Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 00:39:57 CET 2010 Command line: root=/dev/disk/by-uuid/55f7635d-72c1-49d2-90ca-2518d8b0059f ro verbose BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ac00 (usable) BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000db65f000 (usable) BIOS-e820: 00000000db65f000 - 00000000db67f000 (ACPI data) BIOS-e820: 00000000db67f000 - 00000000db76f000 (ACPI NVS) BIOS-e820: 00000000db76f000 - 00000000dc000000 (reserved) BIOS-e820: 00000000ddc00000 - 00000000e0000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000011c000000 (usable) NX (Execute Disable) protection: active DMI 2.6 present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x11c000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 0C0000000 mask FE0000000 write-back 3 base 0DC000000 mask FFC000000 uncachable 4 base 100000000 mask FE0000000 write-back 5 base 11C000000 mask FFC000000 uncachable 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000dc000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xdb65f max_arch_pfn = 0x400000000 e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009ac00 (usable) modified: 000000000009ac00 - 00000000000a0000 (reserved) modified: 00000000000e0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000db65f000 (usable) modified: 00000000db65f000 - 00000000db67f000 (ACPI data) modified: 00000000db67f000 - 00000000db76f000 (ACPI NVS) modified: 00000000db76f000 - 00000000dc000000 (reserved) modified: 00000000ddc00000 - 00000000e0000000 (reserved) modified: 00000000f8000000 - 00000000fc000000 (reserved) modified: 00000000fec00000 - 00000000fec01000 (reserved) modified: 00000000fed10000 - 00000000fed14000 (reserved) modified: 00000000fed18000 - 00000000fed1a000 (reserved) modified: 00000000fed1c000 - 00000000fed20000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ff800000 - 0000000100000000 (reserved) modified: 0000000100000000 - 000000011c000000 (usable) initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000f2260] f2260 init_memory_mapping: 0000000000000000-00000000db65f000 0000000000 - 00db600000 page 2M 00db600000 - 00db65f000 page 4k kernel direct mapping tables up to db65f000 @ 16000-1c000 init_memory_mapping: 0000000100000000-000000011c000000 0100000000 - 011c000000 page 2M kernel direct mapping tables up to 11c000000 @ 1a000-20000 RAMDISK: 37e53000 - 37ff0000 ACPI: RSDP 00000000000fe300 00024 (v02 DELL ) ACPI: XSDT 00000000db67de18 0006C (v01 DELL E2 06222004 MSFT 00010013) ACPI: FACP 00000000db75fc18 000F4 (v04 DELL E2 06222004 MSFT 00010013) ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100702/tbfadt-369) ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDB76BF40/0x00000000DB76ED40, using 32 (20100702/tbfadt-486) ACPI: DSDT 00000000db73e018 0A248 (v01 DELL E2 00001001 INTL 20080729) ACPI: FACS 00000000db76bf40 00040 ACPI: APIC 00000000db67cf18 0008C (v02 DELL E2 06222004 MSFT 00010013) ACPI: TCPA 00000000db76dd18 00032 (v02 00000000 00000000) ACPI: MCFG 00000000db76dc98 0003C (v01 A M I GMCH945. 06222004 MSFT 00000097) ACPI: HPET 00000000db76dc18 00038 (v01 DELL E2 00000001 ASL 00000061) ACPI: BOOT 00000000db76db98 00028 (v01 DELL E2 06222004 AMI 00010013) ACPI: SLIC 00000000db766818 00176 (v03 DELL E2 06222004 MSFT 00010013) ACPI: SSDT 00000000db74d018 009F1 (v01 PmRef CpuPm 00003000 INTL 20080729) ACPI: DMAR 00000000db75ff18 000B8 (v01 INTEL CP_DALE 00000001 INTL 00000001) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880002000000-ffff8800059fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0011c000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009a 0: 0x00000100 -> 0x000db65f 0: 0x00100000 -> 0x0011c000 On node 0 totalpages: 1013225 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3922 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 880279 pages, LIFO batch:31 Normal zone: 1568 pages used for memmap Normal zone: 113120 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 SMP: Allowing 8 CPUs, 4 hotplug CPUs nr_irqs_gsi: 40 early_res array is doubled to 64 at [1b300 - 1baff] PM: Registered nosave memory: 000000000009a000 - 000000000009b000 PM: Registered nosave memory: 