root ~ #  powertop -d
PowerTOP 1.11   (C) 2007, 2008 Intel Corporation

Raccolta dati per 15 secondi


Your CPU supports the following C-states : C1 C2 C3 C4
Your BIOS reports the following C-states : C1 C4
Cn                Avg residency
C0 (cpu occupata)      (27,9%)
polling           0,0ms ( 0,0%)
C1 mwait          0,1ms ( 0,1%)
C4 mwait          0,0ms (72,0%)
P-states (frequencies)
Wakeups-from-idle per second : 35734,7  interval: 15,0s
no ACPI power usage estimate available
Top causes for wakeups:
 26,2% (118,3)          chromium : hrtimer_start_range_ns (hrtimer_wakeup)
 21,7% ( 98,1)     <kernel core> : hrtimer_start_range_ns (tick_sched_timer)
 18,3% ( 82,7)       <interrupt> : extra timer interrupt
 13,6% ( 61,3)      <kernel IPI> : Rescheduling interrupts
  4,1% ( 18,7)     <kernel core> : hrtimer_start (tick_sched_timer)
  3,5% ( 15,8)       <interrupt> : uhci_hcd:usb3, uhci_hcd:usb6, ath9k
  3,3% ( 14,9)          chromium : sys_epoll_wait (process_timeout)
  2,2% ( 10,0)     <kernel core> : run_timer_softirq (ath_ani_calibrate)
  1,7% (  7,9)     <kernel core> : usb_hcd_poll_rh_status (rh_timer_func)
  0,9% (  4,2)              phy0 : queue_delayed_work (delayed_work_timer_fn)
  0,8% (  3,7)          zfs-fuse : hrtimer_start_range_ns (hrtimer_wakeup)
  0,5% (  2,1)       <interrupt> : i915
  0,4% (  1,9)   USB device  3-1 : USB Receiver (Logitech)
  0,4% (  1,6)                 X : i915_add_request (i915_hangcheck_elapsed)
  0,3% (  1,3)               exe : hrtimer_start_range_ns (hrtimer_wakeup)
  0,2% (  1,0)   multiload-apple : hrtimer_start_range_ns (hrtimer_wakeup)
  0,2% (  0,9)                 X : queue_delayed_work (delayed_work_timer_fn)
  0,2% (  0,9)          zfs-fuse : read_events (timeout_func)
  0,1% (  0,7)       <interrupt> : ahci
  0,1% (  0,6)      <kernel IPI> : TLB shootdowns
  0,1% (  0,5)    sensors-applet : hrtimer_start_range_ns (hrtimer_wakeup)
  0,1% (  0,4)      <kernel IPI> : Function call interrupts
  0,1% (  0,3)                 X : intel_mark_busy (intel_crtc_idle_timer)
  0,1% (  0,3)   /usr/bin/termin : hrtimer_start_range_ns (hrtimer_wakeup)
  0,1% (  0,3)     <kernel core> : enqueue_task_rt (sched_rt_period_timer)
  0,1% (  0,3)   system-tools-ba : hrtimer_start_range_ns (hrtimer_wakeup)
  0,1% (  0,3)            compiz : hrtimer_start_range_ns (hrtimer_wakeup)
  0,1% (  0,3)          nautilus : hrtimer_start_range_ns (hrtimer_wakeup)
  0,0% (  0,2)              init : hrtimer_start_range_ns (hrtimer_wakeup)
  0,0% (  0,2)      wicd-monitor : hrtimer_start_range_ns (hrtimer_wakeup)
  0,0% (  0,2)      clock-applet : hrtimer_start_range_ns (hrtimer_wakeup)
  0,0% (  0,2)       gnome-panel : hrtimer_start_range_ns (hrtimer_wakeup)
  0,0% (  0,1)          ddclient : hrtimer_start_range_ns (hrtimer_wakeup)
  0,0% (  0,1)          gconfd-2 : hrtimer_start_range_ns (hrtimer_wakeup)
  0,0% (  0,1)         flush-8:0 : bdi_writeback_task (process_timeout)
  0,0% (  0,1)          events/0 : queue_delayed_work (delayed_work_timer_fn)
  0,0% (  0,1)             cupsd : sys_epoll_wait (process_timeout)
  0,0% (  0,1)        flush-0:15 : bdi_writeback_task (process_timeout)
  0,0% (  0,1)       bdi-default : bdi_forker_task (process_timeout)
  0,0% (  0,1)          chromium : run_timer_softirq (sync_supers_timer_fn)
  0,0% (  0,1)                 X : hrtimer_start_range_ns (hrtimer_wakeup)
  0,0% (  0,1)     <kernel core> : sk_reset_timer (tcp_delack_timer)
  0,0% (  0,1)   battstat-applet : hrtimer_start_range_ns (hrtimer_wakeup)
  0,0% (  0,1)              wicd : start_this_handle (commit_timeout)
  0,0% (  0,1)     <kernel core> : run_timer_softirq (sta_info_cleanup)
  0,0% (  0,1)     <kernel core> : inet_twdr_hangman (inet_twdr_hangman)

