Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.35-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Sat Oct 30 21:22:26 CEST 2010 Command line: root=/dev/sda1 resume=/dev/sda4 ro quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d000 (usable) BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000009b63f000 (usable) BIOS-e820: 000000009b63f000 - 000000009b6bf000 (reserved) BIOS-e820: 000000009b6bf000 - 000000009b7bf000 (ACPI NVS) BIOS-e820: 000000009b7bf000 - 000000009b7ff000 (ACPI data) BIOS-e820: 000000009b7ff000 - 000000009b800000 (usable) BIOS-e820: 000000009b800000 - 00000000a0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000158000000 (usable) Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! DMI 2.6 present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x158000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-EFFFF write-through F0000-FFFFF write-combining MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 0FFE00000 mask FFFE00000 write-protect 2 base 080000000 mask FE0000000 write-back 3 base 09C000000 mask FFC000000 uncachable 4 base 09B800000 mask FFF800000 uncachable 5 base 100000000 mask F80000000 write-back 6 base 158000000 mask FF8000000 uncachable 7 base 160000000 mask FE0000000 uncachable x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0x9b800 max_arch_pfn = 0x400000000 e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009d000 (usable) modified: 000000000009d000 - 00000000000a0000 (reserved) modified: 00000000000e0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000009b63f000 (usable) modified: 000000009b63f000 - 000000009b6bf000 (reserved) modified: 000000009b6bf000 - 000000009b7bf000 (ACPI NVS) modified: 000000009b7bf000 - 000000009b7ff000 (ACPI data) modified: 000000009b7ff000 - 000000009b800000 (usable) modified: 000000009b800000 - 00000000a0000000 (reserved) modified: 00000000e0000000 - 00000000f0000000 (reserved) modified: 00000000feb00000 - 00000000feb04000 (reserved) modified: 00000000fec00000 - 00000000fec01000 (reserved) modified: 00000000fed10000 - 00000000fed14000 (reserved) modified: 00000000fed18000 - 00000000fed1a000 (reserved) modified: 00000000fed1b000 - 00000000fed20000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ffe00000 - 0000000100000000 (reserved) modified: 0000000100000000 - 0000000158000000 (usable) initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000009b800000 0000000000 - 009b800000 page 2M kernel direct mapping tables up to 9b800000 @ 16000-1a000 init_memory_mapping: 0000000100000000-0000000158000000 0100000000 - 0158000000 page 2M kernel direct mapping tables up to 158000000 @ 18000-1f000 RAMDISK: 37d6c000 - 37ff0000 ACPI: RSDP 00000000000fe020 00024 (v02 HP ) ACPI: XSDT 000000009b7fe120 0009C (v01 HPQOEM SLIC-MPC 00000001 01000013) ACPI: FACP 000000009b7fb000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013) ACPI: DSDT 000000009b7e9000 0E9EE (v02 HP SLIC-MPC 00000001 MSFT 01000013) ACPI: FACS 000000009b75f000 00040 ACPI: DMAR 000000009b7fd000 000B8 (v01 INTEL CP_DALE 00000001 INTL 00000001) ACPI: ASF! 000000009b7fc000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: HPET 000000009b7fa000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: APIC 000000009b7f9000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: MCFG 000000009b7f8000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: SSDT 000000009b7e6000 01152 (v01 TrmRef PtidDevc 00001000 INTL 20051117) ACPI: SSDT 000000009b7e5000 00172 (v01 VaRef Va_Acpi 00003000 INTL 20051117) ACPI: BOOT 000000009b7e4000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: SSDT 000000009b7e3000 00C39 (v01 INTEL SataPri 00001000 INTL 20051117) ACPI: SSDT 000000009b7e2000 006C5 (v01 INTEL SataSec 00001000 INTL 20051117) ACPI: ASPT 000000009b7e1000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: SSDT 000000009b7e0000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117) ACPI: SSDT 000000009b7de000 01A22 (v01 AmdRef AmdTabl 00001000 INTL 20051117) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00158000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000010 -> 0x0000009d 0: 0x00000100 -> 0x0009b63f 0: 0x0009b7ff -> 0x0009b800 