[ 1400.417] X.Org X Server 1.17.4 Release Date: 2015-10-28 [ 1400.417] X Protocol Version 11, Revision 0 [ 1400.417] Build Operating System: Linux 4.2.5-1-ARCH x86_64 [ 1400.417] Current Operating System: Linux chipskiste 4.4.5-1-ARCH #1 SMP PREEMPT Thu Mar 10 07:38:19 CET 2016 x86_64 [ 1400.417] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=87724089-bc92-4f8d-a6f7-7e5292c851f4 rw nomodeset [ 1400.417] Build Date: 01 November 2015 10:36:50AM [ 1400.417] [ 1400.417] Current version of pixman: 0.34.0 [ 1400.417] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 1400.417] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 1400.417] (==) Log file: "/var/log/Xorg.1.log", Time: Fri Mar 11 15:19:18 2016 [ 1400.418] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 1400.418] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 1400.418] (==) ServerLayout "aticonfig Layout" [ 1400.418] (**) |-->Screen "aticonfig-Screen[0]-0" (0) [ 1400.418] (**) | |-->Monitor "aticonfig-Monitor[0]-0" [ 1400.418] (**) | |-->Device "aticonfig-Device[0]-0" [ 1400.418] (==) Automatically adding devices [ 1400.418] (==) Automatically enabling devices [ 1400.418] (==) Automatically adding GPU devices [ 1400.418] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 1400.418] Entry deleted from font path. [ 1400.418] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 1400.418] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 1400.418] Entry deleted from font path. [ 1400.418] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 1400.418] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/Type1/ [ 1400.418] (==) ModulePath set to "/usr/lib/xorg/modules" [ 1400.418] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 1400.418] (II) Loader magic: 0x817d60 [ 1400.418] (II) Module ABI versions: [ 1400.418] X.Org ANSI C Emulation: 0.4 [ 1400.418] X.Org Video Driver: 19.0 [ 1400.418] X.Org XInput driver : 21.1 [ 1400.418] X.Org Server Extension : 9.0 [ 1400.420] (EE) systemd-logind: failed to get session: PID 2246 does not belong to any known session [ 1400.422] (--) PCI:*(0:1:0:0) 1002:6811:148c:2015 rev 129, Mem @ 0xd0000000/268435456, 0xfe9c0000/262144, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072 [ 1400.422] (II) Open ACPI successful (/var/run/acpid.socket) [ 1400.422] (II) "glx" will be loaded by default. [ 1400.422] (II) LoadModule: "glx" [ 1400.422] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 1400.423] (II) Module glx: vendor="Advanced Micro Devices, Inc." [ 1400.423] compiled for 6.9.0, module version = 1.0.0 [ 1400.423] (II) LoadModule: "fglrx" [ 1400.423] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so [ 1400.453] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc." [ 1400.453] compiled for 1.4.99.906, module version = 15.30.3 [ 1400.453] Module class: X.Org Video Driver [ 1400.453] (II) Loading sub module "fglrxdrm" [ 1400.453] (II) LoadModule: "fglrxdrm" [ 1400.453] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so [ 1400.453] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc." [ 1400.453] compiled for 1.4.99.906, module version = 15.30.3 [ 1400.454] (II) AMD Proprietary Linux Driver Version Identifier:15.30.3 [ 1400.454] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-15.302 [ 1400.454] (II) AMD Proprietary Linux Driver Build Date: Dec 17 2015 02:43:16 [ 1400.454] (++) using VT number 7 [ 1400.454] (WW) xf86OpenConsole: setpgid failed: Operation not permitted [ 1400.454] (WW) Falling back to old probe method for fglrx [ 1400.477] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default [ 1400.479] ukiDynamicMajor: found major device number 247 [ 1400.479] ukiDynamicMajor: found major device number 247 [ 1400.479] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 1400.479] ukiOpenDevice: node name is /dev/ati/card0 [ 1400.479] ukiOpenDevice: open result is 11, (OK) [ 1400.479] ukiOpenByBusid: ukiOpenMinor returns 11 [ 1400.479] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 1400.482] (--) Chipset Supported AMD Graphics Processor (0x6811) found [ 1400.482] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:0) found [ 1400.482] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:2:0) found [ 1400.482] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:5:0) found [ 1400.482] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:6:0) found [ 1400.482] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found [ 1400.482] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found [ 1400.482] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found [ 1400.482] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found [ 1400.482] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found [ 1400.482] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found [ 1400.482] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found [ 1400.482] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found [ 1400.482] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found [ 1400.482] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found [ 1400.482] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found [ 1400.482] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found [ 1400.482] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found [ 1400.482] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 1400.483] (II) fglrx(0): pEnt->device->identifier=0x1d83b80 [ 1400.483] (II) fglrx(0): === [xdl_xs117_atiddxPreInit] === begin [ 1400.483] (II) fglrx(0): FB driver is enabled [ 1400.483] (II) Loading sub module "vgahw" [ 1400.483] (II) LoadModule: "vgahw" [ 1400.483] (II) Loading /usr/lib/xorg/modules/libvgahw.so [ 1400.483] (II) Module vgahw: vendor="X.Org Foundation" [ 1400.483] compiled for 1.17.4, module version = 0.1.0 [ 1400.483] ABI class: X.Org Video Driver, version 19.0 [ 1400.483] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 [ 1400.483] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 1400.483] (==) fglrx(0): Default visual is TrueColor [ 1400.483] (**) fglrx(0): Option "DPMS" "true" [ 1400.484] (==) fglrx(0): RGB weight 888 [ 1400.484] (II) fglrx(0): Using 8 bits per RGB [ 1400.484] (==) fglrx(0): Buffer Tiling is ON [ 1400.484] (II) Loading sub module "fglrxdrm" [ 1400.484] (II) LoadModule: "fglrxdrm" [ 1400.484] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so [ 1400.484] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc." [ 1400.484] compiled for 1.4.99.906, module version = 15.30.3 [ 1400.485] ukiDynamicMajor: found major device number 247 [ 1400.485] ukiDynamicMajor: found major device number 247 [ 1400.485] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 1400.485] ukiOpenDevice: node name is /dev/ati/card0 [ 1400.485] ukiOpenDevice: open result is 13, (OK) [ 1400.485] ukiOpenByBusid: ukiOpenMinor returns 13 [ 1400.485] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 1400.485] (**) fglrx(0): NoAccel = NO [ 1400.486] (**) fglrx(0): AMD 2D Acceleration Architecture enabled [ 1400.486] (--) fglrx(0): Chipset: "AMD Radeon (TM) R7 370 Series " (Chipset = 0x6811) [ 1400.486] (--) fglrx(0): (PciSubVendor = 0x148c, PciSubDevice = 0x2015) [ 1400.486] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD [ 1400.486] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000 [ 1400.486] (--) fglrx(0): MMIO registers at 0xfe9c0000 [ 1400.486] (--) fglrx(0): I/O port at 0x0000d000 [ 1400.486] (==) fglrx(0): ROM-BIOS at 0x000c0000 [ 1400.486] (II) fglrx(0): AC Adapter is used [ 1400.492] (II) fglrx(0): Primary V_BIOS segment is: 0xc000 [ 1400.492] (II) Loading sub module "vbe" [ 1400.492] (II) LoadModule: "vbe" [ 1400.492] (II) Loading /usr/lib/xorg/modules/libvbe.so [ 1400.492] (II) Module vbe: vendor="X.Org Foundation" [ 1400.492] compiled for 1.17.4, module version = 1.1.0 [ 1400.492] ABI class: X.Org Video Driver, version 19.0 [ 1400.493] (II) fglrx(0): VESA BIOS detected [ 1400.493] (II) fglrx(0): VESA VBE Version 3.0 [ 1400.493] (II) fglrx(0): VESA VBE Total Mem: 16384 kB [ 1400.493] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS [ 1400.493] (II) fglrx(0): VESA VBE OEM Software Rev: 15.49 [ 1400.493] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc. [ 1400.493] (II) fglrx(0): VESA VBE OEM Product: TRINIDAD [ 1400.493] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00 [ 1400.493] (II) fglrx(0): AMD Video BIOS revision 9 or later detected [ 1400.493] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5 [ 1400.493] (II) fglrx(0): PCIE card detected [ 1400.493] (--) fglrx(0): Using per-process page tables (PPPT) as GART. [ 1400.493] (WW) fglrx(0): board is an unknown third party board, chipset is supported [ 1400.493] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000) [ 1400.493] (II) fglrx(0): RandR 1.2 support is enabled! [ 1400.493] (II) fglrx(0): RandR 1.2 rotation support is enabled! [ 1400.493] (II) Loading sub module "fb" [ 1400.493] (II) LoadModule: "fb" [ 1400.493] (II) Loading /usr/lib/xorg/modules/libfb.so [ 1400.493] (II) Module fb: vendor="X.Org Foundation" [ 1400.493] compiled for 1.17.4, module version = 1.0.0 [ 1400.493] ABI class: X.Org ANSI C Emulation, version 0.4 [ 1400.493] (II) fglrx(0): EDID Management option: EDID Management is enabled [ 1400.493] (II) Loading