Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-ARCH (tobias@T-POWA-LX) (gcc version 4.4.3 20100316 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Apr 4 10:27:30 CEST 2010
Command line: root=/dev/disk/by-uuid/2964677c-8fba-46a8-957a-f1fd578d9a51 ro nomodeset
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
 BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS)
 BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.2 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
No AGP bridge found
last_pfn = 0x5fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 0000000000 mask FFC0000000 write-back
  1 base 0040000000 mask FFE0000000 write-back
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 000000000009f800 (usable)
 modified: 000000000009f800 - 00000000000a0000 (reserved)
 modified: 00000000000f0000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 000000005fff0000 (usable)
 modified: 000000005fff0000 - 000000005fff3000 (ACPI NVS)
 modified: 000000005fff3000 - 0000000060000000 (ACPI data)
 modified: 00000000e0000000 - 00000000f0000000 (reserved)
 modified: 00000000fec00000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000f3bc0] f3bc0
init_memory_mapping: 0000000000000000-000000005fff0000
 0000000000 - 005fe00000 page 2M
 005fe00000 - 005fff0000 page 4k
kernel direct mapping tables up to 5fff0000 @ 16000-1a000
RAMDISK: 37e2c000 - 37fef8ac
ACPI: RSDP 00000000000f8020 00014 (v00 nVidia)
ACPI: RSDT 000000005fff3040 00030 (v01 nVidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 000000005fff30c0 00074 (v01 nVidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 000000005fff3180 05B77 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 000000005fff0000 00040
ACPI: MCFG 000000005fff8e00 0003C (v01 nVidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: APIC 000000005fff8d40 0007C (v01 nVidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
(12 early reservations) ==> bootmem [0000000000 - 005fff0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0001000000 - 00016d8958]    TEXT DATA BSS ==> [0001000000 - 00016d8958]
  #2 [0037e2c000 - 0037fef8ac]          RAMDISK ==> [0037e2c000 - 0037fef8ac]
  #3 [00016d9000 - 00016d907e]              BRK ==> [00016d9000 - 00016d907e]
  #4 [00000f3bd0 - 0000100000]    BIOS reserved ==> [00000f3bd0 - 0000100000]
  #5 [00000f3bc0 - 00000f3bd0]     MP-table mpf ==> [00000f3bc0 - 00000f3bd0]
  #6 [000009f800 - 00000f1f44]    BIOS reserved ==> [000009f800 - 00000f1f44]
  #7 [00000f206c - 00000f3bc0]    BIOS reserved ==> [00000f206c - 00000f3bc0]
  #8 [00000f1f44 - 00000f206c]     MP-table mpc ==> [00000f1f44 - 00000f206c]
  #9 [0000010000 - 0000012000]       TRAMPOLINE ==> [0000010000 - 0000012000]
  #10 [0000012000 - 0000016000]      ACPI WAKEUP ==> [0000012000 - 0000016000]
  #11 [0000016000 - 0000018000]          PGTABLE ==> [0000016000 - 0000018000]
 [ffffea0000000000-ffffea00015fffff] PMD -> [ffff880001c00000-ffff8800031fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0005fff0
On node 0 totalpages: 393087
  DMA zone: 56 pages used for memmap
  DMA zone: 104 pages reserved
  DMA zone: 3823 pages, LIFO batch:0
  DMA32 zone: 5320 pages used for memmap
  DMA32 zone: 383784 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 60000000 (gap: 60000000:80000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880001800000 s89176 r8192 d21416 u1048576
pcpu-alloc: s89176 r8192 d21416 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 387607
Kernel command line: root=/dev/disk/by-uuid/2964677c-8fba-46a8-957a-f1fd578d9a51 ro nomodeset
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 419a000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 1536780k/1572800k available (3457k kernel code, 452k absent, 34948k reserved, 1809k data, 484k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:768
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 15728640 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 2211.523 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4424.33 BogoMIPS (lpj=7371743)
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
tseg: 0000000000
mce: CPU supports 5 MCE banks
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
SMP alternatives: switching to UP code
ACPI: Core revision 20091214
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02
Brought up 1 CPUs
Total of 1 processors activated (4424.33 BogoMIPS).
