BIOS EBDA/lowmem at: 00000000/000a0000 Linux version 2.6.28-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Mon Feb 2 22:22:59 UTC 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005ffec000 (usable) BIOS-e820: 000000005ffec000 - 000000005ffef000 (ACPI data) BIOS-e820: 000000005ffef000 - 000000005ffff000 (reserved) BIOS-e820: 000000005ffff000 - 0000000060000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) DMI 2.3 present. last_pfn = 0x5ffec max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Scanning 2 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000002000 (usable) modified: 0000000000002000 - 0000000000006000 (reserved) modified: 0000000000006000 - 0000000000007000 (usable) modified: 0000000000007000 - 0000000000010000 (reserved) modified: 0000000000010000 - 0000000000093000 (usable) modified: 00000000000f0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000005ffec000 (usable) modified: 000000005ffec000 - 000000005ffef000 (ACPI data) modified: 000000005ffef000 - 000000005ffff000 (reserved) modified: 000000005ffff000 - 0000000060000000 (ACPI NVS) modified: 00000000ffff0000 - 0000000100000000 (reserved) kernel direct mapping tables up to 377fe000 @ 10000-16000 RAMDISK: 5ff59000 - 5ffdbb6a Allocated new RAMDISK: 0055f000 - 005e1b6a Move RAMDISK from 000000005ff59000 - 000000005ffdbb69 to 0055f000 - 005e1b69 ACPI: RSDP 000F6C20, 0014 (r0 ASUS ) ACPI: RSDT 5FFEC000, 002C (r1 ASUS A7V266-C 30303031 MSFT 31313031) ACPI: FACP 5FFEC080, 0074 (r1 ASUS A7V266-C 30303031 MSFT 31313031) ACPI: DSDT 5FFEC100, 2398 (r1 ASUS A7V266-C 1000 MSFT 100000B) ACPI: FACS 5FFFF000, 0040 ACPI: BOOT 5FFEC040, 0028 (r1 ASUS A7V266-C 30303031 MSFT 31313031) 647MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 00000000 - 377fe000 bootmap 00012000 - 00018f00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 000055b520] TEXT DATA BSS ==> [0000100000 - 000055b520] #4 [000055c000 - 000055f000] INIT_PG_TABLE ==> [000055c000 - 000055f000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #7 [000055f000 - 00005e1b6a] NEW RAMDISK ==> [000055f000 - 00005e1b6a] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0005ffec Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x00000002 0: 0x00000006 -> 0x00000007 0: 0x00000010 -> 0x00000093 0: 0x00000100 -> 0x0005ffec On node 0 totalpages: 393074 free_area_init_node: node 0, pgdat c0406600, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3942 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 1296 pages used for memmap HighMem zone: 164574 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0xe408 SMP: Allowing 1 CPUs, 0 hotplug CPUs Local APIC disabled by BIOS -- you can enable it with "lapic" PM: Registered nosave memory: 0000000000002000 - 0000000000006000 PM: Registered nosave memory: 0000000000007000 - 0000000000010000 PM: Registered nosave memory: 0000000000093000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 70000000 (gap: 60000000:9fff0000) PERCPU: Allocating 36864 bytes of per cpu data NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390002 Kernel command line: root=/dev/disk/by-label/root vga=0x317 ro Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 1544.272 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Scanning for low memory corruption every 60 seconds Memory: 1553252k/1572784k available (2227k kernel code, 18188k reserved, 1026k data, 332k init, 663480k highmem) virtual kernel memory layout: fixmap : 0xffee8000 - 0xfffff000 (1116 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0433000 - 0xc0486000 ( 332 kB) .data : 0xc032cfd9 - 0xc042db5c (1026 kB) .text : 0xc0100000 - 0xc032cfd9 (2227 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 3089.23 BogoMIPS (lpj=5147573) Security Framework initialized Mount-cache hash table entries: 512 CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 9k freed ACPI: Core revision 20080926 ACPI: Checking initramfs for custom DSDT ACPI: setting ELCR to 0200 (from 1c10) weird, boot CPU (#0) not listedby the BIOS. SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. SMP disabled Brought up 1 CPUs Total of 1 processors activated (3089.23 BogoMIPS). net_namespace: 768 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0f00, last bus=1 PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using PIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff] pci 0000:00:01.0: supports D1 pci 0000:00:05.0: reg 10 io port: [0xd800-0xd8ff] pci 0000:00:05.0: supports D1 D2 pci 0000:00:0d.0: reg 10 io port: [0xd400-0xd4ff] pci 0000:00:0d.0: reg 14 32bit mmio: [0xed800000-0xed8000ff] pci 0000:00:0d.0: supports D1 D2 pci 0000:00:0d.0: PME# supported from D1 D2 D3hot D3cold pci 0000:00:0d.0: PME# disabled pci 0000:00:0f.0: reg 20 io port: [0xd000-0xd01f] pci 0000:00:0f.0: supports D1 D2 pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0f.0: PME# disabled pci 0000:00:0f.1: reg 20 io port: [0xb800-0xb81f] pci 0000:00:0f.1: supports D1 D2 pci 0000:00:0f.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0f.1: PME# disabled pci 0000:00:0f.2: reg 10 32bit mmio: [0xed000000-0xed0000ff] pci 0000:00:0f.2: supports D1 D2 pci 0000:00:0f.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0f.2: PME# disabled pci 0000:00:11.1: reg 20 io port: [0xb400-0xb40f] pci 0000:00:11.2: reg 20 io port: [0xb000-0xb01f] pci 0000:00:11.3: reg 20 io port: [0xa800-0xa81f] pci 0000:01:00.0: reg 10 32bit mmio: [0xee000000-0xeeffffff] pci 0000:01:00.0: reg 14 32bit mmio: [0xf0000000-0xf7ffffff] pci 0000:01:00.0: reg 30 32bit mmio: [0xeffe0000-0xefffffff] pci 0000:00:01.0: bridge 32bit mmio: [0xee000000-0xefefffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xeff00000-0xf7ffffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x5fffffff could not be reserved system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved system 00:02: ioport range 0x3f0-0x3f1 has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:03: ioport range 0xe400-0xe47f has been reserved system 00:03: ioport range 0xe800-0xe80f has been reserved system 00:03: ioport range 0x290-0x291 has been reserved system 00:03: ioport range 0x370-0x373 has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xee000000-0xefefffff pci 0000:00:01.0: PREFETCH window: 0x000000eff00000-0x000000f7ffffff pci 0000:00:01.0: setting latency timer to 64 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffff] bus: 01 index 0 mmio: [0x0-0x0] bus: 01 index 1 mmio: [0xee000000-0xefefffff] bus: 01 index 2 mmio: [0xeff00000-0xf7ffffff] bus: 01 index 3 mmio: [0x0-0x0] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 522k freed Simple Boot Flag at 0x3a set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1740 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: VIA PCI bridge detected.Disabling DAC. pci 0000:01:00.0: Boot video device vesafb: framebuffer at 0xf0000000, mapped to 0xf8080000, using 3072k, total 131072k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:def0 vesafb: pmi: set display start = c00cdf35, set palette = c00cdfba vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver4 ports, IRQ sharing disabled input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 IO APIC resources could be not be allocated. Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 332k freed SCSI subsystem initialized input: AT Translated Set 2 keyboard as /class/input/input1 libata version 3.00 loaded. ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pata_acpi 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 pata_acpi 0000:00:11.1: VIA VLink IRQ fixup, from 0 to 11 pata_acpi 0000:00:11.1: PCI INT A disabled pata_via 0000:00:11.1: version 0.3.3 pata_via 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 pata_via 0000:00:11.1: VIA VLink IRQ fixup, from 0 to 11 scsi0 : pata_via scsi1 : pata_via ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xb400 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xb408 irq 15 Switched to high resolution mode on CPU 0 ata1.00: ATA-6: WDC WD1600JB-00GVC0, 08.02D08, max UDMA/100 ata1.00: 312581808 sectors, multi 16: LBA48 ata1.01: ATA-5: WDC WD800JB-00CRA1, 17.07W17, max UDMA/100 ata1.01: 156301488 sectors, multi 16: LBA ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/100 ata2.00: ATAPI: LITE-ON LTR-48246S, SS0B, max UDMA/33 ata2.01: ATAPI: JLMS DVD-ROM LTD-166S, DS0B, max UDMA/44 ata2.00: configured for UDMA/33 ata2.01: configured for UDMA/44 scsi 0:0:0:0: Direct-Access ATA WDC WD1600JB-00G 08.0 PQ: 0 ANSI: 5 scsi 0:0:1:0: Direct-Access ATA WDC WD800JB-00CR 17.0 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM LITE-ON LTR-48246S SS0B PQ: 0 ANSI: 5 scsi 1:0:1:0: CD-ROM JLMS DVD-ROM LTD-166S DS0B PQ: 0 ANSI: 5 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off Driver 'sr' needs updating - please use bus_type methods sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 0:0:1:0: [sdb] Write Protect is off sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) sd 0:0:1:0: [sdb] Write Protect is off sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb:sr0: scsi3-mmc drive: 28x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sdb1 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray sr 1:0:1:0: Attached scsi CD-ROM sr1 sd 0:0:1:0: [sdb] Attached SCSI disk EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, 242 bytes nvram input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input3 ACPI: Power Button (CM) [PWRB] processor ACPI_CPU:00: registered as cooling_device0 Linux agpgart interface v0.103 agpgart: Detected VIA KT266/KY266x/KT333 chipset agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver input: PC Speaker as /class/input/input4 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 nvidia: module license 'NVIDIA' taints kernel. nvidia 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.09 Mon Oct 27 14:23:30 PST 2008 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered C-Media PCI 0000:00:05.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 Error: Driver 'pcspkr' is already registered, aborting... 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too 8139too Fast Ethernet driver 0.9.28 8139too 0000:00:0d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 eth0: RealTek RTL8139 at 0xf87e2000, 00:02:44:95:e8:c6, IRQ 11 eth0: Identified 8139 chip type 'RTL-8100B/8139D' NET: Registered protocol family 23 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:0f.2: PCI INT C -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:0f.2: EHCI Host Controller ehci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0f.2: irq 11, io mem 0xed000000 ehci_hcd 0000:00:0f.2: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected uhci_hcd: USB Universal Host Controller Interface driver ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered uhci_hcd 0000:00:0f.0: PCI INT A -> Link[LNKC] -> GSI 12 (level, low) -> IRQ 12 uhci_hcd 0000:00:0f.0: UHCI Host Controller uhci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:0f.0: irq 12, io base 0x0000d000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 4 PCI: setting IRQ 4 as level-triggered uhci_hcd 0000:00:0f.1: PCI INT B -> Link[LNKD] -> GSI 4 (level, low) -> IRQ 4 uhci_hcd 0000:00:0f.1: UHCI Host Controller uhci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:0f.1: irq 4, io base 0x0000b800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:11.2: PCI INT D -> Link[LNKD] -> GSI 4 (level, low) -> IRQ 4 uhci_hcd 0000:00:11.2: UHCI Host Controller uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:11.2: irq 4, io base 0x0000b000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:11.3: PCI INT D -> Link[LNKD] -> GSI 4 (level, low) -> IRQ 4 uhci_hcd 0000:00:11.3: UHCI Host Controller uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:11.3: irq 4, io base 0x0000a800 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:1:0: Attached scsi generic sg1 type 0 sr 1:0:0:0: Attached scsi generic sg2 type 5 sr 1:0:1:0: Attached scsi generic sg3 type 5 usb 3-1: new low speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice usb 4-2: new low speed USB device using uhci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input5 generic-usb 0003:046D:C00E.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:11.2-2/input0 EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2000052k swap on /dev/sda1. Priority:-1 extents:1 across:2000052k ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed logitech 0003:046D:C215.0001: timeout initializing reports input: Logitech Logitech Extreme 3D as /class/input/input6 logitech 0003:046D:C215.0001: input,hidraw1: USB HID v1.10 Joystick [Logitech Logitech Extreme 3D] on usb-0000:00:0f.1-1/input0 NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: no IPv6 routers present agpgart-via 0000:00:00.0: AGP 2.0 bridge agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode nvidia 0000:01:00.0: putting AGP V2 device into 4x mode spurious 8259A interrupt: IRQ7. usb 3-1: USB disconnect, address 2 usb 3-1: new low speed USB device using uhci_hcd and address 3 usb 3-1: configuration #1 chosen from 1 choice drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed logitech 0003:046D:C215.0003: timeout initializing reports input: Logitech Logitech Extreme 3D as /class/input/input7 logitech 0003:046D:C215.0003: input,hidraw1: USB HID v1.10 Joystick [Logitech Logitech Extreme 3D] on usb-0000:00:0f.1-1/input0 usb 3-1: USB disconnect, address 3 usb 3-1: new low speed USB device using uhci_hcd and address 4 usb 3-1: configuration #1 chosen from 1 choice drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed logitech 0003:046D:C215.0004: timeout initializing reports input: Logitech Logitech Extreme 3D as /class/input/input8 logitech 0003:046D:C215.0004: input,hidraw1: USB HID v1.10 Joystick [Logitech Logitech Extreme 3D] on usb-0000:00:0f.1-1/input0 usb 2-2: new full speed USB device using uhci_hcd and address 2 usb 2-2: device descriptor read/64, error -71 usb 2-2: device descriptor read/64, error -71 usb 2-2: new full speed USB device using uhci_hcd and address 3 usb 2-2: device descriptor read/64, error -71 usb 2-2: device descriptor read/64, error -71 usb 2-2: new full speed USB device using uhci_hcd and address 4 usb 2-2: device not accepting address 4, error -71 usb 2-2: new full speed USB device using uhci_hcd and address 5 usb 2-2: device not accepting address 5, error -71 hub 2-0:1.0: unable to enumerate USB device on port 2 usb 2-2: new full speed USB device using uhci_hcd and address 6 usb 2-2: device descriptor read/64, error -71 usb 2-2: device descriptor read/64, error -71 usb 2-2: new full speed USB device using uhci_hcd and address 7 usb 2-2: device descriptor read/64, error -71 usb 2-2: device descriptor read/64, error -71 usb 2-2: new full speed USB device using uhci_hcd and address 8 usb 2-2: device not accepting address 8, error -71 usb 2-2: new full speed USB device using uhci_hcd and address 9 usb 2-2: device not accepting address 9, error -71 hub 2-0:1.0: unable to