Linux version 2.6.17-ARCH (root@Wohnung) (gcc version 4.1.1) #1 SMP PREEMPT Fri Sep 15 14:02:51 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 32752 pages, LIFO batch:7 DMI 2.2 present. ACPI: RSDP (v000 Nvidia ) @ 0x000f75e0 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7640 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:10 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Built 1 zonelists Kernel command line: root=/dev/sda7 vga=773 ro mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2079.720 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1034656k/1048512k available (2410k kernel code, 13192k reserved, 715k data, 240k init, 131008k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4163.91 BogoMIPS (lpj=8327822) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed checking if image is initramfs... it is Freeing initrd memory: 445k freed ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. CPU0: AMD Athlon(tm) XP 2800+ stepping 00 Total of 1 processors activated (4163.91 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 Brought up 1 CPUs migration_cost=0 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: nForce2 C1 Halt Disconnect fixup Boot video device is 0000:03:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:00: ioport range 0x4000-0x407f could not be reserved pnp: 00:00: ioport range 0x4080-0x40ff has been reserved pnp: 00:00: ioport range 0x4400-0x447f has been reserved pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved pnp: 00:00: ioport range 0x4200-0x427f has been reserved pnp: 00:00: ioport range 0x4280-0x42ff has been reserved pnp: 00:01: ioport range 0x5000-0x503f has been reserved pnp: 00:01: ioport range 0x5500-0x553f has been reserved PCI: Bridge: 0000:00:08.0 IO window: a000-cfff MEM window: e4000000-e5ffffff PREFETCH window: 50000000-500fffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: e1000000-e3ffffff PREFETCH window: d0000000-dfffffff PCI: Setting latency timer of device 0000:00:08.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 262144k vesafb: mode is 1024x768x8, linelength=1024, pages=3 vesafb: protected mode interface info at c000:d600 vesafb: scrolling: redraw vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode ACPI wakeup devices: HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1 ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 240k freed libata version 1.20 loaded. sata_sil 0000:01:09.0: version 0.9 ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 16 ata1: SATA max UDMA/100 cmd 0xF8802080 ctl 0xF880208A bmdma 0xF8802000 irq 16 ata2: SATA max UDMA/100 cmd 0xF88020C0 ctl 0xF88020CA bmdma 0xF8802008 irq 16 ata1: SATA link up 1.5 Gbps (SStatus 113) ata1: dev 0 cfg 49:2f00 82:346b 83:5b01 84:4003 85:3469 86:1801 87:4003 88:207f ata1: dev 0 ATA-6, max UDMA/133, 156301488 sectors: LBA ata1: dev 0 configured for UDMA/100 scsi0 : sata_sil ata2: SATA link down (SStatus 0) scsi1 : sata_sil Vendor: ATA Model: WDC WD800JD-00HK Rev: 13.0 Type: Direct-Access ANSI SCSI revision: 05 ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 17 ata3: SATA max UDMA/100 cmd 0xF8804080 ctl 0xF880408A bmdma 0xF8804000 irq 17 ata4: SATA max UDMA/100 cmd 0xF88040C0 ctl 0xF88040CA bmdma 0xF8804008 irq 17 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ata3: SATA link up 1.5 Gbps (SStatus 113) ata3: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7469 86:3e41 87:4023 88:207f ata3: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48 ata3: dev 0 configured for UDMA/100 scsi2 : sata_sil ata4: SATA link up 1.5 Gbps (SStatus 113) ata4: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3c01 87:4003 88:203f ata4: dev 0 ATA-6, max UDMA/100, 234441648 sectors: LBA48 ata4(0): applying bridge limits ata4: dev 0 configured for UDMA/100 scsi3 : sata_sil Vendor: ATA Model: WDC WD1600JS-55N Rev: 10.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD1200JD-00G Rev: 02.0 Type: Direct-Access ANSI SCSI revision: 05 NFORCE2: IDE controller at PCI slot 0000:00:09.0 NFORCE2: chipset revision 162 NFORCE2: not 100% native mode: will probe irqs later NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sd 2:0:0:0: Attached scsi disk sdb SCSI device sdc: 234441648 512-byte hdwr sectors (120034 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: drive cache: write back SCSI device sdc: 234441648 512-byte hdwr sectors (120034 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: drive cache: write back sdc: sdc2 sd 3:0:0:0: Attached scsi disk sdc Probing IDE interface ide1... hdc: TSSTcorpDVD-ROM TS-H352A, ATAPI CD/DVD-ROM drive hdd: SAMSUNG CD-R/RW SW-252S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. usbcore: registered new driver usbfs usbcore: registered new driver hub CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 18 PCI: Setting latency timer of device 0000:00:04.0 to 64 gameport: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x201, speed 710kHz input: PC Speaker as /class/input/input0 Real Time Clock Driver v1.12ac eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0 lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver gameport: EMU10K1 is pci0000:01:08.1/gameport0, io 0xa400, speed 852kHz ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 21 (level, high) -> IRQ 19 PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: EHCI Host Controller ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.2: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: irq 19, io mem 0xe6005000 ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 17 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, high) -> IRQ 20 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 20, io mem 0xe6001000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 22 (level, high) -> IRQ 18 PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: OHCI Host Controller ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.1: irq 18, io mem 0xe6002000 ieee1394: Initialized config rom entry `ip1394' usb 1-1: new high speed USB device using ehci_hcd and address 2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected pci_hotplug: PCI Hot Plug PCI Core version: 0.5 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500 ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 21 (level, high) -> IRQ 19 PCI: Setting latency timer of device 0000:00:0d.0 to 64 usb 1-1: configuration #1 chosen from 1 choice ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e6003000-e60037ff] Max Packet=[2048] IR/IT contexts=[4/4] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected NVIDIA nForce2 chipset agpgart: AGP aperture is 256M @ 0xc0000000 usb 3-1: new low speed USB device using ohci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. ohci1394: fw-host0: SelfID received outside of bus reset sequence usbcore: registered new driver hiddev input: Logitech USB Receiver as /class/input/input1 input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.1-1 input: Logitech USB Receiver as /class/input/input2 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000087982e] eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) EXT3 FS on sda7, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. NTFS driver 2.1.27 [Flags: R/W MODULE]. NTFS volume version 3.1. Adding 722884k swap on /dev/sda5. Priority:-1 extents:1 across:722884k Vendor: WD Model: 1200BB External Rev: 0412 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdd: 234441648 512-byte hdwr sectors (120034 MB) sdd: Write Protect is off sdd: Mode Sense: 33 00 00 00 sdd: assuming drive cache: write through SCSI device sdd: 234441648 512-byte hdwr sectors (120034 MB) sdd: Write Protect is off sdd: Mode Sense: 33 00 00 00 sdd: assuming drive cache: write through sdd: sdd1 sd 4:0:0:0: Attached scsi disk sdd usb-storage: device scan complete