Linux version 2.6.30-ARCH (root@LX-Laptop) (gcc version 4.4.0 20090526 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jun 19 21:25:17 UTC 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
 BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000d7f90000 (usable)
 BIOS-e820: 00000000d7f90000 - 00000000d7f9e000 (ACPI data)
 BIOS-e820: 00000000d7f9e000 - 00000000d7fe0000 (ACPI NVS)
 BIOS-e820: 00000000d7fe0000 - 00000000d7fee000 (reserved)
 BIOS-e820: 00000000d7ff0000 - 00000000d8000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000128000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0xd7f90 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 base 0000D0000000 mask FFFFF8000000 write-back
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000128000000 aka 4736M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d8000000 - 0000000100000000 (usable) ==> (reserved)
Scanning 0 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 000000000009dc00 (usable)
 modified: 000000000009dc00 - 00000000000a0000 (reserved)
 modified: 00000000000e3000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 00000000d7f90000 (usable)
 modified: 00000000d7f90000 - 00000000d7f9e000 (ACPI data)
 modified: 00000000d7f9e000 - 00000000d7fe0000 (ACPI NVS)
 modified: 00000000d7fe0000 - 00000000d7fee000 (reserved)
 modified: 00000000d7ff0000 - 00000000d8000000 (reserved)
 modified: 00000000fec00000 - 00000000fec01000 (reserved)
 modified: 00000000fee00000 - 00000000fef00000 (reserved)
 modified: 00000000fff00000 - 0000000100000000 (reserved)
 modified: 0000000100000000 - 0000000128000000 (usable)
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 7ff2e000 - 7ffef14a
Allocated new RAMDISK: 0062a000 - 006eb14a
Move RAMDISK from 000000007ff2e000 - 000000007ffef149 to 0062a000 - 006eb149
ACPI: RSDP 000fb6b0 00024 (v02 ACPIAM)
ACPI: XSDT d7f90100 00064 (v01 052509 XSDT1039 20090525 MSFT 00000097)
ACPI: FACP d7f90290 000F4 (v03 052509 FACP1039 20090525 MSFT 00000097)
ACPI: DSDT d7f90450 0AA8D (v01  A1043 A1043000 00000000 INTL 20060113)
ACPI: FACS d7f9e000 00040
ACPI: APIC d7f90390 00080 (v01 052509 APIC1039 20090525 MSFT 00000097)
ACPI: MCFG d7f90410 0003C (v01 052509 OEMMCFG  20090525 MSFT 00000097)
ACPI: OEMB d7f9e040 00072 (v01 052509 OEMB1039 20090525 MSFT 00000097)
ACPI: HPET d7f9aee0 00038 (v01 052509 OEMHPET0 20090525 MSFT 00000097)
ACPI: INFO d7f9e0c0 00124 (v01 052509 AMDINFO  20090525 MSFT 00000097)
ACPI: NVHD d7f9e1f0 00284 (v01 052509  NVHDCP  20090525 MSFT 00000097)
ACPI: SSDT d7f9af20 00544 (v01 A M I  POWERNOW 00000001 AMD  00000001)
ACPI: Local APIC address 0xfee00000
2567MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
  node 0 low ram: 00000000 - 377fe000
  node 0 bootmap 00011000 - 00017f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000100000 - 0000626e44]    TEXT DATA BSS ==> [0000100000 - 0000626e44]
  #4 [000009dc00 - 0000100000]    BIOS reserved ==> [000009dc00 - 0000100000]
  #5 [0000627000 - 000062922c]              BRK ==> [0000627000 - 000062922c]
  #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
  #7 [000062a000 - 00006eb14a]      NEW RAMDISK ==> [000062a000 - 00006eb14a]
  #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00ff780] ff780
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x000d7f90
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x000d7f90
On node 0 totalpages: 884509
free_area_init_node: node 0, pgdat c04c2380, node_mem_map c1000200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3949 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 5136 pages used for memmap
  HighMem zone: 652162 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
Allocating PCI resources starting at dc000000 (gap: d8000000:26c00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 11 pages at c2b10000, static data 24444 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 877597
Kernel command line: root=/dev/disk/by-uuid/f698c131-f960-4673-b16f-aaeb4a5f3a1e ro vga=733