sub module "ddc" [ 1400.493] (II) LoadModule: "ddc" [ 1400.493] (II) Module "ddc" already built-in [ 1400.951] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0 [ 1400.951] (II) fglrx(0): Output DFP2 has no monitor section [ 1400.951] (II) fglrx(0): Output DFP3 has no monitor section [ 1400.951] (II) fglrx(0): Output DFP4 has no monitor section [ 1400.951] (II) fglrx(0): Output DFP5 has no monitor section [ 1400.951] (II) fglrx(0): Output DFP6 has no monitor section [ 1400.951] (II) fglrx(0): Output DFP7 has no monitor section [ 1400.951] (II) fglrx(0): Output CRT1 has no monitor section [ 1400.951] (II) Loading sub module "ddc" [ 1400.951] (II) LoadModule: "ddc" [ 1400.951] (II) Module "ddc" already built-in [ 1400.951] (II) fglrx(0): Connected Display0: DFP7 [ 1400.951] (II) fglrx(0): Display0 EDID data --------------------------- [ 1400.951] (II) fglrx(0): Manufacturer: GSM Model: 56d9 Serial#: 125602 [ 1400.951] (II) fglrx(0): Year: 2011 Week: 4 [ 1400.951] (II) fglrx(0): EDID Version: 1.3 [ 1400.951] (II) fglrx(0): Digital Display Input [ 1400.951] (II) fglrx(0): Max Image Size [cm]: horiz.: 53 vert.: 30 [ 1400.951] (II) fglrx(0): Gamma: 2.20 [ 1400.951] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off [ 1400.951] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 1400.951] (II) fglrx(0): First detailed timing is preferred mode [ 1400.951] (II) fglrx(0): redX: 0.635 redY: 0.342 greenX: 0.292 greenY: 0.611 [ 1400.951] (II) fglrx(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329 [ 1400.951] (II) fglrx(0): Supported established timings: [ 1400.951] (II) fglrx(0): 720x400@70Hz [ 1400.951] (II) fglrx(0): 640x480@60Hz [ 1400.951] (II) fglrx(0): 640x480@75Hz [ 1400.951] (II) fglrx(0): 800x600@56Hz [ 1400.951] (II) fglrx(0): 800x600@60Hz [ 1400.951] (II) fglrx(0): 800x600@75Hz [ 1400.951] (II) fglrx(0): 832x624@75Hz [ 1400.951] (II) fglrx(0): 1024x768@60Hz [ 1400.951] (II) fglrx(0): 1024x768@75Hz [ 1400.951] (II) fglrx(0): 1280x1024@75Hz [ 1400.951] (II) fglrx(0): 1152x864@75Hz [ 1400.951] (II) fglrx(0): Manufacturer's mask: 0 [ 1400.951] (II) fglrx(0): Supported standard timings: [ 1400.951] (II) fglrx(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 1400.951] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 1400.951] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 1400.951] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 1400.951] (II) fglrx(0): Supported detailed timing: [ 1400.951] (II) fglrx(0): clock: 138.5 MHz Image Size: 531 x 299 mm [ 1400.951] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 1400.951] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0 [ 1400.951] (II) fglrx(0): Supported detailed timing: [ 1400.951] (II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 299 mm [ 1400.951] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 1400.951] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 1400.951] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz [ 1400.951] (II) fglrx(0): Monitor name: W2442 [ 1400.951] (II) fglrx(0): EDID (in hex): [ 1400.951] (II) fglrx(0): 00ffffffffffff001e6dd956a2ea0100 [ 1400.951] (II) fglrx(0): 0415010380351e78eaaec5a2574a9c25 [ 1400.951] (II) fglrx(0): 125054a76b80b30081808140714f0101 [ 1400.951] (II) fglrx(0): 0101010101011a3680a070381f403020 [ 1400.951] (II) fglrx(0): 3500132b2100001a023a801871382d40 [ 1400.951] (II) fglrx(0): 582c4500132b2100001e000000fd0038 [ 1400.951] (II) fglrx(0): 4b1e530f000a202020202020000000fc [ 1400.951] (II) fglrx(0): 0057323434320a2020202020202000f9 [ 1400.951] (II) fglrx(0): End of Display0 EDID data -------------------- [ 1400.951] (II) fglrx(0): Dynamic Surface Resizing Enabled [ 1400.952] (II) fglrx(0): EDID for output DFP1 [ 1400.952] (II) fglrx(0): EDID for output DFP2 [ 1400.952] (II) fglrx(0): EDID for output DFP3 [ 1400.952] (II) fglrx(0): EDID for output DFP4 [ 1400.952] (II) fglrx(0): EDID for output DFP5 [ 1400.952] (II) fglrx(0): EDID for output DFP6 [ 1400.952] (II) fglrx(0): EDID for output DFP7 [ 1400.952] (II) fglrx(0): Manufacturer: GSM Model: 56d9 Serial#: 125602 [ 1400.952] (II) fglrx(0): Year: 2011 Week: 4 [ 1400.952] (II) fglrx(0): EDID Version: 1.3 [ 1400.952] (II) fglrx(0): Digital Display Input [ 1400.952] (II) fglrx(0): Max Image Size [cm]: horiz.: 53 vert.: 30 [ 1400.952] (II) fglrx(0): Gamma: 2.20 [ 1400.952] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off [ 1400.952] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 1400.952] (II) fglrx(0): First detailed timing is preferred mode [ 1400.952] (II) fglrx(0): redX: 0.635 redY: 0.342 greenX: 0.292 greenY: 0.611 [ 