000000000009b000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000db65f000 - 00000000db67f000 PM: Registered nosave memory: 00000000db67f000 - 00000000db76f000 PM: Registered nosave memory: 00000000db76f000 - 00000000dc000000 PM: Registered nosave memory: 00000000dc000000 - 00000000ddc00000 PM: Registered nosave memory: 00000000ddc00000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000 PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 28 pages/cpu @ffff880001a00000 s86016 r8192 d20480 u262144 early_res array is doubled to 128 at [1bb00 - 1caff] pcpu-alloc: s86016 r8192 d20480 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 997321 Kernel command line: root=/dev/disk/by-uuid/55f7635d-72c1-49d2-90ca-2518d8b0059f ro verbose PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Subtract (66 early reservations) #1 [0001000000 - 00017f99a8] TEXT DATA BSS #2 [0037e53000 - 0037ff0000] RAMDISK #3 [00017fa000 - 00017fa251] BRK #4 [000009ac00 - 00000f2260] BIOS reserved #5 [00000f2260 - 00000f2270] MP-table mpf #6 [00000f2410 - 0000100000] BIOS reserved #7 [00000f2270 - 00000f2410] MP-table mpc #8 [0000010000 - 0000012000] TRAMPOLINE #9 [0000012000 - 0000016000] ACPI WAKEUP #10 [0000016000 - 000001a000] PGTABLE #11 [000001a000 - 000001b000] PGTABLE #12 [00017fa280 - 00017fb280] BOOTMEM #13 [000001b000 - 000001b300] BOOTMEM #14 [0001ffc000 - 0001ffd000] BOOTMEM #15 [0001ffd000 - 0001ffe000] BOOTMEM #16 [0002000000 - 0005a00000] MEMMAP 0 #17 [00017fb280 - 0001813280] BOOTMEM #18 [0001813280 - 000182b280] BOOTMEM #19 [000182b280 - 0001843280] BOOTMEM #20 [0001844000 - 0001845000] BOOTMEM #21 [00017f99c0 - 00017f9a01] BOOTMEM #22 [00017f9a40 - 00017f9a83] BOOTMEM #23 [00017f9ac0 - 00017f9e78] BOOTMEM #24 [00017f9e80 - 00017f9ee8] BOOTMEM #25 [00017f9f00 - 00017f9f68] BOOTMEM #26 [00017f9f80 - 00017f9fe8] BOOTMEM #27 [0001843280 - 00018432e8] BOOTMEM #28 [0001843300 - 0001843368] BOOTMEM #29 [0001843380 - 00018433e8] BOOTMEM #30 [0001843400 - 0001843468] BOOTMEM #31 [0001843480 - 00018434e8] BOOTMEM #32 [0001843500 - 0001843568] BOOTMEM #33 [0001843580 - 00018435e8] BOOTMEM #34 [0001843600 - 0001843668] BOOTMEM #35 [0001843680 - 00018436e8] BOOTMEM #36 [0001843700 - 0001843768] BOOTMEM #37 [0001843780 - 00018437e8] BOOTMEM #38 [0001843800 - 0001843868] BOOTMEM #39 [0001843880 - 00018438e8] BOOTMEM #40 [0001843900 - 0001843920] BOOTMEM #41 [0001843940 - 0001843960] BOOTMEM #42 [0001843980 - 00018439c7] BOOTMEM #43 [0001843a00 - 0001843a47] BOOTMEM #44 [0001a00000 - 0001a1c000] BOOTMEM #45 [0001a40000 - 0001a5c000] BOOTMEM #46 [0001a80000 - 0001a9c000] BOOTMEM #47 [0001ac0000 - 0001adc000] BOOTMEM #48 [0001b00000 - 0001b1c000] BOOTMEM #49 [0001b40000 - 0001b5c000] BOOTMEM #50 [0001b80000 - 0001b9c000] BOOTMEM #51 [0001bc0000 - 0001bdc000] BOOTMEM #52 [0001843a80 - 0001843a88] BOOTMEM #53 [0001843ac0 - 0001843ac8] BOOTMEM #54 [0001843b00 - 0001843b20] BOOTMEM #55 [0001843b40 - 0001843b80] BOOTMEM #56 [0001843b80 - 0001843ca0] BOOTMEM #57 [0001843cc0 - 0001843d08] BOOTMEM #58 [0001843d40 - 0001843d88] BOOTMEM #59 [0001845000 - 000184d000] BOOTMEM #60 [0001bdc000 - 0001fdc000] BOOTMEM #61 [0005a00000 - 0005c00000] BOOTMEM #62 [0005c00000 - 0009c00000] BOOTMEM #63 [000184d000 - 000186d000] BOOTMEM #64 [000186d000 - 00018ad000] BOOTMEM #65 [000001cb00 - 0000024b00] BOOTMEM Memory: 3910304k/4653056k available (3682k kernel code, 600156k absent, 142596k reserved, 2083k data, 504k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:2304 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled allocated 41943040 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT spurious 8259A interrupt: IRQ7. Detected 2394.545 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.63 BogoMIPS (lpj=7981816) pid_max: default: 32768 minimum: 301 Security Framework initialized TOMOYO Linux initialized AppArmor: AppArmor disabled by boot time parameter Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 9 MCE banks CPU0: Thermal monitoring handled by SMI using mwait in idle threads. Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f ACPI: Core revision 20100702 DMAR: Host address width 36 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000 DMAR: DRHD base: 0x000000fed91000 flags: 0x0 IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c0000020230272 ecap 1000 DMAR: DRHD base: 0x000000fed93000 flags: 0x1 IOMMU 2: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000 DMAR: RMRR base: 0x000000db7d7000 end: 0x000000db7e6fff DMAR: RMRR base: 0x000000ddc00000 end: 0x000000dfffffff DMAR: No ATSR found Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 CPU0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz stepping 02 NMI watchdog enabled, takes one hw-pmu counter. Booting Node 0, Processors #1 CPU1: Thermal monitoring handled by SMI NMI watchdog enabled, takes one hw-pmu counter. #2 CPU2: Thermal monitoring handled by SMI NMI watchdog enabled, takes one hw-pmu counter. #3 CPU3: Thermal monitoring handled by SMI NMI watchdog enabled, takes one hw-pmu counter. Brought up 4 CPUs Total of 4 processors activated (19160.05 BogoMIPS). devtmpfs: initialized NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 00000000db7ea918 003F0 (v01 PmRef Cpu0Ist 00003000 INTL 20080729) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 003F0 (v01 PmRef Cpu0Ist 00003000 INTL 20080729) ACPI: SSDT 00000000db7e8018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20080729) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20080729) ACPI: SSDT 00000000db7e9a98 00303 (v01 PmRef ApIst 00003000 INTL 20080729) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20080729) ACPI: SSDT 00000000db7e7d98 00119 (v01 PmRef ApCst 00003000 INTL 20080729) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20080729) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930 ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 8 1f ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0x60b0-0x60b7] pci 0000:00:19.0: reg 10: [mem 0xf5500000-0xf551ffff] pci 0000:00:19.0: reg 14: [mem 0xf5580000-0xf5580fff] pci 0000:00:19.0: reg 18: [io 0x6040-0x605f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 10: [mem 0xf5570000-0xf55703ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1b.0: reg 10: [mem 0xf5560000-0xf5563fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 10: [mem 0xf5550000-0xf55503ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1f.2: reg 10: [io 0x6090-0x6097] pci 0000:00:1f.2: reg 14: [io 0x6080-0x6083] pci 0000:00:1f.2: reg 18: [io 0x6070-0x6077] pci 0000:00:1f.2: reg 1c: [io 0x6060-0x6063] pci 0000:00:1f.2: reg 20: [io 0x6020-0x603f] pci 0000:00:1f.2: reg 24: [mem 0xf5540000-0xf55407ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10: [mem 0xf5530000-0xf55300ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x6000-0x601f] pci 0000:00:1f.6: reg 10: [mem 0xf5520000-0xf5520fff 64bit] pci 0000:01:00.0: reg 10: [mem 0xf4100000-0xf410ffff 64bit] pci 0000:01:00.0: supports D1 pci 0000:01:00.0: PME# supported from D0 D1 D3hot pci 0000:01:00.0: PME# disabled pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.0: bridge window [mem 0xf4100000-0xf54fffff] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:02:00.0: reg 10: [mem 0xf2c40000-0xf2c40fff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:00.1: reg 10: [mem 0xf2c30000-0xf2c300ff] pci 0000:02:00.1: supports D1 D2 pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.1: PME# disabled pci 0000:02:00.4: reg 10: [mem 0xf2c00000-0xf2c007ff] pci 0000:02:00.4: supports D1 D2 pci 0000:02:00.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.4: PME# disabled pci 0000:00:1c.2: PCI bridge to [bus 02-03] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf2cfffff] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci_bus 0000:03: [bus 03-06] partially hidden behind bridge 0000:02 [bus 02-03] pci 0000:00:1c.3: PCI bridge to [bus 04-09] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: bridge window [mem 0xf2d00000-0xf40fffff] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 19 1f ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f]) pci_bus 0000:3f: on NUMA node 0 ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. HEST: Table is not found! vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009ac00 - 000000000009ffff reserve RAM buffer: 00000000db65f000 - 