A USB device is active 100,0% of the time:
USB device  3-1 : USB Receiver (Logitech)

Suggestion: Enable USB autosuspend by pressing the U key or adding
usbcore.autosuspend=1 to the kernel command line in the grub config

Suggestion: increase the VM dirty writeback time from 5,00 to 15 seconds with:
 echo 1500 > /proc/sys/vm/dirty_writeback_centisecs
This wakes the disk up less frequently for background VM activity

Suggestion: Enable SATA ALPM link power management via:
 echo min_power > /sys/class/scsi_host/host0/link_power_management_policy
or press the S key.

Recent USB suspend statistics
Active  Device name
100,0%  USB device  4-2 : HP Integrated Module (Broadcom Corp)
100,0%  USB device  3-1 : USB Receiver (Logitech)
100,0%  USB device  2-4 : HP Webcam-50 (QCM)
 0,0%  USB device usb7 : UHCI Host Controller (Linux 2.6.32-ARCH uhci_hcd)
 0,0%  USB device usb6 : UHCI Host Controller (Linux 2.6.32-ARCH uhci_hcd)
 0,0%  USB device usb5 : UHCI Host Controller (Linux 2.6.32-ARCH uhci_hcd)
100,0%  USB device usb4 : UHCI Host Controller (Linux 2.6.32-ARCH uhci_hcd)
100,0%  USB device usb3 : UHCI Host Controller (Linux 2.6.32-ARCH uhci_hcd)
100,0%  USB device usb2 : EHCI Host Controller (Linux 2.6.32-ARCH ehci_hcd)
 0,0%  USB device usb1 : EHCI Host Controller (Linux 2.6.32-ARCH ehci_hcd)

--

root ~ #  dmidecode
# dmidecode 2.10
SMBIOS 2.6 present.
24 structures occupying 1185 bytes.
Table at 0x000E8280.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
       Vendor: Hewlett-Packard
       Version: F.12
       Release Date: 12/11/2009
       ROM Size: 2048 kB
       Characteristics:
               PCI is supported
               BIOS is upgradeable
               BIOS shadowing is allowed
               Boot from CD is supported
               Selectable boot is supported
               BIOS ROM is socketed
               EDD is supported
               Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
               Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
               5.25"/360 kB floppy services are supported (int 13h)
               5.25"/1.2 MB floppy services are supported (int 13h)
               3.5"/720 kB floppy services are supported (int 13h)
               3.5"/2.88 MB floppy services are supported (int 13h)
               8042 keyboard services are supported (int 9h)
               CGA/mono video services are supported (int 10h)
               ACPI is supported
               USB legacy is supported
               Targeted content distribution is supported
       BIOS Revision: 15.18
       Firmware Revision: 73.13

Handle 0x0001, DMI type 1, 27 bytes
System Information
       Manufacturer: Hewlett-Packard
       Product Name: HP Pavilion dm1 Notebook PC
       Version: 048C110000241B00000320000
       Serial Number: CNF9513F0Z
       UUID: 39464E43-3135-4633-305A-00269EC4496F
       Wake-up Type: Power Switch
       SKU Number: VY489EA#ABZ
       Family: 103C_5335KV

