[ 0.000000] Linux version 2.6.24-16-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/kubuntu-kde4.seed boot=casper initrd=/casper/initrd.gz quiet splash -- debian-installer/language=de console-setup/layoutcode=de [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007deb0000 (usable) [ 0.000000] BIOS-e820: 000000007deb0000 - 000000007decc000 (ACPI data) [ 0.000000] BIOS-e820: 000000007decc000 - 000000007df00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007df00000 - 000000007e000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 515760) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F68D0 checksum 0 [ 0.000000] ACPI: RSDP 000F68D0, 0024 (r2 LENOVO) [ 0.000000] ACPI: XSDT 7DEBB77F, 0094 (r1 LENOVO TP-7L 2170 LTP 0) [ 0.000000] ACPI: FACP 7DEBB900, 00F4 (r3 LENOVO TP-7L 2170 LNVO 1) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT 7DEBBD1D, FED1 (r1 LENOVO TP-7L 2170 MSFT 3000000) [ 0.000000] ACPI: FACS 7DEE4000, 0040 [ 0.000000] ACPI: SSDT 7DEBBAB4, 0269 (r1 LENOVO TP-7L 2170 MSFT 3000000) [ 0.000000] ACPI: ECDT 7DECBBEE, 0052 (r1 LENOVO TP-7L 2170 LNVO 1) [ 0.000000] ACPI: TCPA 7DECBC40, 0032 (r2 LENOVO TP-7L 2170 LNVO 1) [ 0.000000] ACPI: APIC 7DECBC72, 0068 (r1 LENOVO TP-7L 2170 LNVO 1) [ 0.000000] ACPI: MCFG 7DECBCDA, 003C (r1 LENOVO TP-7L 2170 LNVO 1) [ 0.000000] ACPI: HPET 7DECBD16, 0038 (r1 LENOVO TP-7L 2170 LNVO 1) [ 0.000000] ACPI: SLIC 7DECBDF0, 0176 (r1 LENOVO TP-7L 2170 LTP 0) [ 0.000000] ACPI: BOOT 7DECBF66, 0028 (r1 LENOVO TP-7L 2170 LTP 1) [ 0.000000] ACPI: ASF! 7DECBF8E, 0072 (r16 LENOVO TP-7L 2170 PTL 1) [ 0.000000] ACPI: SSDT 7DEE26D9, 025F (r1 LENOVO TP-7L 2170 INTL 20050513) [ 0.000000] ACPI: SSDT 7DEE2938, 00A6 (r1 LENOVO TP-7L 2170 INTL 20050513) [ 0.000000] ACPI: SSDT 7DEE29DE, 04F7 (r1 LENOVO TP-7L 2170 INTL 20050513) [ 0.000000] ACPI: SSDT 7DEE2ED5, 01D8 (r1 LENOVO TP-7L 2170 INTL 20050513) [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T61 [ 0.000000] ACPI: Added _OSI(Linux) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007deb0000 [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 515760) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007deb0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 157 [ 0.000000] 0: 256 -> 515760 [ 0.000000] On node 0 totalpages: 515661 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1208 pages reserved [ 0.000000] DMA zone: 2733 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6995 pages used for memmap [ 0.000000] DMA32 zone: 504669 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 507402 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/kubuntu-kde4.seed boot=casper initrd=/casper/initrd.gz quiet splash -- debian-installer/language=de console-setup/layoutcode=de [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 36.590109] Marking TSC unstable due to TSCs unsynchronized [ 36.590111] time.c: Detected 1994.909 MHz processor. [ 36.592183] Console: colour VGA+ 80x25 [ 36.592186] console [tty0] enabled [ 36.592204] Checking aperture... [ 36.592219] Calgary: detecting Calgary via BIOS EBDA area [ 36.592221] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 36.613207] Memory: 2020956k/2063040k available (2466k kernel code, 41688k reserved, 1309k data, 316k init) [ 36.613239] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 36.692035] Calibrating delay using timer specific routine.. 3993.98 BogoMIPS (lpj=7987976) [ 36.692066] Security Framework initialized [ 36.692072] SELinux: Disabled at boot. [ 36.692083] AppArmor: AppArmor initialized [ 36.692086] Failure registering capabilities with primary security module. [ 36.692283] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 36.693603] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 36.694256] Mount-cache hash table entries: 256 [ 36.694388] CPU: L1 I cache: 32K, L1 D cache: 32K [ 36.694391] CPU: L2 cache: 4096K [ 36.694393] CPU 0/0 -> Node 0 [ 36.694394] using mwait in idle threads. [ 36.694396] CPU: Physical Processor ID: 0 [ 36.694397] CPU: Processor Core ID: 0 [ 36.694403] CPU0: Thermal monitoring enabled (TM2) [ 36.694415] SMP alternatives: switching to UP code [ 36.695112] Early unpacking initramfs... done [ 37.041770] ACPI: Core revision 20070126 [ 37.041837] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 37.294256] Using local APIC timer interrupts. [ 37.344357] APIC timer calibration result 12465581 [ 37.344358] Detected 12.465 MHz APIC timer. [ 37.344433] SMP alternatives: switching to SMP code [ 37.345033] Booting processor 1/2 APIC 0x1 [ 37.355717] Initializing CPU#1 [ 37.432481] Calibrating delay using timer specific routine.. 