00000000dbffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:05: [io 0x0680-0x069f] has been reserved system 00:05: [io 0x1000-0x1003] has been reserved system 00:05: [io 0x1004-0x1013] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0x0400-0x047f] has been reserved system 00:05: [io 0x0500-0x057f] has been reserved system 00:05: [io 0x164e-0x164f] has been reserved system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:0a: [mem 0xf55c0000-0xf55c0fff] has been reserved pci 0000:00:1c.2: BAR 15: can't assign mem pref (size 0x4000000) pci 0000:00:1c.0: BAR 15: assigned [mem 0xf5600000-0xf57fffff 64bit pref] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf5800000-0xf59fffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.0: bridge window [mem 0xf4100000-0xf54fffff] pci 0000:00:1c.0: bridge window [mem 0xf5600000-0xf57fffff 64bit pref] pci 0000:02:00.0: BAR 15: can't assign mem pref (size 0x4000000) pci 0000:02:00.0: BAR 16: can't assign mem (size 0x4000000) pci 0000:02:00.0: BAR 13: assigned [io 0x2000-0x20ff] pci 0000:02:00.0: BAR 14: assigned [io 0x2400-0x24ff] pci 0000:02:00.0: CardBus bridge to [bus 03-06] pci 0000:02:00.0: bridge window [io 0x2000-0x20ff] pci 0000:02:00.0: bridge window [io 0x2400-0x24ff] pci 0000:00:1c.2: PCI bridge to [bus 02-03] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf2cfffff] pci 0000:00:1c.2: bridge window [mem pref disabled] pci 0000:00:1c.3: PCI bridge to [bus 04-09] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: bridge window [mem 0xf2d00000-0xf40fffff] pci 0000:00:1c.3: bridge window [mem 0xf5800000-0xf59fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:02:00.0: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] pci_bus 0000:01: resource 1 [mem 0xf4100000-0xf54fffff] pci_bus 0000:01: resource 2 [mem 0xf5600000-0xf57fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff] pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf2cfffff] pci_bus 0000:03: resource 0 [io 0x2000-0x20ff] pci_bus 0000:03: resource 1 [io 0x2400-0x24ff] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] pci_bus 0000:04: resource 1 [mem 0xf2d00000-0xf40fffff] pci_bus 0000:04: resource 2 [mem 0xf5800000-0xf59fffff 64bit pref] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:0a: resource 7 [mem 0xe0000000-0xfeafffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS 64 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 1652k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880005c00000 - ffff880009c00000 software IO TLB at phys 0x5c00000 - 0x9c00000 Simple Boot Flag at 0xf1 set to 0x1 Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1290941515.493:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7640 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1d \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1d \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 0 1d intel_idle: MWAIT substates: 0x1120 intel_idle: v0.4 model 0x25 intel_idle: lapic_timer_reliable_states 0xffffffff ERST: Table is not found! Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Warning: Keylock active. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 TCP cubic registered NET: Registered protocol family 17 Registering the dns_resolver key type PM: Resume from disk failed. registered taskstats version 1 rtc_cmos 00:06: setting system clock to 2010-11-28 10:51:55 UTC (1290941515) Initalizing network drop monitor service Freeing unused kernel memory: 504k freed udev[46]: starting version 164 SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ahci 0000:00:1f.2: irq 40 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf5540000 port 0xf5540100 irq 40 ata2: SATA max UDMA/133 abar m2048@0xf5540000 port 0xf5540180 irq 40 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xf5540000 port 0xf5540300 irq 40 ata6: SATA max UDMA/133 abar m2048@0xf5540000 port 0xf5540380 irq 40 ata6: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) ata1.00: ATA-8: WDC WD6400BEVT-00A0RT0, 01.01A01, max UDMA/133 ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) ata1.00: configured for UDMA/133 ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633F, D500, max