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
NR_IRQS:512
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2199.836 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (000377fe:000d7f90)
Memory: 3502388k/3538496k available (2902k kernel code, 34772k reserved, 1051k data, 392k init, 2629192k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc04e3000 - 0xc0545000   ( 392 kB)
      .data : 0xc03d599f - 0xc04dc6a8   (1051 kB)
      .text : 0xc0100000 - 0xc03d599f   (2902 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4401.99 BogoMIPS (lpj=7332786)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using C1E aware idle routine
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4401.49 BogoMIPS (lpj=7333592)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
System has AMD C1E enabled
Booting processor 2 APIC 0x2 ip 0x6000
Switch to broadcast mode on CPU1
Initializing CPU#2
Calibrating delay using timer specific routine.. 4401.38 BogoMIPS (lpj=7333419)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Switch to broadcast mode on CPU2
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 4401.39 BogoMIPS (lpj=7333426)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Switch to broadcast mode on CPU3
Total of 4 processors activated (17606.26 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-3 level CPU
  groups: 0 1 2 3
CPU1 attaching sched-domain:
 domain 0: span 0-3 level CPU
  groups: 1 2 3 0
CPU2 attaching sched-domain:
 domain 0: span 0-3 level CPU
  groups: 2 3 0 1
CPU3 attaching sched-domain:
 domain 0: span 0-3 level CPU
  groups: 3 0 1 2
Switch to broadcast mode on CPU0
net_namespace: 1056 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - FD, should be F5 [20090320]
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff]
pci 0000:00:01.1: reg 10 io port: [0xe00-0xe3f]
pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:01.3: reg 10 32bit mmio: [0xf7e80000-0xf7efffff]
pci 0000:00:02.0: reg 10 32bit mmio: [0xf7e7e000-0xf7e7efff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xf7e7fc00-0xf7e7fcff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: reg 10 32bit mmio: [0xf7e7d000-0xf7e7dfff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:04.1: reg 10 32bit mmio: [0xf7e7f800-0xf7e7f8ff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: PME# disabled
pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:09.0: reg 10 io port: [0xd480-0xd487]
pci 0000:00:09.0: reg 14 io port: [0xd400-0xd403]
pci 0000:00:09.0: reg 18 io port: [0xd080-0xd087]
pci 0000:00:09.0: reg 1c io port: [0xd000-0xd003]
pci 0000:00:09.0: reg 20 io port: [0xcc00-0xcc0f]
pci 0000:00:09.0: reg 24 32bit mmio: [0xf7e7a000-0xf7e7bfff]
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:01:06.0: reg 10 io port: [0xe800-0xe8ff]
pci 0000:01:06.0: reg 14 32bit mmio: [0xf7fffc00-0xf7fffcff]
pci 0000:01:06.0: reg 30 32bit mmio: [0xf7fe0000-0xf7feffff]
pci 0000:01:06.0: supports D1 D2
pci 0000:01:06.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:06.0: PME# disabled
pci 0000:01:07.0: reg 10 io port: [0xec00-0xec1f]
pci 0000:01:07.0: supports D1 D2
pci 0000:00:08.0: transparent bridge
pci 0000:00:08.0: bridge io port: [0xe000-0xefff]
pci 0000:00:08.0: bridge 32bit mmio: [0xf7f00000-0xf7ffffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
pci 0000:02:00.0: reg 14 64bit mmio: [0xd8000000-0xdfffffff]
pci 0000:02:00.0: reg 1c 64bit mmio: [0xfd000000-0xfdffffff]
pci 0000:02:00.0: reg 30 32bit mmio: [0xfeae0000-0xfeafffff]
pci 0000:00:10.0: bridge 32bit mmio: [0xf8000000-0xfeafffff]
pci 0000:00:10.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *15
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15
ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:05: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
pnp 00:05: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: ioport range 0x4d0-0x4d1 has been reserved
system 00:05: ioport range 0x800-0x80f has been reserved
system 00:05: ioport range 0x500-0x57f has been reserved
system 00:05: ioport range 0x580-0x5ff has been reserved
system 00:05: ioport range 0x800-0x87f could not be reserved
system 00:05: ioport range 0x880-0x8ff has been reserved
system 00:05: ioport range 0xd00-0xd7f has been reserved
system 00:05: ioport range 0xd80-0xdff has been reserved
system 00:05: iomem range 0xfed04000-0xfed04fff has been reserved
system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved
system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:09: ioport range 0x230-0x23f has been reserved
system 00:09: ioport range 0x290-0x29f has been reserved
system 00:09: ioport range 0xa00-0xa0f has been reserved
system 00:09: ioport range 0xa10-0xa1f has been reserved
system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0b: iomem range 0x0-0x9ffff could not be reserved
system 00:0b: iomem range 0xc0000-0xcffff could not be reserved
system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
system 00:0b: iomem range 0x100000-0xd7ffffff could not be reserved
system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved
pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
pci 0000:00:08.0:   IO window: 0xe000-0xefff
pci 0000:00:08.0:   MEM window: 0xf7f00000-0xf7ffffff
pci 0000:00:08.0:   PREFETCH window: 0x000000f0000000-0x000000f00fffff
pci 0000:00:10.0: PCI bridge, secondary bus 0000:02
pci 0000:00:10.0:   IO window: disabled
pci 0000:00:10.0:   MEM window: 0xf8000000-0xfeafffff
pci 0000:00:10.0:   PREFETCH window: 0x000000d8000000-0x000000dfffffff
pci 0000:00:12.0: PCI bridge, secondary bus 0000:03
pci 0000:00:12.0:   IO window: disabled
pci 0000:00:12.0:   MEM window: disabled
pci 0000:00:12.0:   PREFETCH window: disabled
pci 0000:00:08.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:10.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:12.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0xe000-0xefff]
pci_bus 0000:01: resource 1 mem: [0xf7f00000-0xf7ffffff]
pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf00fffff]
pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfeafffff]
pci_bus 0000:02: resource 2 pref mem [0xd8000000-0xdfffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 772k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1246889174.614:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1708
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:08.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Enabling HT MSI Mapping
pci 0000:02:00.0: Boot video device
pcieport-driver 0000:00:10.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:10.0: setting latency timer to 64
pcieport-driver 0000:00:12.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:12.0: setting latency timer to 64
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 392k freed
SCSI subsystem initialized
libata version 3.00 loaded.
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ahci 0000:00:09.0: version 3.0
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
ahci 0000:00:09.0: irq 26 for MSI/MSI-X
ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio 
ahci 0000:00:09.0: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m8192@0xf7e7a000 port 0xf7e7a100 irq 26
ata4: SATA max UDMA/133 abar m8192@0xf7e7a000 port 0xf7e7a180 irq 26
ata5: SATA max UDMA/133 abar m8192@0xf7e7a000 port 0xf7e7a200 irq 26
ata6: SATA max UDMA/133 abar m8192@0xf7e7a000 port 0xf7e7a280 irq 26
ata7: SATA max UDMA/133 abar m8192@0xf7e7a000 port 0xf7e7a300 irq 26
ata8: SATA max UDMA/133 abar m8192@0xf7e7a000 port 0xf7e7a380 irq 26
CE: hpet increasing min_delta_ns to 15000 nsec
FDC 0 is a post-1991 82077
ata1.01: ATAPI: ASUS    DRW-1814BL, 1.13, max UDMA/66
ata1: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc50000) ACPI=0x1f01f (900:30:0x14)
ata1.01: configured for UDMA/66
scsi 0:0:1:0: CD-ROM            ASUS     DRW-1814BL       1.13 PQ: 0 ANSI: 5
ata2: port disabled. ignoring.
