Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.35-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Sat Oct 30 21:22:26 CEST 2010 Command line: root=/dev/mapper/isw_bgjccgjjai_Volume0p6 ro i8042.nopnp i8042.reset elevator=noop BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000094000 (usable) BIOS-e820: 0000000000094000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000009363f000 (usable) BIOS-e820: 000000009363f000 - 00000000936bf000 (reserved) BIOS-e820: 00000000936bf000 - 00000000937bf000 (ACPI NVS) BIOS-e820: 00000000937bf000 - 00000000937ff000 (ACPI data) BIOS-e820: 00000000937ff000 - 0000000093800000 (usable) BIOS-e820: 0000000093800000 - 00000000a0000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000158000000 (usable) NX (Execute Disable) protection: active DMI 2.4 present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x158000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 0FFE00000 mask FFFE00000 write-protect 2 base 080000000 mask FE0000000 write-back 3 base 098000000 mask FF8000000 uncachable 4 base 094000000 mask FFC000000 uncachable 5 base 093800000 mask FFF800000 uncachable 6 base 100000000 mask F80000000 write-back 7 base 160000000 mask FE0000000 uncachable x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0x93800 max_arch_pfn = 0x400000000 e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 0000000000094000 (usable) modified: 0000000000094000 - 00000000000a0000 (reserved) modified: 00000000000e0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000009363f000 (usable) modified: 000000009363f000 - 00000000936bf000 (reserved) modified: 00000000936bf000 - 00000000937bf000 (ACPI NVS) modified: 00000000937bf000 - 00000000937ff000 (ACPI data) modified: 00000000937ff000 - 0000000093800000 (usable) modified: 0000000093800000 - 00000000a0000000 (reserved) modified: 00000000f0000000 - 00000000f4000000 (reserved) modified: 00000000feb00000 - 00000000feb04000 (reserved) modified: 00000000fec00000 - 00000000fec01000 (reserved) modified: 00000000fed10000 - 00000000fed14000 (reserved) modified: 00000000fed18000 - 00000000fed1a000 (reserved) modified: 00000000fed1b000 - 00000000fed20000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ffe00000 - 0000000100000000 (reserved) modified: 0000000100000000 - 0000000158000000 (usable) initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-0000000093800000 0000000000 - 0093800000 page 2M kernel direct mapping tables up to 93800000 @ 16000-1a000 init_memory_mapping: 0000000100000000-0000000158000000 0100000000 - 0158000000 page 2M kernel direct mapping tables up to 158000000 @ 18000-1f000 RAMDISK: 37e5a000 - 37ff0000 ACPI: RSDP 00000000000fe020 00024 (v02 Sony) ACPI: XSDT 00000000937fe120 00074 (v01 Sony VAIO 20100531 01000013) ACPI: FACP 00000000937fc000 000F4 (v04 Sony VAIO 20100531 MSFT 01000013) ACPI: DSDT 00000000937ed000 0B0CD (v02 Sony VAIO 20100531 MSFT 01000013) ACPI: FACS 000000009376f000 00040 ACPI: ASF! 00000000937fd000 000A5 (v32 Sony VAIO 20100531 MSFT 01000013) ACPI: HPET 00000000937fb000 00038 (v01 Sony VAIO 20100531 MSFT 01000013) ACPI: APIC 00000000937fa000 0008C (v02 Sony VAIO 20100531 MSFT 01000013) ACPI: MCFG 00000000937f9000 0003C (v01 Sony VAIO 20100531 MSFT 01000013) ACPI: SLIC 00000000937ec000 00176 (v01 Sony VAIO 20100531 MSFT 01000013) ACPI: BOOT 00000000937eb000 00028 (v01 Sony VAIO 20100531 MSFT 01000013) ACPI: SSDT 00000000937e9000 001B4 (v01 Sony VAIO 20100531 INTL 20051117) ACPI: ASPT 00000000937e6000 00034 (v04 Sony VAIO 20100531 MSFT 01000013) ACPI: SSDT 00000000937e5000 009F1 (v01 Sony VAIO 20100531 INTL 20051117) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880002000000-ffff8800055fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00158000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000010 -> 0x00000094 0: 0x00000100 -> 0x0009363f 0: 0x000937ff -> 0x00093800 0: 0x00100000 -> 0x00158000 On node 0 totalpages: 964036 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3916 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 585336 pages, LIFO batch:31 Normal zone: 4928 pages used for memmap Normal zone: 355520 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 8 CPUs, 6 hotplug CPUs nr_irqs_gsi: 40 early_res array is doubled to 64 at [1a1e0 - 1a9df] PM: Registered nosave memory: 0000000000094000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 000000009363f000 - 00000000936bf000 PM: Registered nosave memory: 00000000936bf000 - 