[ 0.000000] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.13-1-lts (builduser@andyrtr) (gcc version 5.2.0 (GCC) ) #1 SMP Tue Nov 10 09:48:15 CET 2015 [ 0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux-lts.img root=/dev/sda2 rw radeon.dpm=1 drm.debug=0x06 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a8942fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a8943000-0x00000000a9d3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000a9d40000-0x00000000a9ebffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000a9ec0000-0x00000000a9fbffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000a9fc0000-0x00000000a9ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000a9fff000-0x00000000a9ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffec0000-0x00000000ffedefff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001cfdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xa9dab018-0xa9dba057] usable ==> usable [ 0.000000] e820: update [mem 0xa9d9a018-0xa9daa057] usable ==> usable [ 0.000000] e820: update [mem 0xa9d8c018-0xa9d99057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000a8942fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000a8943000-0x00000000a9d3ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000a9d40000-0x00000000a9d8c017] usable [ 0.000000] reserve setup_data: [mem 0x00000000a9d8c018-0x00000000a9d99057] usable [ 0.000000] reserve setup_data: [mem 0x00000000a9d99058-0x00000000a9d9a017] usable [ 0.000000] reserve setup_data: [mem 0x00000000a9d9a018-0x00000000a9daa057] usable [ 0.000000] reserve setup_data: [mem 0x00000000a9daa058-0x00000000a9dab017] usable [ 0.000000] reserve setup_data: [mem 0x00000000a9dab018-0x00000000a9dba057] usable [ 0.000000] reserve setup_data: [mem 0x00000000a9dba058-0x00000000a9ebffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000a9ec0000-0x00000000a9fbffff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000a9fc0000-0x00000000a9ffefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000a9fff000-0x00000000a9ffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffec0000-0x00000000ffedefff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000001cfdfffff] usable [ 0.000000] efi: EFI v2.10 by HPQ [ 0.000000] efi: ACPI=0xa9ffe000 ACPI 2.0=0xa9ffe014 SMBIOS=0xa93f0518 [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP ProBook 4540s/17F6, BIOS 68IRR Ver. F.50 08/04/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x1cfe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FE0000000 write-back [ 0.000000] 3 base 0A0000000 mask FF8000000 write-back [ 0.000000] 4 base 0A8000000 mask FFE000000 write-back [ 0.000000] 5 base 0AA000000 mask FFF000000 uncachable [ 0.000000] 6 base 100000000 mask F80000000 write-back [ 0.000000] 7 base 180000000 mask FC0000000 write-back [ 0.000000] 8 base 1C0000000 mask FE0000000 write-back [ 0.000000] 9 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] e820: last_pfn = 0xaa000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x1cfc00000-0x1cfdfffff] [ 0.000000] [mem 0x1cfc00000-0x1cfdfffff] page 2M [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x1c0000000-0x1cfbfffff] [ 0.000000] [mem 0x1c0000000-0x1cfbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x1a0000000-0x1bfffffff] [ 0.000000] [mem 0x1a0000000-0x1bfffffff] page 2M [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0xa8942fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xa87fffff] page 2M [ 0.000000] [mem 0xa8800000-0xa8942fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xa9d40000-0xa9ebffff] [ 0.000000] [mem 0xa9d40000-0xa9ebffff] page 4k [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xa9fff000-0xa9ffffff] [ 0.000000] [mem 0xa9fff000-0xa9ffffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x19fffffff] [ 0.000000] [mem 0x100000000-0x19fffffff] page 2M [ 0.000000] RAMDISK: [mem 0x7fbe2000-0x7fffffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000A9FFE014 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000A9FFE120 00008C (v01 HPQOEM SLIC-MPC 0000000F 01000013) [ 0.000000] ACPI: FACP 0x00000000A9FFC000 00010C (v05 HPQOEM 17F6 0000000F HP 00000001) [ 0.000000] ACPI: DSDT 0x00000000A9FD5000 02154C (v02 HPQOEM 17F6 00000001 INTL 20110112) [ 0.000000] ACPI: FACS 0x00000000A9D35000 000040 [ 0.000000] ACPI: FACS 0x00000000A9D35000 000040 [ 0.000000] ACPI: HPET 0x00000000A9FFB000 000038 (v01 HPQOEM 17F6 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x00000000A9FFA000 0000BC (v01 HPQOEM 17F6 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x00000000A9FF9000 00003C (v01 HPQOEM 17F6 00000001 HP 00000001) [ 0.000000] ACPI: ASF! 0x00000000A9FF8000 0000A5 (v32 HPQOEM 17F6 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000A9FD2000 0002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000A9FD1000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112) [ 0.000000] ACPI: SLIC 0x00000000A9FD0000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: FPDT 0x00000000A9FCE000 000044 (v01 HPQOEM 17F6 00000001 HP 00000001) [ 0.000000] ACPI: BGRT 0x00000000A9FCD000 000038 (v00 HPQOEM 17F6 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000A9FCC000 000974 (v01 PmRef Cpu0Ist 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000A9FCB000 000AAD (v01 PmRef CpuPm 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000A9FCA000 000B50 (v01 SgRef SgTabl 00001000 INTL 20110112) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001cfdfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x1cfdf6000-0x1cfdf9fff] [ 0.000000] [ffffea0000000000-ffffea00073fffff] PMD -> [ffff8801c9400000-ffff8801cf3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000001cfdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000a8942fff] [ 0.000000] node 0: [mem 0x00000000a9d40000-0x00000000a9ebffff] [ 0.000000] node 0: [mem 0x00000000a9fff000-0x00000000a9ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001cfdfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001cfdfffff] [ 0.000000] On node 0 totalpages: 1542240 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10732 pages used for memmap [ 0.000000] DMA32 zone: 686788 pages, LIFO batch:31 [ 0.000000] Normal zone: 13304 pages used for memmap [ 0.000000] Normal zone: 851456 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xab200000-0xaf1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa8943000-0xa9d3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa9d8c000-0xa9d8cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xa9d99000-0xa9d99fff] [ 0.000000] PM: Registered nosave memory: [mem 0xa9d9a000-0xa9d9afff] [ 0.000000] PM: Registered nosave memory: [mem 0xa9daa000-0xa9daafff] [ 0.000000] PM: Registered nosave memory: [mem 0xa9dab000-0xa9dabfff] [ 0.000000] PM: Registered nosave memory: [mem 0xa9dba000-0xa9dbafff] [ 0.000000] PM: Registered nosave memory: [mem 0xa9ec0000-0xa9fbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xa9fc0000-0xa9ffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xaa000000-0xab1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xab200000-0xaf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xaf200000-0xe00f7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff] [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffebffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffec0000-0xffedefff] [ 0.000000] PM: Registered nosave memory: [mem 0xffedf000-0xffffffff] [ 0.000000] e820: [mem 0xaf200000-0xe00f7fff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff8801cfa00000 s95128 r8192 d31848 u262144 [ 0.000000] pcpu-alloc: s95128 r8192 d31848 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1518118 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux-lts.img root=/dev/sda2 rw radeon.dpm=1 drm.debug=0x06 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 5894380K/6168960K available (5660K kernel code, 898K rwdata, 1740K rodata, 1188K init, 1152K bss, 274580K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:8448 nr_irqs:488 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2494.271 MHz processor [ 0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.54 BogoMIPS (lpj=24942710) [ 0.000036] pid_max: default: 32768 minimum: 301 [ 0.000041] ACPI: Core revision 20150410 [ 0.010518] ACPI: All ACPI Tables successfully acquired [ 0.023891] Security Framework initialized [ 0.023898] Yama: becoming mindful. [ 0.024343] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.026292] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.027182] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.027192] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.027383] Initializing cgroup subsys blkio [ 0.027386] Initializing cgroup subsys memory [ 0.027392] Initializing cgroup subsys devices [ 0.027394] Initializing cgroup subsys freezer [ 0.027396] Initializing cgroup subsys net_cls [ 0.027417] CPU: Physical Processor ID: 0 [ 0.027418] CPU: Processor Core ID: 0 [ 0.027422] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.027423] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.027778] mce: CPU supports 7 MCE banks [ 0.027789] CPU0: Thermal monitoring enabled (TM1) [ 0.027795] process: using mwait in idle threads [ 0.027798] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.027799] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.028205] Freeing SMP alternatives memory: 20K (ffffffff81a0b000 - ffffffff81a10000) [ 0.084368] ftrace: allocating 21656 entries in 85 pages [ 0.094420] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.094881] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.195003] TSC deadline timer enabled [ 0.195007] smpboot: CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (fam: 06, model: 3a, stepping: 09) [ 0.195031] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.195050] ... version: 3 [ 0.195050] ... bit width: 48 [ 0.195051] ... generic registers: 4 [ 0.195052] ... value mask: 0000ffffffffffff [ 0.195053] ... max period: 0000ffffffffffff [ 0.195054] ... fixed-purpose events: 3 [ 0.195055] ... event mask: 000000070000000f [ 0.195528] x86: Booting SMP configuration: [ 0.195529] .... node #0, CPUs: #1 #2 [ 0.220532] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [ 0.223071] #3 [ 0.236734] x86: Booted up 1 node, 4 CPUs [ 0.236737] smpboot: Total of 4 processors activated (19954.16 BogoMIPS) [ 0.239834] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.240015] devtmpfs: initialized [ 0.242354] PM: Registering ACPI NVS region [mem 0xa9ec0000-0xa9fbffff] (1048576 bytes) [ 0.242439] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.242514] pinctrl core: initialized pinctrl subsystem [ 0.242551] RTC time: 14:30:37, date: 12/08/15 [ 0.242653] NET: Registered protocol family 16 [ 0.266770] cpuidle: using governor ladder [ 0.293097] cpuidle: using governor menu [ 0.293184] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.293186] ACPI: bus type PCI registered [ 0.293188] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.293266] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.293269] PCI: not using MMCONFIG [ 0.293270] PCI: Using configuration type 1 for base access [ 0.293447] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.293449] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.293450] mtrr: probably your BIOS does not setup all CPUs. [ 0.293451] mtrr: corrected configuration. [ 0.323432] ACPI: Added _OSI(Module Device) [ 0.323433] ACPI: Added _OSI(Processor Device) [ 0.323434] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.323436] ACPI: Added _OSI(Processor Aggregator Device) [ 0.326750] ACPI: Executed 1 blocks of module-level executable AML code [ 0.331869] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.337943] ACPI: Dynamic OEM Table Load: [ 0.337952] ACPI: SSDT 0xFFFF8801C7C2F000 000861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) [ 0.338502] ACPI: Dynamic OEM Table Load: [ 0.338507] ACPI: SSDT 0xFFFF8801C7CAB000 000303 (v01 PmRef ApIst 00003000 INTL 20110112) [ 0.338995] ACPI: Dynamic OEM Table Load: [ 0.339000] ACPI: SSDT 0xFFFF8801C7CDA200 000119 (v01 PmRef ApCst 00003000 INTL 20110112) [ 0.339929] ACPI : EC: EC started [ 2.034085] ACPI: Interpreter enabled [ 2.034093] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580) [ 2.034097] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580) [ 2.034110] ACPI: (supports S0 S3 S4 S5) [ 2.034111] ACPI: Using IOAPIC for interrupt routing [ 2.034125] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 2.034419] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 2.034741] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 2.036120] ACPI: Power Resource [APPR] (off) [ 2.037767] ACPI: Power Resource [COMP] (on) [ 2.037914] ACPI: Power Resource [LPP] (on) [ 2.040809] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 2.040814] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 2.042137] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 2.042139] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.042508] PCI host bridge to bus 0000:00 [ 2.042511] pci_bus 0000:00: root bus resource [bus 00-3e] [ 2.042512] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 2.042514] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 2.042516] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 2.042517] pci_bus 0000:00: root bus resource [mem 0xaf200000-0xdfffffff window] [ 2.042519] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window] [ 2.042520] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window] [ 2.042527] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 2.042613] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 2.042646] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 2.042716] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 2.042725] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] [ 2.042731] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 2.042736] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 2.042848] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 2.042867] pci 0000:00:14.0: reg 0x10: [mem 0xd0a00000-0xd0a0ffff 64bit] [ 2.042930] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 2.042967] pci 0000:00:14.0: System wakeup disabled by ACPI [ 2.043010] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 2.043029] pci 0000:00:1a.0: reg 0x10: [mem 0xd0a17000-0xd0a173ff] [ 2.043115] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.043153] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 2.043190] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 2.043206] pci 0000:00:1b.0: reg 0x10: [mem 0xd0a10000-0xd0a13fff 64bit] [ 2.043271] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 2.043342] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 2.043415] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.043489] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 2.043568] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 2.043608] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 2.043645] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 [ 2.043724] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 2.043762] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 2.043800] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400 [ 2.043879] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 2.043917] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 2.043956] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 2.043974] pci 0000:00:1d.0: reg 0x10: [mem 0xd0a16000-0xd0a163ff] [ 2.044060] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.044097] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 2.044133] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100 [ 2.044299] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 2.044315] pci 0000:00:1f.2: reg 0x10: [io 0x4068-0x406f] [ 2.044323] pci 0000:00:1f.2: reg 0x14: [io 0x4074-0x4077] [ 2.044331] pci 0000:00:1f.2: reg 0x18: [io 0x4060-0x4067] [ 2.044339] pci 0000:00:1f.2: reg 0x1c: [io 0x4070-0x4073] [ 2.044347] pci 0000:00:1f.2: reg 0x20: [io 0x4040-0x405f] [ 2.044355] pci 0000:00:1f.2: reg 0x24: [mem 0xd0a15000-0xd0a157ff] [ 2.044397] pci 0000:00:1f.2: PME# supported from D3hot [ 2.044501] pci 0000:01:00.0: [1002:6841] type 00 class 0x030000 [ 2.044515] pci 0000:01:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref] [ 2.044525] pci 0000:01:00.0: reg 0x18: [mem 0xd0900000-0xd091ffff 64bit] [ 2.044531] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff] [ 2.044542] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 2.044579] pci 0000:01:00.0: supports D1 D2 [ 2.062154] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.062172] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 2.062174] pci 0000:00:01.0: bridge window [mem 0xd0900000-0xd09fffff] [ 2.062177] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 2.062223] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 2.062229] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff] [ 2.062331] pci 0000:03:00.0: [197b:2392] type 00 class 0x088000 [ 2.062358] pci 0000:03:00.0: reg 0x10: [mem 0xd0703000-0xd07030ff] [ 2.062439] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref] [ 2.062611] pci 0000:03:00.2: [197b:2391] type 00 class 0x080501 [ 2.062644] pci 0000:03:00.2: reg 0x10: [mem 0xd0702000-0xd07020ff] [ 2.062924] pci 0000:03:00.3: [197b:2393] type 00 class 0x088000 [ 2.062952] pci 0000:03:00.3: reg 0x10: [mem 0xd0701000-0xd07010ff] [ 2.082220] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 2.082226] pci 0000:00:1c.2: bridge window [mem 0xd0700000-0xd07fffff] [ 2.082305] pci 0000:04:00.0: [1814:3290] type 00 class 0x028000 [ 2.082324] pci 0000:04:00.0: reg 0x10: [mem 0xd0610000-0xd061ffff] [ 2.082465] pci 0000:04:00.0: PME# supported from D0 D3hot [ 2.082495] pci 0000:04:00.0: System wakeup disabled by ACPI [ 2.082550] pci 0000:04:00.1: [1814:3298] type 00 class 0x0d1100 [ 2.082569] pci 0000:04:00.1: reg 0x10: [mem 0xd0600000-0xd060ffff] [ 2.082708] pci 0000:04:00.1: supports D1 [ 2.082710] pci 0000:04:00.1: PME# supported from D0 D1 D3hot [ 2.142314] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 2.142321] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd06fffff] [ 2.142395] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 2.142418] pci 