Handle 0x0002, DMI type 2, 16 bytes
Base Board Information
       Manufacturer: Hewlett-Packard
       Product Name: 3663
       Version: 49.0D
       Serial Number: CNF9513F0Z
       Asset Tag: Base Board Asset Tag
       Features:
               Board is a hosting board
               Board is replaceable
       Location In Chassis: Base Board Chassis Location
       Chassis Handle: 0x0003
       Type: Motherboard
       Contained Object Handles: 0

Handle 0x0003, DMI type 3, 22 bytes
Chassis Information
       Manufacturer: Hewlett-Packard
       Type: Notebook
       Lock: Not Present
       Version: N/A
       Serial Number: None
       Asset Tag: Not Specified
       Boot-up State: Safe
       Power Supply State: Safe
       Thermal State: Safe
       Security Status: None
       OEM Information: 0x0000001B
       Height: Unspecified
       Number Of Power Cords: 1
       Contained Elements: 0

Handle 0x0004, DMI type 16, 15 bytes
Physical Memory Array
       Location: System Board Or Motherboard
       Use: System Memory
       Error Correction Type: None
       Maximum Capacity: 5 GB
       Error Information Handle: Not Provided
       Number Of Devices: 2

Handle 0x0005, DMI type 17, 28 bytes
Memory Device
       Array Handle: 0x0004
       Error Information Handle: Not Provided
       Total Width: 64 bits
       Data Width: 64 bits
       Size: 1024 MB
       Form Factor: SODIMM
       Set: None
       Locator: DIMM0
       Bank Locator: BANK 0
       Type: <OUT OF SPEC>
       Type Detail: Synchronous
       Speed: 800 MHz
       Manufacturer: Micron
       Serial Number: 00000000
       Asset Tag: Unknown
       Part Number: 8JSF12864HZ-1G1F1F
       Rank: Unknown

Handle 0x0006, DMI type 20, 19 bytes
Memory Device Mapped Address
       Starting Address: 0x00000000000
       Ending Address: 0x0003FFFFFFF
       Range Size: 1 GB
       Physical Device Handle: 0x0005
       Memory Array Mapped Address Handle: 0x0009
       Partition Row Position: 2
       Interleave Position: 1
       Interleaved Data Depth: 1

Handle 0x0007, DMI type 17, 28 bytes
Memory Device
       Array Handle: 0x0004
       Error Information Handle: Not Provided
       Total Width: 64 bits
       Data Width: 64 bits
       Size: 1024 MB
       Form Factor: SODIMM
       Set: None
       Locator: DIMM1
       Bank Locator: BANK 2
       Type: <OUT OF SPEC>
       Type Detail: Synchronous
       Speed: 800 MHz
       Manufacturer: Micron
       Serial Number: E633576E
       Asset Tag: Unknown
       Part Number: 8JSF12864HZ-1G4F1
       Rank: Unknown

Handle 0x0008, DMI type 20, 19 bytes
Memory Device Mapped Address
       Starting Address: 0x00000000000
       Ending Address: 0x0003FFFFFFF
       Range Size: 1 GB
       Physical Device Handle: 0x0007
       Memory Array Mapped Address Handle: 0x0009
       Partition Row Position: 2
       Interleave Position: 2
       Interleaved Data Depth: 1

Handle 0x0009, DMI type 19, 15 bytes
Memory Array Mapped Address
       Starting Address: 0x00000000000
       Ending Address: 0x0007FFFFFFF
       Range Size: 2 GB
       Physical Array Handle: 0x0004
       Partition Width: 0

Handle 0x000A, DMI type 4, 42 bytes
Processor Information
       Socket Designation: CPU
       Type: Central Processor
       Family: Core 2 Duo
       Manufacturer: Intel(R) Corporation
       ID: 7A 06 01 00 FF FB EB BF
       Signature: Type 0, Family 6, Model 23, Stepping 10
       Flags:
               FPU (Floating-point unit on-chip)
               VME (Virtual mode extension)
               DE (Debugging extension)
               PSE (Page size extension)
               TSC (Time stamp counter)
               MSR (Model specific registers)
               PAE (Physical address extension)
               MCE (Machine check exception)
               CX8 (CMPXCHG8 instruction supported)
               APIC (On-chip APIC hardware supported)
               SEP (Fast system call)
               MTRR (Memory type range registers)
               PGE (Page global enable)
               MCA (Machine check architecture)
               CMOV (Conditional move instruction supported)
               PAT (Page attribute table)
               PSE-36 (36-bit page size extension)
               CLFSH (CLFLUSH instruction supported)
               DS (Debug store)
               ACPI (ACPI supported)
               MMX (MMX technology supported)
               FXSR (Fast floating-point save and restore)
               SSE (Streaming SIMD extensions)
               SSE2 (Streaming SIMD extensions 2)
               SS (Self-snoop)
               HTT (Hyper-threading technology)
               TM (Thermal monitor supported)
               PBE (Pending break enabled)
       Version: Genuine Intel(R) CPU           U2300  @ 1.20GHz
       Voltage: 1.6 V
       External Clock: 800 MHz
       Max Speed: 1200 MHz
       Current Speed: 1200 MHz
       Status: Populated, Enabled
       Upgrade: Other
       L1 Cache Handle: 0x000D
       L2 Cache Handle: 0x000B
       L3 Cache Handle: Not Provided
       Serial Number: Not Specified
       Asset Tag: FFFF
       Part Number: Not Specified
       Core Count: 2
       Core Enabled: 2
       Thread Count: 2
       Characteristics:
               64-bit capable

Handle 0x000B, DMI type 7, 19 bytes
Cache Information
       Socket Designation: L2 Cache
       Configuration: Enabled, Not Socketed, Level 2
       Operational Mode: Write Back
       Location: Internal
       Installed Size: 1024 kB
       Maximum Size: 1024 kB
       Supported SRAM Types:
               Asynchronous
       Installed SRAM Type: Asynchronous
       Speed: Unknown
       Error Correction Type: Single-bit ECC
       System Type: Unified
       Associativity: 4-way Set-associative

Handle 0x000C, DMI type 7, 19 bytes
Cache Information
       Socket Designation: L1 Cache
       Configuration: Enabled, Not Socketed, Level 1
       Operational Mode: Write Back
       Location: Internal
       Installed Size: 32 kB
       Maximum Size: 32 kB
       Supported SRAM Types:
               Asynchronous
       Installed SRAM Type: Asynchronous
       Speed: Unknown
       Error Correction Type: Single-bit ECC
       System Type: Instruction
       Associativity: 8-way Set-associative

Handle 0x000D, DMI type 7, 19 bytes
Cache Information
       Socket Designation: L1 Cache
       Configuration: Enabled, Not Socketed, Level 1
       Operational Mode: Write Back
       Location: Internal
       Installed Size: 32 kB
       Maximum Size: 32 kB
       Supported SRAM Types:
               Asynchronous
       Installed SRAM Type: Asynchronous
       Speed: Unknown
       Error Correction Type: Single-bit ECC
       System Type: Data
       Associativity: 8-way Set-associative

Handle 0x000E, DMI type 9, 17 bytes
System Slot Information
       Designation: PCI Express Graphic X16
       Type: x16 PCI Express
       Current Usage: Available
       Length: Other
       ID: 0
       Characteristics:
               PME signal is supported
               Hot-plug devices are supported

Handle 0x000F, DMI type 9, 17 bytes
System Slot Information
       Designation: PCI Express-0
       Type: x1 PCI Express
       Current Usage: Available
       Length: Other
       ID: 0
       Characteristics:
               PME signal is supported
               Hot-plug devices are supported

Handle 0x0010, DMI type 10, 6 bytes
On Board Device Information
       Type: Video
       Status: Enabled
       Description:

Handle 0x0011, DMI type 22, 26 bytes
Portable Battery
       Location: Primary
       Manufacturer: SMP-LG26B3
       Name: PT06055
       Design Capacity: 5100 mWh
       Design Voltage: 10800 mV
       SBDS Version: 1.1
       Maximum Error: 1%
       SBDS Serial Number: 0F7D
       SBDS Manufacture Date: 2009-12-04
       SBDS Chemistry: LION
       OEM-specific Information: 0x00000000

Handle 0x0012, DMI type 11, 5 bytes
OEM Strings
       String 1: $HP$
       String 2: LOC#ABZ
       String 3: ABS 70/71 78 79 7A 7B
       String 4: CNB1 048C110000241B00000320000

Handle 0x0013, DMI type 15, 29 bytes
System Event Log
       Area Length: 32672 bytes
       Header Start Offset: 0x0000
       Data Start Offset: 0x0000
       Access Method: General-purpose non-volatile data functions
       Access Address: 0x0000
       Status: Valid, Not Full
       Change Token: 0x12345678
       Header Format: OEM-specific
       Supported Log Type Descriptors: 3
       Descriptor 1: POST memory resize
       Data Format 1: None
       Descriptor 2: POST error
       Data Format 2: POST results bitmap
       Descriptor 3: Log area reset/cleared
       Data Format 3: None

Handle 0x0014, DMI type 32, 20 bytes
System Boot Information
       Status: No errors detected

Handle 0x0015, DMI type 41, 11 bytes
Onboard Device
       Reference Designation: Mobile Intel(R) Series Express Chipset Family
       Type: Video
       Status: Enabled
       Type Instance: 1
       Bus Address: 0000:00:02.0

Handle 0x0016, DMI type 41, 11 bytes
Onboard Device
       Reference Designation: Atheros AR9285 802.11b/g/n WiFi Adapter
       Type: Ethernet
       Status: Enabled
       Type Instance: 1
       Bus Address: 0000:02:00.0

Handle 0x0017, DMI type 127, 4 bytes
End Of Table

--

root ~ #  lspci -vvv
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub (rev 07)
       Subsystem: Hewlett-Packard Company Device 3663
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
       Latency: 0
       Capabilities: [e0] Vendor Specific Information: Len=0a <?>
       Kernel driver in use: agpgart-intel
       Kernel modules: intel-agp

00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series
Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA
controller])
       Subsystem: Hewlett-Packard Company Device 3663
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0
       Interrupt: pin A routed to IRQ 26
       Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=4M]
       Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
       Region 4: I/O ports at 40f0 [size=8]
       Expansion ROM at <unassigned> [disabled]
       Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
               Address: fee0300c  Data: 4169
       Capabilities: [d0] Power Management version 3
               Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
       Kernel driver in use: i915
       Kernel modules: i915

00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller (rev 07)
       Subsystem: Hewlett-Packard Company Device 3663
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0
       Region 0: Memory at 92400000 (64-bit, non-prefetchable) [size=1M]
       Capabilities: [d0] Power Management version 3
               Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])
       Subsystem: Hewlett-Packard Company Device 3663
       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0
       Interrupt: pin A routed to IRQ 16
       Region 4: I/O ports at 40c0 [size=32]
       Capabilities: [50] PCI Advanced Features
               AFCap: TP+ FLR+
               AFCtrl: FLR-
               AFStatus: TP-
       Kernel driver in use: uhci_hcd
       Kernel modules: uhci-hcd

00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2
EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
       Subsystem: Hewlett-Packard Company Device 3663
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0
       Interrupt: pin D routed to IRQ 19
       Region 0: Memory at 94505c00 (32-bit, non-prefetchable) [size=1K]
       Capabilities: [50] Power Management version 2
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [58] Debug port: BAR=1 offset=00a0
       Capabilities: [98] PCI Advanced Features
               AFCap: TP+ FLR+
               AFCtrl: FLR-
               AFStatus: TP-
       Kernel driver in use: ehci_hcd
       Kernel modules: ehci-hcd

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 03)
       Subsystem: Hewlett-Packard Company Device 3663
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0, Cache Line Size: 64 bytes
       Interrupt: pin A routed to IRQ 22
       Region 0: Memory at 94500000 (64-bit, non-prefetchable) [size=16K]
       Capabilities: [50] Power Management version 2
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
               Address: 0000000000000000  Data: 0000
       Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                       ExtTag- RBE- FLReset+
               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                       MaxPayload 128 bytes, MaxReadReq 128 bytes
               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
               LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0
<64ns, L1 <1us
                       ClockPM- Surprise- LLActRep- BwNot-
               LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive-
BWMgmt- ABWMgmt-
       Capabilities: [100 v1] Virtual Channel
               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
               Arb:    Fixed- WRR32- WRR64- WRR128-
               Ctrl:   ArbSelect=Fixed
               Status: InProgress-
               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                       Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                       Status: NegoPending- InProgress-
               VC1:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                       Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                       Ctrl:   Enable+ ID=1 ArbSelect=Fixed TC/VC=00
                       Status: NegoPending- InProgress-
       Capabilities: [130 v1] Root Complex Link
               Desc:   PortNumber=0f ComponentID=02 EltType=Config
               Link0:  Desc:   TargetPort=00 TargetComponent=02 AssocRCRB-
LinkType=MemMapped LinkValid+
                       Addr:   00000000fed1c000
       Kernel driver in use: HDA Intel
       Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 (rev 03) (prog-if 00 [Normal decode])
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0, Cache Line Size: 64 bytes
       Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
       I/O behind bridge: 00003000-00003fff
       Memory behind bridge: 93500000-944fffff
       Prefetchable memory behind bridge: 0000000090400000-00000000913fffff
       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
       BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
       Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                       ExtTag- RBE+ FLReset-
               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                       MaxPayload 128 bytes, MaxReadReq 128 bytes
               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
               LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<256ns, L1 <4us
                       ClockPM- Surprise- LLActRep+ BwNot-
               LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt- ABWMgmt-
               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
                       Slot #0, PowerLimit 6.500W; Interlock- NoCompl-
               SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                       Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
                       Changed: MRL- PresDet+ LinkState+
               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
               RootCap: CRSVisible-
               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
       Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
               Address: fee0300c  Data: 4159
       Capabilities: [90] Subsystem: Hewlett-Packard Company Device 3663
       Capabilities: [a0] Power Management version 2
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [100 v1] Virtual Channel
               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
               Arb:    Fixed+ WRR32- WRR64- WRR128-
               Ctrl:   ArbSelect=Fixed
               Status: InProgress-
               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                       Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                       Status: NegoPending- InProgress-
       Capabilities: [180 v1] Root Complex Link
               Desc:   PortNumber=01 ComponentID=02 EltType=Config
               Link0:  Desc:   TargetPort=00 TargetComponent=02 AssocRCRB-
LinkType=MemMapped LinkValid+
                       Addr:   00000000fed1c000
       Kernel driver in use: pcieport
       Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 2 (rev 03) (prog-if 00 [Normal decode])
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0, Cache Line Size: 64 bytes
       Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
       I/O behind bridge: 00002000-00002fff
       Memory behind bridge: 92500000-934fffff
       Prefetchable memory behind bridge: 0000000091400000-00000000923fffff
       Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
       BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
       Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                       ExtTag- RBE+ FLReset-
               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                       RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                       MaxPayload 128 bytes, MaxReadReq 128 bytes
               DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
               LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<256ns, L1 <4us
                       ClockPM- Surprise- LLActRep+ BwNot-
               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt- ABWMgmt-
               SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
                       Slot #1, PowerLimit 6.500W; Interlock- NoCompl-
               SltCtl: Enable: AttnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
                       Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
               SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
                       Changed: MRL- PresDet- LinkState-
               RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
               RootCap: CRSVisible-
               RootSta: PME ReqID 0000, PMEStatus- PMEPending-
       Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
               Address: fee0300c  Data: 4161
       Capabilities: [90] Subsystem: Hewlett-Packard Company Device 3663
       Capabilities: [a0] Power Management version 2
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [100 v1] Virtual Channel
               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
               Arb:    Fixed+ WRR32- WRR64- WRR128-
               Ctrl:   ArbSelect=Fixed
               Status: InProgress-
               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                       Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                       Status: NegoPending- InProgress-
       Capabilities: [180 v1] Root Complex Link
               Desc:   PortNumber=02 ComponentID=02 EltType=Config
               Link0:  Desc:   TargetPort=00 TargetComponent=02 AssocRCRB-
LinkType=MemMapped LinkValid+
                       Addr:   00000000fed1c000
       Kernel driver in use: pcieport
       Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
       Subsystem: Hewlett-Packard Company Device 3663
       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0
       Interrupt: pin A routed to IRQ 20
       Region 4: I/O ports at 40a0 [size=32]
       Capabilities: [50] PCI Advanced Features
               AFCap: TP+ FLR+
               AFCtrl: FLR-
               AFStatus: TP-
       Kernel driver in use: uhci_hcd
       Kernel modules: uhci-hcd

00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
       Subsystem: Hewlett-Packard Company Device 3663
       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0
       Interrupt: pin B routed to IRQ 19
       Region 4: I/O ports at 4080 [size=32]
       Capabilities: [50] PCI Advanced Features
               AFCap: TP+ FLR+
               AFCtrl: FLR-
               AFStatus: TP-
       Kernel driver in use: uhci_hcd
       Kernel modules: uhci-hcd

00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
       Subsystem: Hewlett-Packard Company Device 3663
       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0
       Interrupt: pin D routed to IRQ 16
       Region 4: I/O ports at 4060 [size=32]
       Capabilities: [50] PCI Advanced Features
               AFCap: TP+ FLR+
               AFCtrl: FLR-
               AFStatus: TP-
       Kernel driver in use: uhci_hcd
       Kernel modules: uhci-hcd

00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #6 (rev 03) (prog-if 00 [UHCI])
       Subsystem: Hewlett-Packard Company Device 3663
       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0
       Interrupt: pin C routed to IRQ 18
       Region 4: I/O ports at 4040 [size=32]
       Capabilities: [50] PCI Advanced Features
               AFCap: TP+ FLR+
               AFCtrl: FLR-
               AFStatus: TP-
       Kernel driver in use: uhci_hcd
       Kernel modules: uhci-hcd

00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2
EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
       Subsystem: Hewlett-Packard Company Device 3663
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0
       Interrupt: pin A routed to IRQ 20
       Region 0: Memory at 94505800 (32-bit, non-prefetchable) [size=1K]
       Capabilities: [50] Power Management version 2
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [58] Debug port: BAR=1 offset=00a0
       Capabilities: [98] PCI Advanced Features
               AFCap: TP+ FLR+
               AFCtrl: FLR-
               AFStatus: TP-
       Kernel driver in use: ehci_hcd
       Kernel modules: ehci-hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
(prog-if 01 [Subtractive decode])
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0
       Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
       I/O behind bridge: 0000f000-00000fff
       Memory behind bridge: fff00000-000fffff
       Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
       Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
       BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
               PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
       Capabilities: [50] Subsystem: Hewlett-Packard Company Device 3663

00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
       Subsystem: Hewlett-Packard Company Device 3663
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0
       Capabilities: [e0] Vendor Specific Information: Len=0c <?>
       Kernel modules: iTCO_wdt

00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI
Controller (rev 03) (prog-if 01 [AHCI 1.0])
       Subsystem: Hewlett-Packard Company Device 3663
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
       Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0
       Interrupt: pin B routed to IRQ 27
       Region 0: I/O ports at 40e8 [size=8]
       Region 1: I/O ports at 40fc [size=4]
       Region 2: I/O ports at 40e0 [size=8]
       Region 3: I/O ports at 40f8 [size=4]
       Region 4: I/O ports at 4020 [size=32]
       Region 5: Memory at 94505000 (32-bit, non-prefetchable) [size=2K]
       Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
               Address: fee0300c  Data: 4179
       Capabilities: [70] Power Management version 3
               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
       Capabilities: [b0] PCI Advanced Features
               AFCap: TP+ FLR+
               AFCtrl: FLR-
               AFStatus: TP-
       Kernel driver in use: ahci
       Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
       Subsystem: Hewlett-Packard Company Device 3663
       Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
       Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
       Interrupt: pin C routed to IRQ 18
       Region 0: Memory at 94506000 (64-bit, non-prefetchable) [size=256]
       Region 4: I/O ports at 4000 [size=32]
       Kernel driver in use: i801_smbus
       Kernel modules: i2c-i801