NET: Registered protocol family 16
node 0 link 0: io port [8000, ffff]
TOM: 0000000060000000 aka 1536M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [feb00000, fec0ffff]
node 0 link 0: mmio [60000000, dfffffff]
node 0 link 0: mmio [e0000000, e03fffff]
bus: [00, 03] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [a0000, bffff]
bus: 00 index 2 mmio: [e0400000, fcffffffff]
bus: 00 index 3 mmio: [60000000, e03fffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io  0x0000-0x03af] (ignored)
pci_root PNP0A08:00: host bridge window [io  0x03e0-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io  0x8000-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [io  0x03b0-0x03df] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xdfffffff] (ignored)
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:01.1: reg 10: [io  0xfc00-0xfc1f]
pci 0000:00:01.1: reg 20: [io  0x4c00-0x4c3f]
pci 0000:00:01.1: reg 24: [io  0x4c40-0x4c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10: [mem 0xdffff000-0xdfffffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: reg 10: [io  0xf000-0xf0ff]
pci 0000:00:04.0: reg 14: [io  0xec00-0xecff]
pci 0000:00:04.0: reg 18: [mem 0xdfffd000-0xdfffdfff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:06.0: reg 20: [io  0xe000-0xe00f]
pci 0000:00:07.0: reg 10: [io  0x09f0-0x09f7]
pci 0000:00:07.0: reg 14: [io  0x0bf0-0x0bf3]
pci 0000:00:07.0: reg 18: [io  0x0970-0x0977]
pci 0000:00:07.0: reg 1c: [io  0x0b70-0x0b73]
pci 0000:00:07.0: reg 20: [io  0xcc00-0xcc0f]
pci 0000:00:07.0: reg 24: [mem 0xdfffb000-0xdfffbfff]
pci 0000:00:08.0: reg 10: [io  0x09e0-0x09e7]
pci 0000:00:08.0: reg 14: [io  0x0be0-0x0be3]
pci 0000:00:08.0: reg 18: [io  0x0960-0x0967]
pci 0000:00:08.0: reg 1c: [io  0x0b60-0x0b63]
pci 0000:00:08.0: reg 20: [io  0xb800-0xb80f]
pci 0000:00:08.0: reg 24: [mem 0xdfffa000-0xdfffafff]
pci 0000:00:0a.0: reg 10: [mem 0xdfff9000-0xdfff9fff]
pci 0000:00:0a.0: reg 14: [io  0xb400-0xb407]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:01:06.0: reg 10: [mem 0xdfdff000-0xdfdff7ff]
pci 0000:01:06.0: reg 14: [mem 0xdfdf8000-0xdfdfbfff]
pci 0000:01:06.0: supports D1 D2
pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:06.0: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:09.0:   bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:09.0:   bridge window [mem 0xdfe00000-0xdfefffff pref]
pci 0000:00:0d.0: PCI bridge to [bus 02-02]
pci 0000:00:0d.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:0d.0:   bridge window [mem 0xdfc00000-0xdfcfffff]
pci 0000:00:0d.0:   bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
pci 0000:03:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:03:00.0: reg 14: [io  0x8c00-0x8cff]
pci 0000:03:00.0: reg 18: [mem 0xdfaf0000-0xdfafffff]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.1: reg 10: [mem 0xdfae0000-0xdfaeffff]
pci 0000:03:00.1: supports D1 D2
pci 0000:00:0e.0: PCI bridge to [bus 03-03]
pci 0000:00:0e.0:   bridge window [io  0x8000-0x8fff]
pci 0000:00:0e.0:   bridge window [mem 0xdfa00000-0xdfafffff]
pci 0000:00:0e.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [io  0x4000-0x407f] has been reserved
system 00:00: [io  0x4080-0x40ff] has been reserved
system 00:00: [io  0x4400-0x447f] has been reserved
system 00:00: [io  0x4480-0x44ff] has been reserved
system 00:00: [io  0x4800-0x487f] has been reserved
system 00:00: [io  0x4880-0x48ff] has been reserved
system 00:02: [io  0x04d0-0x04d1] has been reserved
system 00:02: [io  0x0800-0x0805] has been reserved
system 00:02: [io  0x0290-0x029f] has been reserved
system 00:02: [io  0x0290-0x0297] has been reserved
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:0d: [mem 0x000d5800-0x000d7fff] has been reserved
system 00:0d: [mem 0x000f0000-0x000fbfff] could not be reserved
system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0d: [mem 0x5fff0000-0x5fffffff] could not be reserved
system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x00100000-0x5ffeffff] could not be reserved
system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved
system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
Switching to clocksource acpi_pm
pci 0000:00:09.0: PCI bridge to [bus 01-01]
pci 0000:00:09.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:09.0:   bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:09.0:   bridge window [mem 0xdfe00000-0xdfefffff pref]
pci 0000:00:0d.0: PCI bridge to [bus 02-02]
pci 0000:00:0d.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:0d.0:   bridge window [mem 0xdfc00000-0xdfcfffff]
pci 0000:00:0d.0:   bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xdfa00000-0xdfa1ffff pref]
pci 0000:00:0e.0: PCI bridge to [bus 03-03]
pci 0000:00:0e.0:   bridge window [io  0x8000-0x8fff]
pci 0000:00:0e.0:   bridge window [mem 0xdfa00000-0xdfafffff]
pci 0000:00:0e.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:01: resource 2 [mem 0xdfe00000-0xdfefffff pref]
pci_bus 0000:01: resource 3 [io  0x0000-0xffff]
pci_bus 0000:01: resource 4 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:02: resource 1 [mem 0xdfc00000-0xdfcfffff]
pci_bus 0000:02: resource 2 [mem 0xdfb00000-0xdfbfffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x8000-0x8fff]
pci_bus 0000:03: resource 1 [mem 0xdfa00000-0xdfafffff]
pci_bus 0000:03: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Linking AER extended capability
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Linking AER extended capability
pci 0000:03:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1806k freed
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1272272423.230:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3006
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:0d.0: setting latency timer to 64
pcieport 0000:00:0d.0: irq 24 for MSI/MSI-X
pcieport 0000:00:0e.0: setting latency timer to 64
pcieport 0000:00:0e.0: irq 25 for MSI/MSI-X
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 484k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
SCSI subsystem initialized
Floppy drive(s): fd0 is 1.44M
libata version 3.00 loaded.