UDMA/100 scsi 0:0:0:0: Direct-Access ATA WDC WD6400BEVT-0 01.0 PQ: 0 ANSI: 5 ata2.00: applying bridge limits ata2.00: configured for UDMA/100 scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633F D500 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist. udev[998]: starting version 164 agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset agpgart-intel 0000:00:00.0: detected 32764K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29) intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: WMI: Mapper loaded e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2 e1000e: Copyright (c) 1999 - 2010 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 41 for MSI/MSI-X input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 ACPI: Power Button [PBTN] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 ACPI: Sleep Button [SBTN] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 ACPI: Power Button [PWRF] ACPI: AC Adapter [AC] (on-line) dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 iTCO_vendor_support: vendor-support=0 parport_pc 00:08: activated parport_pc 00:08: reported by Plug and Play ACPI parport_pc 00:08: disabled ACPI: acpi_idle yielding to intel_idle ppdev: user-space parallel port driver e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:26:b9:e8:80:74 e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: 3041ff-0ff i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ACPI: resource 0000:00:1f.3 [io 0x6000-0x601f] conflicts with ACPI region SMBI [io 0x6000-0x600f window disabled] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) lp: driver loaded but no devices found input: PC Speaker as /devices/platform/pcspkr/input/input5 input: Dell WMI hotkeys as /devices/virtual/input/input6 firewire_ohci 0000:02:00.4: PCI INT C -> GSI 16 (level, low) -> IRQ 16 firewire_ohci 0000:02:00.4: setting latency timer to 64 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) firewire_ohci 0000:02:00.4: irq 42 for MSI/MSI-X firewire_ohci: Added fw-ohci device 0000:02:00.4, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1 cfg80211: Calling CRDA to update world regulatory domain yenta_cardbus 0000:02:00.0: CardBus bridge found [1028:040a] yenta_cardbus 0000:02:00.0: CardBus bridge to [bus 03-06] yenta_cardbus 0000:02:00.0: bridge window [io 0x2000-0x20ff] yenta_cardbus 0000:02:00.0: bridge window [io 0x2400-0x24ff] yenta_cardbus 0000:02:00.0: bridge window [mem 0xf0400000-0xf17fffff pref] yenta_cardbus 0000:02:00.0: bridge window [mem 0xf1800000-0xf1bfffff] [drm] Initialized drm 1.1.0 20060810 yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0000, PCI irq 18 yenta_cardbus 0000:02:00.0: Socket status: 30000006 pci_bus 0000:03: Upper limit for fixing this bridge's parent bridge: #03 yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [io 0x2000-0x3fff] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge window: [mem 0xf0400000-0xf2cfffff] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0400000-0xf2cfffff: excluding 0xf0400000-0xf1d9ffff 0xf2a70000-0xf2cfffff usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:02:00.1: SDHCI controller found [1180:e822] (rev 3) sdhci-pci 0000:02:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 mmc0: Unknown controller version (2). You may experience problems. sdhci-pci 0000:02:00.1: setting latency timer to 64 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:02:00.1] using DMA i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 i915 0000:00:02.0: irq 43 for MSI/MSI-X [drm] set up 31M of stolen space vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem dell-wmi: Received unknown WMI event (0x11) firewire_core: created device fw0: GUID 0146e661354fc000, S400 [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 198 [drm:drm_edid_block_valid] *ERROR* Raw EDID: <3>bf ff ff ff ff ff ff ff ff ff ff ff ff ff fb ff ................ <3>ff ff ff ff ff ff ff fe ff ff ff ff ff fe ff ff ................ <3>41 13 02 93 00 00 01 01 01 01 01 01 01 01 01 01 A............... <3>01 01 01 01 01 01 94 25 a0 3e 51 84 0c 30 40 20 .......%.>Q..0@ <3>33 00 2f bd 10 00 00 1a 0d 19 a0 3e 51 84 0c 30 3./........>Q..0 <3>40 20 33 00 2f bd 10 00 00 1a 00 00 00 fe 00 44 @ 3./..........D <3>56 35 4a 31 80 42 31 34 31 50 57 34 00 00 00 00 V5J1.B141PW4.... <3>00 00 41 21 1e 00 00 00 00 09 01 0a 20 20 00 d5 ..A!........ .. Console: switching to colour frame buffer device 180x56 fb0: inteldrmfb frame buffer device drm: registered panic notifier ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ath9k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ath9k 0000:01:00.0: setting latency timer to 64 ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20100702/evregion-474) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff88011bc33c08), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR2] (Node ffff88011bc33c30), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\ECRW] (Node ffff88011bc33d98), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\ECG1] (Node ffff88011bc33de8), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\NEVT] (Node ffff88011bc35168), AE_TIME ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV._Q66] (Node ffff88011bc33be0), AE_TIME ath: EEPROM regdomain: 0x65 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: 00 ath: Regpair used: 0x65 pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff acpi device:3c: registered as cooling_device4 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7 ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf5570000 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:1d.0: setting latency timer to 64 phy0: Selected rate control algorithm 'ath9k_rate_control' Registered led device: ath9k-phy0::radio Registered led device: ath9k-phy0::assoc Registered led device: ath9k-phy0::tx Registered led device: ath9k-phy0::rx phy0: Atheros AR9280 Rev:2 mem=0xffffc90004420000, irq=16 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: irq 17, io mem 0xf5550000 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 usb 1-1: new high speed USB device using ehci_hcd and address 2 hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected usb 2-1: new high speed USB device using ehci_hcd and address 2 hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected usb 2-1.1: new low speed USB device using ehci_hcd and address 3 usb 2-1.2: new low speed USB device using ehci_hcd and address 4 usbcore: registered new interface driver hiddev input: 2Axes 11Keys Game Pad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input10 generic-usb 0003:12BD:D015.0001: input,hidraw0: USB HID v1.10 Gamepad [2Axes 11Keys Game Pad] on usb-0000:00:1d.0-1.1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input11 generic-usb 0003:093A:2510.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0 input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 usb 2-1.3: new low speed USB device using ehci_hcd and address 5 EXT4-fs (sda3): re-mounted. Opts: (null) input: KB Multimedia keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input15 generic-usb 0003:05D5:0624.0003: input,hidraw2: USB HID v1.10 Keyboard [KB Multimedia keyboard ] on usb-0000:00:1d.0-1.3/input0 input: KB Multimedia keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input16 generic-usb 0003:05D5:0624.0004: input,hidraw3: USB HID v1.10 Device [KB Multimedia keyboard ] on usb-0000:00:1d.0-1.3/input1 usb 2-1.8: new full speed USB device using ehci_hcd and address 6 usb 2-1.8: config 0 descriptor?? EXT4-fs (sda3): re-mounted. Opts: (null) EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) Adding 5245216k swap on /dev/sda2. Priority:-1 extents:1 across:5245216k NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): wlan0: link is not ready RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period sshd (2143): /proc/2143/oom_adj is deprecated, please use /proc/2143/oom_score_adj instead. e1000e 0000:00:19.0: irq 41 for MSI/MSI-X e1000e 0000:00:19.0: irq 41 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ADDRCONF(NETDEV_UP): wlan0: link is not ready e1000e 0000:00:19.0: irq 41 for MSI/MSI-X e1000e 0000:00:19.0: irq 41 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready e1000e 0000:00:19.0: irq 41 for MSI/MSI-X e1000e 0000:00:19.0: irq 41 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present