0000:05:00.0: reg 0x10: [io 0x2000-0x20ff] [ 2.142452] pci 0000:05:00.0: reg 0x18: [mem 0xd0404000-0xd0404fff 64bit pref] [ 2.142474] pci 0000:05:00.0: reg 0x20: [mem 0xd0400000-0xd0403fff 64bit pref] [ 2.142577] pci 0000:05:00.0: supports D1 D2 [ 2.142579] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.142616] pci 0000:05:00.0: System wakeup disabled by ACPI [ 2.162303] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 2.162308] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 2.162312] pci 0000:00:1c.5: bridge window [mem 0xd0500000-0xd05fffff] [ 2.162318] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff 64bit pref] [ 2.163096] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.163139] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.163180] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.163222] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.163261] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.163300] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.163339] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.163378] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 2.163601] ACPI: Enabled 5 GPEs in block 00 to 3F [ 2.163642] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 2.163737] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 2.163739] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 2.163743] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 2.163745] vgaarb: loaded [ 2.163746] vgaarb: bridge control possible 0000:01:00.0 [ 2.163746] vgaarb: no bridge control possible 0000:00:02.0 [ 2.163842] PCI: Using ACPI for IRQ routing [ 2.170152] PCI: pci_cache_line_size set to 64 bytes [ 2.170216] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 2.170218] e820: reserve RAM buffer [mem 0xa8943000-0xabffffff] [ 2.170220] e820: reserve RAM buffer [mem 0xa9d8c018-0xabffffff] [ 2.170221] e820: reserve RAM buffer [mem 0xa9d9a018-0xabffffff] [ 2.170222] e820: reserve RAM buffer [mem 0xa9dab018-0xabffffff] [ 2.170224] e820: reserve RAM buffer [mem 0xa9ec0000-0xabffffff] [ 2.170225] e820: reserve RAM buffer [mem 0xaa000000-0xabffffff] [ 2.170226] e820: reserve RAM buffer [mem 0x1cfe00000-0x1cfffffff] [ 2.170330] NetLabel: Initializing [ 2.170331] NetLabel: domain hash size = 128 [ 2.170332] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.170342] NetLabel: unlabeled traffic allowed by default [ 2.170369] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 2.170373] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 2.172409] Switched to clocksource hpet [ 2.176937] pnp: PnP ACPI init [ 2.177104] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 2.177107] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved [ 2.177109] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 2.177110] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 2.177112] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved [ 2.177114] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 2.177116] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 2.177118] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 2.177120] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 2.177124] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.177282] system 00:01: [io 0xfe00-0xfe0f] has been reserved [ 2.177284] system 00:01: [io 0xfe80-0xfe8f] has been reserved [ 2.177286] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 2.177288] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.177356] system 00:02: [io 0x0200-0x027f] has been reserved [ 2.177357] system 00:02: [io 0x1000-0x100f] has been reserved [ 2.177359] system 00:02: [io 0xffff] has been reserved [ 2.177361] system 00:02: [io 0xffff] has been reserved [ 2.177362] system 00:02: [io 0x0400-0x047f] could not be reserved [ 2.177364] system 00:02: [io 0x0500-0x057f] has been reserved [ 2.177365] system 00:02: [io 0xef80-0xef9f] has been reserved [ 2.177368] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 2.177396] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 2.177499] pnp 00:04: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 2.177522] pnp 00:05: Plug and Play ACPI device, IDs SYN0197 SYN0100 SYN0002 PNP0f13 (active) [ 2.177731] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved [ 2.177733] system 00:06: [mem 0x40004000-0x40004fff] could not be reserved [ 2.177735] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 2.177871] pnp: PnP ACPI: found 7 devices [ 2.184187] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 2.184195] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 2.184197] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window [ 2.184238] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0920000-0xd093ffff pref] [ 2.184240] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.184243] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 2.184245] pci 0000:00:01.0: bridge window [mem 0xd0900000-0xd09fffff] [ 2.184248] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref] [ 2.184251] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 2.184256] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff] [ 2.184266] pci 0000:03:00.0: BAR 6: assigned [mem 0xd0710000-0xd071ffff pref] [ 2.184267] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 2.184273] pci 0000:00:1c.2: bridge window [mem 0xd0700000-0xd07fffff] [ 2.184281] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 2.184286] pci 0000:00:1c.3: bridge window [mem 0xd0600000-0xd06fffff] [ 2.184295] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 2.184298] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 2.184303] pci 0000:00:1c.5: bridge window [mem 0xd0500000-0xd05fffff] [ 2.184307] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff 64bit pref] [ 2.184314] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 2.184316] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 2.184318] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 2.184319] pci_bus 0000:00: resource 7 [mem 0xaf200000-0xdfffffff window] [ 2.184321] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window] [ 2.184322] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window] [ 2.184324] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 2.184325] pci_bus 0000:01: resource 1 [mem 0xd0900000-0xd09fffff] [ 2.184327] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref] [ 2.184329] pci_bus 0000:02: resource 1 [mem 0xd0800000-0xd08fffff] [ 2.184330] pci_bus 0000:03: resource 1 [mem 0xd0700000-0xd07fffff] [ 2.184332] pci_bus 0000:04: resource 1 [mem 0xd0600000-0xd06fffff] [ 2.184334] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] [ 2.184335] pci_bus 0000:05: resource 1 [mem 0xd0500000-0xd05fffff] [ 2.184337] pci_bus 0000:05: resource 2 [mem 0xd0400000-0xd04fffff 64bit pref] [ 2.184368] NET: Registered protocol family 2 [ 2.184533] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 2.184671] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.184797] TCP: Hash tables configured (established 65536 bind 65536) [ 2.184822] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 2.184847] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 2.184901] NET: Registered protocol family 1 [ 2.184914] pci 0000:00:02.0: Video device with shadowed ROM [ 2.184922] pci 0000:00:14.0: enabling device (0000 -> 0002) [ 2.185020] pci 0000:00:14.0: can't derive routing for PCI INT A [ 2.185021] pci 0000:00:14.0: PCI INT A: no GSI [ 2.185475] PCI: CLS 64 bytes, default 64 [ 2.185517] Unpacking initramfs... [ 2.241255] Freeing initrd memory: 4216K (ffff88007fbe2000 - ffff880080000000) [ 2.241264] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.241266] software IO TLB [mem 0xa012e000-0xa412e000] (64MB) mapped at [ffff8800a012e000-ffff8800a412dfff] [ 2.241315] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 2.241316] hw unit of domain pp0-core 2^-16 Joules [ 2.241317] hw unit of domain package 2^-16 Joules [ 2.241318] hw unit of domain pp1-gpu 2^-16 Joules [ 2.241445] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1b [ 2.241452] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1b [ 2.241456] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1b [ 2.241462] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1b [ 2.241508] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 2.241537] Scanning for low memory corruption every 60 seconds [ 2.241803] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 2.241825] Initialise system trusted keyring [ 2.242157] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.243422] zpool: loaded [ 2.243425] zbud: loaded [ 2.243568] VFS: Disk quotas dquot_6.6.0 [ 2.243598] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.243735] Key type big_key registered [ 2.243921] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.243953] io scheduler noop registered [ 2.243957] io scheduler deadline registered (default) [ 2.243985] io scheduler cfq registered [ 2.244225] pcieport 0000:00:1c.0: enabling device (0000 -> 0002) [ 2.244895] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 2.244897] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.244899] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 2.244916] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 2.244920] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 2.244936] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 2.244938] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 2.244939] pci 0000:03:00.2: Signaling PME through PCIe PME interrupt [ 2.244941] pci 0000:03:00.3: Signaling PME through PCIe PME interrupt [ 2.244945] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 2.244961] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 2.244963] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 2.244964] pci 0000:04:00.1: Signaling PME through PCIe PME interrupt [ 2.244969] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 2.244985] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 2.244986] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt [ 2.244990] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 2.244995] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.245009] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.245024] efifb: probing for efifb [ 2.245041] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90001000000, using 4128k, total 4128k [ 2.245042] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 2.245043] efifb: scrolling: redraw [ 2.245045] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.247523] Console: switching to colour frame buffer device 170x48 [ 2.249819] fb0: EFI VGA frame buffer device [ 2.249827] intel_idle: MWAIT substates: 0x21120 [ 2.249828] intel_idle: v0.4 model 0x3A [ 2.249829] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.250000] GHES: HEST is not enabled! [ 2.250058] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.250441] Linux agpgart interface v0.103 [ 2.250716] rtc_cmos 00:03: RTC can wake from S4 [ 2.250834] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.250863] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.250873] Intel P-state driver initializing. [ 2.250980] ledtrig-cpu: registered to indicate activity on CPUs [ 2.251510] NET: Registered protocol family 10 [ 2.251826] NET: Registered protocol family 17 [ 2.252403] Loading compiled-in X.509 certificates [ 2.252428] registered taskstats version 1 [ 2.253145] Magic number: 11:599:535 [ 2.253247] rtc_cmos 00:03: setting system clock to 2015-12-08 14:30:39 UTC (1449585039) [ 2.253356] PM: Hibernation image not present or could not be loaded. [ 2.253745] Freeing unused kernel memory: 1188K (ffffffff818e2000 - ffffffff81a0b000) [ 2.253747] Write protecting the kernel read-only data: 8192k [ 2.254123] Freeing unused kernel memory: 472K (ffff88000158a000 - ffff880001600000) [ 2.254252] Freeing unused kernel memory: 308K (ffff8800017b3000 - ffff880001800000) [ 2.264287] random: systemd-tmpfile urandom read with 4 bits of entropy available [ 2.305194] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.307052] i8042: Detected active multiplexing controller, rev 1.1 [ 2.307809] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.307818] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 2.307822] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 2.307825] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 2.307828] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 2.313914] ACPI: bus type USB registered [ 2.313950] usbcore: registered new interface driver usbfs [ 2.313970] usbcore: registered new interface driver hub [ 2.314004] usbcore: registered new device driver usb [ 2.314435] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.314738] ehci-pci: EHCI PCI platform driver [ 2.314991] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.315005] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.315023] ehci-pci 0000:00:1a.0: debug port 2 [ 2.316184] sdhci: Secure Digital Host Controller Interface driver [ 2.316186] sdhci: Copyright(c) Pierre Ossman [ 2.316467] sdhci-pci 0000:03:00.0: SDHCI controller found [197b:2392] (rev 30) [ 2.316483] sdhci-pci 0000:03:00.0: enabling device (0000 -> 0002) [ 2.316597] sdhci-pci 0000:03:00.0: No vmmc regulator found [ 2.316599] sdhci-pci 0000:03:00.0: No vqmmc regulator found [ 2.317765] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA [ 2.317789] sdhci-pci 0000:03:00.2: SDHCI controller found [197b:2391] (rev 30) [ 2.317856] sdhci-pci 0000:03:00.2: Refusing to bind to secondary interface. [ 2.318290] SCSI subsystem initialized [ 2.318949] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 2.318967] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd0a17000 [ 2.319683] libata version 3.00 loaded. [ 2.333033] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.333326] hub 1-0:1.0: USB hub found [ 2.333344] hub 1-0:1.0: 2 ports detected [ 2.333723] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.333733] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.333747] ehci-pci 0000:00:1d.0: debug port 2 [ 2.337644] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.337652] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd0a16000 [ 2.352668] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.353330] hub 2-0:1.0: USB hub found [ 2.353348] hub 2-0:1.0: 2 ports detected [ 2.353842] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 2.353847] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 2.353880] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.353889] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.353995] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 2.354006] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.354334] hub 3-0:1.0: USB hub found [ 2.354354] hub 3-0:1.0: 4 ports detected [ 2.354757] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.354762] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 2.354993] hub 4-0:1.0: USB hub found [ 2.355011] hub 4-0:1.0: 4 ports detected [ 2.355463] ahci 0000:00:1f.2: version 3.0 [ 2.355698] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 2.355731] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode [ 2.355736] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst [ 2.364692] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.373678] scsi host0: ahci [ 2.373913] scsi host1: ahci [ 2.374038] scsi host2: ahci [ 2.374168] scsi host3: ahci [ 2.374292] scsi host4: ahci [ 2.374416] scsi host5: ahci [ 2.374491] ata1: SATA max UDMA/133 abar m2048@0xd0a15000 port 0xd0a15100 irq 30 [ 2.374494] ata2: SATA max UDMA/133 abar m2048@0xd0a15000 port 0xd0a15180 irq 30 [ 2.374496] ata3: DUMMY [ 2.374497] ata4: DUMMY [ 2.374499] ata5: DUMMY [ 2.374500] ata6: DUMMY [ 2.653001] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.673030] usb 3-3: new low-speed USB device number 2 using xhci_hcd [ 2.673033] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.723106] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.724686] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.724864] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100 [ 2.724870] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.726561] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 2.726737] ata1.00: configured for UDMA/100 [ 2.743430] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54757 A50A PQ: 0 ANSI: 5 [ 2.804044] hub 1-1:1.0: USB hub found [ 2.804203] hub 1-1:1.0: 6 ports detected [ 2.816547] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.818415] hidraw: raw HID events driver (C) Jiri Kosina [ 2.820737] usbcore: registered new interface driver usbhid [ 2.820743] usbhid: USB HID core driver [ 2.821641] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:0461:4D0F.0001/input/input5 [ 2.821763] hid-generic 0003:0461:4D0F.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-3/input0 [ 2.824199] hub 2-1:1.0: USB hub found [ 2.824450] hub 2-1:1.0: 6 ports detected [ 3.083537] usb 1-1.3: new high-speed USB device number 3 using ehci-pci [ 3.093525] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.097304] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 3.097312] ata2.00: ATAPI: hp DVD A DS8A8SH, KH62, max UDMA/100 [ 3.098833] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 3.098844] ata2.00: configured for UDMA/100 [ 3.118519] scsi 1:0:0:0: CD-ROM hp DVD A DS8A8SH KH62 PQ: 0 ANSI: 5 [ 3.133562] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 3.133569] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.133752] sd 0:0:0:0: [sda] Write Protect is off [ 3.133757] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.133837] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.149415] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.149419] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.149569] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.171286] sda: sda1 sda2 sda3 sda4 sda5 [ 3.172329] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.233673] tsc: Refined TSC clocksource calibration: 2494.334 MHz [ 3.233679] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45126d86, max_idle_ns: 440795256522 ns [ 4.173185] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.234964] Switched to clocksource tsc [ 5.070436] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.545926] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 5.546180] systemd[1]: Detected architecture x86-64. [ 5.568936] systemd[1]: Set hostname to . [ 7.081370] systemd[1]: bluetooth.service: Cannot add dependency job, ignoring: Unit bluetooth.service is masked. [ 7.081381] systemd[1]: NetworkManager.service: Cannot add dependency job, ignoring: Unit NetworkManager.service is masked. [ 7.081397] systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service is masked. [ 7.082157] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 7.082418] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 7.082553] systemd[1]: Reached target Swap. [ 7.082661] systemd[1]: Reached target Encrypted Volumes. [ 7.082824] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 7.113033] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.113206] systemd[1]: Listening on udev Control Socket. [ 7.113359] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.113477] systemd[1]: Reached target Paths. [ 7.113751] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.113914] systemd[1]: Listening on LVM2 metadata daemon socket. [ 7.114535] systemd[1]: Created slice User and Session Slice. [ 7.114650] systemd[1]: Reached target Remote File Systems. [ 7.114772] systemd[1]: Listening on udev Kernel Socket. [ 7.114907] systemd[1]: Listening on Journal Socket. [ 7.115407] systemd[1]: Created slice System Slice. [ 7.115924] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 7.132241] systemd[1]: Mounting POSIX Message Queue File System... [ 7.132814] systemd[1]: Created slice system-netctl.slice. [ 7.133420] systemd[1]: Created slice system-getty.slice. [ 7.134421] systemd[1]: Mounting Debug File System... [ 7.135424] systemd[1]: Starting Setup Virtual Console... [ 7.136443] systemd[1]: Mounting Huge Pages File System... [ 7.168673] systemd[1]: Mounting Temporary Directory... [ 7.169557] systemd[1]: Starting Journal Service... [ 7.170386] systemd[1]: Starting Remount Root and Kernel File Systems... [ 7.170475] systemd[1]: Reached target Slices. [ 7.243754] systemd[1]: Starting Load Kernel Modules... [ 7.244878] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 7.348644] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 7.423418] systemd[1]: Started Setup Virtual Console. [ 7.496173] systemd[1]: Mounted Debug File System. [ 7.501890] EXT4-fs (sda2): re-mounted. Opts: data=ordered [ 7.502915] systemd[1]: Mounted Huge Pages File System. [ 7.503130] systemd[1]: Mounted POSIX Message Queue File System. [ 7.503312] systemd[1]: Mounted Temporary Directory. [ 7.504866] systemd[1]: Started Remount Root and Kernel File Systems. [ 7.513046] systemd[1]: Starting Load/Save Random Seed... [ 7.515112] systemd[1]: Starting Create Static Device Nodes in /dev... [ 7.531390] FS-Cache: Loaded [ 7.566069] systemd[1]: Starting udev Coldplug all Devices... [ 7.615547] systemd[1]: Started Load/Save Random Seed. [ 7.649900] RPC: Registered named UNIX socket transport module. [ 7.649904] RPC: Registered udp transport module. [ 7.649906] RPC: Registered tcp transport module. [ 7.649908] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.652514] systemd[1]: Started udev Coldplug all Devices. [ 7.807762] FS-Cache: Netfs 'nfs' registered for caching [ 7.809277] systemd[1]: Started Load Kernel Modules. [ 7.812581] systemd[1]: Mounting Configuration File System... [ 7.814575] systemd[1]: Starting Apply Kernel Variables... [ 7.817711] systemd[1]: Mounted Configuration File System. [ 8.098566] systemd[1]: Started Apply Kernel Variables. [ 8.202581] systemd[1]: Started Create Static Device Nodes in /dev. [ 8.205819] systemd[1]: Reached target Local File Systems (Pre). [ 8.208516] systemd[1]: Starting udev Kernel Device Manager... [ 8.359615] random: nonblocking pool is initialized [ 9.202027] systemd[1]: Started udev Kernel Device Manager. [ 9.368875] ACPI: AC Adapter [AC] (on-line) [ 9.538620] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6 [ 9.538625] ACPI: Sleep Button [SLPB] [ 9.538670] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input7 [ 9.538707] ACPI: Lid Switch [LID] [ 9.538746] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8 [ 9.538749] ACPI: Power Button [PWRF] [ 9.621244] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150410/utaddress-254) [ 9.621253] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.621257] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254) [ 9.621262] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEGP.DGFX.GPIO) (20150410/utaddress-254) [ 9.621266] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.621268] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254) [ 9.621272] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEGP.DGFX.GPIO) (20150410/utaddress-254) [ 9.621276] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.621277] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254) [ 9.621281] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEGP.DGFX.GPIO) (20150410/utaddress-254) [ 9.621284] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.621286] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 9.621385] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.621582] Initializing HPQ6001 module [ 9.621650] input: HP Wireless hotkeys as /devices/virtual/input/input9 [ 9.722097] hp_accel: laptop model unknown, using default axes configuration [ 9.877550] [drm] Initialized drm 1.1.0 20060810 [ 9.885477] lis3lv02d: 8 bits 3DC sensor found [ 9.916687] ACPI: Battery Slot [BAT0] (battery present) [ 9.916958] wmi: Mapper loaded [ 9.962722] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0166 rev=0x09 flags=is_mobile,need_gfx_hws,is_ivybridge,has_fbc,has_hotplug,has_llc, [ 9.962741] [drm:intel_detect_pch] Found PantherPoint PCH [ 9.962822] [drm] Memory usable by graphics device = 2048M [ 9.962824] [drm:i915_gem_gtt_init] GMADR size = 256M [ 9.962825] [drm:i915_gem_gtt_init] GTT stolen size = 64M [ 9.962827] [drm:i915_gem_gtt_init] ppgtt mode: 1 [ 9.962829] checking generic (c0000000 408000) vs hw (c0000000 10000000) [ 9.962830] fb: switching to inteldrmfb from EFI VGA [ 9.962863] Console: switching to colour dummy device 80x25 [ 9.962936] [drm] Replacing VGA console driver [ 9.963396] [drm:intel_opregion_setup] graphic opregion physical addr: 0xa9fb6018 [ 9.963402] [drm:intel_opregion_setup] Public ACPI methods supported [ 9.963402] [drm:intel_opregion_setup] SWSCI supported [ 9.969428] [drm:swsci_setup] SWSCI GBDA callbacks 000000b3, SBCB callbacks 00000081 [ 9.969429] [drm:intel_opregion_setup] ASLE supported [ 9.969466] [drm:intel_device_info_runtime_init] slice total: 0 [ 9.969467] [drm:intel_device_info_runtime_init] subslice total: 0 [ 9.969468] [drm:intel_device_info_runtime_init] subslice per slice: 0 [ 9.969469] [drm:intel_device_info_runtime_init] EU total: 0 [ 9.969470] [drm:intel_device_info_runtime_init] EU per subslice: 0 [ 9.969471] [drm:intel_device_info_runtime_init] has slice power gating: n [ 9.969472] [drm:intel_device_info_runtime_init] has subslice power gating: n [ 9.969473] [drm:intel_device_info_runtime_init] has EU power gating: n [ 9.969474] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.969474] [drm] Driver supports precise vblank timestamp query. [ 9.969476] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz [ 9.969478] [drm:validate_vbt] Using VBT from OpRegion: $VBT SNB/IVB-MOBILE d [ 9.969480] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 9.969481] [drm:parse_general_definitions] crt_ddc_bus_pin: 2 [ 9.969483] [drm:parse_lfp_panel_data] DRRS supported mode is static [ 9.969484] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [ 9.969487] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [ 9.969488] [drm:parse_lfp_panel_data] VBT initial LVDS value 300 [ 9.969489] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 280 Hz, active high, min brightness 15, level 255 [ 9.969491] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [ 9.969493] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 9.969494] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT [ 9.969495] [drm:parse_driver_features] DRRS State Enabled:1 [ 9.969515] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 9.969518] [drm:intel_dsm_pci_probe] no _DSM method for intel device [ 9.969522] [drm:i915_gem_init_stolen] found 67108864 bytes of stolen memory at ab200000 [ 9.969524] [drm:intel_display_power_get] enabling always-on [ 9.969560] [drm:intel_print_wm_latency] Primary WM0 latency 12 (1.2 usec) [ 9.969562] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec) [ 9.969563] [drm:intel_print_wm_latency] Primary WM2 latency 16 (8.0 usec) [ 9.969564] [drm:intel_print_wm_latency] Primary WM3 latency 32 (16.0 usec) [ 9.969565] [drm:intel_print_wm_latency] Sprite WM0 latency 12 (1.2 usec) [ 9.969566] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec) [ 9.969567] [drm:intel_print_wm_latency] Sprite WM2 latency 16 (8.0 usec) [ 9.969568] [drm:intel_print_wm_latency] Sprite WM3 latency 32 (16.0 usec) [ 9.969569] [drm:intel_print_wm_latency] Cursor WM0 latency 12 (1.2 usec) [ 9.969570] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec) [ 9.969571] [drm:intel_print_wm_latency] Cursor WM2 latency 16 (8.0 usec) [ 9.969572] [drm:intel_print_wm_latency] Cursor WM3 latency 64 (32.0 usec) [ 9.969575] [drm:intel_modeset_init] SSC enabled by BIOS, overriding VBT which says disabled [ 9.969577] [drm:intel_modeset_init] 3 display pipes available. [ 9.969589] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 9.982655] [drm:intel_lvds_init] using preferred mode from EDID: [ 9.982662] [drm:drm_mode_debug_printmodeline] Modeline 33:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 9.982679] [drm:intel_lvds_init] detected single-link lvds configuration [ 9.982726] [drm:intel_panel_setup_backlight] Connector LVDS-1 backlight initialized, enabled, brightness 3487/3487 [ 9.982773] [drm:intel_crt_reset] crt adpa set to 0xf40000 [ 9.982825] [drm:intel_dp_init_connector] Adding DP connector on port D [ 9.982857] [drm:intel_dp_aux_init] registering DPDDC-D bus for card0-DP-1 [ 9.982907] [drm:ironlake_init_pch_refclk] has_panel 1 has_lvds 1 has_ck505 0 [ 9.982910] [drm:ironlake_init_pch_refclk] Using SSC on panel [ 9.983330] [drm:intel_modeset_readout_hw_state] [CRTC:20] hw state readout: enabled [ 9.983332] [drm:intel_modeset_readout_hw_state] [CRTC:24] hw state readout: disabled [ 9.983334] [drm:intel_modeset_readout_hw_state] [CRTC:28] hw state readout: disabled [ 9.983340] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: crtc_mask 0x00000001, on 1 [ 9.983345] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: crtc_mask 0x00000000, on 0 [ 9.983351] [drm:intel_modeset_readout_hw_state] [ENCODER:31:LVDS-31] hw state readout: enabled, pipe A [ 9.983355] [drm:intel_modeset_readout_hw_state] [ENCODER:39:DAC-39] hw state readout: disabled, pipe A [ 9.983359] [drm:intel_modeset_readout_hw_state] [ENCODER:40:TMDS-40] hw state readout: disabled, pipe A [ 9.983362] [drm:intel_modeset_readout_hw_state] [ENCODER:45:TMDS-45] hw state readout: disabled, pipe A [ 9.983366] [drm:intel_modeset_readout_hw_state] [CONNECTOR:30:LVDS-1] hw state readout: enabled [ 9.983369] [drm:intel_modeset_readout_hw_state] [CONNECTOR:38:VGA-1] hw state readout: disabled [ 9.983373] [drm:intel_modeset_readout_hw_state] [CONNECTOR:41:HDMI-A-1] hw state readout: disabled [ 9.983377] [drm:intel_modeset_readout_hw_state] [CONNECTOR:46:DP-1] hw state readout: disabled [ 9.983381] [drm:intel_dump_pipe_config] [CRTC:20][setup_hw_state] config for pipe A [ 9.983382] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 9.983384] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0 [ 9.983387] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 5340747, gmch_n: 8388608, link_m: 148354, link_n: 524288, tu: 64 [ 9.983389] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9.983391] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 9.983393] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 9.983394] [drm:intel_dump_pipe_config] requested mode: [ 9.983397] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 1366 0 0 0 768 0 0 0 0x0 0x0 [ 9.983399] [drm:intel_dump_pipe_config] adjusted mode: [ 9.983401] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x9 [ 9.983404] [drm:intel_dump_crtc_timings] crtc timings: 76190 1366 1402 1450 1610 768 771 776 790, type: 0x0 flags: 0x9 [ 9.983406] [drm:intel_dump_pipe_config] port clock: 76190 [ 9.983408] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 9.983410] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 9.983412] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x05560300, enabled [ 9.983413] [drm:intel_dump_pipe_config] ips: 0 [ 9.983414] [drm:intel_dump_pipe_config] double wide: 0 [ 9.983417] [drm:intel_dump_pipe_config] [CRTC:24][setup_hw_state] config for pipe B [ 9.983418] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 9.983420] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 9.983422] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9.983424] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9.983426] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 9.983428] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 9.983429] [drm:intel_dump_pipe_config] requested mode: [ 9.983432] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 9.983433] [drm:intel_dump_pipe_config] adjusted mode: [ 9.983436] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 9.983438] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 9.983440] [drm:intel_dump_pipe_config] port clock: 0 [ 9.983441] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 9.983443] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 9.983445] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 9.983446] [drm:intel_dump_pipe_config] ips: 0 [ 9.983448] [drm:intel_dump_pipe_config] double wide: 0 [ 9.983450] [drm:intel_dump_pipe_config] [CRTC:28][setup_hw_state] config for pipe C [ 9.983451] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 9.983453] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 9.983454] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9.983456] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 9.983458] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 9.983459] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 9.983460] [drm:intel_dump_pipe_config] requested mode: [ 9.983463] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 9.983465] [drm:intel_dump_pipe_config] adjusted mode: [ 9.983467] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 9.983470] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 9.983471] [drm:intel_dump_pipe_config] port clock: 0 [ 9.983473] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 9.983474] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 9.983476] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 9.983478] [drm:intel_dump_pipe_config] ips: 0 [ 9.983479] [drm:intel_dump_pipe_config] double wide: 0 [ 9.983485] [drm:intel_connector_check_state] [CONNECTOR:30:LVDS-1] [ 9.983491] [drm:check_encoder_state] [ENCODER:31:LVDS-31] [ 9.983494] [drm:check_encoder_state] [ENCODER:39:DAC-39] [ 9.983498] [drm:check_encoder_state] [ENCODER:40:TMDS-40] [ 9.983501] [drm:check_encoder_state] [ENCODER:45:TMDS-45] [ 9.983504] [drm:check_crtc_state] [CRTC:20] [ 9.983518] [drm:check_crtc_state] [CRTC:24] [ 9.983520] [drm:check_crtc_state] [CRTC:28] [ 9.983522] [drm:check_shared_dpll_state] PCH DPLL A [ 9.983527] [drm:check_shared_dpll_state] PCH DPLL B [ 9.983535] [drm:ironlake_get_initial_plane_config] pipe A with fb: size=1366x768@32, offset=0, pitch 5504, size 0x408000 [ 9.983538] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=408000 [ 9.983543] [drm:i915_pages_create_for_stolen] offset=0x0, size=4227072 [ 9.983547] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff88009e5ac000 [ 9.983841] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 408000 [ 9.983844] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [408000, 7ffff000] [ 9.986636] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0 [ 9.986660] [drm:i915_gem_context_init] HW context support initialized [ 9.986668] [drm:init_status_page] render ring hws offset: 0x7fff2000 [ 9.986735] [drm:intel_init_pipe_control] render ring pipe control offset: 0x00428000 [ 9.986741] [drm:init_status_page] bsd ring hws offset: 0x00429000 [ 9.986790] [drm:init_status_page] blitter ring hws offset: 0x0044a000 [ 9.989042] [drm:intel_backlight_device_register] Connector LVDS-1 backlight sysfs interface registered [ 9.989083] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:LVDS-1] [ 9.989086] [drm:intel_lvds_detect] [CONNECTOR:30:LVDS-1] [ 9.989088] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:LVDS-1] status updated from 3 to 1 [ 9.989101] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:LVDS-1] probed modes : [ 9.989103] [drm:drm_mode_debug_printmodeline] Modeline 33:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 9.989105] [drm:drm_mode_debug_printmodeline] Modeline 34:"1366x768" 40 50930 1366 1402 1450 1610 768 771 776 790 0x40 0x9 [ 9.989106] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:VGA-1] [ 9.989108] [drm:intel_crt_detect] [CONNECTOR:38:VGA-1] force=1 [ 9.989111] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000 [ 9.989276] [Firmware Bug]: ACPI(DGFX) defines _DOD but not _DOS [ 9.989719] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no) [ 9.989888] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input10 [ 9.999195] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 9.999201] [drm:intel_crt_detect] CRT not detected via hotplug [ 9.999376] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 9.999380] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 9.999545] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 9.999549] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 9.999552] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 9.999555] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 9.999927] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 9.999928] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 9.999929] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 9.999930] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:VGA-1] status updated from 3 to 2 [ 9.999933] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:VGA-1] disconnected [ 9.999935] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1] [ 9.999936] [drm:intel_hdmi_detect] [CONNECTOR:41:HDMI-A-1] [ 10.000095] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 10.000097] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 10.000256] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 10.000258] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 10.000262] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1] status updated from 3 to 2 [ 10.000264] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1] disconnected [ 10.000267] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:46:DP-1] [ 10.000270] [drm:intel_dp_detect] [CONNECTOR:46:DP-1] [ 10.000275] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:46:DP-1] status updated from 3 to 2 [ 10.000278] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:46:DP-1] disconnected [ 10.000290] [drm:drm_setup_crtcs] [ 10.000291] [drm:drm_enable_connectors] connector 30 enabled? yes [ 10.000292] [drm:drm_enable_connectors] connector 38 enabled? no [ 10.000293] [drm:drm_enable_connectors] connector 41 enabled? no [ 10.000294] [drm:drm_enable_connectors] connector 46 enabled? no [ 10.000296] [drm:intel_fb_initial_config] looking for cmdline mode on connector LVDS-1 [ 10.000297] [drm:intel_fb_initial_config] looking for preferred mode on connector LVDS-1 0 [ 10.000299] [drm:intel_fb_initial_config] connector LVDS-1 on pipe A [CRTC:20]: 1366x768 [ 10.000300] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping [ 10.000301] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 10.000302] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 10.000303] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 20 (0,0) [ 10.000305] [drm:intelfb_create] no BIOS fb, allocating a new one [ 10.000307] [drm:i915_gem_object_create_stolen] creating stolen object: size=408000 [ 10.000310] [drm:i915_pages_create_for_stolen] offset=0x408000, size=4227072 [ 10.000875] [drm:intelfb_create] allocated 1366x768 fb: 0x0046b000, bo ffff88009e5acfc0 [ 10.000945] fbcon: inteldrmfb (fb0) is primary device [ 10.001003] [drm:intel_fbc_update] disabled per chip default [ 10.001022] [drm:intel_crtc_set_config] [CRTC:20] [FB:49] #connectors=1 (x y) (0 0) [ 10.001023] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set [ 10.001026] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 10.001028] [drm:drm_mode_debug_printmodeline] Modeline 48:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 10.001030] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=1, fb_changed=1 [ 10.001032] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 10.001036] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 10.001038] [drm:connected_sink_compute_bpp] [CONNECTOR:30:LVDS-1] checking for sink bpp constrains [ 10.001040] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 10.001042] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 10.001044] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 10.001045] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 10.001046] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 10.001047] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 10.001049] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2670373, gmch_n: 4194304, link_m: 148354, link_n: 524288, tu: 64 [ 10.001050] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 10.001051] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 10.001052] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 10.001053] [drm:intel_dump_pipe_config] requested mode: [ 10.001055] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 10.001056] [drm:intel_dump_pipe_config] adjusted mode: [ 10.001058] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 10.001060] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9 [ 10.001061] [drm:intel_dump_pipe_config] port clock: 76400 [ 10.001062] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 10.001063] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 10.001064] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 10.001065] [drm:intel_dump_pipe_config] ips: 0 [ 10.001066] [drm:intel_dump_pipe_config] double wide: 0 [ 10.001068] [drm:ironlake_get_refclk] using SSC reference clock of 120000 kHz [ 10.001084] [drm:intel_get_shared_dpll] CRTC:20 allocated PCH DPLL A [ 10.001085] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A [ 10.001089] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 10.198198] thermal LNXTHERM:00: registered as thermal_zone0 [ 10.198200] ACPI: Thermal Zone [CPUZ] (48 C) [ 10.245245] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 20 [ 10.245251] [drm:intel_disable_shared_dpll] disabling PCH DPLL A [ 10.245704] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A [ 10.246436] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR before link train 0x715 [ 10.246446] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x715 [ 10.246448] [drm:ivb_manual_fdi_link_train] FDI train 1 done, level 0. [ 10.246457] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x600 [ 10.246459] [drm:ivb_manual_fdi_link_train] FDI train 2 done, level 0. [ 10.246460] [drm:ivb_manual_fdi_link_train] FDI train done. [ 10.246464] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0) for crtc 20 [ 10.246465] [drm:intel_enable_shared_dpll] enabling PCH DPLL A [ 10.421348] [drm] radeon kernel modesetting enabled. [ 10.421362] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle [ 10.542283] AMD IOMMUv2 driver by Joerg Roedel [ 10.542284] AMD IOMMUv2 functionality not available on this system [ 10.577658] CRAT table not found [ 10.577660] Finished initializing topology ret=0 [ 10.577717] kfd kfd: Initialized module [ 10.692952] [drm:intel_panel_enable_backlight] pipe A [ 10.692959] [drm:intel_panel_actually_set_backlight] set backlight PWM = 3487 [ 10.693486] [drm:intel_connector_check_state] [CONNECTOR:30:LVDS-1] [ 10.693496] [drm:check_encoder_state] [ENCODER:31:LVDS-31] [ 10.693499] [drm:check_encoder_state] [ENCODER:39:DAC-39] [ 10.693502] [drm:check_encoder_state] [ENCODER:40:TMDS-40] [ 10.693505] [drm:check_encoder_state] [ENCODER:45:TMDS-45] [ 10.693509] [drm:check_crtc_state] [CRTC:20] [ 10.693526] [drm:check_crtc_state] [CRTC:24] [ 10.693527] [drm:check_crtc_state] [CRTC:28] [ 10.693529] [drm:check_shared_dpll_state] PCH DPLL A [ 10.693534] [drm:check_shared_dpll_state] PCH DPLL B [ 10.693567] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 10.693571] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 10.693579] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 10.693583] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 10.693588] [drm:intel_crtc_set_config] [CRTC:28] [NOFB] [ 10.693589] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0 [ 10.693592] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 10.693594] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 10.693599] [drm:drm_fb_helper_hotplug_event] [ 10.693601] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:LVDS-1] [ 10.693603] [drm:intel_lvds_detect] [CONNECTOR:30:LVDS-1] [ 10.693619] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:LVDS-1] probed modes : [ 10.693623] [drm:drm_mode_debug_printmodeline] Modeline 33:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 10.693626] [drm:drm_mode_debug_printmodeline] Modeline 34:"1366x768" 40 50930 1366 1402 1450 1610 768 771 776 790 0x40 0x9 [ 10.693627] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:VGA-1] [ 10.693629] [drm:intel_crt_detect] [CONNECTOR:38:VGA-1] force=1 [ 10.693632] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 10.693633] [drm:intel_crt_detect] CRT not detected via hotplug [ 10.693881] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 10.693893] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 10.694140] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 10.694143] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 10.694144] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 10.694146] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 10.694523] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 10.694524] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 10.694525] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 10.694528] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:VGA-1] disconnected [ 10.694531] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1] [ 10.694532] [drm:intel_hdmi_detect] [CONNECTOR:41:HDMI-A-1] [ 10.694758] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 10.694759] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 10.695002] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 10.695014] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 10.695017] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1] disconnected [ 10.695020] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:46:DP-1] [ 10.695021] [drm:intel_dp_detect] [CONNECTOR:46:DP-1] [ 10.695026] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:46:DP-1] disconnected [ 10.695030] [drm:drm_setup_crtcs] [ 10.695033] [drm:drm_enable_connectors] connector 30 enabled? yes [ 10.695034] [drm:drm_enable_connectors] connector 38 enabled? no [ 10.695035] [drm:drm_enable_connectors] connector 41 enabled? no [ 10.695036] [drm:drm_enable_connectors] connector 46 enabled? no [ 10.695039] [drm:intel_fb_initial_config] looking for cmdline mode on connector LVDS-1 [ 10.695040] [drm:intel_fb_initial_config] looking for preferred mode on connector LVDS-1 0 [ 10.695043] [drm:intel_fb_initial_config] connector LVDS-1 on pipe A [CRTC:20]: 1366x768 [ 10.695044] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping [ 10.695046] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping [ 10.695046] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping [ 10.695049] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 20 (0,0) [ 10.695114] [drm:intel_crtc_set_config] [CRTC:20] [FB:49] #connectors=1 (x y) (0 0) [ 10.695119] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 10.695122] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 10.695127] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 10.695129] [drm:connected_sink_compute_bpp] [CONNECTOR:30:LVDS-1] checking for sink bpp constrains [ 10.695131] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 10.695135] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 10.695137] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 10.695139] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 10.695140] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 10.695141] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 10.695143] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2670373, gmch_n: 4194304, link_m: 148354, link_n: 524288, tu: 64 [ 10.695145] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 10.695147] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 10.695148] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 10.695149] [drm:intel_dump_pipe_config] requested mode: [ 10.695152] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 10.695153] [drm:intel_dump_pipe_config] adjusted mode: [ 10.695155] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 10.695158] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9 [ 10.695159] [drm:intel_dump_pipe_config] port clock: 76400 [ 10.695160] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 10.695162] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 10.695163] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 10.695164] [drm:intel_dump_pipe_config] ips: 0 [ 10.695165] [drm:intel_dump_pipe_config] double wide: 0 [ 10.695168] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 10.695170] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 10.695173] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 10.695175] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 10.695178] [drm:intel_crtc_set_config] [CRTC:28] [NOFB] [ 10.695179] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0 [ 10.695182] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 10.695184] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 10.695196] Console: switching to colour frame buffer device 170x48 [ 10.695210] [drm:intel_crtc_set_config] [CRTC:20] [FB:49] #connectors=1 (x y) (0 0) [ 10.695212] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 10.695215] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 10.695217] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 10.695219] [drm:connected_sink_compute_bpp] [CONNECTOR:30:LVDS-1] checking for sink bpp constrains [ 10.695220] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 10.695222] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 10.695223] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 10.695225] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 10.695226] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 10.695227] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 10.695229] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2670373, gmch_n: 4194304, link_m: 148354, link_n: 524288, tu: 64 [ 10.695231] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 10.695232] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 10.695233] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 10.695234] [drm:intel_dump_pipe_config] requested mode: [ 10.695237] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 10.695238] [drm:intel_dump_pipe_config] adjusted mode: [ 10.695240] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 10.695243] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9 [ 10.695244] [drm:intel_dump_pipe_config] port clock: 76400 [ 10.695245] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 10.695246] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 10.695247] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 10.695248] [drm:intel_dump_pipe_config] ips: 0 [ 10.695249] [drm:intel_dump_pipe_config] double wide: 0 [ 10.699913] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 10.699916] i915 0000:00:02.0: registered panic notifier [ 10.700000] radeon 0000:01:00.0: enabling device (0000 -> 0003) [ 10.759493] thermal LNXTHERM:01: registered as thermal_zone1 [ 10.759500] ACPI: Thermal Zone [GFXZ] (0 C) [ 10.992888] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on RC6p on RC6pp off [ 10.996353] [drm:gen6_enable_rps] Overclocking supported. Max: 1100MHz, Overclock max: 1100MHz [ 11.173472] jmb38x_ms 0000:03:00.3: enabling device (0000 -> 0002) [ 11.180027] thermal LNXTHERM:02: registered as thermal_zone2 [ 11.180033] ACPI: Thermal Zone [EXTZ] (38 C) [ 11.335332] thermal LNXTHERM:03: registered as thermal_zone3 [ 11.335338] ACPI: Thermal Zone [LOCZ] (46 C) [ 11.351403] thermal LNXTHERM:04: registered as thermal_zone4 [ 11.351409] ACPI: Thermal Zone [BATZ] (25 C) [ 11.351949] thermal LNXTHERM:05: registered as thermal_zone5 [ 11.351955] ACPI: Thermal Zone [PCHZ] (0 C) [ 11.353034] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input11 [ 11.353578] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 11.353913] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12 [ 11.353975] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0 [ 11.354082] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 11.354191] [drm] initializing kernel modesetting (TURKS 0x1002:0x6841 0x103C:0x17F4). [ 11.354212] [drm] register mmio base: 0xD0900000 [ 11.354214] [drm] register mmio size: 131072 [ 11.354217] vga_switcheroo: enabled [ 11.354352] ATPX version 1, functions 0x00000003 [ 11.378754] cfg80211: Calling CRDA to update world regulatory domain [ 11.442471] ATOM BIOS: HP/Wistron [ 11.442532] [drm] GPU not posted. posting now... [ 11.445541] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) [ 11.445544] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF [ 11.445545] [drm] Detected VRAM RAM=2048M, BAR=256M [ 11.445546] [drm] RAM width 128bits DDR [ 11.445589] [TTM] Zone kernel: Available graphics memory: 2996740 kiB [ 11.445590] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 11.445591] [TTM] Initializing pool allocator [ 11.445595] [TTM] Initializing DMA pool allocator [ 11.445611] [drm] radeon: 2048M of VRAM memory ready [ 11.445612] [drm] radeon: 1024M of GTT memory ready. [ 11.445621] [drm] Loading TURKS Microcode [ 11.580219] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD87B2/4: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 11.580222] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.580224] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 11.580225] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 11.580226] snd_hda_codec_idt hdaudioC0D0: inputs: [ 11.580228] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11 [ 11.580230] snd_hda_codec_idt hdaudioC0D0: Mic=0xc [ 11.599628] input: PC Speaker as /devices/platform/pcspkr/input/input14 [ 11.615117] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 11.615127] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 11.615650] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c96000, b4:b5:2f:79:18:1a, XID 0c900880 IRQ 33 [ 11.615652] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 11.645829] mousedev: PS/2 mouse device common for all mice [ 11.660804] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 11.661226] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 11.661272] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 11.661314] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 11.726889] rt2800pci 0000:04:00.0: enabling device (0000 -> 0002) [ 11.726983] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected [ 11.730703] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected [ 11.771285] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.788626] ppdev: user-space parallel port driver [ 11.845412] iTCO_vendor_support: vendor-support=0 [ 11.935795] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 11.935839] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 11.935951] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 11.984153] AVX version of gcm_enc/dec engaged. [ 11.984157] AES CTR mode by8 optimization enabled [ 11.988302] input: HP WMI hotkeys as /devices/virtual/input/input22 [ 12.020925] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 12.021816] systemd[1]: Starting Load/Save RF Kill Switch Status... [ 12.393172] [drm] Internal thermal controller with fan control [ 12.393253] == power state 0 == [ 12.393257] ui class: none [ 12.393259] internal class: boot [ 12.393262] caps: [ 12.393264] uvd vclk: 0 dclk: 0 [ 12.393268] power level 0 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 12.393271] power level 1 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 12.393273] power level 2 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 12.393275] status: c r b [ 12.393279] == power state 1 == [ 12.393280] ui class: performance [ 12.393283] internal class: none [ 12.393285] caps: [ 12.393287] uvd vclk: 0 dclk: 0 [ 12.393290] power level 0 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 12.393293] power level 1 sclk: 40000 mclk: 90000 vddc: 1000 vddci: 0 [ 12.393295] power level 2 sclk: 50000 mclk: 90000 vddc: 1000 vddci: 0 [ 12.393297] status: [ 12.393299] == power state 2 == [ 12.393301] ui class: none [ 12.393303] internal class: uvd [ 12.393305] caps: video [ 12.393308] uvd vclk: 70000 dclk: 56000 [ 12.393310] power level 0 sclk: 50000 mclk: 90000 vddc: 1000 vddci: 0 [ 12.393312] power level 1 sclk: 50000 mclk: 90000 vddc: 1000 vddci: 0 [ 12.393314] power level 2 sclk: 50000 mclk: 90000 vddc: 1000 vddci: 0 [ 12.393316] status: [ 12.393318] == power state 3 == [ 12.393319] ui class: battery [ 12.393320] internal class: none [ 12.393322] caps: [ 12.393324] uvd vclk: 0 dclk: 0 [ 12.393326] power level 0 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 12.393328] power level 1 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 12.393330] power level 2 sclk: 40000 mclk: 40000 vddc: 900 vddci: 0 [ 12.393332] status: [ 12.393334] == power state 4 == [ 12.393335] ui class: battery [ 12.393337] internal class: uvd_hd [ 12.393339] caps: video [ 12.393342] uvd vclk: 40000 dclk: 30000 [ 12.393345] power level 0 sclk: 40000 mclk: 40000 vddc: 900 vddci: 0 [ 12.393347] power level 1 sclk: 40000 mclk: 40000 vddc: 900 vddci: 0 [ 12.393349] power level 2 sclk: 40000 mclk: 40000 vddc: 900 vddci: 0 [ 12.393351] status: [ 12.393353] == power state 5 == [ 12.393354] ui class: none [ 12.393356] internal class: ulv [ 12.393358] caps: [ 12.393360] uvd vclk: 0 dclk: 0 [ 12.393362] power level 0 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 12.393365] power level 1 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 12.393367] power level 2 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 12.393368] status: [ 12.396035] [drm] radeon: dpm initialized [ 12.401384] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 12.402128] [drm] PCIE gen 2 link speeds already enabled [ 12.404422] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 12.404533] radeon 0000:01:00.0: WB enabled [ 12.404537] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8800a5e70c00 [ 12.404539] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8800a5e70c0c [ 12.405092] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90003032118 [ 12.405094] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 12.405095] [drm] Driver supports precise vblank timestamp query. [ 12.405097] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 12.405134] radeon 0000:01:00.0: radeon: using MSI. [ 12.405174] [drm] radeon: irq initialized. [ 12.410618] cfg80211: Calling CRDA to update world regulatory domain [ 12.421790] [drm] ring test on 0 succeeded in 1 usecs [ 12.421799] [drm] ring test on 3 succeeded in 4 usecs [ 12.438805] r8169 0000:05:00.0 enp5s0: renamed from eth0 [ 12.463047] media: Linux media interface: v0.10 [ 12.488569] systemd[1]: Created slice system-systemd\x2dbacklight.slice. [ 12.489330] systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:intel_backlight... [ 12.490409] psmouse serio4: synaptics: queried max coordinates: x [..5756], y [..4876] [ 12.513080] Non-volatile memory driver v1.3 [ 12.530584] psmouse serio4: synaptics: queried min coordinates: x [1212..], y [996..] [ 12.555210] Linux video capture interface: v2.00 [ 12.599342] [drm] ring test on 5 succeeded in 2 usecs [ 12.599349] [drm] UVD initialized successfully. [ 12.599579] [drm] ib test on ring 0 succeeded in 0 usecs [ 12.599636] [drm] ib test on ring 3 succeeded in 0 usecs [ 12.603983] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00473/0x640000/0xa2400, board id: 1397, fw id: 958907 [ 12.606493] systemd[1]: Found device Hitachi_HTS547575A9E384 1. [ 12.607303] systemd[1]: Starting File System Check on /dev/disk/by-uuid/03FE-EB28... [ 12.649275] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input21 [ 12.730830] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=2087/3487 [ 12.730834] [drm:intel_panel_actually_set_backlight] set backlight PWM = 2169 [ 12.731473] systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:intel_backlight. [ 12.762878] intel_rapl: Found RAPL domain package [ 12.762882] intel_rapl: Found RAPL domain core [ 12.762884] intel_rapl: Found RAPL domain uncore [ 12.784770] cfg80211: World regulatory domain updated: [ 12.784774] cfg80211: DFS Master region: unset [ 12.784776] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 12.784779] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 12.784781] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 12.784783] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 12.784785] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 12.784788] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 12.784790] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 12.784792] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 12.784794] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 12.784817] cfg80211: Calling CRDA for country: UA [ 12.895037] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b372) [ 12.925793] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input23 [ 12.925948] usbcore: registered new interface driver uvcvideo [ 12.925952] USB Video Class driver (1.1.1) [ 13.006450] systemd[1]: Reached target Sound Card. [ 13.141688] cfg80211: Regulatory domain changed to country: UA [ 13.141693] cfg80211: DFS Master region: ETSI [ 13.141695] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 13.141698] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 13.141700] cfg80211: (5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 13.141702] cfg80211: (5490000 KHz - 5670000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) [ 13.141703] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 13.141705] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 13.169217] rt2800pci 0000:04:00.0 wlo1: renamed from wlan0 [ 13.201271] systemd[1]: Found device RT3290 Wireless 802.11n 1T/1R PCIe (Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo Adapter). [ 13.265202] [drm] ib test on ring 5 succeeded [ 13.267942] [drm] Radeon Display Connectors [ 13.267944] [drm] Connector 0: [ 13.267945] [drm] VGA-2 [ 13.267947] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [ 13.267947] [drm] Encoders: [ 13.267948] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 13.285352] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000 [ 13.285469] switching from power state: [ 13.285470] ui class: none [ 13.285471] internal class: boot [ 13.285472] caps: [ 13.285473] uvd vclk: 0 dclk: 0 [ 13.285475] power level 0 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 13.285476] power level 1 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 13.285477] power level 2 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 13.285477] status: c b [ 13.285479] switching to power state: [ 13.285479] ui class: performance [ 13.285480] internal class: none [ 13.285481] caps: [ 13.285482] uvd vclk: 0 dclk: 0 [ 13.285482] power level 0 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 13.285483] power level 1 sclk: 40000 mclk: 90000 vddc: 1000 vddci: 0 [ 13.285484] power level 2 sclk: 50000 mclk: 90000 vddc: 1000 vddci: 0 [ 13.285485] status: r [ 13.286704] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:VGA-2] [ 13.348174] systemd[1]: Started Load/Save RF Kill Switch Status. [ 13.465670] [drm:radeon_atom_dac_detect] Bios 0 scratch 0 00000001 [ 13.465675] [drm:radeon_atombios_connected_scratch_regs] CRT1 disconnected [ 13.465677] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:VGA-2] status updated from 3 to 2 [ 13.465678] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:VGA-2] disconnected [ 13.465682] radeon 0000:01:00.0: No connectors reported connected with modes [ 13.465683] [drm:drm_setup_crtcs] [ 13.465684] [drm:drm_enable_connectors] connector 40 enabled? no [ 13.465686] [drm:drm_setup_crtcs] picking CRTCs for 16384x16384 config [ 13.465687] [drm] Cannot find any crtc or sizes - going 1024x768 [ 13.466247] [drm] fb mappable at 0xB0475000 [ 13.466247] [drm] vram apper at 0xB0000000 [ 13.466248] [drm] size 3145728 [ 13.466249] [drm] fb depth is 24 [ 13.466249] [drm] pitch is 4096 [ 13.466374] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device [ 13.466523] [drm:radeon_acpi_init] Call to ATCS verify_interface failed: -5 [ 13.466525] [drm:radeon_acpi_init] Call to ATIF verify_interface failed: -5 [ 13.466530] [drm] Initialized radeon 2.42.0 20080528 for 0000:01:00.0 on minor 1 [ 13.664866] switching from power state: [ 13.664870] ui class: performance [ 13.664871] internal class: none [ 13.664872] caps: [ 13.664874] uvd vclk: 0 dclk: 0 [ 13.664875] power level 0 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 13.664876] power level 1 sclk: 40000 mclk: 90000 vddc: 1000 vddci: 0 [ 13.664877] power level 2 sclk: 50000 mclk: 90000 vddc: 1000 vddci: 0 [ 13.664878] status: c [ 13.664879] switching to power state: [ 13.664879] ui class: battery [ 13.664880] internal class: none [ 13.664881] caps: [ 13.664882] uvd vclk: 0 dclk: 0 [ 13.664883] power level 0 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 13.664884] power level 1 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 13.664885] power level 2 sclk: 40000 mclk: 40000 vddc: 900 vddci: 0 [ 13.664885] status: r [ 14.067262] systemd[1]: Found device Hitachi_HTS547575A9E384 3. [ 14.067894] systemd[1]: Starting File System Check on /dev/disk/by-uuid/4b57c7da-3d08-4f62-aef6-72f6085899f7... [ 15.947938] systemd[1]: Started File System Check on /dev/disk/by-uuid/03FE-EB28. [ 16.079936] systemd[1]: Mounting /boot... [ 16.080176] systemd[1]: Started Journal Service. [ 16.292733] systemd-journald[156]: Received request to flush runtime journal from PID 1 [ 17.449265] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered [ 18.599993] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin' [ 18.616509] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37 [ 18.741729] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 19.913199] wlo1: authenticate with 20:cf:30:89:1f:20 [ 19.952936] wlo1: send auth to 20:cf:30:89:1f:20 (try 1/3) [ 19.954693] wlo1: authenticated [ 19.954850] rt2800pci 0000:04:00.0 wlo1: disabling HT as WMM/QoS is not supported by the AP [ 19.954853] rt2800pci 0000:04:00.0 wlo1: disabling VHT as WMM/QoS is not supported by the AP [ 19.962831] wlo1: associate with 20:cf:30:89:1f:20 (try 1/3) [ 19.965246] wlo1: RX AssocResp from 20:cf:30:89:1f:20 (capab=0x411 status=0 aid=1) [ 19.965357] wlo1: associated [ 19.965395] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 23.256409] [drm:intel_crtc_set_config] [CRTC:20] [FB:49] #connectors=1 (x y) (0 0) [ 23.256413] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 23.256417] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 23.256420] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 23.256422] [drm:connected_sink_compute_bpp] [CONNECTOR:30:LVDS-1] checking for sink bpp constrains [ 23.256423] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 23.256426] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 23.256427] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 23.256427] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 23.256428] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 23.256428] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 23.256429] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2670373, gmch_n: 4194304, link_m: 148354, link_n: 524288, tu: 64 [ 23.256430] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 23.256431] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 23.256431] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 23.256432] [drm:intel_dump_pipe_config] requested mode: [ 23.256433] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 23.256434] [drm:intel_dump_pipe_config] adjusted mode: [ 23.256435] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 23.256436] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9 [ 23.256436] [drm:intel_dump_pipe_config] port clock: 76400 [ 23.256437] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 23.256438] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 23.256438] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 23.256439] [drm:intel_dump_pipe_config] ips: 0 [ 23.256439] [drm:intel_dump_pipe_config] double wide: 0 [ 33.950427] [drm:i915_gem_open] [ 33.950445] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[4] [ 33.950490] [drm:intel_crtc_set_config] [CRTC:20] [FB:49] #connectors=1 (x y) (0 0) [ 33.950494] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 33.950497] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 33.950500] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 33.950502] [drm:connected_sink_compute_bpp] [CONNECTOR:30:LVDS-1] checking for sink bpp constrains [ 33.950503] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 33.950506] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 33.950507] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 33.950509] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 33.950510] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 33.950510] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 33.950512] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2670373, gmch_n: 4194304, link_m: 148354, link_n: 524288, tu: 64 [ 33.950513] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 33.950514] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 33.950515] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 33.950516] [drm:intel_dump_pipe_config] requested mode: [ 33.950518] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 33.950519] [drm:intel_dump_pipe_config] adjusted mode: [ 33.950520] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 33.950522] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9 [ 33.950523] [drm:intel_dump_pipe_config] port clock: 76400 [ 33.950524] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 33.950525] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 33.950526] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 33.950526] [drm:intel_dump_pipe_config] ips: 0 [ 33.950527] [drm:intel_dump_pipe_config] double wide: 0 [ 33.950529] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 33.950530] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 33.950532] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 33.950534] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 33.950535] [drm:intel_crtc_set_config] [CRTC:28] [NOFB] [ 33.950536] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0 [ 33.950538] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 33.950539] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 34.394056] [drm] PCIE gen 2 link speeds already enabled [ 34.396599] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 34.396678] radeon 0000:01:00.0: WB enabled [ 34.396681] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8800a5e70c00 [ 34.396682] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8800a5e70c0c [ 34.397235] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90003032118 [ 34.397392] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) [ 34.397395] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) [ 34.397397] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) [ 34.397398] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) [ 34.397399] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) [ 34.397400] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) [ 34.413530] [drm] ring test on 0 succeeded in 1 usecs [ 34.413537] [drm] ring test on 3 succeeded in 3 usecs [ 34.601073] [drm] ring test on 5 succeeded in 2 usecs [ 34.601079] [drm] UVD initialized successfully. [ 34.601140] [drm] ib test on ring 0 succeeded in 0 usecs [ 34.601198] [drm] ib test on ring 3 succeeded in 0 usecs [ 35.250277] [drm] ib test on ring 5 succeeded [ 35.250414] switching from power state: [ 35.250416] ui class: none [ 35.250417] internal class: boot [ 35.250418] caps: [ 35.250419] uvd vclk: 0 dclk: 0 [ 35.250421] power level 0 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 35.250422] power level 1 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 35.250422] power level 2 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 35.250423] status: c b [ 35.250424] switching to power state: [ 35.250425] ui class: battery [ 35.250426] internal class: none [ 35.250427] caps: [ 35.250427] uvd vclk: 0 dclk: 0 [ 35.250428] power level 0 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 35.250429] power level 1 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 35.250430] power level 2 sclk: 40000 mclk: 40000 vddc: 900 vddci: 0 [ 35.250430] status: r [ 35.270644] [drm:drm_mode_getresources] CRTC[6] CONNECTORS[1] ENCODERS[1] [ 36.026477] [drm:i915_gem_open] [ 36.672781] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[4] [ 36.748870] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[4] [ 36.748889] [drm:drm_mode_addfb2] [FB:48] [ 36.749076] [drm:internal_framebuffer_create] could not create framebuffer [ 36.749079] [drm:internal_framebuffer_create] could not create framebuffer [ 36.749113] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[4] [ 36.749116] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[4] ENCODERS[4] [ 36.749206] [drm:drm_mode_getconnector] [CONNECTOR:30:?] [ 