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: ST3500320NS, SN05, max UDMA/133
ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      ST3500320NS      SN05 PQ: 0 ANSI: 5
ata5.00: ATA-7: ST3200827AS, 3.AAE, max UDMA/133
ata5.00: 390721968 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      ST3200827AS      3.AA PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdb] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb:<6> sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
 sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
sd 4:0:0:0: [sdb] Attached SCSI disk
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
EXT3-fs: sda1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 114683
EXT3-fs: sda1: 1 orphan inode deleted
EXT3-fs: recovery complete.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
udev: starting version 141
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
processor ACPI_CPU:01: registered as cooling_device1
processor ACPI_CPU:02: registered as cooling_device2
processor ACPI_CPU:03: registered as cooling_device3
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 22, io mem 0xf7e7fc00
input: PC Speaker as /devices/platform/pcspkr/input/input3
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:04.1: setting latency timer to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:04.1: debug port 1
ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
ehci_hcd 0000:00:04.1: irq 21, io mem 0xf7e7f800
sr 0:0:1:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:01:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17
8139too 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 17 (level, low) -> IRQ 17
eth0: RealTek RTL8139 at 0xf8506c00, 00:80:48:54:16:c1, IRQ 17
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.0: irq 20, io mem 0xf7e7e000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:04.0: setting latency timer to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:04.0: irq 23, io mem 0xf7e7d000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 16
CA0106 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 16 (level, low) -> IRQ 16
snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
usb 1-2: new high speed USB device using ehci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 2-3: new high speed USB device using ehci_hcd and address 3
usb 2-3: configuration #1 chosen from 1 choice
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 3 ports detected
EXT3 FS on sda1, internal journal
hub 2-3:1.0: hub_port_status failed (err = -71)
hub 2-3:1.0: hub_port_status failed (err = -71)
hub 2-3:1.0: hub_port_status failed (err = -71)
usb 4-1: new full speed USB device using ohci_hcd and address 2
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
EXT4-fs: barriers enabled
kjournald2 starting: pid 1627, dev sda3:8, commit interval 5 seconds
EXT4 FS on sda3, internal journal on sda3:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
usb 4-1: configuration #1 chosen from 1 choice
usb 2-3: USB disconnect, address 3
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda3 with ordered data mode
usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
usbcore: registered new interface driver usblp
EXT4-fs: barriers enabled
kjournald2 starting: pid 1652, dev sda2:8, commit interval 5 seconds
EXT4 FS on sda2, internal journal on sda2:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda2 with ordered data mode
EXT4-fs: barriers enabled
kjournald2 starting: pid 1653, dev sdb3:8, commit interval 5 seconds
EXT4 FS on sdb3, internal journal on sdb3:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sdb3 with ordered data mode
EXT4-fs: barriers enabled
kjournald2 starting: pid 1654, dev sdb6:8, commit interval 5 seconds
EXT4 FS on sdb6, internal journal on sdb6:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sdb6 with ordered data mode
EXT4-fs: barriers enabled
kjournald2 starting: pid 1655, dev sdb5:8, commit interval 5 seconds
EXT4 FS on sdb5, internal journal on sdb5:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sdb5 with ordered data mode
Adding 4000176k swap on /dev/sdb2.  Priority:-1 extents:1 across:4000176k 
usb 2-3: new high speed USB device using ehci_hcd and address 4
usb 2-3: configuration #1 chosen from 1 choice
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 3 ports detected
usb 2-3.2: new low speed USB device using ehci_hcd and address 5
usb 2-3.2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:04.1/usb2/2-3/2-3.2/2-3.2:1.0/input/input4
apple 0003:05AC:0221.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:04.1-3.2/input0
input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:04.1/usb2/2-3/2-3.2/2-3.2:1.1/input/input5
apple 0003:05AC:0221.0002: input,hidraw1: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:04.1-3.2/input1
usb 2-3.3: new low speed USB device using ehci_hcd and address 6
usb 2-3.3: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb2/2-3/2-3.3/2-3.3:1.0/input/input6
generic-usb 0003:046D:C501.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:04.1-3.3/input0
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
scsi 8:0:0:0: Direct-Access     S-Line   S2 Portable           PQ: 0 ANSI: 2 CCS
sd 8:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
sd 8:0:0:0: [sdc] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 34 00 00 00
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 8:0:0:0: [sdc] Attached SCSI disk
ip_tables: (C) 2000-2006 Netfilter Core Team
PPP generic driver version 2.4.2
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
NTFS driver 2.1.29 [Flags: R/W MODULE].
NTFS volume version 3.1.
Linux agpgart interface v0.103
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
nvidia 0000:02:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.14  Wed May 27 02:23:13 PDT 2009
fuse init (API version 7.11)
i2c /dev entries driver
it87: Found IT8712F chip at 0x290, revision 8
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
CE: hpet increasing min_delta_ns to 22500 nsec
CE: hpet increasing min_delta_ns to 33750 nsec
usb 1-2: USB disconnect, address 3
usb 1-2: new high speed USB device using ehci_hcd and address 4
usb 1-2: configuration #1 chosen from 1 choice
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
scsi 9:0:0:0: Direct-Access     S-Line   S2 Portable           PQ: 0 ANSI: 2 CCS
sd 9:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
sd 9:0:0:0: [sdc] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 9:0:0:0: [sdc] Write Protect is off
sd 9:0:0:0: [sdc] Mode Sense: 34 00 00 00
sd 9:0:0:0: [sdc] Assuming drive cache: write through
sd 9:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 9:0:0:0: [sdc] Attached SCSI disk
