[ 182.989] X.Org X Server 1.12.3 Release Date: 2012-07-09 [ 182.992] X Protocol Version 11, Revision 0 [ 182.992] Build Operating System: Linux 3.4.4-3-ARCH i686 [ 182.994] Current Operating System: Linux pcolivier 3.4.4-2-ARCH #1 SMP PREEMPT Sun Jul 8 17:54:40 CEST 2012 i686 [ 182.994] Kernel command line: root=UUID=1c993bad-85b5-4edc-a57a-280a801b327b ro noautogroup ipv6.disable=1 video=SVIDEO-1:d initrd=/boot/initramfs-linux.img BOOT_IMAGE=/boot/vmlinuz-linux [ 182.998] Build Date: 09 July 2012 04:03:16PM [ 182.999] [ 183.000] Current version of pixman: 0.26.2 [ 183.002] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 183.002] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 183.014] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 17 09:53:20 2012 [ 183.095] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 183.161] (==) No Layout section. Using the first Screen section. [ 183.161] (==) No screen section available. Using defaults. [ 183.161] (**) |-->Screen "Default Screen Section" (0) [ 183.161] (**) | |-->Monitor "<default monitor>" [ 183.164] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 183.164] (==) Automatically adding devices [ 183.164] (==) Automatically enabling devices [ 183.196] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 183.196] Entry deleted from font path. [ 183.258] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ [ 183.258] (==) ModulePath set to "/usr/lib/xorg/modules" [ 183.258] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 183.258] (II) Loader magic: 0x82235a0 [ 183.258] (II) Module ABI versions: [ 183.258] X.Org ANSI C Emulation: 0.4 [ 183.258] X.Org Video Driver: 12.0 [ 183.258] X.Org XInput driver : 16.0 [ 183.258] X.Org Server Extension : 6.0 [ 183.267] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/16777216 [ 183.270] (II) Open ACPI successful (/var/run/acpid.socket) [ 183.270] (II) LoadModule: "extmod" [ 183.303] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 183.325] (II) Module extmod: vendor="X.Org Foundation" [ 183.325] compiled for 1.12.3, module version = 1.0.0 [ 183.326] Module class: X.Org Server Extension [ 183.326] ABI class: X.Org Server Extension, version 6.0 [ 183.326] (II) Loading extension MIT-SCREEN-SAVER [ 183.326] (II) Loading extension XFree86-VidModeExtension [ 183.326] (II) Loading extension XFree86-DGA [ 183.326] (II) Loading extension DPMS [ 183.326] (II) Loading extension XVideo [ 183.326] (II) Loading extension XVideo-MotionCompensation [ 183.326] (II) Loading extension X-Resource [ 183.326] (II) LoadModule: "dbe" [ 183.328] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 183.331] (II) Module dbe: vendor="X.Org Foundation" [ 183.331] compiled for 1.12.3, module version = 1.0.0 [ 183.331] Module class: X.Org Server Extension [ 183.331] ABI class: X.Org Server Extension, version 6.0 [ 183.331] (II) Loading extension DOUBLE-BUFFER [ 183.331] (II) LoadModule: "glx" [ 183.333] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 183.369] (II) Module glx: vendor="X.Org Foundation" [ 183.369] compiled for 1.12.3, module version = 1.0.0 [ 183.370] ABI class: X.Org Server Extension, version 6.0 [ 183.370] (==) AIGLX enabled [ 183.371] (II) Loading extension GLX [ 183.371] (II) LoadModule: "record" [ 183.372] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 183.384] (II) Module record: vendor="X.Org Foundation" [ 183.385] compiled for 1.12.3, module version = 1.13.0 [ 183.385] Module class: X.Org Server Extension [ 183.385] ABI class: X.Org Server Extension, version 6.0 [ 183.385] (II) Loading extension RECORD [ 183.385] (II) LoadModule: "dri" [ 183.386] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 183.422] (II) Module dri: vendor="X.Org Foundation" [ 183.422] compiled for 1.12.3, module version = 1.0.0 [ 183.422] ABI class: X.Org Server Extension, version 6.0 [ 183.422] (II) Loading extension XFree86-DRI [ 183.422] (II) LoadModule: "dri2" [ 183.424] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 183.427] (II) Module dri2: vendor="X.Org Foundation" [ 183.427] compiled for 1.12.3, module version = 1.2.0 [ 183.427] ABI class: X.Org Server Extension, version 6.0 [ 183.428] (II) Loading extension DRI2 [ 183.428] (==) Matched vboxvideo as autoconfigured driver 0 [ 183.428] (==) Matched vesa as autoconfigured driver 1 [ 183.428] (==) Matched fbdev as autoconfigured driver 2 [ 183.428] (==) Assigned the driver to the xf86ConfigLayout [ 183.428] (II) LoadModule: "vboxvideo" [ 183.476] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo.so [ 183.507] (II) Module vboxvideo: vendor="Oracle Corporation" [ 183.507] compiled for 1.5.99.901, module version = 1.0.1 [ 183.507] Module class: X.Org Video Driver [ 183.507] ABI class: X.Org Video Driver, version 12.0 [ 183.507] (**) Load address of symbol "VBOXVIDEO" is 0xb71ad2e0 [ 183.507] (II) LoadModule: "vesa" [ 