Linux version 2.6.30-ARCH (root@LX-Laptop) (gcc version 4.4.0 20090526 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jun 19 21:25:17 UTC 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ff60000 (usable) BIOS-e820: 000000003ff60000 - 000000003ff77000 (ACPI data) BIOS-e820: 000000003ff77000 - 000000003ff79000 (ACPI NVS) BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x3ff60 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DBFFF uncachable DC000-DFFFF write-back E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FC0000000 write-back 1 base 03FF80000 mask FFFF80000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled PAT not supported by CPU. e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000002000 (usable) modified: 0000000000002000 - 0000000000006000 (reserved) modified: 0000000000006000 - 000000000009f000 (usable) modified: 000000000009f000 - 00000000000a0000 (reserved) modified: 00000000000d2000 - 00000000000d4000 (reserved) modified: 00000000000dc000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000003ff60000 (usable) modified: 000000003ff60000 - 000000003ff77000 (ACPI data) modified: 000000003ff77000 - 000000003ff79000 (ACPI NVS) modified: 000000003ff80000 - 0000000040000000 (reserved) modified: 00000000ff800000 - 0000000100000000 (reserved) init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 RAMDISK: 3fec2000 - 3ff4fb3f Allocated new RAMDISK: 00008000 - 00095b3f Move RAMDISK from 000000003fec2000 - 000000003ff4fb3e to 00008000 - 00095b3e ACPI: RSDP 000f6d70 00024 (v02 IBM ) ACPI: XSDT 3ff6a672 0004C (v01 IBM TP-1R 00003230 LTP 00000000) ACPI: FACP 3ff6a700 000F4 (v03 IBM TP-1R 00003230 IBM 00000001) ACPI Warning (tbfadt-0531): 32/64X length mismatch in Gpe1Block: 0/32 [20090320] ACPI Warning (tbfadt-0562): Optional field Gpe1Block has zero address or length: 000000000000102C/0 [20090320] ACPI: DSDT 3ff6a8e7 0C530 (v01 IBM TP-1R 00003230 MSFT 0100000E) ACPI: FACS 3ff78000 00040 ACPI: SSDT 3ff6a8b4 00033 (v01 IBM TP-1R 00003230 MSFT 0100000E) ACPI: ECDT 3ff76e17 00052 (v01 IBM TP-1R 00003230 IBM 00000001) ACPI: TCPA 3ff76e69 00032 (v01 IBM TP-1R 00003230 PTL 00000001) ACPI: BOOT 3ff76fd8 00028 (v01 IBM TP-1R 00003230 LTP 00000001) 135MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00096000 - 0009cf00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 0000626e44] TEXT DATA BSS ==> [0000100000 - 0000626e44] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #5 [0000627000 - 0000629128] BRK ==> [0000627000 - 0000629128] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [0000008000 - 0000095b3f] NEW RAMDISK ==> [0000008000 - 0000095b3f] #8 [0000096000 - 000009d000] BOOTMAP ==> [0000096000 - 000009d000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0003ff60 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x00000002 0: 0x00000006 -> 0x0000009f 0: 0x00000100 -> 0x0003ff60 On node 0 totalpages: 261883 free_area_init_node: node 0, pgdat c04c2380, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3963 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 271 pages used for memmap HighMem zone: 34387 pages, LIFO batch:7 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 SMP: Allowing 1 CPUs, 0 hotplug CPUs Local APIC disabled by BIOS -- you can enable it with "lapic" nr_irqs_gsi: 16 PM: Registered nosave memory: 0000000000002000 - 0000000000006000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:bf800000) NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 PERCPU: Embedded 11 pages at c1806000, static data 24444 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259836 Kernel command line: root=/dev/sda2 ro vga=775 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 NR_IRQS:512 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1793.940 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing HighMem for node 0 (000377fe:0003ff60) Memory: 1032288k/1047936k available (2902k kernel code, 14940k reserved, 1051k data, 392k init, 138632k highmem) virtual kernel memory layout: fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc04e3000 - 0xc0545000 ( 392 kB) .data : 0xc03d599f - 0xc04dc6a8 (1051 kB) .text : 0xc0100000 - 0xc03d599f (2902 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 3589.37 BogoMIPS (lpj=5979800) Security Framework initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 10k freed ACPI: Core revision 20090320 ACPI: setting ELCR to 0200 (from 0800) weird, boot CPU (#0) not listed by the BIOS. SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. SMP disabled Brought up 1 CPUs Total of 1 processors activated (3589.37 BogoMIPS). CPU0 attaching NULL sched-domain. net_namespace: 1056 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: EC description table is found, configuring boot EC ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: Power Resource [PUBS] (on) ACPI: ACPI Dock Station Driver: 3 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xc0000000-0xc00003ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff] pci 0000:00:1f.5: reg 18 32bit mmio: [0xc0000c00-0xc0000dff] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xc0000800-0xc00008ff] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold pci 0000:00:1f.5: PME# disabled pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold pci 0000:00:1f.6: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xc0100000-0xc010ffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x3000-0x3fff] pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff] pci 0000:02:00.0: reg 10 32bit mmio: [0xb0000000-0xb0000fff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:00.1: reg 10 32bit mmio: [0xb1000000-0xb1000fff] pci 0000:02:00.1: supports D1 D2 pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.1: PME# disabled pci 0000:02:01.0: reg 10 32bit mmio: [0xc0220000-0xc023ffff] pci 0000:02:01.0: reg 14 32bit mmio: [0xc0200000-0xc020ffff] pci 0000:02:01.0: reg 18 io port: [0x8000-0x803f] pci 0000:02:01.0: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold pci 0000:02:01.0: PME# disabled pci 0000:02:02.0: reg 10 32bit mmio: [0xc0214000-0xc0214fff] pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x4000-0x8fff] pci 0000:00:1e.0: bridge 32bit mmio: [0xc0200000-0xcfffffff] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff could not be reserved system 00:00: iomem range 0xc4000-0xc7fff could not be reserved system 00:00: iomem range 0xc8000-0xcbfff could not be reserved system 00:00: iomem range 0xcc000-0xcffff could not be reserved system 00:00: iomem range 0xd0000-0xd3fff could not be reserved system 00:00: iomem range 0xdc000-0xdffff could not be reserved system 00:00: iomem range 0xe0000-0xe3fff could not be reserved system 00:00: iomem range 0xe4000-0xe7fff could not be reserved system 00:00: iomem range 0xe8000-0xebfff could not be reserved system 00:00: iomem range 0xec000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x3fffffff could not be reserved system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11bf has been reserved system 00:02: ioport range 0x15e0-0x15ef has been reserved system 00:02: ioport range 0x1600-0x162f has been reserved system 00:02: ioport range 0x1632-0x167f has been reserved system 00:02: ioport range 0x1630-0x1631 has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x3000-0x3fff pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000e7ffffff pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03 pci 0000:02:00.0: IO window: 0x004000-0x0040ff pci 0000:02:00.0: IO window: 0x004400-0x0044ff pci 0000:02:00.0: PREFETCH window: 0xe8000000-0xebffffff pci 0000:02:00.0: MEM window: 0xc4000000-0xc7ffffff pci 0000:02:00.1: CardBus bridge, secondary bus 0000:07 pci 0000:02:00.1: IO window: 0x004800-0x0048ff pci 0000:02:00.1: IO window: 0x004c00-0x004cff pci 0000:02:00.1: PREFETCH window: 0xec000000-0xefffffff pci 0000:02:00.1: MEM window: 0xc8000000-0xcbffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0x4000-0x8fff pci 0000:00:1e.0: MEM window: 0xc0200000-0xcfffffff pci 0000:00:1e.0: PREFETCH window: 0x000000e8000000-0x000000efffffff pci 0000:00:1e.0: setting latency timer to 64 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff] pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff] pci_bus 0000:02: resource 0 io: [0x4000-0x8fff] pci_bus 0000:02: resource 1 mem: [0xc0200000-0xcfffffff] pci_bus 0000:02: resource 2 pref mem [0xe8000000-0xefffffff] pci_bus 0000:02: resource 3 io: [0x00-0xffff] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] pci_bus 0000:03: resource 0 io: [0x4000-0x40ff] pci_bus 0000:03: resource 1 io: [0x4400-0x44ff] pci_bus 0000:03: resource 2 pref mem [0xe8000000-0xebffffff] pci_bus 0000:03: resource 3 mem: [0xc4000000-0xc7ffffff] pci_bus 0000:07: resource 0 io: [0x4800-0x48ff] pci_bus 0000:07: resource 1 io: [0x4c00-0x4cff] pci_bus 0000:07: resource 2 pref mem [0xec000000-0xefffffff] pci_bus 0000:07: resource 3 mem: [0xc8000000-0xcbffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 566k freed Simple Boot Flag at 0x35 set to 0x1 IBM machine detected. Enabling interrupts during APM calls. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1245851078.150:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1747 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 2560k, total 131008k vesafb: mode is 1280x1024x8, linelength=1280, pages=101 vesafb: protected mode interface info at c000:5a29 vesafb: pmi: set display start = c00c5a97, set palette = c00c5ad1 vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4 vesafb: scrolling: redraw vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial 00:09: activated 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 serial 0000:00:1f.6: PCI INT B disabled input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 392k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 Switched to high resolution mode on CPU 0 SCSI subsystem initialized libata version 3.00 loaded. ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15 ata1.00: ATA-6: HTS721010G9AT00, MCZOA51A, max UDMA/100 ata1.00: 195371568 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA HTS721010G9AT00 MCZO PQ: 0 ANSI: 5 ata2.00: ATAPI: MATSHITADVD-RAM UJ-822S, 1.03, max UDMA/33 ata2.00: configured for UDMA/33 scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-822S 1.03 PQ: 0 ANSI: 5 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with writeback data mode. rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram udev: starting version 141 Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000 0000:02:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:11:25:48:73:e3 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 ipw2100: Copyright(c) 2003-2006 Intel Corporation ipw2100 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 ipw2100: Detected Intel PRO/Wireless 2100 Network Connection ipw2100 0000:02:02.0: firmware: requesting ipw2100-1.3.fw Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Intel ICH 0000:00:1f.5: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 52765 usecs (2542 samples) intel8x0: clocking to 48000 Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 Intel ICH Modem 0000:00:1f.6: setting latency timer to 64 MC'97 1 converters and GPIO not ready (0xff00) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU] (supports 8 throttling states) P-state transition latency capped at 20 uS ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 ACPI: Sleep Button [SLPB] thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (43 C) input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/device:03/input/input5 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected intel_rng: FWH not detected Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 855PM Chipset NET: Registered protocol family 23 input: PC Speaker as /devices/platform/pcspkr/input/input6 uhci_hcd: USB Universal Host Controller Interface driver parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) lp: driver loaded but no devices found agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected lp0: using parport0 (interrupt-driven). nsc-ircc 00:0b: activated nsc-ircc, chip->init nsc-ircc, Found chip at base=0x02e nsc-ircc, driver loaded (Dag Brattli) IrDA: Registered device irda0 nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ppdev: user-space parallel port driver thinkpad_acpi: ThinkPad ACPI Extras v0.23 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 1RETDRWW (3.23 ), EC 1RHT71WW-3.04 thinkpad_acpi: IBM ThinkPad T42p, model 2373HTU Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi::standby input: ThinkPad Extra Buttons as /devices/virtual/input/input7 yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0552] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21b22, devctl 0x64 yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0470, PCI irq 11 yenta_cardbus 0000:02:00.0: Socket status: 30000086 yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: clean. yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0552] yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21b22, devctl 0x64 Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x0470, PCI irq 11 yenta_cardbus 0000:02:00.1: Socket status: 30000086 yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff: clean. yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. Clocksource tsc unstable (delta = -166765786 ns) EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda4, internal journal EXT3-fs: mounted filesystem with writeback data mode. Adding 1052248k swap on /dev/sda3. Priority:-1 extents:1 across:1052248k psmouse serio2: ID: 10 00 64 IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9 pci 0000:01:00.0: power state changed by ACPI to D0 pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized drm 1.1.0 20060810 [drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0 agpgart-intel 0000:00:00.0: AGP 2.0 bridge agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode pci 0000:01:00.0: putting AGP V2 device into 2x mode [drm] Setting GART location based on new memory map [drm] Loading R300 Microcode [drm] Num pipes: 1 [drm] writeback test succeeded in 1 usecs lib80211_crypt: registered algorithm 'CCMP' padlock: VIA PadLock not detected. lib80211_crypt: registered algorithm 'TKIP' fuse init (API version 7.11) NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready eth1: no IPv6 routers present