Linux version 2.6.31-fbcondecor (root@darkstar) (gcc version 4.4.2 (GCC) ) #1 SMP PREEMPT Sat Nov 14 20:51:19 CET 2009 Command line: ... ro 5 ... nomodeset vga=0x324 splash=silent,theme:archtux quiet console=tty1 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable) BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) DMI 2.3 present. last_pfn = 0x130000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-FFFFF uncachable MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFC0000000 write-back 2 base 00C0000000 mask FFF0000000 write-back 3 base 00CFE00000 mask FFFFE00000 uncachable 4 base 0100000000 mask FFE0000000 write-back 5 base 0120000000 mask FFF0000000 write-back 6 disabled 7 disabled TOM2: 0000000130000000 aka 4864M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcfde0 max_arch_pfn = 0x400000000 e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000001000 (usable) modified: 0000000000001000 - 0000000000006000 (reserved) modified: 0000000000006000 - 000000000009f800 (usable) modified: 000000000009f800 - 00000000000a0000 (reserved) modified: 00000000000f0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000cfde0000 (usable) modified: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) modified: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) modified: 00000000cfdf0000 - 00000000cfe00000 (reserved) modified: 00000000e0000000 - 00000000f0000000 (reserved) modified: 00000000fec00000 - 0000000100000000 (reserved) modified: 0000000100000000 - 0000000130000000 (usable) initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000cfde0000 0000000000 - 00cfc00000 page 2M 00cfc00000 - 00cfde0000 page 4k kernel direct mapping tables up to cfde0000 @ 8000-e000 init_memory_mapping: 0000000100000000-0000000130000000 0100000000 - 0130000000 page 2M kernel direct mapping tables up to 130000000 @ c000-12000 RAMDISK: 37e2f000 - 37fef0c8 ACPI: RSDP 00000000000f70c0 00014 (v00 GBT ) ACPI: RSDT 00000000cfde3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: FACP 00000000cfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: DSDT 00000000cfde30c0 05E2B (v01 GBT GBTUACPI 00001000 MSFT 03000000) ACPI: FACS 00000000cfde0000 00040 ACPI: SSDT 00000000cfde8fc0 00350 (v01 PTLTD POWERNOW 00000001 LTP 00000001) ACPI: HPET 00000000cfde9340 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) ACPI: MCFG 00000000cfde9380 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: APIC 00000000cfde8f00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: Local APIC address 0xfee00000 (8 early reservations) ==> bootmem [0000000000 - 0130000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00016827d0] TEXT DATA BSS ==> [0001000000 - 00016827d0] #3 [0037e2f000 - 0037fef0c8] RAMDISK ==> [0037e2f000 - 0037fef0c8] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [0001683000 - 0001683092] BRK ==> [0001683000 - 0001683092] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] #7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] found SMP MP-table at [ffff8800000f56d0] f56d0 [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00130000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x00000001 0: 0x00000006 -> 0x0000009f 0: 0x00000100 -> 0x000cfde0 0: 0x00100000 -> 0x00130000 On node 0 totalpages: 1047930 DMA zone: 56 pages used for memmap DMA zone: 104 pages reserved DMA zone: 3834 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833048 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10b9a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000001000 - 0000000000006000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000 PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000 PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000 PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000) NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 28 pages at ffff880028022000, static data 82400 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1030802 Kernel command line: ... ro 5 ... nomodeset vga=0x324 splash=silent,theme:archtux quiet console=tty1 PID hash table entries: 4096 (order: 12, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ 20000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 PM: Registered nosave memory: 0000000020000000 - 0000000024000000 Memory: 4050596k/4980736k available (3637k kernel code, 789016k absent, 140224k reserved, 1500k data, 472k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 NR_IRQS:768 Fast TSC calibration using PIT Detected 3106.189 MHz processor. Console: colour dummy device 80x25 console [tty1] enabled hpet clockevent registered HPET: 4 timers in total, 1 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 6214.22 BogoMIPS (lpj=10353963) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) tseg: 00cfe00000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine Performance Counters: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic counters: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose counters: 0 ... counter mask: 000000000000000f ACPI: Core revision 20090521 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6215.09 BogoMIPS (lpj=10355351) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 5 MCE banks x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 02 Brought up 2 CPUs Total of 2 processors activated (12430.32 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 node 0 link 0: io port [c000, ffff] TOM: 00000000d0000000 aka 3328M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [d0000000, fe02ffff] node 0 link 0: mmio [e0000000, efffffff] TOM2: 0000000130000000 aka 4864M bus: [00,03] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [d0000000, ffffffff] bus: 00 index 3 mmio: [130000000, fcffffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe029000-0xfe0290ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.1: reg 10 io port: [0x00-0x07] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe028000-0xfe028fff] pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 18 64bit mmio: [0xfdee0000-0xfdeeffff] pci 0000:01:00.0: reg 20 io port: [0xee00-0xeeff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 64bit mmio: [0xfdefc000-0xfdefffff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:02.0: bridge io port: [0xe000-0xefff] pci 0000:00:02.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:02:00.0: reg 10 io port: [0xde00-0xdeff] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdfff000-0xfdffffff] pci 0000:02:00.0: reg 20 64bit mmio: [0xfdfe0000-0xfdfeffff] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:0a.0: bridge io port: [0xd000-0xdfff] pci 0000:00:0a.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] pci 0000:03:06.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] pci 0000:03:06.2: reg 10 32bit mmio: [0xfa000000-0xfaffffff] pci 0000:03:07.0: reg 10 io port: [0xcf00-0xcf1f] pci 0000:03:07.0: reg 14 io port: [0xce00-0xce0f] pci 0000:03:07.0: reg 18 io port: [0xcd00-0xcd0f] pci 0000:03:07.0: reg 1c io port: [0xcc00-0xcc3f] pci 0000:03:07.0: supports D2 pci 0000:03:0e.0: reg 10 32bit mmio: [0xfcfff000-0xfcfff7ff] pci 0000:03:0e.0: reg 14 32bit mmio: [0xfcff8000-0xfcffbfff] pci 0000:03:0e.0: supports D1 D2 pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot pci 0000:03:0e.0: PME# disabled pci 0000:00:14.4: transparent bridge pci 0000:00:14.4: bridge io port: [0xc000-0xcfff] pci 0000:00:14.4: bridge 32bit mmio: [0xfa000000-0xfcffffff] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. PCI: Using ACPI for IRQ routing pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff] pci 0000:00:00.0: BAR 3: can't allocate resource NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture hpet: hpet2 irq 24 for MSI Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0b: mem resource (0xd1a00-0xd3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0b: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0b: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0b: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp 00:0b: mem resource (0x100000-0xcfddffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x220-0x225 has been reserved system 00:01: ioport range 0x290-0x294 has been reserved system 00:02: ioport range 0x4100-0x411f has been reserved system 00:02: ioport range 0x228-0x22f has been reserved system 00:02: ioport range 0x238-0x23f has been reserved system 00:02: ioport range 0x40b-0x40b has been reserved system 00:02: ioport range 0x4d6-0x4d6 has been reserved system 00:02: ioport range 0xc00-0xc01 has been reserved system 00:02: ioport range 0xc14-0xc14 has been reserved system 00:02: ioport range 0xc50-0xc52 has been reserved system 00:02: ioport range 0xc6c-0xc6d has been reserved system 00:02: ioport range 0xc6f-0xc6f has been reserved system 00:02: ioport range 0xcd0-0xcd1 has been reserved system 00:02: ioport range 0xcd2-0xcd3 has been reserved system 00:02: ioport range 0xcd4-0xcdf has been reserved system 00:02: ioport range 0x4000-0x40fe has been reserved system 00:02: ioport range 0x4210-0x4217 has been reserved system 00:02: ioport range 0xb00-0xb0f has been reserved system 00:02: ioport range 0xb10-0xb1f has been reserved system 00:02: ioport range 0xb20-0xb3f has been reserved system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved system 00:0b: iomem range 0xcfde0000-0xcfdfffff could not be reserved system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0b: iomem range 0xfff80000-0xfffeffff has been reserved pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 pci 0000:00:02.0: IO window: 0xe000-0xefff pci 0000:00:02.0: MEM window: 0xfde00000-0xfdefffff pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 pci 0000:00:0a.0: IO window: 0xd000-0xdfff pci 0000:00:0a.0: MEM window: 0xfdc00000-0xfdcfffff pci 0000:00:0a.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 pci 0000:00:14.4: IO window: 0xc000-0xcfff pci 0000:00:14.4: MEM window: 0xfa000000-0xfcffffff pci 0000:00:14.4: PREFETCH window: 0xfdd00000-0xfddfffff pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:0a.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] pci_bus 0000:02: resource 1 mem: [0xfdc00000-0xfdcfffff] pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] pci_bus 0000:03: resource 1 mem: [0xfa000000-0xfcffffff] pci_bus 0000:03: resource 2 pref mem [0xfdd00000-0xfddfffff] pci_bus 0000:03: resource 3 io: [0x00-0xffff] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 1792k freed Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1259070572.456:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7916 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:13.0: OHCI: BIOS handoff failed (BIOS bug?) 00000184 pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:02.0: setting latency timer to 64 pcieport-driver 0000:00:0a.0: irq 26 for MSI/MSI-X pcieport-driver 0000:00:0a.0: setting latency timer to 64 Linux agpgart interface v0.103 vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010100000, using 10240k, total 16384k vesafb: mode is 1280x1024x32, linelength=5120, pages=2 vesafb: scrolling: redraw vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 Console: switching to colour frame buffer device 160x64 fbcondecor: console 0 using theme 'archtux' fbcondecor: switched decor state to 'on' on console 0 fb0: VESA VGA frame buffer device Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 472k freed SCSI subsystem initialized input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 libata version 3.00 loaded. ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 22 ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata1: softreset failed (device not ready) ata1: applying SB600 PMP SRST workaround and retrying ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: HPA detected: current 1953523055, native 1953525168 ata1.00: ATA-8: WDC WD10EACS-00D6B0, 01.01A01, max UDMA/133 ata1.00: 1953523055 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD10EACS-00D 01.0 PQ: 0 ANSI: 5 ata2: softreset failed (device not ready) ata2: applying SB600 PMP SRST workaround and retrying ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: PIONEER DVD-RW DVR-216D, 1.08, max UDMA/66 ata2.00: configured for UDMA/66 scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-216D 1.08 PQ: 0 ANSI: 5 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 sd 0:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 sda7 sda8 > sd 0:0:0:0: [sda] Attached SCSI disk usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 sr0: scsi3-mmc drive: 12x/12x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com usb 2-1: new high speed USB device using ehci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi6 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usb 4-2: new full speed USB device using ohci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice usb 4-3: new full speed USB device using ohci_hcd and address 3 usb 4-3: configuration #1 chosen from 1 choice scsi 6:0:0:0: Direct-Access 256MB 2.00 PQ: 0 ANSI: 2 usb-storage: device scan complete sd 6:0:0:0: [sdb] 505856 512-byte logical blocks: (258 MB/247 MiB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] Attached SCSI removable disk padlock: VIA PadLock not detected. Intel AES-NI instructions are not detected. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram, hpet irqs udev: starting version 146 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:02:00.0: setting latency timer to 64 r8169 0000:02:00.0: irq 27 for MSI/MSI-X eth0: RTL8168c/8111c at 0xffffc90000038000, 00:1f:d0:b4:a6:cd, XID 3c4000c0 IRQ 27 EDAC MC: Ver: 2.1.0 Nov 14 2009 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 sd 6:0:0:0: Attached scsi generic sg2 type 0 EDAC amd64_edac: Ver: 3.2.0 Nov 14 2009 EDAC amd64: This node reports that Memory ECC is currently disabled. EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. Might be a BIOS bug, if BIOS says ECC is enabled Use of the override can cause unknown side effects. amd64_edac: probe of 0000:00:18.2 failed with error -22 ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Uniform Multi-Platform E-IDE driver atiixp 0000:00:14.1: IDE controller (0x1002:0x439c rev 0x00) ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 atiixp 0000:00:14.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfa00-0xfa07 atiixp 0000:00:14.1: simplex device: DMA disabled ide1: DMA disabled Probing IDE interface ide0... processor LNXCPU:00: registered as cooling_device0 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 ACPI: Power Button [PWRB] processor LNXCPU:01: registered as cooling_device1 [drm] Initialized drm 1.1.0 20060810 [drm] VGACON disable radeon kernel modesetting. ACPI: WMI: Mapper loaded ohci1394 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:01:00.0: setting latency timer to 64 [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fcfff000-fcfff7ff] Max Packet=[2048] IR/IT contexts=[4/8] ICE1712 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x17 (3100 MHz), vid 0x7 powernow-k8: 1 : fid 0x16 (3000 MHz), vid 0x8 powernow-k8: 2 : fid 0x14 (2800 MHz), vid 0xa powernow-k8: 3 : fid 0x12 (2600 MHz), vid 0xc powernow-k8: 4 : fid 0x10 (2400 MHz), vid 0xe powernow-k8: 5 : fid 0xe (2200 MHz), vid 0x10 powernow-k8: 6 : fid 0xc (2000 MHz), vid 0x10 powernow-k8: 7 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 8 : fid 0x2 (1000 MHz), vid 0x12 Linux video capture interface: v2.00 cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded cx88[0]: subsystem: 153b:1166, board: TerraTec Cinergy 1400 DVB-T [card=30,autodetected], frontend(s): 1 cx88[0]: TV tuner type 4, Radio tuner type 0 cx88/0: cx2388x v4l2 driver version 0.0.7 loaded Probing IDE interface ide1... ide1: no devices on the port ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 input: cx88 IR (TerraTec Cinergy 1400 as /devices/pci0000:00/0000:00:14.4/0000:03:06.2/input/input4 cx88[0]/2: cx2388x 8802 Driver Manager cx88-mpeg driver manager 0000:03:06.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20 cx88[0]/2: found at 0000:03:06.2, rev: 5, irq: 20, latency: 32, mmio: 0xfa000000 IRQ 20/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs cx8800 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 cx88[0]/0: found at 0000:03:06.0, rev: 5, irq: 20, latency: 32, mmio: 0xfb000000 IRQ 20/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5 cx88/2: cx2388x dvb driver version 0.0.7 loaded cx88/2: registering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: 153b:1166, board: TerraTec Cinergy 1400 DVB-T [card=30] cx88[0]/2: cx2388x based DVB/ATSC card cx8802_alloc_frontends() allocating 1 frontend(s) DVB: registering new adapter (cx88[0]) DVB: registering adapter 0 frontend 0 (Conexant CX22702 DVB-T)... ieee1394: Host added: ID:BUS[0-00:1023] GUID[0067308f00001d7d] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on dm-0, internal journal EXT2-fs warning (device sda5): ext2_fill_super: mounting ext3 filesystem as ext2 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with writeback data mode. Adding 1058228k swap on /dev/mapper/swap. Priority:-1 extents:1 across:1058228k