00000000937bf000 PM: Registered nosave memory: 00000000937bf000 - 00000000937ff000 PM: Registered nosave memory: 0000000093800000 - 00000000a0000000 PM: Registered nosave memory: 00000000a0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 PM: Registered nosave memory: 00000000f4000000 - 00000000feb00000 PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000 PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000 PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 Allocating PCI resources starting at a0000000 (gap: a0000000:50000000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88832 r8192 d21760 u262144 early_res array is doubled to 128 at [1a9e0 - 1b9df] pcpu-alloc: s88832 r8192 d21760 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 944772 Kernel command line: root=/dev/mapper/isw_bgjccgjjai_Volume0p6 ro i8042.nopnp i8042.reset elevator=noop PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Subtract (66 early reservations) #1 [0001000000 - 00016f9598] TEXT DATA BSS #2 [0037e5a000 - 0037ff0000] RAMDISK #3 [0000094000 - 0000100000] BIOS reserved #4 [00016fa000 - 00016fa1fc] BRK #5 [0000010000 - 0000012000] TRAMPOLINE #6 [0000012000 - 0000016000] ACPI WAKEUP #7 [0000016000 - 0000018000] PGTABLE #8 [0000018000 - 000001a000] PGTABLE #9 [00016fa200 - 00016fb200] BOOTMEM #10 [000001a000 - 000001a1e0] BOOTMEM #11 [0001efc000 - 0001efd000] BOOTMEM #12 [0001efd000 - 0001efe000] BOOTMEM #13 [0002000000 - 0005600000] MEMMAP 0 #14 [00016fb200 - 0001713200] BOOTMEM #15 [0001713200 - 000172b200] BOOTMEM #16 [000172b200 - 0001743200] BOOTMEM #17 [0001744000 - 0001745000] BOOTMEM #18 [00016f95c0 - 00016f9601] BOOTMEM #19 [00016f9640 - 00016f9683] BOOTMEM #20 [00016f96c0 - 00016f9ae8] BOOTMEM #21 [00016f9b00 - 00016f9b68] BOOTMEM #22 [00016f9b80 - 00016f9be8] BOOTMEM #23 [00016f9c00 - 00016f9c68] BOOTMEM #24 [00016f9c80 - 00016f9ce8] BOOTMEM #25 [00016f9d00 - 00016f9d68] BOOTMEM #26 [00016f9d80 - 00016f9de8] BOOTMEM #27 [00016f9e00 - 00016f9e68] BOOTMEM #28 [00016f9e80 - 00016f9ee8] BOOTMEM #29 [00016f9f00 - 00016f9f68] BOOTMEM #30 [00016f9f80 - 00016f9fe8] BOOTMEM #31 [0001743200 - 0001743268] BOOTMEM #32 [0001743280 - 00017432e8] BOOTMEM #33 [0001743300 - 0001743368] BOOTMEM #34 [0001743380 - 00017433e8] BOOTMEM #35 [0001743400 - 0001743468] BOOTMEM #36 [0001743480 - 00017434e8] BOOTMEM #37 [0001743500 - 0001743568] BOOTMEM #38 [0001743580 - 00017435e8] BOOTMEM #39 [0001743600 - 0001743620] BOOTMEM #40 [0001743640 - 0001743660] BOOTMEM #41 [0001743680 - 00017436a0] BOOTMEM #42 [00017436c0 - 0001743713] BOOTMEM #43 [0001743740 - 0001743793] BOOTMEM #44 [0001800000 - 000181d000] BOOTMEM #45 [0001840000 - 000185d000] BOOTMEM #46 [0001880000 - 000189d000] BOOTMEM #47 [00018c0000 - 00018dd000] BOOTMEM #48 [0001900000 - 000191d000] BOOTMEM #49 [0001940000 - 000195d000] BOOTMEM #50 [0001980000 - 000199d000] BOOTMEM #51 [00019c0000 - 00019dd000] BOOTMEM #52 [00017437c0 - 00017437c8] BOOTMEM #53 [0001743800 - 0001743808] BOOTMEM #54 [0001743840 - 0001743860] BOOTMEM #55 [0001743880 - 00017438c0] BOOTMEM #56 [00017438c0 - 00017439e0] BOOTMEM #57 [0001743a00 - 0001743a48] BOOTMEM #58 [0001743a80 - 0001743ac8] BOOTMEM #59 [0001745000 - 000174d000] BOOTMEM #60 [00019dd000 - 0001ddd000] BOOTMEM #61 [0005600000 - 0005800000] BOOTMEM #62 [0005800000 - 0009800000] BOOTMEM #63 [000174d000 - 000176d000] BOOTMEM #64 [000176d000 - 00017ad000] BOOTMEM #65 [000001ba00 - 0000023a00] BOOTMEM Memory: 3718668k/5636096k available (3545k kernel code, 1779952k absent, 137476k reserved, 1831k data, 488k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:768 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled allocated 39321600 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT Detected 2526.813 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.19 BogoMIPS (lpj=8422710) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 9 MCE banks CPU0: Thermal monitoring handled by SMI using mwait in idle threads. Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f ACPI: Core revision 20100428 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz stepping 02 Booting Node 0, Processors #1 CPU1: Thermal monitoring handled by SMI Brought up 2 CPUs Total of 2 processors activated (10111.36 BogoMIPS). devtmpfs: initialized NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 0000000093690918 00424 (v01 Sony VAIO 20100531 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00424 (v01 Sony VAIO 20100531 INTL 20051117) ACPI: SSDT 000000009368e618 005CD (v01 Sony VAIO 20100531 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 005CD (v01 Sony VAIO 20100531 INTL 20051117) ACPI: SSDT 000000009368fa98 00303 (v01 Sony VAIO 20100531 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00303 (v01 Sony VAIO 20100531 INTL 20051117) ACPI: SSDT 000000009368dd98 00119 (v01 Sony VAIO 20100531 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00119 (v01 Sony VAIO 20100531 INTL 20051117) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: Power Resource [DGPR] (on) ACPI: Power Resource [MGPR] (on) ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 8 1f ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfeafffff] pci 0000:00:02.0: reg 10: [mem 0xb0000000-0xb03fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xa0000000-0xafffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0x6078-0x607f] pci 0000:00:16.0: reg 10: [mem 0xb6428100-0xb642810f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:16.0: PME# disabled pci 0000:00:19.0: reg 10: [mem 0xb6400000-0xb641ffff] pci 0000:00:19.0: reg 14: [mem 0xb6425000-0xb6425fff] pci 0000:00:19.0: reg 18: [io 0x6040-0x605f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 10: [mem 0xb6427c00-0xb6427fff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xb6420000-0xb6423fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1d.0: reg 10: [mem 0xb6427800-0xb6427bff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1f.2: reg 10: [io 0x6068-0x606f] pci 0000:00:1f.2: reg 14: [io 0x6084-0x6087] pci 0000:00:1f.2: reg 18: [io 0x6060-0x6067] pci 0000:00:1f.2: reg 1c: [io 0x6080-0x6083] pci 0000:00:1f.2: reg 20: [io 0x6020-0x603f] pci 0000:00:1f.2: reg 24: [mem 0xb6427000-0xb64277ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10: [mem 0xb6428000-0xb64280ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x6000-0x601f] pci 0000:00:1f.6: reg 10: [mem 0xb6424000-0xb6424fff 64bit] pci 0000:02:00.0: reg 10: [mem 0xb5400000-0xb5401fff 64bit] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.0: bridge window [mem 0xb5400000-0xb63fffff] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb13fffff 64bit pref] pci 0000:03:00.0: reg 10: [mem 0xb4400a00-0xb4400aff] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:03:00.1: reg 10: [mem 0xb4400900-0xb44009ff] pci 0000:03:00.1: supports D1 D2 pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.1: PME# disabled pci 0000:03:00.4: reg 10: [mem 0xb4400800-0xb44008ff] pci 0000:03:00.4: supports D1 D2 pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.4: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.1: bridge window [mem 0xb4400000-0xb53fffff] pci 0000:00:1c.1: bridge window [mem 0xb1400000-0xb23fffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.2: bridge window [mem 0xb3400000-0xb43fffff] pci 0000:00:1c.2: bridge window [mem 0xb2400000-0xb33fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 19 1f ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f]) pci_bus 0000:3f: on NUMA node 0 ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) HEST: Table is not found! vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 0000000000094000 - 000000000009ffff reserve RAM buffer: 000000009363f000 - 0000000093ffffff reserve RAM buffer: 0000000093800000 - 0000000093ffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:05: [io 0x0680-0x069f] has been reserved system 00:05: [io 0x0800-0x080f] has been reserved system 00:05: [io 0x0810-0x0813] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0x0400-0x047f] has been reserved system 00:05: [io 0x0500-0x057f] has been reserved system 00:05: [io 0x164e-0x164f] has been reserved system 00:05: [io 0x2000] has been reserved system 00:05: [io 0x2004] has been reserved system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:08: [mem 0xff000000-0xffffffff] could not be reserved system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:08: [mem 0xb6500000-0xb6500fff] has been reserved pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.0: bridge window [mem 0xb5400000-0xb63fffff] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb13fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.1: bridge window [mem 0xb4400000-0xb53fffff] pci 0000:00:1c.1: bridge window [mem 0xb1400000-0xb23fffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 04-0b] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.2: bridge window [mem 