36.749214] [drm:drm_mode_getconnector] [CONNECTOR:30:?] [ 36.749586] [drm:drm_mode_getconnector] [CONNECTOR:38:?] [ 36.749597] [drm:drm_mode_getconnector] [CONNECTOR:38:?] [ 36.749627] [drm:drm_mode_getconnector] [CONNECTOR:41:?] [ 36.749630] [drm:drm_mode_getconnector] [CONNECTOR:41:?] [ 36.749663] [drm:drm_mode_getconnector] [CONNECTOR:46:?] [ 36.749666] [drm:drm_mode_getconnector] [CONNECTOR:46:?] [ 37.935672] [drm:radeon_info_ioctl] BACKEND_ENABLED_MASK is si+ only! [ 37.937107] [drm:radeon_info_ioctl] tile mode array is si+ only! [ 37.937111] [drm:radeon_info_ioctl] macrotile mode array is cik+ only! [ 38.185729] [drm:drm_mode_getresources] CRTC[6] CONNECTORS[1] ENCODERS[1] [ 38.185733] [drm:drm_mode_getresources] CRTC[6] CONNECTORS[1] ENCODERS[1] [ 38.185737] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 38.185740] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:VGA-2] [ 38.364208] [drm:radeon_atom_dac_detect] Bios 0 scratch 0 00000001 [ 38.364215] [drm:radeon_atombios_connected_scratch_regs] CRT1 disconnected [ 38.364217] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:VGA-2] disconnected [ 38.364230] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 38.364377] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 38.364379] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:VGA-2] [ 38.544420] [drm:radeon_atom_dac_detect] Bios 0 scratch 0 00000001 [ 38.544428] [drm:radeon_atombios_connected_scratch_regs] CRT1 disconnected [ 38.544430] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:VGA-2] disconnected [ 38.544445] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 38.793298] [drm:drm_mode_addfb2] [FB:48] [ 39.396167] [drm:drm_mode_addfb2] [FB:50] [ 39.396207] [drm:drm_mode_setcrtc] [CRTC:20] [ 39.396211] [drm:drm_mode_setcrtc] [CONNECTOR:30:LVDS-1] [ 39.396213] [drm:intel_crtc_set_config] [CRTC:20] [FB:48] #connectors=1 (x y) (0 0) [ 39.396217] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=1 [ 39.396221] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 39.396224] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 39.396226] [drm:connected_sink_compute_bpp] [CONNECTOR:30:LVDS-1] checking for sink bpp constrains [ 39.396228] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 39.396230] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 39.396232] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 39.396233] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 39.396234] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 39.396235] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 39.396236] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2670373, gmch_n: 4194304, link_m: 148354, link_n: 524288, tu: 64 [ 39.396237] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 39.396239] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 39.396240] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 39.396240] [drm:intel_dump_pipe_config] requested mode: [ 39.396242] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x0 0x9 [ 39.396243] [drm:intel_dump_pipe_config] adjusted mode: [ 39.396245] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 39.396246] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9 [ 39.396247] [drm:intel_dump_pipe_config] port clock: 76400 [ 39.396248] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 39.396249] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 39.396250] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 39.396251] [drm:intel_dump_pipe_config] ips: 0 [ 39.396252] [drm:intel_dump_pipe_config] double wide: 0 [ 39.413103] [drm:drm_mode_setcrtc] [CRTC:28] [ 39.413108] [drm:drm_crtc_helper_set_config] [ 39.413110] [drm:drm_crtc_helper_set_config] [CRTC:28] [NOFB] [ 39.413114] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000 [ 39.413705] [drm:drm_mode_getconnector] [CONNECTOR:46:?] [ 39.413708] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:46:DP-1] [ 39.413709] [drm:intel_dp_detect] [CONNECTOR:46:DP-1] [ 39.413714] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:46:DP-1] disconnected [ 39.413717] [drm:drm_mode_getconnector] [CONNECTOR:41:?] [ 39.413719] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1] [ 39.413720] [drm:intel_hdmi_detect] [CONNECTOR:41:HDMI-A-1] [ 39.413918] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 39.413920] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 39.414114] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 39.414118] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 39.414121] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1] disconnected [ 39.414128] [drm:drm_mode_getconnector] [CONNECTOR:38:?] [ 39.414130] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:VGA-1] [ 39.414133] [drm:intel_crt_detect] [CONNECTOR:38:VGA-1] force=1 [ 39.414138] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 39.414149] [drm:intel_crt_detect] CRT not detected via hotplug [ 39.414404] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 39.414405] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 39.414598] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 39.414601] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 39.414603] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 39.414606] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 39.415000] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 39.415002] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 39.415003] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 39.415004] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:VGA-1] disconnected [ 41.582741] [drm:drm_mode_addfb2] [FB:52] [ 47.142830] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 47.387272] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 20 [ 47.387280] [drm:intel_disable_shared_dpll] disabling PCH DPLL A [ 47.387695] [drm:intel_display_power_put] disabling always-on [ 47.387705] [drm:check_encoder_state] [ENCODER:31:LVDS-31] [ 47.387708] [drm:check_encoder_state] [ENCODER:39:DAC-39] [ 47.387711] [drm:check_encoder_state] [ENCODER:40:TMDS-40] [ 47.387713] [drm:check_encoder_state] [ENCODER:45:TMDS-45] [ 47.387716] [drm:check_crtc_state] [CRTC:20] [ 47.387719] [drm:check_crtc_state] [CRTC:24] [ 47.387720] [drm:check_crtc_state] [CRTC:28] [ 47.387721] [drm:check_shared_dpll_state] PCH DPLL A [ 47.387726] [drm:check_shared_dpll_state] PCH DPLL B [ 47.387773] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/3487 [ 48.813795] [drm:drm_mode_setcrtc] [CRTC:20] [ 48.813803] [drm:drm_mode_setcrtc] [CONNECTOR:30:LVDS-1] [ 48.813806] [drm:intel_crtc_set_config] [CRTC:20] [FB:52] #connectors=1 (x y) (0 0) [ 48.813809] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=1, fb_changed=0 [ 48.813814] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 48.813818] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 48.813820] [drm:connected_sink_compute_bpp] [CONNECTOR:30:LVDS-1] checking for sink bpp constrains [ 48.813821] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 48.813824] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 48.813825] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 48.813827] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 48.813828] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 48.813828] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 48.813830] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2670373, gmch_n: 4194304, link_m: 148354, link_n: 524288, tu: 64 [ 48.813831] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 48.813832] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 48.813833] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 48.813834] [drm:intel_dump_pipe_config] requested mode: [ 48.813836] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x0 0x9 [ 48.813837] [drm:intel_dump_pipe_config] adjusted mode: [ 48.813839] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 48.813841] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9 [ 48.813842] [drm:intel_dump_pipe_config] port clock: 76400 [ 48.813843] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 48.813844] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 48.813845] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 48.813846] [drm:intel_dump_pipe_config] ips: 0 [ 48.813846] [drm:intel_dump_pipe_config] double wide: 0 [ 48.813849] [drm:ironlake_get_refclk] using SSC reference clock of 120000 kHz [ 48.813859] [drm:intel_get_shared_dpll] CRTC:20 allocated PCH DPLL A [ 48.813860] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A [ 48.813866] [drm:intel_display_power_get] enabling always-on [ 48.813871] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A [ 48.814581] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR before link train 0x10 [ 48.814590] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x110 [ 48.814592] [drm:ivb_manual_fdi_link_train] FDI train 1 done, level 0. [ 48.814600] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x600 [ 48.814602] [drm:ivb_manual_fdi_link_train] FDI train 2 done, level 0. [ 48.814602] [drm:ivb_manual_fdi_link_train] FDI train done. [ 48.814606] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0) for crtc 20 [ 48.814607] [drm:intel_enable_shared_dpll] enabling PCH DPLL A [ 48.818063] [drm:intel_panel_enable_backlight] pipe A [ 48.818081] [drm:intel_panel_actually_set_backlight] set backlight PWM = 3487 [ 48.818600] [drm:intel_connector_check_state] [CONNECTOR:30:LVDS-1] [ 48.818608] [drm:check_encoder_state] [ENCODER:31:LVDS-31] [ 48.818611] [drm:check_encoder_state] [ENCODER:39:DAC-39] [ 48.818613] [drm:check_encoder_state] [ENCODER:40:TMDS-40] [ 48.818615] [drm:check_encoder_state] [ENCODER:45:TMDS-45] [ 48.818618] [drm:check_crtc_state] [CRTC:20] [ 48.818632] [drm:check_crtc_state] [CRTC:24] [ 48.818634] [drm:check_crtc_state] [CRTC:28] [ 48.818635] [drm:check_shared_dpll_state] PCH DPLL A [ 48.818640] [drm:check_shared_dpll_state] PCH DPLL B [ 48.818724] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=2087/3487 [ 48.818727] [drm:intel_panel_actually_set_backlight] set backlight PWM = 2169 [ 52.642702] [drm:drm_mode_addfb2] [FB:52] [ 55.416817] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 55.669497] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 20 [ 55.669504] [drm:intel_disable_shared_dpll] disabling PCH DPLL A [ 55.669920] [drm:intel_display_power_put] disabling always-on [ 55.669929] [drm:check_encoder_state] [ENCODER:31:LVDS-31] [ 55.669932] [drm:check_encoder_state] [ENCODER:39:DAC-39] [ 55.669935] [drm:check_encoder_state] [ENCODER:40:TMDS-40] [ 55.669937] [drm:check_encoder_state] [ENCODER:45:TMDS-45] [ 55.669940] [drm:check_crtc_state] [CRTC:20] [ 55.669944] [drm:check_crtc_state] [CRTC:24] [ 55.669945] [drm:check_crtc_state] [CRTC:28] [ 55.669946] [drm:check_shared_dpll_state] PCH DPLL A [ 55.669951] [drm:check_shared_dpll_state] PCH DPLL B [ 55.669996] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/3487 [ 55.670051] [drm:drm_mode_setcrtc] [CRTC:20] [ 55.670059] [drm:drm_mode_setcrtc] [CONNECTOR:30:LVDS-1] [ 55.670061] [drm:intel_crtc_set_config] [CRTC:20] [FB:48] #connectors=1 (x y) (0 0) [ 55.670065] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=1, fb_changed=0 [ 55.670070] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 55.670075] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 55.670078] [drm:connected_sink_compute_bpp] [CONNECTOR:30:LVDS-1] checking for sink bpp constrains [ 55.670079] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 55.670083] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 55.670085] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 55.670086] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 55.670087] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 55.670088] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 55.670091] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2670373, gmch_n: 4194304, link_m: 148354, link_n: 524288, tu: 64 [ 55.670093] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 55.670094] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 55.670096] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 55.670097] [drm:intel_dump_pipe_config] requested mode: [ 55.670099] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x0 0x9 [ 55.670101] [drm:intel_dump_pipe_config] adjusted mode: [ 55.670104] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 55.670106] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9 [ 55.670107] [drm:intel_dump_pipe_config] port clock: 76400 [ 55.670108] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 55.670110] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 55.670112] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 55.670113] [drm:intel_dump_pipe_config] ips: 0 [ 55.670114] [drm:intel_dump_pipe_config] double wide: 0 [ 55.670118] [drm:ironlake_get_refclk] using SSC reference clock of 120000 kHz [ 55.670131] [drm:intel_get_shared_dpll] CRTC:20 allocated PCH DPLL A [ 55.670133] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A [ 55.670140] [drm:intel_display_power_get] enabling always-on [ 55.670149] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A [ 55.670864] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR before link train 0x10 [ 55.670874] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x110 [ 55.670877] [drm:ivb_manual_fdi_link_train] FDI train 1 done, level 0. [ 55.670884] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x600 [ 55.670886] [drm:ivb_manual_fdi_link_train] FDI train 2 done, level 0. [ 55.670887] [drm:ivb_manual_fdi_link_train] FDI train done. [ 55.670891] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0) for crtc 20 [ 55.670892] [drm:intel_enable_shared_dpll] enabling PCH DPLL A [ 56.086782] [drm:intel_panel_enable_backlight] pipe A [ 56.086799] [drm:intel_panel_actually_set_backlight] set backlight PWM = 3487 [ 56.087318] [drm:intel_connector_check_state] [CONNECTOR:30:LVDS-1] [ 56.087325] [drm:check_encoder_state] [ENCODER:31:LVDS-31] [ 56.087328] [drm:check_encoder_state] [ENCODER:39:DAC-39] [ 56.087331] [drm:check_encoder_state] [ENCODER:40:TMDS-40] [ 56.087333] [drm:check_encoder_state] [ENCODER:45:TMDS-45] [ 56.087336] [drm:check_crtc_state] [CRTC:20] [ 56.087351] [drm:check_crtc_state] [CRTC:24] [ 56.087352] [drm:check_crtc_state] [CRTC:28] [ 56.087354] [drm:check_shared_dpll_state] PCH DPLL A [ 56.087358] [drm:check_shared_dpll_state] PCH DPLL B [ 56.087427] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=2087/3487 [ 56.087429] [drm:intel_panel_actually_set_backlight] set backlight PWM = 2169 [ 56.910841] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 57.163977] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 20 [ 57.163985] [drm:intel_disable_shared_dpll] disabling PCH DPLL A [ 57.164401] [drm:intel_display_power_put] disabling always-on [ 57.164411] [drm:check_encoder_state] [ENCODER:31:LVDS-31] [ 57.164414] [drm:check_encoder_state] [ENCODER:39:DAC-39] [ 57.164417] [drm:check_encoder_state] [ENCODER:40:TMDS-40] [ 57.164420] [drm:check_encoder_state] [ENCODER:45:TMDS-45] [ 57.164423] [drm:check_crtc_state] [CRTC:20] [ 57.164425] [drm:check_crtc_state] [CRTC:24] [ 57.164426] [drm:check_crtc_state] [CRTC:28] [ 57.164428] [drm:check_shared_dpll_state] PCH DPLL A [ 57.164432] [drm:check_shared_dpll_state] PCH DPLL B [ 57.164450] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/3487 [ 68.331841] [drm:drm_mode_setcrtc] [CRTC:20] [ 68.331848] [drm:drm_mode_setcrtc] [CONNECTOR:30:LVDS-1] [ 68.331850] [drm:intel_crtc_set_config] [CRTC:20] [FB:48] #connectors=1 (x y) (0 0) [ 68.331852] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=1, fb_changed=0 [ 68.331856] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 68.331860] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 68.331861] [drm:connected_sink_compute_bpp] [CONNECTOR:30:LVDS-1] checking for sink bpp constrains [ 68.331862] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 68.331865] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 68.331866] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 68.331868] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 68.331869] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 68.331870] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 68.331871] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2670373, gmch_n: 4194304, link_m: 148354, link_n: 524288, tu: 64 [ 68.331872] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 68.331873] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 68.331874] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 68.331875] [drm:intel_dump_pipe_config] requested mode: [ 68.331877] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x0 0x9 [ 68.331878] [drm:intel_dump_pipe_config] adjusted mode: [ 68.331879] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 68.331881] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9 [ 68.331882] [drm:intel_dump_pipe_config] port clock: 76400 [ 68.331883] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 68.331884] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 68.331885] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 68.331885] [drm:intel_dump_pipe_config] ips: 0 [ 68.331886] [drm:intel_dump_pipe_config] double wide: 0 [ 68.331889] [drm:ironlake_get_refclk] using SSC reference clock of 120000 kHz [ 68.331898] [drm:intel_get_shared_dpll] CRTC:20 allocated PCH DPLL A [ 68.331899] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A [ 68.331902] [drm:intel_display_power_get] enabling always-on [ 68.331909] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A [ 68.332618] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR before link train 0x10 [ 68.332627] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x110 [ 68.332629] [drm:ivb_manual_fdi_link_train] FDI train 1 done, level 0. [ 68.332636] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x600 [ 68.332638] [drm:ivb_manual_fdi_link_train] FDI train 2 done, level 0. [ 68.332639] [drm:ivb_manual_fdi_link_train] FDI train done. [ 68.332643] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0) for crtc 20 [ 68.332643] [drm:intel_enable_shared_dpll] enabling PCH DPLL A [ 