1400.952] (II) fglrx(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329 [ 1400.952] (II) fglrx(0): Supported established timings: [ 1400.952] (II) fglrx(0): 720x400@70Hz [ 1400.952] (II) fglrx(0): 640x480@60Hz [ 1400.952] (II) fglrx(0): 640x480@75Hz [ 1400.952] (II) fglrx(0): 800x600@56Hz [ 1400.952] (II) fglrx(0): 800x600@60Hz [ 1400.952] (II) fglrx(0): 800x600@75Hz [ 1400.952] (II) fglrx(0): 832x624@75Hz [ 1400.952] (II) fglrx(0): 1024x768@60Hz [ 1400.952] (II) fglrx(0): 1024x768@75Hz [ 1400.952] (II) fglrx(0): 1280x1024@75Hz [ 1400.952] (II) fglrx(0): 1152x864@75Hz [ 1400.952] (II) fglrx(0): Manufacturer's mask: 0 [ 1400.952] (II) fglrx(0): Supported standard timings: [ 1400.952] (II) fglrx(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 1400.952] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 1400.952] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 1400.952] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 1400.952] (II) fglrx(0): Supported detailed timing: [ 1400.952] (II) fglrx(0): clock: 138.5 MHz Image Size: 531 x 299 mm [ 1400.952] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 1400.952] (II) fglrx(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0 [ 1400.952] (II) fglrx(0): Supported detailed timing: [ 1400.952] (II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 299 mm [ 1400.952] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0 [ 1400.952] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0 [ 1400.952] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz [ 1400.952] (II) fglrx(0): Monitor name: W2442 [ 1400.952] (II) fglrx(0): EDID (in hex): [ 1400.952] (II) fglrx(0): 00ffffffffffff001e6dd956a2ea0100 [ 1400.952] (II) fglrx(0): 0415010380351e78eaaec5a2574a9c25 [ 1400.952] (II) fglrx(0): 125054a76b80b30081808140714f0101 [ 1400.952] (II) fglrx(0): 0101010101011a3680a070381f403020 [ 1400.952] (II) fglrx(0): 3500132b2100001a023a801871382d40 [ 1400.953] (II) fglrx(0): 582c4500132b2100001e000000fd0038 [ 1400.953] (II) fglrx(0): 4b1e530f000a202020202020000000fc [ 1400.953] (II) fglrx(0): 0057323434320a2020202020202000f9 [ 1400.953] (II) fglrx(0): Printing probed modes for output DFP7 [ 1400.953] (II) fglrx(0): Modeline "1920x1080"x60.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP) [ 1400.953] (II) fglrx(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 1400.953] (II) fglrx(0): Modeline "1400x1050"x60.0 146.25 1400 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 1400.953] (II) fglrx(0): Modeline "1600x900"x60.0 146.25 1600 1784 1960 2240 900 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 1400.953] (II) fglrx(0): Modeline "1360x1024"x60.0 146.25 1360 1784 1960 2240 1024 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 1400.953] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 1400.953] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 1400.953] (II) fglrx(0): Modeline "1440x900"x60.0 146.25 1440 1784 1960 2240 900 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 1400.953] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 1400.953] (II) fglrx(0): Modeline "1366x768"x60.0 146.25 1366 1784 1960 2240 768 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 1400.953] (II) fglrx(0): Modeline "1360x768"x60.0 146.25 1360 1784 1960 2240 768 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 1400.953] (II) fglrx(0): Modeline "1280x800"x60.0 108.00 1280 1376 1488 1800 800 961 964 1000 +hsync +vsync (60.0 kHz e) [ 1400.953] (II) fglrx(0): Modeline "1152x864"x60.0 138.50 1152 1968 2000 2080 864 1083 1088 1111 +hsync -vsync (66.6 kHz e) [ 1400.953] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 1400.953] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz e) [ 1400.953] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1376 1488 1800 720 961 964 1000 +hsync +vsync (60.0 kHz e) [ 1400.953] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 1400.953] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 1400.953] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 1400.953] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 1400.953] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 1400.953] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 1400.953] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 1400.953] (II) fglrx(0): EDID for output CRT1 [ 1400.953] (II) fglrx(0): Output DFP1 disconnected [ 1400.953] (II) fglrx(0): Output DFP2 disconnected [ 1400.953] (II) fglrx(0): Output DFP3 disconnected [ 1400.953] (II) fglrx(0): Output DFP4 disconnected [ 1400.953] (II) fglrx(0): Output DFP5 disconnected [ 1400.953] (II) fglrx(0): Output DFP6 disconnected [ 1400.953] (II) fglrx(0): Output DFP7 connected [ 1400.953] (II) fglrx(0): Output CRT1 disconnected [ 1400.953] (II) fglrx(0): Using exact sizes for initial modes [ 1400.953] (II) fglrx(0): Output DFP7 using initial mode 1920x1080 [ 1400.953] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 1400.953] (II) fglrx(0): DPI set to (96, 96) [ 1400.953] (II) fglrx(0): Eyefinity capable adapter detected. [ 1400.953] (II) fglrx(0): Adapter AMD Radeon (TM) R7 370 Series has 6 configurable heads and 1 displays connected. [ 1400.953] (==) fglrx(0): PseudoColor visuals disabled [ 1400.953] (II) Loading sub module "ramdac" [ 1400.953] (II) LoadModule: "ramdac" [ 1400.953] (II) Module "ramdac" already built-in [ 1400.953] (==) fglrx(0): NoDRI = NO [ 1400.953] (==) fglrx(0): Capabilities: 0x00000000 [ 1400.953] (==) fglrx(0): CapabilitiesEx: 0x00000000 [ 1400.953] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" [ 1400.953] (==) fglrx(0): UseFastTLS=0 [ 1400.953] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled [ 1400.953] (--) Depth 24 pixmap format is 32 bpp [ 1400.953] (II) fglrx(0): doing swlDriScreenInit [ 1400.953] (II) fglrx(0): swlDriScreenInit for fglrx driver [ 1400.953] ukiDynamicMajor: found major device number 247 [ 1400.953] ukiDynamicMajor: found major device number 247 [ 1400.953] ukiDynamicMajor: found major device number 247 [ 1400.953] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 1400.953] ukiOpenDevice: node name is /dev/ati/card0 [ 1400.954] ukiOpenDevice: open result is 14, (OK) [ 1400.954] ukiOpenByBusid: ukiOpenMinor returns 14 [ 1400.954] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 1400.954] (II) fglrx(0): [uki] DRM interface version 1.0 [ 1400.954] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0" [ 1400.954] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x1db9000 [ 1400.954] (II) fglrx(0): [uki] mapped SAREA 0x1db9000 to 0x7fc2a5d98000 [ 1400.954] (II) fglrx(0): [uki] framebuffer handle = 0x1b94000 [ 1400.954] (II) fglrx(0): [uki] added 1 reserved context for kernel [ 1400.954] (II) fglrx(0): swlDriScreenInit done [ 1400.954] (II) fglrx(0): Kernel Module Version Information: [ 1400.954] (II) fglrx(0): Name: fglrx [ 1400.954] (II) fglrx(0): Version: 15.30.3 [ 1400.954] (II) fglrx(0): Date: Dec 17 2015 [ 1400.954] (II) fglrx(0): Desc: AMD FireGL DRM kernel module [ 1400.954] (II) fglrx(0): Kernel Module version matches driver. [ 1400.954] (II) fglrx(0): Kernel Module Build Time Information: [ 1400.954] (II) fglrx(0): Build-Kernel UTS_RELEASE: 4.4.5-1-ARCH [ 1400.954] (II) fglrx(0): Build-Kernel MODVERSIONS: yes [ 1400.954] (II) fglrx(0): Build-Kernel __SMP__: yes [ 1400.954] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 [ 1400.954] (II) fglrx(0): [uki] register handle = 0x01b95000 [ 1400.954] (II) fglrx(0): DRI initialization successfull [ 1400.954] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x010e0000 [ 1400.954] (==) fglrx(0): Backing store enabled [ 1400.954] (**) fglrx(0): DPMS enabled [ 1400.955] (II) fglrx(0): Initialized in-driver Xinerama extension [ 1400.955] (**) fglrx(0): Textured Video is enabled. [ 1400.955] (II) LoadModule: "glesx" [ 1400.955] (II) Loading /usr/lib/xorg/modules/glesx.so [ 1400.959] (II) Module glesx: vendor="X.Org Foundation" [ 1400.959] compiled for 1.4.99.906, module version = 1.0.0 [ 1400.959] (II) fglrx(0): GLESX enableFlags = 8784 [ 1400.959] (II) fglrx(0): GLESX is enabled [ 1400.959] (II) LoadModule: "amdxmm" [ 1400.959] (II) Loading /usr/lib/xorg/modules/amdxmm.so [ 1400.959] (II) Module amdxmm: vendor="X.Org Foundation" [ 1400.959] compiled for 1.4.99.906, module version = 2.0.0 [ 1401.187] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): [ 1401.190] (II) fglrx(0): Enable composite support successfully [ 1401.190] (WW) fglrx(0): Option "VendorName" is not used [ 1401.190] (WW) fglrx(0): Option "ModelName" is not used [ 1401.190] (II) fglrx(0): X context handle = 0x5 [ 1401.190] (II) fglrx(0): [DRI] installation complete [ 1401.190] (==) fglrx(0): Silken mouse enabled [ 1401.190] (==) fglrx(0): Using HW cursor of display infrastructure! [ 1401.191] (II) fglrx(0): LPT is disabled by configure option [ 1401.191] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 1401.839] (--) RandR disabled [ 1401.844] ukiDynamicMajor: found major device number 247 [ 1401.844] ukiDynamicMajor: found major device number 247 [ 1401.844] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 1401.844] ukiOpenDevice: node name is /dev/ati/card0 [ 1401.844] ukiOpenDevice: open result is 15, (OK) [ 1401.844] ukiOpenByBusid: ukiOpenMinor returns 15 [ 1401.844] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 1401.845] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory] [ 1401.849] ukiDynamicMajor: found major device number 247 [ 1401.849] ukiDynamicMajor: found major device number 247 [ 1401.849] ukiDynamicMajor: found major device number 247 [ 1401.849] ukiOpenDevice: node name is /dev/ati/card0 [ 1401.849] ukiOpenDevice: open result is 16, (OK) [ 1401.849] ukiGetBusid returned 'PCI:1:0:0' [ 1401.849] ukiOpenDevice: node name is /dev/ati/card1 [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: Open failed [ 1401.849] ukiOpenDevice: node name is /dev/ati/card2 [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: Open failed [ 1401.849] ukiOpenDevice: node name is /dev/ati/card3 [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: Open failed [ 1401.849] ukiOpenDevice: node name is /dev/ati/card4 [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: Open failed [ 1401.849] ukiOpenDevice: node name is /dev/ati/card5 [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: Open failed [ 1401.849] ukiOpenDevice: node name is /dev/ati/card6 [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: Open failed [ 1401.849] ukiOpenDevice: node name is /dev/ati/card7 [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: Open failed [ 1401.849] ukiOpenDevice: node name is /dev/ati/card8 [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: Open failed [ 1401.849] ukiOpenDevice: node name is /dev/ati/card9 [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: Open failed [ 1401.849] ukiOpenDevice: node name is /dev/ati/card10 [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: Open failed [ 1401.849] ukiOpenDevice: node name is /dev/ati/card11 [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: Open failed [ 1401.849] ukiOpenDevice: node name is /dev/ati/card12 [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: Open failed [ 1401.849] ukiOpenDevice: node name is /dev/ati/card13 [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: Open failed [ 1401.849] ukiOpenDevice: node name is /dev/ati/card14 [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: Open failed [ 1401.849] ukiOpenDevice: node name is /dev/ati/card15 [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: open result is -1, (No such device) [ 1401.849] ukiOpenDevice: Open failed [ 1401.849] ukiDynamicMajor: found major device number 247 [ 1401.849] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 1401.849] ukiOpenDevice: node name is /dev/ati/card0 [ 1401.849] ukiOpenDevice: open result is 16, (OK) [ 1401.849] ukiOpenByBusid: ukiOpenMinor returns 16 [ 1401.849] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 1401.894] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0 [ 1401.895] ukiDynamicMajor: found major device number 247 [ 1401.895] ukiDynamicMajor: found major device number 247 [ 1401.895] ukiDynamicMajor: found major device number 247 [ 1401.895] ukiOpenDevice: node name is /dev/ati/card0 [ 1401.895] ukiOpenDevice: open result is 17, (OK) [ 1401.895] ukiGetBusid returned 'PCI:1:0:0' [ 1401.895] ukiOpenDevice: node name is /dev/ati/card1 [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: Open failed [ 1401.895] ukiOpenDevice: node name is /dev/ati/card2 [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: Open failed [ 1401.895] ukiOpenDevice: node name is /dev/ati/card3 [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: Open failed [ 1401.895] ukiOpenDevice: node name is /dev/ati/card4 [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: Open failed [ 1401.895] ukiOpenDevice: node name is /dev/ati/card5 [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: Open failed [ 1401.895] ukiOpenDevice: node name is /dev/ati/card6 [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: Open failed [ 1401.895] ukiOpenDevice: node name is /dev/ati/card7 [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: Open failed [ 1401.895] ukiOpenDevice: node name is /dev/ati/card8 [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: Open failed [ 1401.895] ukiOpenDevice: node name is /dev/ati/card9 [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: Open failed [ 1401.895] ukiOpenDevice: node name is /dev/ati/card10 [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: Open failed [ 1401.895] ukiOpenDevice: node name is /dev/ati/card11 [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: Open failed [ 1401.895] ukiOpenDevice: node name is /dev/ati/card12 [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: Open failed [ 1401.895] ukiOpenDevice: node name is /dev/ati/card13 [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: Open failed [ 1401.895] ukiOpenDevice: node name is /dev/ati/card14 [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: Open failed [ 1401.895] ukiOpenDevice: node name is /dev/ati/card15 [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: open result is -1, (No such device) [ 1401.895] ukiOpenDevice: Open failed [ 1401.895] ukiDynamicMajor: found major device number 247 [ 1401.895] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 1401.895] ukiOpenDevice: node name is /dev/ati/card0 [ 1401.895] ukiOpenDevice: open result is 17, (OK) [ 1401.895] ukiOpenByBusid: ukiOpenMinor returns 17 [ 1401.895] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 1401.907] (II) fglrx(0): OverDrive5 Detected! [ 1401.912] (II) fglrx(0): Setting screen physical size to 508 x 285 [ 1401.968] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 1401.969] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 1401.969] (**) Power Button: Applying InputClass "system-keyboard" [ 1401.969] (II) LoadModule: "evdev" [ 1401.969] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 1401.969] (II) Module evdev: vendor="X.Org Foundation" [ 1401.969] compiled for 1.17.4, module version = 2.10.0 [ 1401.969] Module class: X.Org XInput Driver [ 1401.969] ABI class: X.Org XInput driver, version 21.1 [ 1401.969] (II) Using input driver 'evdev' for 'Power Button' [ 1401.969] (**) Power Button: always reports core events [ 1401.969] (**) evdev: Power Button: Device: "/dev/input/event3" [ 1401.969] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 1401.969] (--) evdev: Power Button: Found keys [ 1401.969] (II) evdev: Power Button: Configuring as keyboard [ 1401.969] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 1401.969] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 1401.969] (**) Option "xkb_rules" "evdev" [ 1401.969] (**) Option "xkb_layout" "de" [ 1401.969] (**) Option "xkb_variant" "neo" [ 1401.998] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 1401.998] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 1401.998] (**) Power Button: Applying InputClass "system-keyboard" [ 1401.998] (II) Using input driver 'evdev' for 'Power Button' [ 1401.998] (**) Power Button: always reports core events [ 1401.998] (**) evdev: Power Button: Device: "/dev/input/event2" [ 1401.998] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 1401.998] (--) evdev: Power Button: Found keys [ 1401.998] (II) evdev: Power Button: Configuring as keyboard [ 1401.998] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2" [ 1401.998] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 1401.998] (**) Option "xkb_rules" "evdev" [ 1401.998] (**) Option "xkb_layout" "de" [ 1401.998] (**) Option "xkb_variant" "neo" [ 1401.999] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event9) [ 1401.999] (II) No input driver specified, ignoring this device. [ 1401.999] (II) This device may have been added with another device file. [ 1401.999] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event10) [ 1401.999] (II) No input driver specified, ignoring this device. [ 1401.999] (II) This device may have been added with another device file. [ 1401.999] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event5) [ 1401.999] (II) No input driver specified, ignoring this device. [ 1401.999] (II) This device may have been added with another device file. [ 1401.999] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event6) [ 1401.999] (II) No input driver specified, ignoring this device. [ 1401.999] (II) This device may have been added with another device file. [ 1402.000] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event7) [ 1402.000] (II) No input driver specified, ignoring this device. [ 1402.000] (II) This device may have been added with another device file. [ 1402.000] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event8) [ 1402.000] (II) No input driver specified, ignoring this device. [ 1402.000] (II) This device may have been added with another device file. [ 1402.000] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1) [ 1402.000] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 1402.000] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 1402.000] (**) Logitech USB Optical Mouse: always reports core events [ 1402.000] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1" [ 1402.053] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05b [ 1402.053] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons [ 1402.053] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s) [ 1402.053] (--) evdev: Logitech USB Optical Mouse: Found relative axes [ 1402.053] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes [ 1402.053] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse [ 1402.053] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support [ 1402.053] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 1402.053] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 1402.053] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/0003:046D:C05B.0001/input/input1/event1" [ 1402.053] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8) [ 1402.053] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes. [ 1402.053] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 1402.053] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 1402.053] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 1402.053] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 1402.054] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 1402.054] (II) No input driver specified, ignoring this device. [ 1402.054] (II) This device may have been added with another device file. [ 1402.054] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event12) [ 1402.054] (II) No input driver specified, ignoring this device. [ 1402.054] (II) This device may have been added with another device file. [ 1402.054] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event13) [ 1402.054] (II) No input driver specified, ignoring this device. [ 1402.054] (II) This device may have been added with another device file. [ 1402.055] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event14) [ 1402.055] (II) No input driver specified, ignoring this device. [ 1402.055] (II) This device may have been added with another device file. [ 1402.055] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event15) [ 1402.055] (II) No input driver specified, ignoring this device. [ 1402.055] (II) This device may have been added with another device file. [ 1402.055] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event16) [ 1402.055] (II) No input driver specified, ignoring this device. [ 1402.055] (II) This device may have been added with another device file. [ 1402.056] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event17) [ 1402.056] (II) No input driver specified, ignoring this device. [ 1402.056] (II) This device may have been added with another device file. [ 1402.056] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event18) [ 1402.056] (II) No input driver specified, ignoring this device. [ 1402.056] (II) This device may have been added with another device file. [ 1402.056] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11) [ 1402.056] (II) No input driver specified, ignoring this device. [ 1402.056] (II) This device may have been added with another device file. [ 1402.057] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 1402.057] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 1402.057] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard" [ 1402.057] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 1402.057] (**) AT Translated Set 2 keyboard: always reports core events [ 1402.057] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 1402.057] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 1402.057] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 1402.057] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 1402.057] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 1402.057] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9) [ 1402.057] (**) Option "xkb_rules" "evdev" [ 1402.057] (**) Option "xkb_layout" "de" [ 1402.057] (**) Option "xkb_variant" "neo" [ 1402.058] (II) config/udev: Adding input device PC Speaker (/dev/input/event4) [ 1402.058] (II) No input driver specified, ignoring this device. [ 1402.058] (II) This device may have been added with another device file. [ 1402.139] (II) evdev: AT Translated Set 2 keyboard: Close [ 1402.139] (II) UnloadModule: "evdev" [ 1402.139] (II) evdev: Logitech USB Optical Mouse: Close [ 1402.139] (II) UnloadModule: "evdev" [ 1402.139] (II) evdev: Power Button: Close [ 1402.139] (II) UnloadModule: "evdev" [ 1402.139] (II) evdev: Power Button: Close [ 1402.139] (II) UnloadModule: "evdev" [ 1402.140] (II) fglrx(0): Shutdown CMMQS [ 1402.142] (II) fglrx(0): [uki] removed 1 reserved context for kernel [ 1402.142] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x1db9000 at 0x7fc2a5d98000 [ 1402.679] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error [ 1402.679] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error [ 1402.679] (II) Server terminated successfully (0). Closing log file.