '\$(exec-task=task-create)'
}
EOF
    ;;
    minix)
	  cat << EOF
menuentry "${LONGNAME} (on ${DEVICE}, Multiboot)" {
EOF
         save_default_entry | sed -e "s/^/\t/"
         prepare_grub_to_access_device ${DEVICE} | sed -e "s/^/\t/"
	 cat << EOF
	multiboot /boot/image_latest
}
EOF
    ;;
    *)
      # TRANSLATORS: %s is replaced by OS name.
      gettext_printf "%s is not yet supported by grub-mkconfig.\n" "  ${LONGNAME}" >&2
    ;;
  esac
done
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
#!/bin/sh
cat <<EOF
if [ -f  \${config_directory}/custom.cfg ]; then
  source \${config_directory}/custom.cfg
elif [ -z "\${config_directory}" -a -f  \$prefix/custom.cfg ]; then
  source \$prefix/custom.cfg;
fi
EOF

#!/bin/sh

cat <<EOF
if [ "\$grub_platform" = "efi" ]; then
	menuentry "Memtest86" {
		search --set=root --no-floppy --fs-uuid 5264-D278
		chainloader /EFI/memtest86/memtestx64.efi
	}
fi
EOF