0xb3400000-0xb43fffff] pci 0000:00:1c.2: bridge window [mem 0xb2400000-0xb33fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] pci_bus 0000:02: resource 1 [mem 0xb5400000-0xb63fffff] pci_bus 0000:02: resource 2 [mem 0xb0400000-0xb13fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] pci_bus 0000:03: resource 1 [mem 0xb4400000-0xb53fffff] pci_bus 0000:03: resource 2 [mem 0xb1400000-0xb23fffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] pci_bus 0000:04: resource 1 [mem 0xb3400000-0xb43fffff] pci_bus 0000:04: resource 2 [mem 0xb2400000-0xb33fffff 64bit pref] pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:0c: resource 5 [io 0x0d00-0xffff] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:0c: resource 7 [mem 0xa0000000-0xfeafffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS 64 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 1624k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880005800000 - ffff880009800000 software IO TLB at phys 0x5800000 - 0x9800000 Simple Boot Flag at 0x44 set to 0x1 Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1291273977.523:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7266 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered (default) io scheduler deadline registered io scheduler cfq registered pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X ERST: Table is not found! Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled i8042: PNP detection disabled i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 488k freed udev[38]: starting version 164 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:1f.2: irq 43 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1f impl RAID mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xb6427000 port 0xb6427100 irq 43 ata2: SATA max UDMA/133 abar m2048@0xb6427000 port 0xb6427180 irq 43 ata3: SATA max UDMA/133 abar m2048@0xb6427000 port 0xb6427200 irq 43 ata4: SATA max UDMA/133 abar m2048@0xb6427000 port 0xb6427280 irq 43 ata5: SATA max UDMA/133 abar m2048@0xb6427000 port 0xb6427300 irq 43 ata6: DUMMY ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata1.00: ATA-8: TOSHIBA THNS064GG2BNAA, AGSA0203, max UDMA/100 ata1.00: 125045424 sectors, multi 16: LBA48 ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA TOSHIBA THNS064G AGSA PQ: 0 ANSI: 5 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: unexpected _GTF length (8) ata2.00: ATAPI: MATSHITADVD-RAM UJ892AS, 1.21, max UDMA/100 ata2.00: unexpected _GTF length (8) ata2.00: configured for UDMA/100 scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ892AS 1.21 PQ: 0 ANSI: 5 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata3.00: ATA-8: TOSHIBA THNS064GG2BNAA, AGSA0203, max UDMA/100 ata3.00: 125045424 sectors, multi 16: LBA48 ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata3.00: configured for UDMA/100 scsi 2:0:0:0: Direct-Access ATA TOSHIBA THNS064G AGSA PQ: 0 ANSI: 5 ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 unknown partition table sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sd 2:0:0:0: [sdb] Attached SCSI disk sda1 sda2 sda3 sda4 < > sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs udev[1027]: starting version 164 ACPI: acpi_idle registered with cpuidle Monitor-Mwait will be used to enter C-1 state agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset agpgart-intel 0000:00:00.0: detected 131068K stolen memory, trimming to 32768K Monitor-Mwait will be used to enter C-2 state iTCO_vendor_support: vendor-support=0 input: PC Speaker as /devices/platform/pcspkr/input/input1 e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4 e1000e: Copyright (c) 1999 - 2009 Intel Corporation. sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 sd 2:0:0:0: Attached scsi generic sg2 type 0 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub Monitor-Mwait will be used to enter C-3 state iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 iTCO_wdt: unable to reset NO_REBOOT flag, platform may have disabled it input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 ACPI: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 ACPI: Power Button [PWRB] cfg80211: Calling CRDA to update world regulatory domain usbcore: registered new device driver usb sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 0) sdhci-pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:03:00.0: setting latency timer to 64 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA sdhci-pci 0000:03:00.4: SDHCI controller found [1180:e822] (rev 0) sdhci-pci 0000:03:00.4: PCI INT C -> GSI 19 (level, low) -> IRQ 19 sdhci-pci 0000:03:00.4: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:03:00.4: setting latency timer to 64 Registered led device: mmc1:: mmc1: SDHCI controller on PCI [0000:03:00.4] using DMA ACPI: WMI: Mapper loaded ACPI: Battery Slot [BAT1] (battery present) ACPI: AC Adapter [ADP1] (on-line) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [DTS0] (61 C) sony-laptop: Sony Notebook Control Driver v0.6. iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: iwlagn: Copyright(c) 2003-2010 Intel Corporation iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 iwlagn 0000:02:00.0: setting latency timer to 64 iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74 input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/SNY5001:00/input/input4 input: Sony Vaio Jogdial as /devices/virtual/input/input5 sony-laptop: brightness ignored, must be controlled by ACPI video driver iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xa0000000 e1000e 0000:00:19.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 44 for MSI/MSI-X iwlagn 0000:02:00.0: irq 45 for MSI/MSI-X mmc1: new SD card at address 37ff iwlagn 0000:02:00.0: loaded firmware version 9.193.4.1 build 19710 mmcblk0: mmc1:37ff SD128 120 MiB mmcblk0: p1 phy0: Selected rate control algorithm 'iwl-agn-rs' [drm] Initialized drm 1.1.0 20060810 e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:be:d6:d8:7b e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: ffffff-0ff i801_smbus 0000:00:1f.3: PCI INT B -> GSI 22 (level, low) -> IRQ 22 ACPI: resource 0000:00:1f.3 [io 0x6000-0x601f] conflicts with ACPI region SMBI [io 0x6000-0x600f 64bit pref disabled] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: irq 23, io mem 0xb6427c00 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: irq 20, io mem 0xb6427800 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: ALC889: SKU not ready 0x411111f0 hda_codec: ALC889: BIOS auto-probing. input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 i915 0000:00:02.0: power state changed by ACPI to D0 i915 0000:00:02.0: power state changed by ACPI to D0 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 mtrr: no more MTRRs available [drm] MTRR allocation failed. Graphics performance may suffer. [drm] detected 127M stolen memory, trimming to 32M i915 0000:00:02.0: irq 47 for MSI/MSI-X [drm] set up 32M of stolen space usb 1-1: new high speed USB device using ehci_hcd and address 2 Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000 Console: switching to colour frame buffer device 240x67 fb0: inteldrmfb frame buffer device drm: registered panic notifier Slow work thread pool: Starting up Slow work thread pool: Ready acpi device:00: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8 hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected EXT4-fs (dm-5): re-mounted. Opts: discard usb 2-1: new high speed USB device using ehci_hcd and address 2 EXT4-fs (dm-5): re-mounted. Opts: discard hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected usb 1-1.1: new full speed USB device using ehci_hcd and address 3 usb 1-1.2: new high speed USB device using ehci_hcd and address 4 Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device (05ca:18b7) input: UVC Camera (05ca:18b7) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input9 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) usb 1-1.6: new full speed USB device using ehci_hcd and address 5 Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. WARNING! power/level is deprecated; use power/control instead usb 1-1.6: USB disconnect, address 5 e1000e 0000:00:19.0: irq 44 for MSI/MSI-X e1000e 0000:00:19.0: irq 44 for MSI/MSI-X NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): wlan0: link is not ready ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): wlan0: link is not ready e1000e 0000:00:19.0: irq 44 for MSI/MSI-X e1000e 0000:00:19.0: irq 44 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): wlan0: link is not ready lo: Disabled Privacy Extensions wlan0: authenticate with 00:1f:90:d6:9b:ec (try 1) wlan0: authenticated wlan0: associate with 00:1f:90:d6:9b:ec (try 1) wlan0: RX AssocResp from 00:1f:90:d6:9b:ec (capab=0x431 status=0 aid=3) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready cfg80211: Calling CRDA for country: US wlan0: no IPv6 routers present