68.334024] [drm:intel_panel_enable_backlight] pipe A [ 68.334028] [drm:intel_panel_actually_set_backlight] set backlight PWM = 3487 [ 68.334538] [drm:intel_connector_check_state] [CONNECTOR:30:LVDS-1] [ 68.334545] [drm:check_encoder_state] [ENCODER:31:LVDS-31] [ 68.334548] [drm:check_encoder_state] [ENCODER:39:DAC-39] [ 68.334550] [drm:check_encoder_state] [ENCODER:40:TMDS-40] [ 68.334552] [drm:check_encoder_state] [ENCODER:45:TMDS-45] [ 68.334555] [drm:check_crtc_state] [CRTC:20] [ 68.334568] [drm:check_crtc_state] [CRTC:24] [ 68.334569] [drm:check_crtc_state] [CRTC:28] [ 68.334570] [drm:check_shared_dpll_state] PCH DPLL A [ 68.334574] [drm:check_shared_dpll_state] PCH DPLL B [ 68.334637] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=2087/3487 [ 68.334639] [drm:intel_panel_actually_set_backlight] set backlight PWM = 2169 [ 72.806692] [drm:intel_lvds_detect] [CONNECTOR:30:LVDS-1] [ 72.808703] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 72.816694] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 73.164486] wlo1: deauthenticating from 20:cf:30:89:1f:20 by local choice (Reason: 3=DEAUTH_LEAVING) [ 73.196862] cfg80211: Calling CRDA to update world regulatory domain [ 73.198464] cfg80211: World regulatory domain updated: [ 73.198467] cfg80211: DFS Master region: unset [ 73.198469] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 73.198471] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 73.198472] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 73.198473] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 73.198475] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 73.198476] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 73.198477] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 73.198479] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 73.198480] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 73.198489] cfg80211: Calling CRDA for country: UA [ 73.200033] cfg80211: Regulatory domain changed to country: UA [ 73.200037] cfg80211: DFS Master region: ETSI [ 73.200038] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 73.200041] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 73.200043] cfg80211: (5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 73.200045] cfg80211: (5490000 KHz - 5670000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s) [ 73.200047] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 73.200048] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 73.809966] PM: Syncing filesystems ... done. [ 74.417604] PM: Preparing system for mem sleep [ 74.433818] [drm:intel_crtc_set_config] [CRTC:20] [FB:49] #connectors=1 (x y) (0 0) [ 74.433821] [drm:intel_set_config_compute_mode_changes] crtc has no fb, will flip [ 74.433822] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=1 [ 74.433825] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 74.433828] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 74.433830] [drm:connected_sink_compute_bpp] [CONNECTOR:30:LVDS-1] checking for sink bpp constrains [ 74.433830] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 74.433833] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 74.433834] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 74.433835] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 74.433835] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 74.433836] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 74.433837] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2670373, gmch_n: 4194304, link_m: 148354, link_n: 524288, tu: 64 [ 74.433838] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 74.433838] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 74.433839] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 74.433839] [drm:intel_dump_pipe_config] requested mode: [ 74.433841] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 74.433841] [drm:intel_dump_pipe_config] adjusted mode: [ 74.433842] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 74.433843] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9 [ 74.433844] [drm:intel_dump_pipe_config] port clock: 76400 [ 74.433844] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 74.433845] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 74.433846] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 74.433846] [drm:intel_dump_pipe_config] ips: 0 [ 74.433846] [drm:intel_dump_pipe_config] double wide: 0 [ 74.448575] [drm:intel_crtc_set_config] [CRTC:24] [NOFB] [ 74.448579] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0 [ 74.448583] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 74.448585] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 74.448587] [drm:intel_crtc_set_config] [CRTC:28] [NOFB] [ 74.448588] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0 [ 74.448589] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 74.448590] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 74.448598] [drm:intel_crtc_set_config] [CRTC:20] [FB:49] #connectors=1 (x y) (0 0) [ 74.448599] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 74.448600] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 74.448602] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 74.448603] [drm:connected_sink_compute_bpp] [CONNECTOR:30:LVDS-1] checking for sink bpp constrains [ 74.448604] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 74.448607] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 74.448607] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 74.448608] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 74.448609] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 74.448609] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 74.448610] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2670373, gmch_n: 4194304, link_m: 148354, link_n: 524288, tu: 64 [ 74.448611] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 74.448612] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 74.448612] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 74.448612] [drm:intel_dump_pipe_config] requested mode: [ 74.448614] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 74.448614] [drm:intel_dump_pipe_config] adjusted mode: [ 74.448616] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 74.448617] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9 [ 74.448617] [drm:intel_dump_pipe_config] port clock: 76400 [ 74.448618] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 74.448618] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 74.448619] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 74.448619] [drm:intel_dump_pipe_config] ips: 0 [ 74.448620] [drm:intel_dump_pipe_config] double wide: 0 [ 74.448632] [drm:intel_crtc_set_config] [CRTC:20] [FB:49] #connectors=1 (x y) (0 0) [ 74.448632] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 74.448634] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 74.448635] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 74.448636] [drm:connected_sink_compute_bpp] [CONNECTOR:30:LVDS-1] checking for sink bpp constrains [ 74.448636] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 74.448637] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 74.448637] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 74.448638] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 74.448638] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 74.448639] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 74.448640] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2670373, gmch_n: 4194304, link_m: 148354, link_n: 524288, tu: 64 [ 74.448640] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 74.448641] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 74.448642] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 74.448642] [drm:intel_dump_pipe_config] requested mode: [ 74.448643] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 74.448643] [drm:intel_dump_pipe_config] adjusted mode: [ 74.448644] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 74.448645] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9 [ 74.448646] [drm:intel_dump_pipe_config] port clock: 76400 [ 74.448646] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 74.448647] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 74.448647] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 74.448648] [drm:intel_dump_pipe_config] ips: 0 [ 74.448648] [drm:intel_dump_pipe_config] double wide: 0 [ 74.450768] Freezing user space processes ... [ 74.872086] [drm] PCIE gen 2 link speeds already enabled [ 74.874619] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 74.874697] radeon 0000:01:00.0: WB enabled [ 74.874700] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8800a5e70c00 [ 74.874701] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8800a5e70c0c [ 74.875255] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90003032118 [ 74.875437] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) [ 74.875442] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) [ 74.875444] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) [ 74.875445] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) [ 74.875447] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) [ 74.875449] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) [ 74.891556] [drm] ring test on 0 succeeded in 1 usecs [ 74.891561] [drm] ring test on 3 succeeded in 3 usecs [ 75.079098] [drm] ring test on 5 succeeded in 2 usecs [ 75.079103] [drm] UVD initialized successfully. [ 75.079161] [drm] ib test on ring 0 succeeded in 0 usecs [ 75.079219] [drm] ib test on ring 3 succeeded in 0 usecs [ 75.737988] [drm] ib test on ring 5 succeeded [ 75.738167] switching from power state: [ 75.738169] ui class: none [ 75.738171] internal class: boot [ 75.738172] caps: [ 75.738174] uvd vclk: 0 dclk: 0 [ 75.738176] power level 0 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 75.738177] power level 1 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 75.738178] power level 2 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 75.738179] status: c b [ 75.738181] switching to power state: [ 75.738182] ui class: battery [ 75.738183] internal class: none [ 75.738184] caps: [ 75.738185] uvd vclk: 0 dclk: 0 [ 75.738187] power level 0 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 75.738188] power level 1 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 75.738189] power level 2 sclk: 40000 mclk: 40000 vddc: 900 vddci: 0 [ 75.738190] status: r [ 75.762796] (elapsed 1.311 seconds) done. [ 75.762801] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 75.764015] PM: Entering mem sleep [ 75.764031] Suspending console(s) (use no_console_suspend to debug) [ 75.764356] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 75.764467] sd 0:0:0:0: [sda] Stopping disk [ 75.813330] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0 [ 76.057305] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 20 [ 76.057310] [drm:intel_disable_shared_dpll] disabling PCH DPLL A [ 76.058038] [drm:i915_check_and_clear_faults] Unexpected fault Addr: 0x00000000 Address space: PPGTT Source ID: 24 Type: 2 [ 76.059595] [drm:intel_display_power_put] disabling always-on [ 76.358227] PM: suspend of devices complete after 593.726 msecs [ 76.378107] PM: late suspend of devices complete after 19.863 msecs [ 76.378585] r8169 0000:05:00.0: System wakeup enabled by ACPI [ 76.378647] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 76.378763] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI [ 76.378832] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 76.398187] PM: noirq suspend of devices complete after 20.065 msecs [ 76.398371] ACPI: Preparing to enter system sleep state S3 [ 76.498412] ACPI : EC: EC stopped [ 76.498413] PM: Saving platform NVS memory [ 76.498417] Disabling non-boot CPUs ... [ 76.498449] intel_pstate CPU 1 exiting [ 76.499687] kvm: disabling virtualization on CPU1 [ 76.499693] smpboot: CPU 1 is now offline [ 76.499994] intel_pstate CPU 2 exiting [ 76.501231] kvm: disabling virtualization on CPU2 [ 76.501240] smpboot: CPU 2 is now offline [ 76.501545] intel_pstate CPU 3 exiting [ 76.502739] kvm: disabling virtualization on CPU3 [ 76.502742] smpboot: CPU 3 is now offline [ 76.503946] ACPI: Low-level resume complete [ 76.503985] ACPI : EC: EC started [ 76.503985] PM: Restoring platform NVS memory [ 76.504875] microcode: CPU0 microcode updated early to revision 0x1b, date = 2014-05-29 [ 76.504962] Enabling non-boot CPUs ... [ 76.505001] x86: Booting SMP configuration: [ 76.505002] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 76.516459] kvm: enabling virtualization on CPU1 [ 76.518711] cache: parent cpu1 should not be sleeping [ 76.518838] CPU1 is up [ 76.518861] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 76.530240] microcode: CPU2 microcode updated early to revision 0x1b, date = 2014-05-29 [ 76.530665] kvm: enabling virtualization on CPU2 [ 76.532853] cache: parent cpu2 should not be sleeping [ 76.532976] CPU2 is up [ 76.533001] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 76.544462] kvm: enabling virtualization on CPU3 [ 76.546737] cache: parent cpu3 should not be sleeping [ 76.546868] CPU3 is up [ 76.549881] ACPI: Waking up from system sleep state S3 [ 77.932013] acpi LNXPOWER:02: Turning OFF [ 77.932047] acpi LNXPOWER:01: Turning OFF [ 77.951095] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI [ 77.951118] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 77.951288] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 78.211206] PM: noirq resume of devices complete after 278.955 msecs [ 78.211380] [drm:intel_display_power_get] enabling always-on [ 78.211412] PM: early resume of devices complete after 0.181 msecs [ 78.211677] r8169 0000:05:00.0: System wakeup disabled by ACPI [ 78.213468] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it [ 78.213779] [drm:intel_opregion_setup] graphic opregion physical addr: 0xa9fb6018 [ 78.213790] [drm:intel_opregion_setup] Public ACPI methods supported [ 78.213791] [drm:intel_opregion_setup] SWSCI supported [ 78.216905] [drm] PCIE gen 2 link speeds already enabled [ 78.219584] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 78.219666] radeon 0000:01:00.0: WB enabled [ 78.219668] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8800a5e70c00 [ 78.219670] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8800a5e70c0c [ 78.220221] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90003032118 [ 78.220405] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) [ 78.220406] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) [ 78.220407] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) [ 78.220408] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) [ 78.220408] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) [ 78.220409] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2) [ 78.222319] sd 0:0:0:0: [sda] Starting disk [ 78.236538] [drm] ring test on 0 succeeded in 1 usecs [ 78.236543] [drm] ring test on 3 succeeded in 3 usecs [ 78.282163] [drm:swsci] SWSCI request timed out [ 78.282165] [drm:swsci] SWSCI request already in progress [ 78.282166] [drm:swsci_setup] SWSCI GBDA callbacks 00000001, SBCB callbacks 00000001 [ 78.282167] [drm:intel_opregion_setup] ASLE supported [ 78.282170] [drm:ironlake_init_pch_refclk] has_panel 1 has_lvds 1 has_ck505 0 [ 78.282173] [drm:ironlake_init_pch_refclk] Using SSC on panel [ 78.282584] [drm:intel_crt_reset] crt adpa set to 0xf40000 [ 78.284683] [drm:intel_modeset_readout_hw_state] [CRTC:20] hw state readout: disabled [ 78.284684] [drm:intel_modeset_readout_hw_state] [CRTC:24] hw state readout: disabled [ 78.284685] [drm:intel_modeset_readout_hw_state] [CRTC:28] hw state readout: disabled [ 78.284690] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: crtc_mask 0x00000000, on 0 [ 78.284694] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: crtc_mask 0x00000000, on 0 [ 78.284697] [drm:intel_modeset_readout_hw_state] [ENCODER:31:LVDS-31] hw state readout: disabled, pipe A [ 78.284699] [drm:intel_modeset_readout_hw_state] [ENCODER:39:DAC-39] hw state readout: disabled, pipe A [ 78.284702] [drm:intel_modeset_readout_hw_state] [ENCODER:40:TMDS-40] hw state readout: disabled, pipe A [ 78.284705] [drm:intel_modeset_readout_hw_state] [ENCODER:45:TMDS-45] hw state readout: disabled, pipe A [ 78.284708] [drm:intel_modeset_readout_hw_state] [CONNECTOR:30:LVDS-1] hw state readout: disabled [ 78.284709] [drm:intel_modeset_readout_hw_state] [CONNECTOR:38:VGA-1] hw state readout: disabled [ 78.284711] [drm:intel_modeset_readout_hw_state] [CONNECTOR:41:HDMI-A-1] hw state readout: disabled [ 78.284713] [drm:intel_modeset_readout_hw_state] [CONNECTOR:46:DP-1] hw state readout: disabled [ 78.284715] [drm:intel_dump_pipe_config] [CRTC:20][setup_hw_state] config for pipe A [ 78.284716] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 78.284717] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 78.284717] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 78.284718] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 78.284719] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 78.284720] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 78.284720] [drm:intel_dump_pipe_config] requested mode: [ 78.284722] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 78.284722] [drm:intel_dump_pipe_config] adjusted mode: [ 78.284724] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 78.284725] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 78.284725] [drm:intel_dump_pipe_config] port clock: 0 [ 78.284726] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 78.284727] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 78.284727] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 78.284728] [drm:intel_dump_pipe_config] ips: 0 [ 78.284728] [drm:intel_dump_pipe_config] double wide: 0 [ 78.284729] [drm:intel_dump_pipe_config] [CRTC:24][setup_hw_state] config for pipe B [ 78.284730] [drm:intel_dump_pipe_config] cpu_transcoder: B [ 78.284730] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 78.284731] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 78.284732] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 78.284733] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 