0: 0x00100000 -> 0x00158000 On node 0 totalpages: 996813 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3925 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 618104 pages, LIFO batch:31 Normal zone: 4928 pages used for memmap Normal zone: 355520 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 8 CPUs, 4 hotplug CPUs nr_irqs_gsi: 40 early_res array is doubled to 64 at [1a200 - 1a9ff] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 000000009b63f000 - 000000009b6bf000 PM: Registered nosave memory: 000000009b6bf000 - 000000009b7bf000 PM: Registered nosave memory: 000000009b7bf000 - 000000009b7ff000 PM: Registered nosave memory: 000000009b800000 - 00000000a0000000 PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000 PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000 PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000 PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 Allocating PCI resources starting at a0000000 (gap: a0000000:40000000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88832 r8192 d21760 u262144 early_res array is doubled to 128 at [1aa00 - 1b9ff] pcpu-alloc: s88832 r8192 d21760 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 977549 Kernel command line: root=/dev/sda1 resume=/dev/sda4 ro quiet PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Subtract (66 early reservations) #1 [0001000000 - 00016f9598] TEXT DATA BSS #2 [0037d6c000 - 0037ff0000] RAMDISK #3 [000009d000 - 0000100000] BIOS reserved #4 [00016fa000 - 00016fa2e2] BRK #5 [0000010000 - 0000012000] TRAMPOLINE #6 [0000012000 - 0000016000] ACPI WAKEUP #7 [0000016000 - 0000018000] PGTABLE #8 [0000018000 - 000001a000] PGTABLE #9 [00016fa300 - 00016fb300] BOOTMEM #10 [000001a000 - 000001a1f0] BOOTMEM #11 [0001efc000 - 0001efd000] BOOTMEM #12 [0001efd000 - 0001efe000] BOOTMEM #13 [0002000000 - 0005800000] MEMMAP 0 #14 [00016fb300 - 0001713300] BOOTMEM #15 [0001713300 - 000172b300] BOOTMEM #16 [000172b300 - 0001743300] BOOTMEM #17 [0001744000 - 0001745000] BOOTMEM #18 [00016f95c0 - 00016f9601] BOOTMEM #19 [00016f9640 - 00016f9683] BOOTMEM #20 [00016f96c0 - 00016f9ae8] BOOTMEM #21 [00016f9b00 - 00016f9b68] BOOTMEM #22 [00016f9b80 - 00016f9be8] BOOTMEM #23 [00016f9c00 - 00016f9c68] BOOTMEM #24 [00016f9c80 - 00016f9ce8] BOOTMEM #25 [00016f9d00 - 00016f9d68] BOOTMEM #26 [00016f9d80 - 00016f9de8] BOOTMEM #27 [00016f9e00 - 00016f9e68] BOOTMEM #28 [00016f9e80 - 00016f9ee8] BOOTMEM #29 [00016f9f00 - 00016f9f68] BOOTMEM #30 [00016f9f80 - 00016f9fe8] BOOTMEM #31 [0001743300 - 0001743368] BOOTMEM #32 [0001743380 - 00017433e8] BOOTMEM #33 [0001743400 - 0001743468] BOOTMEM #34 [0001743480 - 00017434e8] BOOTMEM #35 [0001743500 - 0001743568] BOOTMEM #36 [0001743580 - 00017435e8] BOOTMEM #37 [0001743600 - 0001743668] BOOTMEM #38 [0001743680 - 00017436e8] BOOTMEM #39 [0001743700 - 0001743720] BOOTMEM #40 [0001743740 - 0001743760] BOOTMEM #41 [0001743780 - 00017437a0] BOOTMEM #42 [00017437c0 - 00017437e9] BOOTMEM #43 [0001743800 - 0001743829] BOOTMEM #44 [0001800000 - 000181d000] BOOTMEM #45 [0001840000 - 000185d000] BOOTMEM #46 [0001880000 - 000189d000] BOOTMEM #47 [00018c0000 - 00018dd000] BOOTMEM #48 [0001900000 - 000191d000] BOOTMEM #49 [0001940000 - 000195d000] BOOTMEM #50 [0001980000 - 000199d000] BOOTMEM #51 [00019c0000 - 00019dd000] BOOTMEM #52 [0001743840 - 0001743848] BOOTMEM #53 [0001743880 - 0001743888] BOOTMEM #54 [00017438c0 - 00017438e0] BOOTMEM #55 [0001743900 - 0001743940] BOOTMEM #56 [0001743940 - 0001743a60] BOOTMEM #57 [0001743a80 - 0001743ac8] BOOTMEM #58 [0001743b00 - 0001743b48] BOOTMEM #59 [0001745000 - 000174d000] BOOTMEM #60 [00019dd000 - 0001ddd000] BOOTMEM #61 [0005800000 - 0005a00000] BOOTMEM #62 [0005a00000 - 0009a00000] BOOTMEM #63 [000174d000 - 000176d000] BOOTMEM #64 [000176d000 - 00017ad000] BOOTMEM #65 [000001ba00 - 0000023a00] BOOTMEM Memory: 3846776k/5636096k available (3545k kernel code, 1648844k absent, 140476k reserved, 1831k data, 488k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:768 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled allocated 40632320 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT Detected 2526.974 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5055.52 BogoMIPS (lpj=8423246) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 9 MCE banks CPU0: Thermal monitoring handled by SMI using mwait in idle threads. Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f ACPI: Core revision 20100428 DMAR: Host address width 36 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000 DMAR: DRHD base: 0x000000fed91000 flags: 0x0 IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c0000020230272 ecap 1000 DMAR: DRHD base: 0x000000fed93000 flags: 0x1 IOMMU 2: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000 DMAR: RMRR base: 0x00000099b61000 end: 0x00000099b81fff DMAR: RMRR base: 0x0000009de00000 end: 0x0000009fffffff DMAR: No ATSR found Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz stepping 05 Booting Node 0, Processors #1 CPU1: Thermal monitoring handled by SMI #2 CPU2: Thermal monitoring handled by SMI #3 CPU3: Thermal monitoring handled by SMI Brought up 4 CPUs Total of 4 processors activated (20223.17 BogoMIPS). devtmpfs: initialized NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 000000009b691a18 004C7 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 004C7 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: SSDT 000000009b68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) ACPI: SSDT 000000009b690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117) ACPI: SSDT 000000009b68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: Power Resource [FN00] (on) ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 8 1f ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfeafffff] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0x4050-0x4057] pci 0000:00:16.0: reg 10: [mem 0xc4506100-0xc450610f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:16.0: PME# disabled pci 0000:00:1a.0: reg 10: [mem 0xc4505c00-0xc4505fff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xc4500000-0xc4503fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: reg 10: [mem 0xc4505800-0xc4505bff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1f.2: reg 10: [io 0x4048-0x404f] pci 0000:00:1f.2: reg 14: [io 0x405c-0x405f] pci 0000:00:1f.2: reg 18: [io 0x4040-0x4047] pci 0000:00:1f.2: reg 1c: [io 0x4058-0x405b] pci 0000:00:1f.2: reg 20: [io 0x4020-0x403f] pci 0000:00:1f.2: reg 24: [mem 0xc4505000-0xc45057ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10: [mem 0xc4506000-0xc45060ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f] pci 0000:00:1f.6: reg 10: [mem 0xc4504000-0xc4504fff 64bit] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xc4400000-0xc441ffff 64bit] pci 0000:01:00.0: reg 20: [io 0x3000-0x30ff] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10: [mem 0xc4420000-0xc4423fff 64bit] pci 0000:01:00.1: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff] pci 0000:02:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref] pci 0000:02:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref] pci 0000:03:00.0: reg 10: [mem 0xc2400000-0xc2403fff 64bit] pci 0000:03:00.0: supports D1 D2 pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 19 1f ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff]) pci_bus 0000:ff: on NUMA node 0 ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. HEST: Table is not found! vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009d000 - 000000000009ffff reserve RAM buffer: 000000009b63f000 - 000000009bffffff reserve RAM buffer: 000000009b800000 - 000000009bffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:05: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 13 [io 0x1000-0x1fff] pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:05: [io 0x0680-0x069f] has been reserved system 00:05: [io 0x0800-0x080f] has been reserved system 00:05: [io 0x0810-0x0813] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0x0400-0x047f] has been reserved system 00:05: [io 0x0500-0x0501] has been reserved system 00:05: [io 0x0700-0x077f] has been reserved system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:0a: [mem 0xc4600000-0xc4600fff] has been reserved pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 04-04] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS 64 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 2576k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000 software IO TLB at phys 0x5a00000 - 0x9a00000 Simple Boot Flag at 0x44 set to 0x1 Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1291067507.979:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7518 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:01.0: irq 40 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X ERST: Table is not found! Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 PM: Checking image partition /dev/sda4 PM: Resume from disk failed. registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 488k freed udev[52]: starting version 164 agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset agpgart-intel 0000:00:00.0: detected 32764K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 mtrr: no more MTRRs available [drm] MTRR allocation failed. Graphics performance may suffer. i915 0000:00:02.0: irq 43 for MSI/MSI-X [drm] set up 31M of stolen space Console: switching to colour frame buffer device 170x48 fb0: inteldrmfb frame buffer device drm: registered panic notifier Slow work thread pool: Starting up Slow work thread pool: Ready [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function acpi device:01: registered as cooling_device0 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS acpi device:0a: registered as cooling_device1 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/LNXVIDEO:01/input/input5 ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle radeon 0000:01:00.0: enabling device (0000 -> 0003) radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 radeon 0000:01:00.0: setting latency timer to 64 [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0). [drm] register mmio base: 0xC4400000 [drm] register mmio size: 131072 vga_switcheroo: enabled radeon atpx: version is 1 ATOM BIOS: HP [drm] Clocks initialized ! radeon 0000:01:00.0: VRAM: 512M 0x00000000 - 0x1FFFFFFF (256M used) radeon 0000:01:00.0: GTT: 512M 0x20000000 - 0x3FFFFFFF mtrr: no more MTRRs available [drm] Detected VRAM RAM=512M, BAR=256M [drm] RAM width 64bits DDR [TTM] Zone kernel: Available graphics memory: 1924920 kiB. [TTM] Initializing pool allocator. [drm] radeon: 256M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:01:00.0: irq 44 for MSI/MSI-X radeon 0000:01:00.0: radeon: using MSI. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] Loading CEDAR Microcode [drm] ring test succeeded in 1 usecs [drm] radeon: ib pool ready. [drm] ib test succeeded in 0 usecs [drm] Radeon Display Connectors [drm] Connector 0: [drm] LVDS [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [drm] Encoders: [drm] LCD1: INTERNAL_UNIPHY [drm] Connector 1: [drm] HDMI-A [drm] HPD1 [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY1 [drm] Connector 2: [drm] VGA [drm] DDC: no ddc bus - possible BIOS bug - please report to xorg-driver-ati@lists.x.org [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] Internal thermal controller with fan control [drm] radeon: power management initialized [drm] fb mappable at 0xA0140000 [drm] vram apper at 0xA0000000 [drm] size 4325376 [drm] fb depth is 24 [drm] pitch is 5632 fb1: radeondrmfb frame buffer device [drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 1 SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 45 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci ata1: SATA max UDMA/133 abar m2048@0xc4505000 port 0xc4505100 irq 45 ata2: SATA max UDMA/133 abar m2048@0xc4505000 port 0xc4505180 irq 45 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xc4505000 port 0xc4505300 irq 45 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata1.00: ATA-8: ST9640320AS, 0001HPM1, max UDMA/100 ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata2.00: ATAPI: hp CDDVDW TS-U633F, HH05, max UDMA/100 ata2.00: configured for UDMA/100 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST9640320AS 0001 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM hp CDDVDW TS-U633F HH05 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc4505c00 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc4505800 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected usb 1-1: new high speed USB device using ehci_hcd and address 2 hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected usb 2-1: new high speed USB device using ehci_hcd and address 2 hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected usb 1-1.1: new low speed USB device using ehci_hcd and address 3 usb 1-1.4: new full speed USB device using ehci_hcd and address 4 PM: Starting manual resume from disk PM: Resume from partition 8:4 PM: Checking hibernation image. PM: Error -22 checking image file PM: Resume from disk failed. EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) usb 2-1.6: new full speed USB device using ehci_hcd and address 3 usb 2-1.6: new high speed USB device using ehci_hcd and address 4 rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs udev[1346]: starting version 164 fuse init (API version 7.14) sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 r8169 0000:02:00.0: setting latency timer to 64 r8169 0000:02:00.0: irq 46 for MSI/MSI-X r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc900100be000, 1c:c1:de:ad:3e:67, XID 083000c0 IRQ 46 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ACPI: resource 0000:00:1f.3 [io 0x4000-0x401f] conflicts with ACPI region SMBI [mem 0x00004000-0x0000400f 64bit disabled] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device HP Webcam (10f1:1a28) usbcore: registered new interface driver hiddev input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input6 generic-usb 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input7 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xe40000/0x5a0400 vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Successfully done. vboxdrv: Found 4 processor cores. VBoxDrv: dbg - g_abExecMemory=ffffffffa03d9560 vboxdrv: fAsync=0 offMin=0x139 offMax=0x20b6 vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 3.2.10 (interface 0x00140001). input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 ACPI: acpi_idle registered with cpuidle Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-3 state ACPI: WMI: Mapper loaded thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (51 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZ01] (40 C) thermal LNXTHERM:03: registered as thermal_zone2 ACPI: Thermal Zone [TZ02] (56 C) ACPI Error (psargs-0359): [NPSS] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880157c7aaa0), AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880157c7a9c0), AE_NOT_FOUND ACPI Error (psargs-0359): [NPSS] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880157c7aaa0), AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880157c7a9c0), AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PPC] (Node ffff880157c7aa80), AE_NOT_FOUND ACPI Error (psargs-0359): [NPSS] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880157c7aaa0), AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880157c7a9c0), AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PPC] (Node ffff880157c7ac60), AE_NOT_FOUND ACPI Error (psargs-0359): [NPSS] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff880157c7aaa0), AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff880157c7a9c0), AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU3._PPC] (Node ffff880157c7abe0), AE_NOT_FOUND ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) lis3lv02d: laptop model unknown, using default axes configuration lis3lv02d: 8 bits sensor found HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 ACPI: Fan [FAN0] (on) input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9 Registered led device: hp::hddprotect lis3lv02d driver loaded. input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' lib80211_crypt: registered algorithm 'TKIP' input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:01:00.1: irq 48 for MSI/MSI-X HDA Intel 0000:01:00.1: setting latency timer to 64 input: HP WMI hotkeys as /devices/virtual/input/input13 EXT4-fs (sda1): re-mounted. Opts: (null) EXT4-fs (sda1): re-mounted. Opts: (null) EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) Adding 16954364k swap on /dev/sda4. Priority:-1 extents:1 across:16954364k