3989.01 BogoMIPS (lpj=7978028) [ 37.432487] CPU: L1 I cache: 32K, L1 D cache: 32K [ 37.432489] CPU: L2 cache: 4096K [ 37.432491] CPU 1/1 -> Node 0 [ 37.432492] CPU: Physical Processor ID: 0 [ 37.432493] CPU: Processor Core ID: 1 [ 37.432498] CPU1: Thermal monitoring handled by SMI [ 37.432992] Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a [ 37.432856] Brought up 2 CPUs [ 37.432939] CPU0 attaching sched-domain: [ 37.432941] domain 0: span 03 [ 37.432942] groups: 01 02 [ 37.432945] domain 1: span 03 [ 37.432946] groups: 03 [ 37.432948] CPU1 attaching sched-domain: [ 37.432949] domain 0: span 03 [ 37.432950] groups: 02 01 [ 37.432952] domain 1: span 03 [ 37.432954] groups: 03 [ 37.433159] net_namespace: 120 bytes [ 37.433528] Time: 10:26:20 Date: 05/20/08 [ 37.433553] NET: Registered protocol family 16 [ 37.433722] ACPI: bus type pci registered [ 37.433791] PCI: Using configuration type 1 [ 37.435440] ACPI: EC: EC description table is found, configuring boot EC [ 37.440385] ACPI: BIOS _OSI(Linux) query honored via DMI [ 37.441102] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 37.517833] ACPI: Interpreter enabled [ 37.517835] ACPI: (supports S0 S3 S4 S5) [ 37.517849] ACPI: Using IOAPIC for interrupt routing [ 37.526734] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 [ 37.526736] ACPI: EC: driver started in poll mode [ 37.526907] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 37.528676] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 37.528682] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 37.530201] PCI: Transparent bridge - 0000:00:1e.0 [ 37.530323] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 37.530522] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 37.530648] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 37.530775] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 37.530901] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 37.531028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 37.531156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 37.531284] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 37.534825] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) [ 37.535044] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 37.535256] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 37.535467] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 37.535679] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 37.535889] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 37.536100] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 37.536312] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 37.536348] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 37.536621] ACPI: Power Resource [PUBS] (on) [ 37.536675] Linux Plug and Play Support v0.97 (c) Adam Belay [ 37.536700] pnp: PnP ACPI init [ 37.536706] ACPI: bus type pnp registered [ 37.537939] pnpacpi: exceeded the max number of mem resources: 12 [ 37.541238] pnp: PnP ACPI: found 11 devices [ 37.541240] ACPI: ACPI bus type pnp unregistered [ 37.541445] PCI: Using ACPI for IRQ routing [ 37.541447] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 37.552235] NET: Registered protocol family 8 [ 37.552237] NET: Registered protocol family 20 [ 37.552266] PCI-GART: No AMD northbridge found. [ 37.552273] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 37.552276] hpet0: 3 64-bit timers, 14318180 Hz [ 37.553310] AppArmor: AppArmor Filesystem Enabled [ 37.556202] Time: hpet clocksource has been installed. [ 37.556218] Switched to high resolution mode on CPU 0 [ 37.556914] Switched to high resolution mode on CPU 1 [ 37.564202] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 37.564204] system 00:00: iomem range 0xc0000-0xc3fff has been reserved [ 37.564206] system 00:00: iomem range 0xc4000-0xc7fff has been reserved [ 37.564208] system 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 37.564210] system 00:00: iomem range 0xcc000-0xcffff has been reserved [ 37.564213] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 37.564215] system 00:00: iomem range 0x0-0x0 could not be reserved [ 37.564217] system 00:00: iomem range 0x0-0x0 could not be reserved [ 37.564219] system 00:00: iomem range 0x0-0x0 could not be reserved [ 37.564221] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 37.564223] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 37.564225] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 37.564232] system 00:02: ioport range 0x164e-0x164f has been reserved [ 37.564234] system 00:02: ioport range 0x1000-0x107f has been reserved [ 37.564236] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 37.564238] system 00:02: ioport range 0x800-0x80f has been reserved [ 37.564240] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 37.564243] system 00:02: ioport range 0x1600-0x165f could not be reserved [ 37.564245] system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 37.564248] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 37.564250] system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved [ 37.564253] system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved [ 37.564255] system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved [ 37.564257] system 00:02: iomem range 0xfed45000-0xfed4bfff could not be reserved [ 37.564667] PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0 [ 37.564669] PCI: Bridge: 0000:00:01.0 [ 37.564671] IO window: 2000-2fff [ 37.564674] MEM window: d4000000-d6ffffff [ 37.564676] PREFETCH window: e0000000-efffffff [ 37.564679] PCI: Bridge: 0000:00:1c.0 [ 37.564684] IO window: 3000-3fff [ 37.564696] MEM window: fc000000-fdffffff [ 37.564701] PREFETCH window: f8000000-f80fffff [ 37.564711] PCI: Bridge: 0000:00:1c.1 [ 37.564716] IO window: 4000-4fff [ 37.564726] MEM window: dc100000-df2fffff [ 37.564734] PREFETCH window: dfd00000-dfdfffff [ 37.564746] PCI: Bridge: 0000:00:1c.2 [ 37.564751] IO window: 5000-5fff [ 37.564763] MEM window: d8000000-d9ffffff [ 37.564771] PREFETCH window: dfa00000-dfafffff [ 37.564783] PCI: Bridge: 0000:00:1c.3 [ 37.564788] IO window: 6000-6fff [ 37.564800] MEM window: d0000000-d1ffffff [ 37.564808] PREFETCH window: df700000-df7fffff [ 37.564818] PCI: Bridge: 0000:00:1c.4 [ 37.564823] IO window: 7000-7fff [ 37.564832] MEM window: cc000000-cdffffff [ 37.564840] PREFETCH window: df400000-df4fffff [ 37.564850] PCI: Bus 22, cardbus bridge: 0000:15:00.0 [ 37.564851] IO window: 00008000-000080ff [ 37.564858] IO window: 00008400-000084ff [ 37.564865] PREFETCH window: f4000000-f7ffffff [ 37.564872] MEM window: 80000000-83ffffff [ 37.564879] PCI: Bridge: 0000:00:1e.0 [ 37.564884] IO window: 8000-bfff [ 37.564896] MEM window: f8100000-fbffffff [ 37.564902] PREFETCH window: f4000000-f7ffffff [ 37.564921] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 37.564925] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 37.564960] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 37.564966] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 37.565010] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 37.565018] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 37.565054] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 37.565061] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 37.565097] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23 [ 37.565102] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 37.565132] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 20 [ 37.565141] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 37.565161] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) [ 37.565167] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 37.565195] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 37.565203] PCI: Setting latency timer of device 0000:15:00.0 to 64 [ 37.565214] NET: Registered protocol family 2 [ 37.600240] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 37.600875] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 37.602496] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 37.603067] TCP: Hash tables configured (established 262144 bind 65536) [ 37.603069] TCP reno registered [ 37.612296] checking if image is initramfs... it is [ 38.358913] Freeing initrd memory: 8445k freed [ 38.363338] Simple Boot Flag at 0x35 set to 0x1 [ 38.364309] audit: initializing netlink socket (disabled) [ 38.364327] audit(1211279180.460:1): initialized [ 38.366269] VFS: Disk quotas dquot_6.5.1 [ 38.366330] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 38.366439] io scheduler noop registered [ 38.366441] io scheduler anticipatory registered [ 38.366442] io scheduler deadline registered [ 38.366532] io scheduler cfq registered (default) [ 38.370425] Boot video device is 0000:01:00.0 [ 38.370577] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 38.370609] assign_interrupt_mode Found MSI capability [ 38.370635] Allocate Port Service[0000:00:01.0:pcie00] [ 38.370669] Allocate Port Service[0000:00:01.0:pcie02] [ 38.370752] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 38.370844] assign_interrupt_mode Found MSI capability [ 38.370934] Allocate Port Service[0000:00:1c.0:pcie00] [ 38.370963] Allocate Port Service[0000:00:1c.0:pcie02] [ 38.371127] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 38.371225] assign_interrupt_mode Found MSI capability [ 38.371297] Allocate Port Service[0000:00:1c.1:pcie00] [ 38.371325] Allocate Port Service[0000:00:1c.1:pcie02] [ 38.371452] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 38.371544] assign_interrupt_mode Found MSI capability [ 38.371623] Allocate Port Service[0000:00:1c.2:pcie00] [ 38.371652] Allocate Port Service[0000:00:1c.2:pcie02] [ 38.371805] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 38.371892] assign_interrupt_mode Found MSI capability [ 38.371966] Allocate Port Service[0000:00:1c.3:pcie00] [ 38.371995] Allocate Port Service[0000:00:1c.3:pcie02] [ 38.372143] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 38.372233] assign_interrupt_mode Found MSI capability [ 38.372304] Allocate Port Service[0000:00:1c.4:pcie00] [ 38.372336] Allocate Port Service[0000:00:1c.4:pcie02] [ 38.394614] Real Time Clock Driver v1.12ac [ 38.394698] hpet_resources: 0xfed00000 is busy [ 38.394739] Linux agpgart interface v0.102 [ 38.394741] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 38.395732] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 38.395789] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 38.395872] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 38.406866] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 38.406869] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 38.416924] mice: PS/2 mouse device common for all mice [ 38.416958] cpuidle: using governor ladder [ 38.416960] cpuidle: using governor menu [ 38.417072] NET: Registered protocol family 1 [ 38.417117] registered taskstats version 1 [ 38.417233] Magic number: 8:928:426 [ 38.417302] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 38.417304] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 38.417306] EDD information not available. [ 38.417312] Freeing unused kernel memory: 316k freed [ 38.422266] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 39.573593] fuse init (API version 7.9) [ 39.590212] ACPI: SSDT 7DEE1B32, 02C4 (r1 PmRef Cpu0Ist 100 INTL 20050513) [ 39.590500] ACPI: SSDT 7DEE1E7B, 085E (r1 PmRef Cpu0Cst 100 INTL 20050513) [ 39.595843] Monitor-Mwait will be used to enter C-1 state [ 39.595845] Monitor-Mwait will be used to enter C-2 state [ 39.595847] Monitor-Mwait will be used to enter C-3 state [ 39.595958] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 39.595962] ACPI: Processor [CPU0] (supports 8 throttling states) [ 39.596173] ACPI: SSDT 7DEE1A6A, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) [ 39.596440] ACPI: SSDT 7DEE1DF6, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) [ 39.600519] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 39.600523] ACPI: Processor [CPU1] (supports 8 throttling states) [ 39.602557] ACPI: Thermal Zone [THM0] (65 C) [ 39.604106] ACPI: Thermal Zone [THM1] (66 C) [ 39.841187] usbcore: registered new interface driver usbfs [ 39.841214] usbcore: registered new interface driver hub [ 39.841738] usbcore: registered new device driver usb [ 39.849808] USB Universal Host Controller Interface driver v3.0 [ 39.849859] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 39.849874] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 39.849879] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 39.850109] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 39.850151] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 39.850267] usb usb1: configuration #1 chosen from 1 choice [ 39.850286] hub 1-0:1.0: USB hub found [ 39.850290] hub 1-0:1.0: 2 ports detected [ 39.872004] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 39.872007] Copyright (c) 1999-2006 Intel Corporation. [ 39.948524] SCSI subsystem initialized [ 39.950849] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 39.950865] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 39.950871] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 39.950891] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 39.950929] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 39.951024] usb usb2: configuration #1 chosen from 1 choice [ 39.951043] hub 2-0:1.0: USB hub found [ 39.951048] hub 2-0:1.0: 2 ports detected [ 39.976723] libata version 3.00 loaded. [ 40.054812] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 40.054828] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 40.054834] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 40.054854] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 40.054896] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 [ 40.054989] usb usb3: configuration #1 chosen from 1 choice [ 40.055008] hub 3-0:1.0: USB hub found [ 40.055012] hub 3-0:1.0: 2 ports detected [ 40.158745] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 40.158757] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 40.158763] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 40.158784] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 40.158822] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 [ 40.158910] usb usb4: configuration #1 chosen from 1 choice [ 40.158926] hub 4-0:1.0: USB hub found [ 40.158930] hub 4-0:1.0: 2 ports detected [ 40.190629] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 40.262673] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 40.262685] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 40.262692] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 40.262710] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 40.262754] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 [ 40.262842] usb usb5: configuration #1 chosen from 1 choice [ 40.262858] hub 5-0:1.0: USB hub found [ 40.262862] hub 5-0:1.0: 2 ports detected [ 40.324597] usb 1-2: configuration #1 chosen from 1 choice [ 40.325987] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 40.326002] PCI: Setting latency timer of device 0000:00:19.0 to 64 [ 40.355948] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:15:58:84:97:34 [ 40.405392] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 40.405738] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 [ 40.406753] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 40.406761] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 40.406816] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 40.410746] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 40.410756] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 [ 40.428650] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 40.440762] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 40.440860] usb usb6: configuration #1 chosen from 1 choice [ 40.440880] hub 6-0:1.0: USB hub found [ 40.440884] hub 6-0:1.0: 4 ports detected [ 40.544979] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 [ 40.545829] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 40.545837] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 40.545886] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 40.549821] ehci_hcd 0000:00:1d.7: debug port 1 [ 40.549832] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 40.549844] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 [ 40.564692] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 40.564784] usb usb7: configuration #1 chosen from 1 choice [ 40.564809] hub 7-0:1.0: USB hub found [ 40.564813] hub 7-0:1.0: 6 ports detected [ 40.668709] ahci 0000:00:1f.2: version 3.0 [ 40.668750] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 [ 40.669661] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x5) don't match, using nr_ports [ 40.669664] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7 [ 40.728399] Clocksource tsc unstable (delta = -132945097 ns) [ 40.968305] usb 1-2: USB disconnect, address 2 [ 41.208115] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 41.382554] usb 1-2: configuration #1 chosen from 1 choice [ 41.627855] usb 2-1: new low speed USB device using uhci_hcd and address 3 [ 41.672048] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x7 impl SATA mode [ 41.672051] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 41.672060] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 41.672285] scsi0 : ahci [ 41.672331] scsi1 : ahci [ 41.672370] scsi2 : ahci [ 41.672417] ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 505 [ 41.672422] ata2: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226180 irq 505 [ 41.672427] ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 505 [ 41.814139] usb 2-1: configuration #1 chosen from 1 choice [ 41.825968] usbcore: registered new interface driver hiddev [ 41.838425] input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/input/input2 [ 41.860927] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:1a.1-1 [ 41.860938] usbcore: registered new interface driver usbhid [ 41.860940] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 42.147552] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 42.149106] ata1.00: ATA-7: ST910021AS, 4.06, max UDMA/100 [ 42.149109] ata1.00: 195371568 sectors, multi 16: LBA48 [ 42.150477] ata1.00: configured for UDMA/100 [ 42.459354] ata2: SATA link down (SStatus 0 SControl 0) [ 42.771174] ata3: SATA link down (SStatus 0 SControl 300) [ 42.771265] scsi 0:0:0:0: Direct-Access ATA ST910021AS 4.06 PQ: 0 ANSI: 5 [ 42.772376] ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 42.772387] PCI: Setting latency timer of device 0000:15:00.1 to 64 [ 42.825534] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8101000-f81017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 42.829815] Driver 'sd' needs updating - please use bus_type methods [ 42.832260] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 [ 42.832303] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 42.832319] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 42.834474] ata_piix 0000:00:1f.1: version 2.12 [ 42.834493] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 [ 42.834528] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 42.835199] scsi3 : ata_piix [ 42.835745] scsi4 : ata_piix [ 42.836500] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14 [ 42.836503] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15 [ 42.843159] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 42.843170] sd 0:0:0:0: [sda] Write Protect is off [ 42.843172] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 42.843187] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.843228] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) [ 42.843236] sd 0:0:0:0: [sda] Write Protect is off [ 42.843238] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 42.843252] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 42.843254] sda: sda1 sda2 < sda5 sda6 > [ 43.132383] sd 0:0:0:0: [sda] Attached SCSI disk [ 43.136178] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 43.155354] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-U10N, 1.05, max UDMA/33 [ 43.327151] ata4.00: configured for UDMA/33 [ 43.327219] ata5: port disabled. ignoring. [ 43.330339] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U10N 1.05 PQ: 0 ANSI: 5 [ 43.330398] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 43.335833] Driver 'sr' needs updating - please use bus_type methods [ 43.338857] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 43.338859] Uniform CD-ROM driver Revision: 3.20 [ 43.338894] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 43.969849] kjournald starting. Commit interval 5 seconds [ 43.969857] EXT3-fs: mounted filesystem with journal data mode. [ 44.098429] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00016c200015fc47] [ 45.218767] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 45.249476] ISO 9660 Extensions: RRIP_1991A [ 45.580566] Registering unionfs 1.4 [ 45.580568] unionfs: debugging is not enabled [ 45.587148] loop: module loaded [ 45.886017] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 95.558469] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 96.031347] iTCO_vendor_support: vendor-support=0 [ 96.437779] Non-volatile memory driver v1.2 [ 96.710549] ACPI: WMI-Acer: Mapper loaded [ 96.878938] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 96.992513] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 96.995098] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 96.995180] iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060) [ 96.995221] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 96.998593] ACPI: AC Adapter [AC] (on-line) [ 97.278531] thinkpad_acpi: ThinkPad ACPI Extras v0.17 [ 97.278534] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 97.278536] thinkpad_acpi: ThinkPad BIOS 7LETB7WW (2.17 ), EC 7KHT24WW-1.08 [ 97.278537] thinkpad_acpi: Lenovo ThinkPad T61 [ 97.279352] thinkpad_acpi: radio switch found; radios are enabled [ 97.281678] input: Power Button (FF) as /devices/virtual/input/input4 [ 97.324283] ACPI: Power Button (FF) [PWRF] [ 97.324350] input: Lid Switch as /devices/virtual/input/input5 [ 97.344542] ACPI: Lid Switch [LID] [ 97.344586] input: Sleep Button (CM) as /devices/virtual/input/input6 [ 97.392216] ACPI: Sleep Button (CM) [SLPB] [ 97.394692] thinkpad_acpi: standard ACPI backlight interface available, not loading native one... [ 97.394951] input: ThinkPad Extra Buttons as /devices/virtual/input/input7 [ 97.689865] ACPI: Battery Slot [BAT0] (battery present) [ 97.692882] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 97.741225] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 97.743064] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input9 [ 97.793067] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 98.105606] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6] [ 98.140975] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.0 [ 98.140978] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 98.232683] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16 [ 98.232689] Socket status: 30000006 [ 98.232692] pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff [ 98.232694] pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff [ 98.232696] pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff [ 98.232996] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 98.233034] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 98.234027] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 98.521843] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 [ 98.521848] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 98.569630] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10 [ 98.625286] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels [ 98.625605] wmaster0: Selected rate control algorithm 'iwl-4965-rs' [ 98.705659] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 [ 98.705666] hda_intel: probe_mask set to 0x1 for device 17aa:20ac [ 98.706711] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 101.101113] device-mapper: uevent: version 1.0.3 [ 101.101138] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 102.531595] ip_tables: (C) 2000-2006 Netfilter Core Team [ 103.852227] ACPI: ACPI Dock Station Driver [ 103.854085] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay [ 103.854091] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler [ 103.854110] ACPI: Error installing bay notify handler [ 103.854113] ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added [ 104.278021] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 104.531834] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11 [ 108.293909] lp: driver loaded but no devices found [ 108.420996] ppdev: user-space parallel port driver [ 111.744466] input: /usr/sbin/thinkpad-keys as /devices/virtual/input/input12 [ 115.647516] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX [ 115.647527] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO [ 115.801083] Bluetooth: Core ver 2.11 [ 115.801510] NET: Registered protocol family 31 [ 115.801514] Bluetooth: HCI device and connection manager initialized [ 115.801522] Bluetooth: HCI socket layer initialized [ 116.090526] Bluetooth: L2CAP ver 2.9 [ 116.090535] Bluetooth: L2CAP socket layer initialized [ 116.134768] Bluetooth: RFCOMM socket layer initialized [ 116.135491] Bluetooth: RFCOMM TTY layer initialized [ 116.135497] Bluetooth: RFCOMM ver 1.8 [ 117.551018] NET: Registered protocol family 17 [ 123.220653] NET: Registered protocol family 10 [ 123.220851] lo: Disabled Privacy Extensions [ 123.221772] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 131.179593] eth0: no IPv6 routers present [ 274.470975] wlan0: Initial auth_alg=0 [ 274.470986] wlan0: authenticate with AP 00:19:56:ac:a9:21 [ 274.472833] wlan0: Initial auth_alg=0 [ 274.472840] wlan0: authenticate with AP 00:19:56:ac:a9:21 [ 274.472857] wlan0: RX authentication from 00:19:56:ac:a9:21 (alg=0 transaction=2 status=0) [ 274.472862] wlan0: authenticated [ 274.472866] wlan0: associate with AP 00:19:56:ac:a9:21 [ 274.474550] wlan0: authentication frame received from 00:19:56:ac:a9:21, but not in authenticate state - ignored [ 274.476886] wlan0: RX AssocResp from 00:19:56:ac:a9:21 (capab=0x421 status=0 aid=33) [ 274.476893] wlan0: associated [ 274.476900] wlan0: CTS protection enabled (BSSID=00:19:56:ac:a9:21) [ 274.477018] wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0 [ 274.477024] wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 [ 274.477030] wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 [ 274.477036] wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 [ 274.483457] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 275.610654] wlan0: no IPv6 routers present