[ 37.728] X.Org X Server 1.12.3 Release Date: 2012-07-09 [ 37.731] X Protocol Version 11, Revision 0 [ 37.732] Build Operating System: Linux 3.4.4-3-ARCH i686 [ 37.735] Current Operating System: Linux pcolivier 3.4.4-2-ARCH #1 SMP PREEMPT Sun Jul 8 17:54:40 CEST 2012 i686 [ 37.736] Kernel command line: root=UUID=1c993bad-85b5-4edc-a57a-280a801b327b ro noautogroup ipv6.disable=1 video=SVIDEO-1:d initrd=/boot/initramfs-linux.img BOOT_IMAGE=/boot/vmlinuz-linux [ 37.739] Build Date: 09 July 2012 04:03:16PM [ 37.740] [ 37.741] Current version of pixman: 0.26.2 [ 37.743] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 37.743] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 37.754] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 17 09:46:08 2012 [ 37.802] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 37.869] (==) No Layout section. Using the first Screen section. [ 37.869] (==) No screen section available. Using defaults. [ 37.869] (**) |-->Screen "Default Screen Section" (0) [ 37.869] (**) | |-->Monitor "" [ 37.872] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 37.872] (==) Automatically adding devices [ 37.872] (==) Automatically enabling devices [ 37.937] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 37.937] Entry deleted from font path. [ 37.999] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ [ 37.999] (==) ModulePath set to "/usr/lib/xorg/modules" [ 37.999] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 37.999] (II) Loader magic: 0x82235a0 [ 37.999] (II) Module ABI versions: [ 37.999] X.Org ANSI C Emulation: 0.4 [ 37.999] X.Org Video Driver: 12.0 [ 37.999] X.Org XInput driver : 16.0 [ 37.999] X.Org Server Extension : 6.0 [ 38.008] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/16777216 [ 38.009] (II) Open ACPI successful (/var/run/acpid.socket) [ 38.010] (II) LoadModule: "extmod" [ 38.077] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 38.101] (II) Module extmod: vendor="X.Org Foundation" [ 38.101] compiled for 1.12.3, module version = 1.0.0 [ 38.101] Module class: X.Org Server Extension [ 38.101] ABI class: X.Org Server Extension, version 6.0 [ 38.101] (II) Loading extension MIT-SCREEN-SAVER [ 38.101] (II) Loading extension XFree86-VidModeExtension [ 38.101] (II) Loading extension XFree86-DGA [ 38.101] (II) Loading extension DPMS [ 38.102] (II) Loading extension XVideo [ 38.102] (II) Loading extension XVideo-MotionCompensation [ 38.102] (II) Loading extension X-Resource [ 38.102] (II) LoadModule: "dbe" [ 38.103] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 38.106] (II) Module dbe: vendor="X.Org Foundation" [ 38.106] compiled for 1.12.3, module version = 1.0.0 [ 38.106] Module class: X.Org Server Extension [ 38.106] ABI class: X.Org Server Extension, version 6.0 [ 38.106] (II) Loading extension DOUBLE-BUFFER [ 38.106] (II) LoadModule: "glx" [ 38.107] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 38.143] (II) Module glx: vendor="X.Org Foundation" [ 38.143] compiled for 1.12.3, module version = 1.0.0 [ 38.143] ABI class: X.Org Server Extension, version 6.0 [ 38.143] (==) AIGLX enabled [ 38.144] (II) Loading extension GLX [ 38.144] (II) LoadModule: "record" [ 38.146] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 38.158] (II) Module record: vendor="X.Org Foundation" [ 38.158] compiled for 1.12.3, module version = 1.13.0 [ 38.158] Module class: X.Org Server Extension [ 38.158] ABI class: X.Org Server Extension, version 6.0 [ 38.158] (II) Loading extension RECORD [ 38.158] (II) LoadModule: "dri" [ 38.159] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 38.195] (II) Module dri: vendor="X.Org Foundation" [ 38.195] compiled for 1.12.3, module version = 1.0.0 [ 38.195] ABI class: X.Org Server Extension, version 6.0 [ 38.196] (II) Loading extension XFree86-DRI [ 38.196] (II) LoadModule: "dri2" [ 38.197] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 38.200] (II) Module dri2: vendor="X.Org Foundation" [ 38.200] compiled for 1.12.3, module version = 1.2.0 [ 38.200] ABI class: X.Org Server Extension, version 6.0 [ 38.200] (II) Loading extension DRI2 [ 38.200] (==) Matched vboxvideo as autoconfigured driver 0 [ 38.200] (==) Matched vesa as autoconfigured driver 1 [ 38.200] (==) Matched fbdev as autoconfigured driver 2 [ 38.200] (==) Assigned the driver to the xf86ConfigLayout [ 38.200] (II) LoadModule: "vboxvideo" [ 38.216] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo.so [ 38.247] (II) Module vboxvideo: vendor="Oracle Corporation" [ 38.247] compiled for 1.5.99.901, module version = 1.0.1 [ 38.247] Module class: X.Org Video Driver [ 38.247] ABI class: X.Org Video Driver, version 12.0 [ 38.247] (**) Load address of symbol "VBOXVIDEO" is 0xb724c2e0 [ 38.247] (II) LoadModule: "vesa" [ 38.249] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 38.288] (II) Module vesa: vendor="X.Org Foundation" [ 38.288] compiled for 1.12.0, module version = 2.3.1 [ 38.288] Module class: X.Org Video Driver [ 38.288] ABI class: X.Org Video Driver, version 12.0 [ 38.288] (II) LoadModule: "fbdev" [ 38.291] (WW) Warning, couldn't open module fbdev [ 38.291] (II) UnloadModule: "fbdev" [ 38.291] (II) Unloading fbdev [ 38.291] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 38.291] (II) VBoxVideo: guest driver for VirtualBox: vbox [ 38.291] (II) VESA: driver for VESA chipsets: vesa [ 38.291] (--) using VT number 7 [ 38.354] (WW) Falling back to old probe method for vesa [ 38.367] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.1.18_OSE [ 38.367] (II) Loading sub module "ramdac" [ 38.367] (II) LoadModule: "ramdac" [ 38.367] (II) Module "ramdac" already built-in [ 38.367] (II) Loading sub module "fb" [ 38.367] (II) LoadModule: "fb" [ 38.368] (II) Loading /usr/lib/xorg/modules/libfb.so [ 38.388] (II) Module fb: vendor="X.Org Foundation" [ 38.388] compiled for 1.12.3, module version = 1.0.0 [ 38.388] ABI class: X.Org ANSI C Emulation, version 0.4 [ 38.389] (II) Loading sub module "shadowfb" [ 38.389] (II) LoadModule: "shadowfb" [ 38.391] (II) Loading /usr/lib/xorg/modules/libshadowfb.so [ 38.403] (II) Module shadowfb: vendor="X.Org Foundation" [ 38.404] compiled for 1.12.3, module version = 1.0.0 [ 38.404] ABI class: X.Org ANSI C Emulation, version 0.4 [ 38.404] (II) Loading sub module "vgahw" [ 38.404] (II) LoadModule: "vgahw" [ 38.405] (II) Loading /usr/lib/xorg/modules/libvgahw.so [ 38.408] (II) Module vgahw: vendor="X.Org Foundation" [ 38.408] compiled for 1.12.3, module version = 0.1.0 [ 38.408] ABI class: X.Org Video Driver, version 12.0 [ 38.408] (II) Loading sub module "dri" [ 38.408] (II) LoadModule: "dri" [ 38.409] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 38.409] (II) Module dri: vendor="X.Org Foundation" [ 38.409] compiled for 1.12.3, module version = 1.0.0 [ 38.409] ABI class: X.Org Server Extension, version 6.0 [ 38.412] (II) VBoxVideo(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 38.412] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32 [ 38.412] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000) [ 38.412] (**) VBoxVideo(0): Built-in mode "VBoxInitialMode": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz [ 38.412] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b) [ 38.412] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz [ 38.412] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b) [ 38.412] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz [ 38.412] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b) [ 38.412] (**) VBoxVideo(0): Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz [ 38.412] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b) [ 38.413] (**) VBoxVideo(0): Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz [ 38.413] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b) [ 38.413] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0 [ 38.413] (==) VBoxVideo(0): RGB weight 888 [ 38.413] (==) VBoxVideo(0): Default visual is TrueColor [ 38.413] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0) [ 38.413] (==) VBoxVideo(0): DPI set to (96, 96) [ 38.413] (II) UnloadModule: "vesa" [ 38.413] (II) Unloading vesa [ 38.413] (--) Depth 24 pixmap format is 32 bpp [ 38.997] drmOpenDevice: node name is /dev/dri/card0 [ 38.997] drmOpenDevice: open result is 10, (OK) [ 38.997] drmOpenDevice: node name is /dev/dri/card0 [ 38.997] drmOpenDevice: open result is 10, (OK) [ 38.997] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 38.997] drmOpenDevice: node name is /dev/dri/card0 [ 38.998] drmOpenDevice: open result is 10, (OK) [ 38.998] drmOpenByBusid: drmOpenMinor returns 10 [ 38.998] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 38.998] (II) [drm] DRM interface version 1.4 [ 38.998] (II) [drm] DRM open master succeeded. [ 38.998] (II) VBoxVideo(0): [drm] Using the DRM lock SAREA also for drawables. [ 38.998] (II) VBoxVideo(0): [drm] framebuffer handle = 0xe0000000 [ 38.998] (II) VBoxVideo(0): [drm] added 1 reserved context for kernel [ 38.999] (II) VBoxVideo(0): X context handle = 0x1 [ 38.999] (II) VBoxVideo(0): [drm] installed DRM signal handler [ 38.999] (II) VBoxVideo(0): visual configurations initialized [ 39.023] (II) VBoxVideo(0): Requested monitor count: 1 [ 39.024] (II) VBoxVideo(0): Output VBOX0 has no monitor section [ 39.024] (II) VBoxVideo(0): Output VBOX0 has no monitor section [ 39.025] (II) VBoxVideo(0): EDID for output VBOX0 [ 39.025] (II) VBoxVideo(0): Manufacturer: VBX Model: 0 Serial#: 31457920 [ 39.025] (II) VBoxVideo(0): Year: 1990 Week: 1 [ 39.025] (II) VBoxVideo(0): EDID Version: 1.3 [ 39.026] (II) VBoxVideo(0): Digital Display Input [ 39.026] (II) VBoxVideo(0): Indeterminate output size [ 39.026] (II) VBoxVideo(0): Gamma: 2.20 [ 39.026] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off [ 39.026] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 39.026] (II) VBoxVideo(0): Default color space is primary color space [ 39.026] (II) VBoxVideo(0): First detailed timing is preferred mode [ 39.026] (II) VBoxVideo(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 [ 39.026] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329 [ 39.026] (II) VBoxVideo(0): Manufacturer's mask: 0 [ 39.026] (II) VBoxVideo(0): Supported detailed timing: [ 39.026] (II) VBoxVideo(0): clock: 18.8 MHz Image Size: 0 x 0 mm [ 39.026] (II) VBoxVideo(0): h_active: 640 h_sync: 642 h_sync_end 644 h_blank_end 646 h_border: 0 [ 39.026] (II) VBoxVideo(0): v_active: 480 v_sync: 482 v_sync_end 484 v_blanking: 486 v_border: 0 [ 39.026] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz [ 39.026] (II) VBoxVideo(0): Monitor name: VBOX monitor [ 39.026] (II) VBoxVideo(0): EDID (in hex): [ 39.026] (II) VBoxVideo(0): 00ffffffffffff00585800008002e001 [ 39.026] (II) VBoxVideo(0): 0100010380000078eeee91a3544c9926 [ 39.026] (II) VBoxVideo(0): 0f505400000001010101010101010101 [ 39.026] (II) VBoxVideo(0): 0101010101015b07800620e006100202 [ 39.026] (II) VBoxVideo(0): 2200000000000000000000fd0000c800 [ 39.027] (II) VBoxVideo(0): c864000a202020202020000000fc0056 [ 39.027] (II) VBoxVideo(0): 424f58206d6f6e69746f720a00000010 [ 39.027] (II) VBoxVideo(0): 000a20202020202020202020202000de [ 39.027] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 39.027] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync. [ 39.027] (II) VBoxVideo(0): Using hsync ranges from config file [ 39.027] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 39.027] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 39.027] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz eP) [ 39.027] (II) VBoxVideo(0): Printing probed modes for output VBOX0 [ 39.027] (II) VBoxVideo(0): Modeline "640x480"x60.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz Pb) [ 39.027] (II) VBoxVideo(0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b) [ 39.027] (II) VBoxVideo(0): Modeline "640x480"x60.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b) [ 39.027] (II) VBoxVideo(0): Output VBOX0 connected [ 39.028] (II) VBoxVideo(0): Using exact sizes for initial modes [ 39.028] (II) VBoxVideo(0): Output VBOX0 using initial mode 640x480 [ 39.028] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 39.028] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 39.030] (==) VBoxVideo(0): DPMS enabled [ 39.030] (II) VBoxVideo(0): [DRI] installation complete [ 39.030] (--) RandR disabled [ 39.030] (II) Initializing built-in extension Generic Event Extension [ 39.030] (II) Initializing built-in extension SHAPE [ 39.030] (II) Initializing built-in extension MIT-SHM [ 39.030] (II) Initializing built-in extension XInputExtension [ 39.030] (II) Initializing built-in extension XTEST [ 39.030] (II) Initializing built-in extension BIG-REQUESTS [ 39.030] (II) Initializing built-in extension SYNC [ 39.030] (II) Initializing built-in extension XKEYBOARD [ 39.030] (II) Initializing built-in extension XC-MISC [ 39.030] (II) Initializing built-in extension SECURITY [ 39.031] (II) Initializing built-in extension XINERAMA [ 39.031] (II) Initializing built-in extension XFIXES [ 39.031] (II) Initializing built-in extension RENDER [ 39.031] (II) Initializing built-in extension RANDR [ 39.031] (II) Initializing built-in extension COMPOSITE [ 39.031] (II) Initializing built-in extension DAMAGE [ 39.052] (II) AIGLX: Screen 0 is not DRI2 capable [ 39.052] drmOpenDevice: node name is /dev/dri/card0 [ 39.052] drmOpenDevice: open result is 11, (OK) [ 39.053] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 39.053] drmOpenDevice: node name is /dev/dri/card0 [ 39.053] drmOpenDevice: open result is 11, (OK) [ 39.053] drmOpenByBusid: drmOpenMinor returns 11 [ 39.053] drmOpenByBusid: Interface 1.4 failed, trying 1.1 [ 39.053] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 39.174] (II) Next line is added to allow vboxvideo_drv.so to appear as whitelisted driver [ 39.174] (II) The file referenced, is *NOT* loaded [ 39.174] (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so [ 39.175] (EE) AIGLX error: vboxvideo does not export required DRI extension [ 39.176] (EE) AIGLX: reverting to software rendering [ 39.963] (II) AIGLX: Loaded and initialized swrast [ 39.963] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 39.964] (II) VBoxVideo(0): Setting screen physical size to 169 x 126 [ 40.821] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 40.821] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 40.821] (II) LoadModule: "evdev" [ 40.823] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 40.848] (II) Module evdev: vendor="X.Org Foundation" [ 40.848] compiled for 1.12.0, module version = 2.7.0 [ 40.848] Module class: X.Org XInput Driver [ 40.848] ABI class: X.Org XInput driver, version 16.0 [ 40.848] (II) Using input driver 'evdev' for 'Power Button' [ 40.848] (**) Power Button: always reports core events [ 40.848] (**) evdev: Power Button: Device: "/dev/input/event1" [ 40.849] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 40.849] (--) evdev: Power Button: Found keys [ 40.849] (II) evdev: Power Button: Configuring as keyboard [ 40.849] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 40.849] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 40.849] (**) Option "xkb_rules" "evdev" [ 40.849] (**) Option "xkb_model" "pc105" [ 40.849] (**) Option "xkb_layout" "fr" [ 40.849] (**) Option "xkb_variant" "oss" [ 40.849] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 41.065] (II) config/udev: Adding input device Sleep Button (/dev/input/event2) [ 41.065] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 41.065] (II) Using input driver 'evdev' for 'Sleep Button' [ 41.065] (**) Sleep Button: always reports core events [ 41.065] (**) evdev: Sleep Button: Device: "/dev/input/event2" [ 41.065] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 41.065] (--) evdev: Sleep Button: Found keys [ 41.065] (II) evdev: Sleep Button: Configuring as keyboard [ 41.065] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input2/event2" [ 41.065] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7) [ 41.065] (**) Option "xkb_rules" "evdev" [ 41.065] (**) Option "xkb_model" "pc105" [ 41.065] (**) Option "xkb_layout" "fr" [ 41.065] (**) Option "xkb_variant" "oss" [ 41.066] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 41.069] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 41.069] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 41.069] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 41.069] (**) AT Translated Set 2 keyboard: always reports core events [ 41.069] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 41.069] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 41.069] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 41.069] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 41.069] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 41.069] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8) [ 41.069] (**) Option "xkb_rules" "evdev" [ 41.069] (**) Option "xkb_model" "pc105" [ 41.069] (**) Option "xkb_layout" "fr" [ 41.069] (**) Option "xkb_variant" "oss" [ 41.069] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 41.073] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event3) [ 41.073] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall" [ 41.073] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse' [ 41.073] (**) ImExPS/2 Generic Explorer Mouse: always reports core events [ 41.073] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event3" [ 41.074] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6 [ 41.074] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons [ 41.074] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s) [ 41.074] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes [ 41.074] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes [ 41.074] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse [ 41.074] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support [ 41.074] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5 [ 41.074] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 41.074] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input3/event3" [ 41.074] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 9) [ 41.074] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes. [ 41.075] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1 [ 41.075] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0 [ 41.075] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000 [ 41.075] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4 [ 41.077] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0) [ 41.077] (II) No input driver specified, ignoring this device. [ 41.077] (II) This device may have been added with another device file. [ 41.082] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event4) [ 41.082] (II) No input driver specified, ignoring this device. [ 41.082] (II) This device may have been added with another device file. [ 43.631] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0 [ 43.631] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 640x480 Warning: We only handle separate sync. [ 43.631] (II) VBoxVideo(0): Using hsync ranges from config file [ 43.631] (II) VBoxVideo(0): Using vrefresh ranges from config file [ 43.631] (II) VBoxVideo(0): Printing DDC gathered Modelines: [ 43.631] (II) VBoxVideo(0): Modeline "640x480"x0.0 18.83 640 642 644 646 480 482 484 486 -hsync -vsync (29.1 kHz eP)