enumerate USB device on port 2 usb 4-1: new full speed USB device using uhci_hcd and address 3 usb 4-1: not running at top speed; connect to a high speed hub usb 4-1: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usb 4-1: USB disconnect, address 3 usb 4-2: USB disconnect, address 2 usb 4-1: new low speed USB device using uhci_hcd and address 4 usb 4-1: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input9 generic-usb 0003:046D:C00E.0005: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:11.2-1/input0 usb 4-2: new full speed USB device using uhci_hcd and address 5 usb 4-2: not running at top speed; connect to a high speed hub usb 4-2: configuration #1 chosen from 1 choice scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning scsi 3:0:0:0: Direct-Access USB 2.0 USB Flash Drive 0.00 PQ: 0 ANSI: 2 sd 3:0:0:0: [sdc] 3948544 512-byte hardware sectors: (2.02 GB/1.88 GiB) sd 3:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdc] Mode Sense: 00 00 00 00 sd 3:0:0:0: [sdc] Assuming drive cache: write through sd 3:0:0:0: [sdc] 3948544 512-byte hardware sectors: (2.02 GB/1.88 GiB) sd 3:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdc] Mode Sense: 00 00 00 00 sd 3:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 3:0:0:0: [sdc] Attached SCSI removable disk sd 3:0:0:0: Attached scsi generic sg4 type 0 usb-storage: device scan complete usb 4-2: USB disconnect, address 5 usb 1-2: new high speed USB device using ehci_hcd and address 6 usb 1-2: configuration #1 chosen from 1 choice scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 6 usb-storage: waiting for device to settle before scanning scsi 4:0:0:0: Direct-Access USB 2.0 USB Flash Drive 0.00 PQ: 0 ANSI: 2 sd 4:0:0:0: [sdc] 3948544 512-byte hardware sectors: (2.02 GB/1.88 GiB) sd 4:0:0:0: [sdc] Write Protect is off sd 4:0:0:0: [sdc] Mode Sense: 00 00 00 00 sd 4:0:0:0: [sdc] Assuming drive cache: write through sd 4:0:0:0: [sdc] 3948544 512-byte hardware sectors: (2.02 GB/1.88 GiB) sd 4:0:0:0: [sdc] Write Protect is off sd 4:0:0:0: [sdc] Mode Sense: 00 00 00 00 sd 4:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 4:0:0:0: [sdc] Attached SCSI removable disk sd 4:0:0:0: Attached scsi generic sg4 type 0 usb-storage: device scan complete usb 1-2: USB disconnect, address 6 usb 4-2: new full speed USB device using uhci_hcd and address 6 usb 4-2: not running at top speed; connect to a high speed hub usb 4-2: configuration #1 chosen from 1 choice scsi5 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 6 usb-storage: waiting for device to settle before scanning scsi 5:0:0:0: Direct-Access USB 2.0 USB Flash Drive 0.00 PQ: 0 ANSI: 2 sd 5:0:0:0: [sdc] 3948544 512-byte hardware sectors: (2.02 GB/1.88 GiB) sd 5:0:0:0: [sdc] Write Protect is off sd 5:0:0:0: [sdc] Mode Sense: 00 00 00 00 sd 5:0:0:0: [sdc] Assuming drive cache: write through sd 5:0:0:0: [sdc] 3948544 512-byte hardware sectors: (2.02 GB/1.88 GiB) sd 5:0:0:0: [sdc] Write Protect is off sd 5:0:0:0: [sdc] Mode Sense: 00 00 00 00 sd 5:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 5:0:0:0: [sdc] Attached SCSI removable disk sd 5:0:0:0: Attached scsi generic sg4 type 0 usb-storage: device scan complete usb 4-2: USB disconnect, address 6 usb 3-1: USB disconnect, address 4 usb 1-1: new high speed USB device using ehci_hcd and address 7 usb 1-1: configuration #1 chosen from 1 choice scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 7 usb-storage: waiting for device to settle before scanning scsi 6:0:0:0: Direct-Access USB 2.0 USB Flash Drive 0.00 PQ: 0 ANSI: 2 sd 6:0:0:0: [sdc] 3948544 512-byte hardware sectors: (2.02 GB/1.88 GiB) sd 6:0:0:0: [sdc] Write Protect is off sd 6:0:0:0: [sdc] Mode Sense: 00 00 00 00 sd 6:0:0:0: [sdc] Assuming drive cache: write through sd 6:0:0:0: [sdc] 3948544 512-byte hardware sectors: (2.02 GB/1.88 GiB) sd 6:0:0:0: [sdc] Write Protect is off sd 6:0:0:0: [sdc] Mode Sense: 00 00 00 00 sd 6:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 6:0:0:0: [sdc] Attached SCSI removable disk sd 6:0:0:0: Attached scsi generic sg4 type 0 usb-storage: device scan complete UDF-fs: No VRS found UDF-fs: No VRS found ISOFS: Unable to identify CD-ROM format. ISOFS: Unable to identify CD-ROM format. FAT: invalid media value (0xb9) VFS: Can't find a valid FAT filesystem on dev sdc. FAT: invalid media value (0xb9) VFS: Can't find a valid FAT filesystem on dev sdc. hfs: unable to find HFS+ superblock hfs: unable to find HFS+ superblock hfs: can't find a HFS filesystem on dev sdc. hfs: can't find a HFS filesystem on dev sdc. VFS: Can't find ext3 filesystem on dev sdc. VFS: Can't find ext3 filesystem on dev sdc. VFS: Can't find an ext2 filesystem on dev sdc. VFS: Can't find an ext2 filesystem on dev sdc. ReiserFS: sdc: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sdc ReiserFS: sdc: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sdc SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem XFS: bad magic number XFS: SB validate failed XFS: bad magic number XFS: SB validate failed JFS: nTxBlock = 8192, nTxLock = 65536 omfs: Invalid superblock (b4106a01) omfs: Invalid superblock (b4106a01) fuse init (API version 7.10) NTFS driver 2.1.29 [Flags: R/W MODULE]. NTFS-fs warning (device sdc): is_boot_sector_ntfs(): Invalid boot sector checksum. NTFS-fs error (device sdc): read_ntfs_boot_sector(): Primary boot sector is invalid. NTFS-fs error (device sdc): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. NTFS-fs error (device sdc): ntfs_fill_super(): Not an NTFS volume. NTFS-fs warning (device sdc): is_boot_sector_ntfs(): Invalid boot sector checksum. NTFS-fs error (device sdc): read_ntfs_boot_sector(): Primary boot sector is invalid. NTFS-fs error (device sdc): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. NTFS-fs error (device sdc): ntfs_fill_super(): Not an NTFS volume. UDF-fs: No VRS found UDF-fs: No VRS found ISOFS: Unable to identify CD-ROM format. ISOFS: Unable to identify CD-ROM format. FAT: invalid media value (0xb9) VFS: Can't find a valid FAT filesystem on dev sdc. FAT: invalid media value (0xb9) VFS: Can't find a valid FAT filesystem on dev sdc. hfs: unable to find HFS+ superblock hfs: unable to find HFS+ superblock hfs: can't find a HFS filesystem on dev sdc. hfs: can't find a HFS filesystem on dev sdc. VFS: Can't find ext3 filesystem on dev sdc. VFS: Can't find ext3 filesystem on dev sdc. VFS: Can't find an ext2 filesystem on dev sdc. VFS: Can't find an ext2 filesystem on dev sdc. ReiserFS: sdc: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sdc ReiserFS: sdc: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sdc XFS: bad magic number XFS: SB validate failed XFS: bad magic number XFS: SB validate failed omfs: Invalid superblock (b4106a01) omfs: Invalid superblock (b4106a01) NTFS-fs warning (device sdc): is_boot_sector_ntfs(): Invalid boot sector checksum. NTFS-fs error (device sdc): read_ntfs_boot_sector(): Primary boot sector is invalid. NTFS-fs error (device sdc): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. NTFS-fs error (device sdc): ntfs_fill_super(): Not an NTFS volume. NTFS-fs warning (device sdc): is_boot_sector_ntfs(): Invalid boot sector checksum. NTFS-fs error (device sdc): read_ntfs_boot_sector(): Primary boot sector is invalid. NTFS-fs error (device sdc): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. NTFS-fs error (device sdc): ntfs_fill_super(): Not an NTFS volume. usb 1-1: USB disconnect, address 7 agpgart-via 0000:00:00.0: AGP 2.0 bridge agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode nvidia 0000:01:00.0: putting AGP V2 device into 4x mode usb 2-1: new full speed USB device using uhci_hcd and address 10 usb 2-1: device descriptor read/64, error -71 usb 2-1: device descriptor read/64, error -71 usb 2-1: new full speed USB device using uhci_hcd and address 11 usb 2-1: device descriptor read/64, error -71 usb 2-1: device descriptor read/64, error -71 usb 2-1: new full speed USB device using uhci_hcd and address 12 usb 2-1: device not accepting address 12, error -71 usb 2-1: new full speed USB device using uhci_hcd and address 13 usb 2-1: device not accepting address 13, error -71 hub 2-0:1.0: unable to enumerate USB device on port 1 usb 2-1: new full speed USB device using uhci_hcd and address 14 usb 2-1: device descriptor read/64, error -71 usb 2-1: device descriptor read/64, error -71 usb 2-1: new full speed USB device using uhci_hcd and address 15 usb 2-1: device descriptor read/64, error -71 usb 2-1: device descriptor read/64, error -71 usb 2-1: new full speed USB device using uhci_hcd and address 16 usb 2-1: device not accepting address 16, error -71 usb 2-1: new full speed USB device using uhci_hcd and address 17 usb 2-1: device not accepting address 17, error -71 hub 2-0:1.0: unable to enumerate USB device on port 1 usb 1-1: new high speed USB device using ehci_hcd and address 9 usb 1-1: configuration #1 chosen from 1 choice scsi7 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 9 usb-storage: waiting for device to settle before scanning scsi 7:0:0:0: Direct-Access USB 2.0 USB Flash Drive 0.00 PQ: 0 ANSI: 2 sd 7:0:0:0: [sdc] 3948544 512-byte hardware sectors: (2.02 GB/1.88 GiB) sd 7:0:0:0: [sdc] Write Protect is off sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 sd 7:0:0:0: [sdc] Assuming drive cache: write through sd 7:0:0:0: [sdc] 3948544 512-byte hardware sectors: (2.02 GB/1.88 GiB) sd 7:0:0:0: [sdc] Write Protect is off sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 sd 7:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 7:0:0:0: [sdc] Attached SCSI removable disk sd 7:0:0:0: Attached scsi generic sg4 type 0 usb-storage: device scan complete UDF-fs: No VRS found UDF-fs: No VRS found ISOFS: Unable to identify CD-ROM format. ISOFS: Unable to identify CD-ROM format. FAT: invalid media value (0xb9) VFS: Can't find a valid FAT filesystem on dev sdc. FAT: invalid media value (0xb9) VFS: Can't find a valid FAT filesystem on dev sdc. hfs: unable to find HFS+ superblock hfs: unable to find HFS+ superblock hfs: can't find a HFS filesystem on dev sdc. hfs: can't find a HFS filesystem on dev sdc. VFS: Can't find ext3 filesystem on dev sdc. VFS: Can't find ext3 filesystem on dev sdc. VFS: Can't find an ext2 filesystem on dev sdc. VFS: Can't find an ext2 filesystem on dev sdc. ReiserFS: sdc: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sdc ReiserFS: sdc: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sdc XFS: bad magic number XFS: SB validate failed XFS: bad magic number XFS: SB validate failed omfs: Invalid superblock (b4106a01) omfs: Invalid superblock (b4106a01) NTFS-fs warning (device sdc): is_boot_sector_ntfs(): Invalid boot sector checksum. NTFS-fs error (device sdc): read_ntfs_boot_sector(): Primary boot sector is invalid. NTFS-fs error (device sdc): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. NTFS-fs error (device sdc): ntfs_fill_super(): Not an NTFS volume. NTFS-fs warning (device sdc): is_boot_sector_ntfs(): Invalid boot sector checksum. NTFS-fs error (device sdc): read_ntfs_boot_sector(): Primary boot sector is invalid. NTFS-fs error (device sdc): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover. NTFS-fs error (device sdc): ntfs_fill_super(): Not an NTFS volume.