00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9
Family) Thermal Subsystem (rev 03)
       Subsystem: Hewlett-Packard Company Device 3663
       Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
       Interrupt: pin C routed to IRQ 11
       Region 0: Memory at 94504000 (64-bit, non-prefetchable) [size=4K]
       Capabilities: [50] Power Management version 3
               Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

02:00.0 Network controller: Atheros Communications Inc. AR9285
Wireless Network Adapter (PCI-Express) (rev 01)
       Subsystem: Hewlett-Packard Company Device 3040
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0, Cache Line Size: 64 bytes
       Interrupt: pin A routed to IRQ 16
       Region 0: Memory at 93500000 (64-bit, non-prefetchable) [size=64K]
       Capabilities: [40] Power Management version 3
               Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
               Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
               Address: 00000000  Data: 0000
       Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                       MaxPayload 128 bytes, MaxReadReq 512 bytes
               DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<512ns, L1 <64us
                       ClockPM- Surprise- LLActRep- BwNot-
               LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
               DevCap2: Completion Timeout: Not Supported, TimeoutDis+
               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
                        Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
                        Compliance De-emphasis: -6dB
               LnkSta2: Current De-emphasis Level: -6dB
       Capabilities: [100 v1] Advanced Error Reporting
               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
               UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
               CESta:  RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
               AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
       Capabilities: [140 v1] Virtual Channel
               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
               Arb:    Fixed- WRR32- WRR64- WRR128-
               Ctrl:   ArbSelect=Fixed
               Status: InProgress-
               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                       Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                       Status: NegoPending- InProgress-
       Capabilities: [160 v1] Device Serial Number 00-15-17-ff-ff-24-14-12
       Capabilities: [170 v1] Power Budgeting <?>
       Kernel driver in use: ath9k
       Kernel modules: ath9k

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
       Subsystem: Hewlett-Packard Company Device 3663
       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
       Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
       Latency: 0, Cache Line Size: 64 bytes
       Interrupt: pin A routed to IRQ 11
       Region 0: I/O ports at 2000 [size=256]
       Region 2: Memory at 91410000 (64-bit, prefetchable) [size=4K]
       Region 4: Memory at 91400000 (64-bit, prefetchable) [size=64K]
       Expansion ROM at 91420000 [disabled] [size=64K]
       Capabilities: [40] Power Management version 3
               Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
               Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
       Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
               Address: 0000000000000000  Data: 0000
       Capabilities: [70] Express (v2) Endpoint, MSI 01
               DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us
                       ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
               DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                       RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                       MaxPayload 128 bytes, MaxReadReq 512 bytes
               DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
               LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<512ns, L1 <64us
                       ClockPM+ Surprise- LLActRep- BwNot-
               LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                       ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
               LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
               DevCap2: Completion Timeout: Not Supported, TimeoutDis+
               DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
               LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
                        Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
                        Compliance De-emphasis: -6dB
               LnkSta2: Current De-emphasis Level: -6dB
       Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
               Vector table: BAR=4 offset=00000000
               PBA: BAR=4 offset=00000800
       Capabilities: [cc] Vital Product Data
               Unknown small resource type 00, will not decode more.
       Capabilities: [100 v1] Advanced Error Reporting
               UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
               UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
               UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
               CESta:  RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
               CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
               AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
       Capabilities: [140 v1] Virtual Channel
               Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
               Arb:    Fixed- WRR32- WRR64- WRR128-
               Ctrl:   ArbSelect=Fixed
               Status: InProgress-
               VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                       Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                       Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                       Status: NegoPending- InProgress-
       Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
       Kernel modules: r8169