183.509] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 183.547] (II) Module vesa: vendor="X.Org Foundation" [ 183.547] compiled for 1.12.0, module version = 2.3.1 [ 183.547] Module class: X.Org Video Driver [ 183.547] ABI class: X.Org Video Driver, version 12.0 [ 183.547] (II) LoadModule: "fbdev" [ 183.551] (WW) Warning, couldn't open module fbdev [ 183.551] (II) UnloadModule: "fbdev" [ 183.551] (II) Unloading fbdev [ 183.551] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 183.551] (II) VBoxVideo: guest driver for VirtualBox: vbox [ 183.551] (II) VESA: driver for VESA chipsets: vesa [ 183.551] (--) using VT number 7 [ 183.608] (WW) Falling back to old probe method for vesa [ 183.621] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.1.18_OSE [ 183.621] (II) Loading sub module "ramdac" [ 183.621] (II) LoadModule: "ramdac" [ 183.621] (II) Module "ramdac" already built-in [ 183.621] (II) Loading sub module "fb" [ 183.621] (II) LoadModule: "fb" [ 183.622] (II) Loading /usr/lib/xorg/modules/libfb.so [ 183.680] (II) Module fb: vendor="X.Org Foundation" [ 183.680] compiled for 1.12.3, module version = 1.0.0 [ 183.680] ABI class: X.Org ANSI C Emulation, version 0.4 [ 183.680] (II) Loading sub module "shadowfb" [ 183.680] (II) LoadModule: "shadowfb" [ 183.682] (II) Loading /usr/lib/xorg/modules/libshadowfb.so [ 183.729] (II) Module shadowfb: vendor="X.Org Foundation" [ 183.729] compiled for 1.12.3, module version = 1.0.0 [ 183.729] ABI class: X.Org ANSI C Emulation, version 0.4 [ 183.729] (II) Loading sub module "vgahw" [ 183.729] (II) LoadModule: "vgahw" [ 183.730] (II) Loading /usr/lib/xorg/modules/libvgahw.so [ 183.733] (II) Module vgahw: vendor="X.Org Foundation" [ 183.733] compiled for 1.12.3, module version = 0.1.0 [ 183.733] ABI class: X.Org Video Driver, version 12.0 [ 183.733] (II) Loading sub module "dri" [ 183.733] (II) LoadModule: "dri" [ 183.734] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 183.734] (II) Module dri: vendor="X.Org Foundation" [ 183.734] compiled for 1.12.3, module version = 1.0.0 [ 183.734] ABI class: X.Org Server Extension, version 6.0 [ 183.738] (II) VBoxVideo(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 183.738] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32 [ 183.738] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000) [ 183.739] (**) VBoxVideo(0): Built-in mode "VBoxInitialMode": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz [ 183.739] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b) [ 183.739] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz [ 183.739] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b) [ 183.739] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz [ 183.739] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b) [ 183.739] (**) VBoxVideo(0): Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz [ 183.739] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b) [ 183.739] (**) VBoxVideo(0): Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz [ 183.739] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b) [ 183.740] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0 [ 183.740] (==) VBoxVideo(0): RGB weight 888 [ 183.740] (==) VBoxVideo(0): Default visual is TrueColor [ 183.740] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0) [ 183.740] (==) VBoxVideo(0): DPI set to (96, 96) [ 183.740] (II) UnloadModule: "vesa" [ 183.740] (II) Unloading vesa [ 183.740] (--) Depth 24 pixmap format is 32 bpp [ 184.334] drmOpenDevice: node name is /dev/dri/card0 [ 184.334] drmOpenDevice: open result is 10, (OK) [ 184.335] drmOpenDevice: node name is /dev/dri/card0 [ 184.335] drmOpenDevice: open result is 10, (OK) [ 184.335] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 184.335] drmOpenDevice: node name is /dev/dri/card0 [ 184.335] drmOpenDevice: open result is 10, (OK) [ 184.335] drmOpenByBusid: drmOpenMinor returns 10 [ 184.335] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 184.335] (II) [drm] DRM interface version 1.4 [ 184.335] (II) [drm] DRM open master succeeded. [ 184.336] (II) VBoxVideo(0): [drm] Using the DRM lock SAREA also for drawables. [ 184.336] (II) VBoxVideo(0): [drm] framebuffer handle = 0xe0000000 [ 184.336] (II) VBoxVideo(0): [drm] added 1 reserved context for kernel [ 184.336] (II) VBoxVideo(0): X context handle = 0x1 [ 184.336] (II) VBoxVideo(0): [drm] installed DRM signal handler [ 184.336] (II) VBoxVideo(0): visual configurations initialized [ 184.359] (II) VBoxVideo(0): Requested monitor count: 1 [ 184.361] (II) VBoxVideo(0): Output VBOX0 has no monitor section [ 184.361] (II) VBoxVideo(0): Output VBOX0 has no monitor section [ 184.362] (II) VBoxVideo(0): EDID for output VBOX0 [ 184.362] (II) VBoxVideo(0): Manufacturer: VBX Model: 0 Serial#: 31457920 [ 184.362] (II) VBoxVideo(0): Year: 1990 Week: 1 [ 184.362] (II) VBoxVideo(0): EDID Version: 1.3 [ 184.362] (II) VBoxVideo(0): Digital Display Input [ 184.362] (II) VBoxVideo(0): Indeterminate output size [ 184.362] (II) VBoxVideo(0): Gamma: 2.20 [ 184.362] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off [ 184.362] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 184.362] (II) VBoxVideo(0): Default color space is primary color space [ 184.362] (II) VBoxVideo(0): First detailed timing is preferred mode [ 184.362] (II) VBoxVideo(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 [ 184.362] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329 [ 184.362] (II) VBoxVideo(0): Manufacturer's mask: 0 [ 184.362] (II) VBoxVideo(0): Supported detailed timing: [ 184.362] (II) VBoxVideo(0): clock: 18.8 MHz Image Size: 0 x 0 mm [ 184.362] (II) VBoxVideo(0): h_active: 640 h_sync: 642 h_sync_end 644 h_blank_end 646 h_border: 0 [ 184.363] (II) VBoxVideo(0): v_active: 480 v_sync: 482 v_sync_end 484 v_blanking: 486 v_border: 0 [ 184.363] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz [ 184.363] (II) VBoxVideo(0): Monitor name: VBOX monitor [ 184.363] (II) VBoxVideo(0): EDID (in hex): [ 184.363] (II) VBoxVideo(0): 00ffffffffffff00585800008002e001 [ 184.363] (II) VBoxVideo(0): 0100010380000078eeee91a3544c9926 [ 184.363] (II) VBoxVideo(0): 0f505400000001010101010101010101 [ 184.363] (II) VBoxVideo(0): 0101010101015b07800620e006100202 [ 184.363] (II) VBoxVideo(0): 2200000000000000000000fd0000c800 [ 184.363] (II) VBoxVideo(0): c864000a202020202020000000fc0056 [ 184.363] (II) VBoxVideo(0): 424f58206d6f6e69746f720a00000010 [ 184.363] (II) VBoxVideo(0): 000a20202020202020202020202000de [ 184.363] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 184.363] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync. [ 184.363] (II) VBoxVideo(0): Using hsync ranges from config file [ 184.363] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 184.363] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 184.364] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz eP) [ 184.364] (II) VBoxVideo(0): Printing probed modes for output VBOX0 [ 184.364] (II) VBoxVideo(0): Modeline "640x480"x60.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz Pb) [ 184.364] (II) VBoxVideo(0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b) [ 184.364] (II) VBoxVideo(0): Modeline "640x480"x60.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b) [ 184.364] (II) VBoxVideo(0): Output VBOX0 connected [ 184.364] (II) VBoxVideo(0): Using exact sizes for initial modes [ 184.364] (II) VBoxVideo(0): Output VBOX0 using initial mode 640x480 [ 184.364] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 184.364] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 184.367] (==) VBoxVideo(0): DPMS enabled [ 184.367] (II) VBoxVideo(0): [DRI] installation complete [ 184.367] (--) RandR disabled [ 184.367] (II) Initializing built-in extension Generic Event Extension [ 184.367] (II) Initializing built-in extension SHAPE [ 184.367] (II) Initializing built-in extension MIT-SHM [ 184.367] (II) Initializing built-in extension XInputExtension [ 184.367] (II) Initializing built-in extension XTEST [ 184.367] (II) Initializing built-in extension BIG-REQUESTS [ 184.367] (II) Initializing built-in extension SYNC [ 184.367] (II) Initializing built-in extension XKEYBOARD [ 184.367] (II) Initializing built-in extension XC-MISC [ 184.367] (II) Initializing built-in extension SECURITY [ 184.367] (II) Initializing built-in extension XINERAMA [ 184.367] (II) Initializing built-in extension XFIXES [ 184.367] (II) Initializing built-in extension RENDER [ 184.367] (II) Initializing built-in extension RANDR [ 184.367] (II) Initializing built-in extension COMPOSITE [ 184.367] (II) Initializing built-in extension DAMAGE [ 184.391] (II) AIGLX: Screen 0 is not DRI2 capable [ 184.391] drmOpenDevice: node name is /dev/dri/card0 [ 184.391] drmOpenDevice: open result is 11, (OK) [ 184.391] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 184.391] drmOpenDevice: node name is /dev/dri/card0 [ 184.391] drmOpenDevice: open result is 11, (OK) [ 184.391] drmOpenByBusid: drmOpenMinor returns 11 [ 184.391] drmOpenByBusid: Interface 1.4 failed, trying 1.1 [ 184.391] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 184.590] (II) Next line is added to allow vboxvideo_drv.so to appear as whitelisted driver [ 184.590] (II) The file referenced, is *NOT* loaded [ 184.591] (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so [ 184.591] (EE) AIGLX error: vboxvideo does not export required DRI extension [ 184.593] (EE) AIGLX: reverting to software rendering [ 185.467] (II) AIGLX: Loaded and initialized swrast [ 185.467] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 185.468] (II) VBoxVideo(0): Setting screen physical size to 169 x 126 [ 186.259] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 186.259] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 186.259] (II) LoadModule: "evdev" [ 186.261] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 186.274] (II) Module evdev: vendor="X.Org Foundation" [ 186.274] compiled for 1.12.0, module version = 2.7.0 [ 186.274] Module class: X.Org XInput Driver [ 186.274] ABI class: X.Org XInput driver, version 16.0 [ 186.275] (II) Using input driver 'evdev' for 'Power Button' [ 186.275] (**) Power Button: always reports core events [ 186.275] (**) evdev: Power Button: Device: "/dev/input/event1" [ 186.275] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 186.275] (--) evdev: Power Button: Found keys [ 186.275] (II) evdev: Power Button: Configuring as keyboard [ 186.275] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 186.275] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 186.275] (**) Option "xkb_rules" "evdev" [ 186.275] (**) Option "xkb_model" "pc105" [ 186.276] (**) Option "xkb_layout" "fr" [ 186.276] (**) Option "xkb_variant" "oss" [ 186.276] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 186.820] (II) config/udev: Adding input device Sleep Button (/dev/input/event2) [ 186.821] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 186.821] (II) Using input driver 'evdev' for 'Sleep Button' [ 186.821] (**) Sleep Button: always reports core events [ 186.821] (**) evdev: Sleep Button: Device: "/dev/input/event2" [ 186.821] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 186.821] (--) evdev: Sleep Button: Found keys [ 186.821] (II) evdev: Sleep Button: Configuring as keyboard [ 186.821] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input2/event2" [ 186.821] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7) [ 186.821] (**) Option "xkb_rules" "evdev" [ 186.821] (**) Option "xkb_model" "pc105" [ 186.821] (**) Option "xkb_layout" "fr" [ 186.821] (**) Option "xkb_variant" "oss" [ 186.821] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 186.825] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 186.825] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 186.825] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 186.825] (**) AT Translated Set 2 keyboard: always reports core events [ 186.825] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 186.826] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 186.826] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 186.826] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 186.826] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 186.826] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8) [ 186.826] (**) Option "xkb_rules" "evdev" [ 186.826] (**) Option "xkb_model" "pc105" [ 186.826] (**) Option "xkb_layout" "fr" [ 186.826] (**) Option "xkb_variant" "oss" [ 186.826] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 186.829] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event4) [ 186.829] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall" [ 186.829] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse' [ 186.829] (**) ImExPS/2 Generic Explorer Mouse: always reports core events [ 186.829] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event4" [ 186.830] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6 [ 186.830] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons [ 186.830] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s) [ 186.830] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes [ 186.830] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes [ 186.831] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse [ 186.831] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support [ 186.831] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5 [ 186.831] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 186.831] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4" [ 186.831] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 9) [ 186.831] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes. [ 186.832] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1 [ 186.832] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0 [ 186.832] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000 [ 186.832] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4 [ 186.834] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0) [ 186.834] (II) No input driver specified, ignoring this device. [ 186.834] (II) This device may have been added with another device file. [ 186.839] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event3) [ 186.839] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall" [ 186.839] (II) Using input driver 'evdev' for 'VirtualBox mouse integration' [ 186.839] (**) VirtualBox mouse integration: always reports core events [ 186.839] (**) evdev: VirtualBox mouse integration: Device: "/dev/input/event3" [ 186.841] (--) evdev: VirtualBox mouse integration: Vendor 0x80ee Product 0xcafe [ 186.841] (--) evdev: VirtualBox mouse integration: Found 1 mouse buttons [ 186.841] (--) evdev: VirtualBox mouse integration: Found absolute axes [ 186.841] (--) evdev: VirtualBox mouse integration: Found x and y absolute axes [ 186.841] (--) evdev: VirtualBox mouse integration: Found absolute touchscreen [ 186.841] (II) evdev: VirtualBox mouse integration: Configuring as touchscreen [ 186.841] (**) evdev: VirtualBox mouse integration: YAxisMapping: buttons 4 and 5 [ 186.841] (**) evdev: VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 186.841] (**) Option "config_info" "udev:/sys/devices/virtual/input/input3/event3" [ 186.841] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: TOUCHSCREEN, id 10) [ 186.842] (II) evdev: VirtualBox mouse integration: initialized for absolute axes. [ 186.842] (**) VirtualBox mouse integration: (accel) keeping acceleration scheme 1 [ 186.842] (**) VirtualBox mouse integration: (accel) acceleration profile 0 [ 186.843] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000 [ 186.843] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4 [ 189.536] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 189.536] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync. [ 189.537] (II) VBoxVideo(0): Using hsync ranges from config file [ 189.537] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 189.537] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 189.537] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz eP) [ 191.940] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 191.940] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 798x569 Warning: We only handle separate sync. [ 191.940] (II) VBoxVideo(0): Using hsync ranges from config file [ 191.941] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 191.941] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 191.941] (II) VBoxVideo(0): Modeline "798x569"x0.0 27.73 798 800 802 804 569 571 573 575 -hsync -vsync (34.5 kHz eP) [ 191.948] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 191.948] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 798x569 Warning: We only handle separate sync. [ 191.948] (II) VBoxVideo(0): Using hsync ranges from config file [ 191.948] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 191.948] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 191.948] (II) VBoxVideo(0): Modeline "798x569"x0.0 27.73 798 800 802 804 569 571 573 575 -hsync -vsync (34.5 kHz eP) [ 191.960] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 191.961] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 798x569 Warning: We only handle separate sync. [ 191.961] (II) VBoxVideo(0): Using hsync ranges from config file [ 191.961] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 191.961] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 191.961] (II) VBoxVideo(0): Modeline "798x569"x0.0 27.73 798 800 802 804 569 571 573 575 -hsync -vsync (34.5 kHz eP) [ 191.967] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 191.970] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 798x569 Warning: We only handle separate sync. [ 191.970] (II) VBoxVideo(0): Using hsync ranges from config file [ 191.970] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 191.970] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 191.970] (II) VBoxVideo(0): Modeline "798x569"x0.0 27.73 798 800 802 804 569 571 573 575 -hsync -vsync (34.5 kHz eP) [ 192.031] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 192.031] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 798x569 Warning: We only handle separate sync. [ 192.031] (II) VBoxVideo(0): Using hsync ranges from config file [ 192.031] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 192.031] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 192.031] (II) VBoxVideo(0): Modeline "798x569"x0.0 27.73 798 800 802 804 569 571 573 575 -hsync -vsync (34.5 kHz eP) [ 192.182] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 192.182] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 798x569 Warning: We only handle separate sync. [ 192.182] (II) VBoxVideo(0): Using hsync ranges from config file [ 192.182] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 192.182] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 192.182] (II) VBoxVideo(0): Modeline "798x569"x0.0 27.73 798 800 802 804 569 571 573 575 -hsync -vsync (34.5 kHz eP) [ 192.197] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 192.198] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 798x569 Warning: We only handle separate sync. [ 192.198] (II) VBoxVideo(0): Using hsync ranges from config file [ 192.199] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 192.199] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 192.199] (II) VBoxVideo(0): Modeline "798x569"x0.0 27.73 798 800 802 804 569 571 573 575 -hsync -vsync (34.5 kHz eP)