sata_nv 0000:00:07.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:07.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 23
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 23
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 22
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 22
FDC 0 is a post-1991 82077
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: Maxtor 6Y120M0, YAR511W0, max UDMA/133
ata1.00: 240121728 sectors, multi 16: LBA 
ata3.00: ATA-7: Maxtor 6V200E0, VA111630, max UDMA/133
ata3.00: 398297088 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y120M0   YAR5 PQ: 0 ANSI: 5
ata3.00: configured for UDMA/133
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7: WDC WD800JD-23LSA0, 07.01D07, max UDMA/133
ata2.00: 156312576 sectors, multi 16: LBA48 
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      WDC WD800JD-23LS 07.0 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access     ATA      Maxtor 6V200E0   VA11 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 240121728 512-byte logical blocks: (122 GB/114 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
sd 1:0:0:0: [sdb] 156312576 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb:
sd 2:0:0:0: [sdc] 398297088 512-byte logical blocks: (203 GB/189 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
 sda1 sda2 sda3 sda4
 sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
sd 0:0:0:0: [sda] Attached SCSI disk
ata4: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda4): mounted filesystem with ordered data mode
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
udev: starting version 151
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21
forcedeth 0000:00:0a.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
input: PC Speaker as /devices/platform/pcspkr/input/input2
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
Uniform Multi-Platform E-IDE driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
EDAC MC: Ver: 2.1.0 Apr  4 2010
IT8712 SuperIO detected.
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
EDAC amd64_edac:  Ver: 3.3.0 Apr  4 2010
lp0: using parport0 (interrupt-driven).
[drm] Initialized drm 1.1.0 20060810
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
firewire_ohci 0000:01:06.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
ppdev: user-space parallel port driver
logips2pp: Detected unknown logitech mouse model 106
firewire_ohci: Added fw-ohci device 0000:01:06.0, OHCI version 1.10
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 1, addr 00:01:6c:f7:44:c2
forcedeth 0000:00:0a.0: highdma csum lnktim desc-v3
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
ehci_hcd 0000:00:02.1: irq 20, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
amd74xx 0000:00:06.0: UDMA133 controller
amd74xx 0000:00:06.0: IDE controller (0x10de:0x0053 rev 0xf2)
amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xe000-0xe007
    ide1: BM-DMA at 0xe008-0xe00f
Probing IDE interface ide0...
[drm] VGACON disable radeon kernel modesetting.
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
pci 0000:03:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
pci 0000:03:00.0: setting latency timer to 64
[drm] Initialized radeon 1.32.0 20080528 for 0000:03:00.0 on minor 0
input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input5
firewire_core: created device fw0: GUID 00016c20000f4cd8, S400
Probing IDE interface ide1...
hdc: HL-DT-ST RW/DVD GCC-4482B, ATAPI CD/DVD-ROM drive
hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
amd64_edac: probe of 0000:00:18.2 failed with error -22
i2c i2c-0: nForce2 SMBus adapter at 0x4c00
i2c i2c-1: nForce2 SMBus adapter at 0x4c40
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 23, io mem 0xdffff000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
Intel ICH 0000:00:04.0: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 50696 usecs (2496 samples)
intel8x0: clocking to 46796
ide-cd driver 5.00
ide-cd: hdc: ATAPI 48X DVD-ROM CD-R/RW drive, 1536kB Cache
Uniform CD-ROM driver Revision: 3.20
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda2): using internal journal
EXT3-fs (sda2): mounted filesystem with writeback data mode
EXT4-fs (sdb1): mounted filesystem with ordered data mode
EXT4-fs (sdc1): mounted filesystem with ordered data mode
Adding 2000084k swap on /dev/sda3.  Priority:-1 extents:1 across:2000084k 
Slow work thread pool: Starting up
Slow work thread pool: Ready
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
vboxdrv: counter framework which can generate NMIs is active. You have to prevent
vboxdrv: the usage of hardware performance counters by
vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
vboxdrv: Found 1 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa058b160
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.1.4 (interface 0x00100001).
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs