Linux version 2.6.32-ARCH (thomas@evey) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Mon Mar 15 20:08:25 UTC 2010 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) DMI 2.2 present. last_pfn = 0x1fff0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-FFFFF uncachable MTRR variable ranges enabled: 0 base 000000000 mask FE0000000 write-back 1 base 0E8000000 mask FF8000000 write-combining 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled PAT not supported by CPU. e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000002000 (usable) modified: 0000000000002000 - 0000000000006000 (reserved) modified: 0000000000006000 - 00000000000a0000 (usable) modified: 00000000000f0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000001fff0000 (usable) modified: 000000001fff0000 - 000000001fff3000 (ACPI NVS) modified: 000000001fff3000 - 0000000020000000 (ACPI data) modified: 00000000ffff0000 - 0000000100000000 (reserved) initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-000000001fff0000 0000000000 - 0000400000 page 4k 0000400000 - 001fc00000 page 2M 001fc00000 - 001fff0000 page 4k kernel direct mapping tables up to 1fff0000 @ 7000-c000 RAMDISK: 1fe08000 - 1ffdf819 ACPI: RSDP 000f6b30 00014 (v00 GBT ) ACPI: RSDT 1fff3000 00028 (v01 GBT AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 1fff3040 00074 (v01 GBT AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 1fff30c0 021D0 (v01 GBT AWRDACPI 00001000 MSFT 0100000C) ACPI: FACS 1fff0000 00040 0MB HIGHMEM available. 511MB LOWMEM available. mapped low ram: 0 - 1fff0000 low ram: 0 - 1fff0000 node 0 low ram: 00000000 - 1fff0000 node 0 bootmap 00008000 - 0000c000 (9 early reservations) ==> bootmem [0000000000 - 001fff0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0001000000 - 000152f024] TEXT DATA BSS ==> [0001000000 - 000152f024] #4 [001fe08000 - 001ffdf819] RAMDISK ==> [001fe08000 - 001ffdf819] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #6 [0001530000 - 00015360b2] BRK ==> [0001530000 - 00015360b2] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #8 [0000008000 - 000000c000] BOOTMAP ==> [0000008000 - 000000c000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0001fff0 HighMem 0x0001fff0 -> 0x0001fff0 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x00000002 0: 0x00000006 -> 0x000000a0 0: 0x00000100 -> 0x0001fff0 On node 0 totalpages: 130956 free_area_init_node: node 0, pgdat c13dbe60, node_mem_map c1538000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3964 pages, LIFO batch:0 Normal zone: 992 pages used for memmap Normal zone: 125968 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x4008 SMP: Allowing 1 CPUs, 0 hotplug CPUs Local APIC disabled by BIOS -- you can enable it with "lapic" APIC: disable apic facility nr_irqs_gsi: 16 PM: Registered nosave memory: 0000000000002000 - 0000000000006000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 20000000 (gap: 20000000:dfff0000) Booting paravirtualized kernel on bare hardware NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 14 pages/cpu @c1c00000 s34680 r0 d22664 u4194304 pcpu-alloc: s34680 r0 d22664 u4194304 alloc=1*4194304 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129932 Kernel command line: root=/dev/sda12 rootfstype=ext4 ro PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (00000000:00000000) Memory: 511820k/524224k available (2797k kernel code, 11828k reserved, 1185k data, 412k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB) lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) .init : 0xc13e4000 - 0xc144b000 ( 412 kB) .data : 0xc12bb55a - 0xc13e3a08 (1185 kB) .text : 0xc1000000 - 0xc12bb55a (2797 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:512 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 930.815 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 1862.19 BogoMIPS (lpj=3102716) Security Framework initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. mce: CPU supports 5 MCE banks Performance Events: no APIC, boot with the "lapic" boot parameter to force-enable it. no hardware sampling interrupt available. p6 PMU driver. ... version: 0 ... bit width: 32 ... generic registers: 2 ... value mask: 00000000ffffffff ... max period: 000000007fffffff ... fixed-purpose events: 0 ... event mask: 0000000000000003 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed ACPI: Core revision 20090903 ACPI: setting ELCR to 0200 (from 1e00) weird, boot CPU (#0) not listed by the BIOS. SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. SMP disabled Brought up 1 CPUs Total of 1 processors activated (1862.19 BogoMIPS). CPU0 attaching NULL sched-domain. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb380, last bus=1 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using PIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff] pci 0000:00:07.1: reg 20 io port: [0xd000-0xd00f] pci 0000:00:07.2: reg 20 io port: [0xd400-0xd41f] pci 0000:00:09.0: reg 20 io port: [0xd800-0xd81f] pci 0000:00:09.0: supports D1 D2 pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:09.0: PME# disabled pci 0000:00:09.1: reg 20 io port: [0xdc00-0xdc1f] pci 0000:00:09.1: supports D1 D2 pci 0000:00:09.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:09.1: PME# disabled pci 0000:00:09.2: reg 10 32bit mmio: [0xf4000000-0xf40000ff] pci 0000:00:09.2: supports D1 D2 pci 0000:00:09.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:09.2: PME# disabled pci 0000:00:0a.0: reg 10 io port: [0xe000-0xe0ff] pci 0000:00:0a.0: reg 14 32bit mmio: [0xf4005000-0xf40050ff] pci 0000:00:0a.0: reg 30 32bit mmio pref: [0xf2000000-0xf200ffff] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0b.0: reg 10 32bit mmio: [0xf4001000-0xf4001fff] pci 0000:00:0b.0: supports D1 D2 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xf0000000-0xf0ffffff] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xd8000000-0xdfffffff] pci 0000:01:00.0: reg 18 32bit mmio pref: [0xe0000000-0xe007ffff] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:00:01.0: bridge 32bit mmio: [0xf0000000-0xf1ffffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xe7ffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0xd0000-0xd1fff has been reserved system 00:00: iomem range 0xf0000-0xf7fff could not be reserved system 00:00: iomem range 0xf8000-0xfbfff could not be reserved system 00:00: iomem range 0xfc000-0xfffff could not be reserved system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved system 00:00: iomem range 0xffff0000-0xffffffff has been reserved system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved system 00:02: ioport range 0x3f0-0x3f1 has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xf0000000-0xf1ffffff pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xe7ffffff pci 0000:00:0b.0: CardBus bridge, secondary bus 0000:02 pci 0000:00:0b.0: IO window: 0x001000-0x0010ff pci 0000:00:0b.0: IO window: 0x001400-0x0014ff pci 0000:00:0b.0: PREFETCH window: 0x20000000-0x23ffffff pci 0000:00:0b.0: MEM window: 0x24000000-0x27ffffff pci 0000:00:01.0: setting latency timer to 64 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered pci 0000:00:0b.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 1 mem: [0xf0000000-0xf1ffffff] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xe7ffffff] pci_bus 0000:02: resource 0 io: [0x1000-0x10ff] pci_bus 0000:02: resource 1 io: [0x1400-0x14ff] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x23ffffff] pci_bus 0000:02: resource 3 mem: [0x24000000-0x27ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 pci 0000:00:01.0: disabling DAC on VIA PCI bridge pci 0000:00:07.0: Activating ISA DMA hang workarounds pci 0000:01:00.0: Boot video device Unpacking initramfs... Freeing initrd memory: 1886k freed apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1293063732.290:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1003 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) isapnp: Scanning for PnP cards... 01:01: card 'OPTi Audio 16' isapnp: 1 Plug & Play card detected total Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode PM: Resume from disk failed. registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 412k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 SCSI subsystem initialized libata version 3.00 loaded. pata_via 0000:00:07.1: version 0.3.4 scsi0 : pata_via scsi1 : pata_via ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14 ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15 ata2.01: ATA-7: SAMSUNG SP1614N, TM100-24, max UDMA/100 ata2.01: 312581808 sectors, multi 16: LBA48 ata2.01: configured for UDMA/66 scsi 1:0:1:0: Direct-Access ATA SAMSUNG SP1614N TM10 PQ: 0 ANSI: 5 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb sd 1:0:1:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 1:0:1:0: [sda] Write Protect is off sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:09.2: PCI INT C -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:09.2: EHCI Host Controller ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:09.2: irq 10, io mem 0xf4000000 sda1 sda2 < ehci_hcd 0000:00:09.2: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 > sd 1:0:1:0: [sda] Attached SCSI disk uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:07.2: irq 10, io base 0x0000d400 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered uhci_hcd 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 12 (level, low) -> IRQ 12 uhci_hcd 0000:00:09.0: UHCI Host Controller uhci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:09.0: irq 12, io base 0x0000d800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered uhci_hcd 0000:00:09.1: PCI INT B -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:09.1: UHCI Host Controller uhci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:09.1: irq 11, io base 0x0000dc00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-4: new high speed USB device using ehci_hcd and address 3 usb 1-4: configuration #1 chosen from 1 choice usb 3-2: new low speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev FDC 0 is a post-1991 82077 input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:09.0/usb3/3-2/3-2:1.0/input/input2 generic-usb 0003:062A:0003.0001: input,hidraw0: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:09.0-2/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver EXT4-fs (sda12): mounted filesystem with ordered data mode rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram udev: starting version 151 8139too Fast Ethernet driver 0.9.28 8139too 0000:00:0a.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 eth0: RealTek RTL8139 at 0xe0b70000, 00:50:22:8d:9b:36, IRQ 11 sd 1:0:1:0: Attached scsi generic sg0 type 0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 input: PC Speaker as /devices/platform/pcspkr/input/input3 Linux agpgart interface v0.103 Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 ACPI: Power Button [PWRF] Marking TSC unstable due to TSC halts in idle processor LNXCPU:00: registered as cooling_device0 Switching to clocksource acpi_pm agpgart: Detected VIA Apollo Pro 133 chipset lp: driver loaded but no devices found agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] yenta_cardbus 0000:00:0b.0: CardBus bridge found [0000:0000] lp0: using parport0 (interrupt-driven). yenta_cardbus 0000:00:0b.0: ISA IRQ mask 0x0000, PCI irq 10 yenta_cardbus 0000:00:0b.0: Socket status: 30000006 ppdev: user-space parallel port driver pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. Adding 248968k swap on /dev/sda8. Priority:-1 extents:1 across:248968k eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS sd 2:0:0:0: Attached scsi generic sg1 type 0 usb-storage: device scan complete sd 2:0:0:0: [sdb] 7936000 512-byte logical blocks: (4.06 GB/3.78 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] Attached SCSI removable disk opti9xx 01:01.01: activated opti9xx 01:01.03: activated WSS dma2 # 3 not valid MPU-401 irq # -1 not valid