78.284733] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 78.284734] [drm:intel_dump_pipe_config] requested mode: [ 78.284735] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 78.284735] [drm:intel_dump_pipe_config] adjusted mode: [ 78.284737] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 78.284738] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 78.284738] [drm:intel_dump_pipe_config] port clock: 0 [ 78.284739] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 78.284739] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 78.284740] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 78.284740] [drm:intel_dump_pipe_config] ips: 0 [ 78.284741] [drm:intel_dump_pipe_config] double wide: 0 [ 78.284742] [drm:intel_dump_pipe_config] [CRTC:28][setup_hw_state] config for pipe C [ 78.284742] [drm:intel_dump_pipe_config] cpu_transcoder: C [ 78.284743] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0 [ 78.284744] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 78.284744] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 78.284745] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 78.284746] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 78.284746] [drm:intel_dump_pipe_config] requested mode: [ 78.284747] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 78.284748] [drm:intel_dump_pipe_config] adjusted mode: [ 78.284749] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 78.284750] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 78.284750] [drm:intel_dump_pipe_config] port clock: 0 [ 78.284751] [drm:intel_dump_pipe_config] pipe src size: 0x0 [ 78.284751] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 78.284752] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 78.284752] [drm:intel_dump_pipe_config] ips: 0 [ 78.284753] [drm:intel_dump_pipe_config] double wide: 0 [ 78.284759] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 78.284762] [drm:connected_sink_compute_bpp] [CONNECTOR:30:LVDS-1] checking for sink bpp constrains [ 78.284762] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 78.284765] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 78.284766] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 78.284767] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 78.284767] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 78.284768] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 78.284769] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2670373, gmch_n: 4194304, link_m: 148354, link_n: 524288, tu: 64 [ 78.284770] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 78.284770] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 78.284771] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 78.284771] [drm:intel_dump_pipe_config] requested mode: [ 78.284773] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x0 0x9 [ 78.284773] [drm:intel_dump_pipe_config] adjusted mode: [ 78.284775] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 78.284776] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9 [ 78.284777] [drm:intel_dump_pipe_config] port clock: 76400 [ 78.284777] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 78.284778] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 78.284778] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 78.284779] [drm:intel_dump_pipe_config] ips: 0 [ 78.284779] [drm:intel_dump_pipe_config] double wide: 0 [ 78.284781] [drm:ironlake_get_refclk] using SSC reference clock of 120000 kHz [ 78.284792] [drm:intel_get_shared_dpll] CRTC:20 allocated PCH DPLL A [ 78.284793] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A [ 78.284802] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A [ 78.285514] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR before link train 0x0 [ 78.285522] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x100 [ 78.285523] [drm:ivb_manual_fdi_link_train] FDI train 1 done, level 0. [ 78.285530] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x200 [ 78.285531] [drm:ivb_manual_fdi_link_train] FDI train 2 done, level 0. [ 78.285531] [drm:ivb_manual_fdi_link_train] FDI train done. [ 78.285535] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0) for crtc 20 [ 78.285535] [drm:intel_enable_shared_dpll] enabling PCH DPLL A [ 78.288924] [drm:intel_panel_enable_backlight] pipe A [ 78.288927] [drm:intel_panel_actually_set_backlight] set backlight PWM = 2169 [ 78.289439] [drm:intel_connector_check_state] [CONNECTOR:30:LVDS-1] [ 78.289442] [drm:check_encoder_state] [ENCODER:31:LVDS-31] [ 78.289444] [drm:check_encoder_state] [ENCODER:39:DAC-39] [ 78.289446] [drm:check_encoder_state] [ENCODER:40:TMDS-40] [ 78.289448] [drm:check_encoder_state] [ENCODER:45:TMDS-45] [ 78.289450] [drm:check_crtc_state] [CRTC:20] [ 78.289461] [drm:check_crtc_state] [CRTC:24] [ 78.289461] [drm:check_crtc_state] [CRTC:28] [ 78.289462] [drm:check_shared_dpll_state] PCH DPLL A [ 78.289465] [drm:check_shared_dpll_state] PCH DPLL B [ 78.289472] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 78.289475] [drm:intel_connector_check_state] [CONNECTOR:30:LVDS-1] [ 78.289479] [drm:check_encoder_state] [ENCODER:31:LVDS-31] [ 78.289481] [drm:check_encoder_state] [ENCODER:39:DAC-39] [ 78.289482] [drm:check_encoder_state] [ENCODER:40:TMDS-40] [ 78.289484] [drm:check_encoder_state] [ENCODER:45:TMDS-45] [ 78.289485] [drm:check_crtc_state] [CRTC:20] [ 78.289495] [drm:check_crtc_state] [CRTC:24] [ 78.289495] [drm:check_crtc_state] [CRTC:28] [ 78.289496] [drm:check_shared_dpll_state] PCH DPLL A [ 78.289500] [drm:check_shared_dpll_state] PCH DPLL B [ 78.289504] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0 [ 78.289506] [drm:intel_connector_check_state] [CONNECTOR:30:LVDS-1] [ 78.289509] [drm:check_encoder_state] [ENCODER:31:LVDS-31] [ 78.289511] [drm:check_encoder_state] [ENCODER:39:DAC-39] [ 78.289513] [drm:check_encoder_state] [ENCODER:40:TMDS-40] [ 78.289514] [drm:check_encoder_state] [ENCODER:45:TMDS-45] [ 78.289516] [drm:check_crtc_state] [CRTC:20] [ 78.289525] [drm:check_crtc_state] [CRTC:24] [ 78.289525] [drm:check_crtc_state] [CRTC:28] [ 78.289526] [drm:check_shared_dpll_state] PCH DPLL A [ 78.289530] [drm:check_shared_dpll_state] PCH DPLL B [ 78.289533] [drm:intel_connector_check_state] [CONNECTOR:30:LVDS-1] [ 78.289538] [drm:check_encoder_state] [ENCODER:31:LVDS-31] [ 78.289540] [drm:check_encoder_state] [ENCODER:39:DAC-39] [ 78.289541] [drm:check_encoder_state] [ENCODER:40:TMDS-40] [ 78.289543] [drm:check_encoder_state] [ENCODER:45:TMDS-45] [ 78.289544] [drm:check_crtc_state] [CRTC:20] [ 78.289554] [drm:check_crtc_state] [CRTC:24] [ 78.289554] [drm:check_crtc_state] [CRTC:28] [ 78.289555] [drm:check_shared_dpll_state] PCH DPLL A [ 78.289558] [drm:check_shared_dpll_state] PCH DPLL B [ 78.424089] [drm] ring test on 5 succeeded in 2 usecs [ 78.424093] [drm] UVD initialized successfully. [ 78.424154] [drm] ib test on ring 0 succeeded in 0 usecs [ 78.424212] [drm] ib test on ring 3 succeeded in 0 usecs [ 78.461272] usb 1-1.3: reset high-speed USB device number 3 using ehci-pci [ 78.591401] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 78.592642] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 78.594231] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 78.594235] ata2.00: configured for UDMA/100 [ 78.771546] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 78.773113] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 78.774970] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 78.775147] ata1.00: configured for UDMA/100 [ 79.081895] [drm] ib test on ring 5 succeeded [ 79.082042] switching from power state: [ 79.082043] ui class: none [ 79.082044] internal class: boot [ 79.082045] caps: [ 79.082046] uvd vclk: 0 dclk: 0 [ 79.082047] power level 0 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 79.082047] power level 1 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 79.082048] power level 2 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 79.082048] status: c b [ 79.082049] switching to power state: [ 79.082049] ui class: battery [ 79.082049] internal class: none [ 79.082050] caps: [ 79.082050] uvd vclk: 0 dclk: 0 [ 79.082051] power level 0 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 79.082051] power level 1 sclk: 30000 mclk: 15000 vddc: 900 vddci: 0 [ 79.082052] power level 2 sclk: 40000 mclk: 40000 vddc: 900 vddci: 0 [ 79.082052] status: r [ 79.101989] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000 [ 79.102905] [drm:intel_crtc_set_config] [CRTC:20] [FB:49] #connectors=1 (x y) (0 0) [ 79.102907] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0 [ 79.102910] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 79.102912] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 79.102913] [drm:connected_sink_compute_bpp] [CONNECTOR:30:LVDS-1] checking for sink bpp constrains [ 79.102914] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 79.102916] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 79.102917] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 79.102918] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 79.102918] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 79.102919] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 79.102920] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2670373, gmch_n: 4194304, link_m: 148354, link_n: 524288, tu: 64 [ 79.102921] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 79.102922] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 79.102922] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 79.102923] [drm:intel_dump_pipe_config] requested mode: [ 79.102924] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 79.102925] [drm:intel_dump_pipe_config] adjusted mode: [ 79.102926] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 79.102927] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9 [ 79.102928] [drm:intel_dump_pipe_config] port clock: 76400 [ 79.102929] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 79.102929] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 79.102930] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 79.102931] [drm:intel_dump_pipe_config] ips: 0 [ 79.102931] [drm:intel_dump_pipe_config] double wide: 0 [ 79.338452] [drm:radeon_acpi_event] pm: AC [ 79.338498] [drm:radeon_atif_handler] event, device_class = ac_adapter, type = 0x80 [ 79.652282] [drm:intel_lvds_detect] [CONNECTOR:30:LVDS-1] [ 79.652311] rtc_cmos 00:03: System wakeup disabled by ACPI [ 79.655711] PM: resume of devices complete after 1443.281 msecs [ 79.655957] PM: Finishing wakeup. [ 79.655959] Restarting tasks ... [ 79.656105] acpi PNP0501:00: Still not present [ 79.656240] done. [ 79.661593] pci_bus 0000:02: Allocating resources [ 79.661611] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 79.661617] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 79.661626] pci_bus 0000:03: Allocating resources [ 79.661654] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 79.661658] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 79.661668] pci_bus 0000:04: Allocating resources [ 79.661688] pcieport 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 79.661691] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 79.661700] pci_bus 0000:05: Allocating resources [ 79.661718] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 79.661726] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 79.661729] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 79.661732] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 79.661735] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 79.661738] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 79.661741] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 79.661745] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 79.661748] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 79.661751] pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 79.661754] pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 79.661757] pcieport 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 79.661759] pcieport 0000:00:1c.3: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 79.661772] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xaf200000-0xaf3fffff 64bit pref] [ 79.661779] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xaf400000-0xaf5fffff 64bit pref] [ 79.661785] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xaf600000-0xaf7fffff 64bit pref] [ 79.661790] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff] [ 79.661794] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff] [ 79.661798] pcieport 0000:00:1c.3: BAR 13: assigned [io 0x7000-0x7fff] [ 79.661898] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 79.661991] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 79.932585] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 80.002432] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on RC6p on RC6pp off [ 80.006483] [drm:gen6_enable_rps] Overclocking supported. Max: 1100MHz, Overclock max: 1100MHz [ 80.193604] [drm:drm_mode_setcrtc] [CRTC:20] [ 80.193612] [drm:drm_mode_setcrtc] [CONNECTOR:30:LVDS-1] [ 80.193615] [drm:intel_crtc_set_config] [CRTC:20] [FB:48] #connectors=1 (x y) (0 0) [ 80.193619] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=1 [ 80.193623] [drm:intel_modeset_stage_output_state] [CONNECTOR:30:LVDS-1] to [CRTC:20] [ 80.193628] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 80.193631] [drm:connected_sink_compute_bpp] [CONNECTOR:30:LVDS-1] checking for sink bpp constrains [ 80.193633] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18 [ 80.193637] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1 [ 80.193639] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1 [ 80.193641] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A [ 80.193642] [drm:intel_dump_pipe_config] cpu_transcoder: A [ 80.193644] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1 [ 80.193646] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2670373, gmch_n: 4194304, link_m: 148354, link_n: 524288, tu: 64 [ 80.193648] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 80.193650] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0 [ 80.193652] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0 [ 80.193653] [drm:intel_dump_pipe_config] requested mode: [ 80.193656] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x0 0x9 [ 80.193658] [drm:intel_dump_pipe_config] adjusted mode: [ 80.193661] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9 [ 80.193664] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9 [ 80.193665] [drm:intel_dump_pipe_config] port clock: 76400 [ 80.193667] [drm:intel_dump_pipe_config] pipe src size: 1366x768 [ 80.193669] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 80.193671] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 80.193672] [drm:intel_dump_pipe_config] ips: 0 [ 80.193674] [drm:intel_dump_pipe_config] double wide: 0 [ 80.196939] [drm:drm_mode_getconnector] [CONNECTOR:46:?] [ 80.196944] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:46:DP-1] [ 80.196946] [drm:intel_dp_detect] [CONNECTOR:46:DP-1] [ 80.196952] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:46:DP-1] disconnected [ 80.196958] [drm:drm_mode_getconnector] [CONNECTOR:41:?] [ 80.196960] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1] [ 80.196961] [drm:intel_hdmi_detect] [CONNECTOR:41:HDMI-A-1] [ 80.197217] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 80.197221] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK on first message, retry [ 80.197465] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) [ 80.197469] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd [ 80.197471] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:41:HDMI-A-1] disconnected [ 80.197483] [drm:drm_mode_getconnector] [CONNECTOR:38:?] [ 80.197485] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:VGA-1] [ 80.197487] [drm:intel_crt_detect] [CONNECTOR:38:VGA-1] force=1 [ 80.197491] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000 [ 80.207840] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0 [ 80.207844] [drm:intel_crt_detect] CRT not detected via hotplug [ 80.208082] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 80.208084] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry [ 80.208337] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) [ 80.208342] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 80.208344] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 80.208346] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1 [ 80.208712] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga [ 80.208713] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0 [ 80.208715] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [ 80.208718] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:38:VGA-1] disconnected [ 80.208784] [drm:drm_mode_setcrtc] [CRTC:28] [ 80.208787] [drm:drm_crtc_helper_set_config] [ 80.208788] [drm:drm_crtc_helper_set_config] [CRTC:28] [NOFB] [ 80.208792] [drm:radeon_atom_encoder_dpms] encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000 [ 80.209206] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 80.209208] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:VGA-2] [ 80.383077] [drm:radeon_atom_dac_detect] Bios 0 scratch 0 00000001 [ 80.383085] [drm:radeon_atombios_connected_scratch_regs] CRT1 disconnected [ 80.383089] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:VGA-2] disconnected [ 80.383103] [drm:drm_mode_getconnector] [CONNECTOR:40:?] [ 80.448431] psmouse serio4: synaptics: queried max coordinates: x [..5756], y [..4876] [ 80.487617] psmouse serio4: synaptics: queried min coordinates: x [1212..], y [996..] [ 81.113811] wlo1: authenticate with 20:cf:30:89:1f:20 [ 81.153498] wlo1: send auth to 20:cf:30:89:1f:20 (try 1/3) [ 81.155074] wlo1: authenticated [ 81.155196] rt2800pci 0000:04:00.0 wlo1: disabling HT as WMM/QoS is not supported by the AP [ 81.155200] rt2800pci 0000:04:00.0 wlo1: disabling VHT as WMM/QoS is not supported by the AP [ 81.163375] wlo1: associate with 20:cf:30:89:1f:20 (try 1/3) [ 81.165525] wlo1: RX AssocResp from 20:cf:30:89:1f:20 (capab=0x411 status=0 aid=1) [ 81.165637] wlo1: associated [ 81.165678] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 106.621688] [drm:drm_mode_addfb2] [FB:52]