Linux version 2.6.32-ARCH (tobias@T-POWA-LX) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Tue Feb 9 15:12:10 CET 2010 Command line: root=/dev/disk/by-uuid/89e492fa-6123-4226-9c4b-e878c19cb9e7 ro acpi=on KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe5a800 (usable) BIOS-e820: 000000007fe5a800 - 0000000080000000 (reserved) BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) Malformed early option 'acpi' DMI 2.4 present. last_pfn = 0x7fe5a max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07FF00000 mask FFFF00000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000001000 (usable) modified: 0000000000001000 - 0000000000006000 (reserved) modified: 0000000000006000 - 000000000009f000 (usable) modified: 000000000009f000 - 00000000000a0000 (reserved) modified: 0000000000100000 - 000000007fe5a800 (usable) modified: 000000007fe5a800 - 0000000080000000 (reserved) modified: 00000000f8000000 - 00000000fc000000 (reserved) modified: 00000000fec00000 - 00000000fec10000 (reserved) modified: 00000000fed18000 - 00000000fed1c000 (reserved) modified: 00000000fed20000 - 00000000fed90000 (reserved) modified: 00000000feda0000 - 00000000feda6000 (reserved) modified: 00000000fee00000 - 00000000fee10000 (reserved) modified: 00000000ffe00000 - 0000000100000000 (reserved) initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000007fe5a000 0000000000 - 007fe00000 page 2M 007fe00000 - 007fe5a000 page 4k kernel direct mapping tables up to 7fe5a000 @ 8000-c000 RAMDISK: 37d8d000 - 37fefda2 ACPI: RSDP 00000000000fbb10 00024 (v02 DELL ) ACPI: XSDT 000000007fe5d200 00064 (v01 DELL M08 27DA0104 ASL 00000061) ACPI: FACP 000000007fe5d09c 000F4 (v04 DELL M08 27DA0104 ASL 00000061) ACPI: DSDT 000000007fe5d800 06114 (v02 INT430 SYSFexxx 00001001 INTL 20050624) ACPI: FACS 000000007fe6c000 00040 ACPI: HPET 000000007fe5d300 00038 (v01 DELL M08 00000001 ASL 00000061) ACPI: APIC 000000007fe5d400 00068 (v01 DELL M08 27DA0104 ASL 00000047) ACPI: ASF! 000000007fe5d000 0007E (v32 DELL M08 27DA0104 ASL 00000061) ACPI: MCFG 000000007fe5d3c0 0003E (v16 DELL M08 27DA0104 ASL 00000061) ACPI: TCPA 000000007fe5d700 00032 (v01 00000000 ASL 00000000) ACPI: SLIC 000000007fe5d49c 00176 (v01 DELL M08 27DA0104 ASL 00000061) ACPI: SSDT 000000007fe5b9c0 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 007fe5a000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 000169c898] TEXT DATA BSS ==> [0001000000 - 000169c898] #3 [0037d8d000 - 0037fefda2] RAMDISK ==> [0037d8d000 - 0037fefda2] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #5 [000169d000 - 000169d1ec] BRK ==> [000169d000 - 000169d1ec] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x00000001 0: 0x00000006 -> 0x0000009f 0: 0x00000100 -> 0x0007fe5a On node 0 totalpages: 523764 DMA zone: 56 pages used for memmap DMA zone: 102 pages reserved DMA zone: 3836 pages, LIFO batch:0 DMA32 zone: 7107 pages used for memmap DMA32 zone: 512663 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000001000 - 0000000000006000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:78000000) Booting paravirtualized kernel on bare hardware NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88984 r8192 d21608 u1048576 pcpu-alloc: s88984 r8192 d21608 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 516499 Kernel command line: root=/dev/disk/by-uuid/89e492fa-6123-4226-9c4b-e878c19cb9e7 ro acpi=on PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2052924k/2095464k available (3315k kernel code, 408k absent, 41492k reserved, 1750k data, 472k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:768 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 2194.062 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.96 BogoMIPS (lpj=7313540) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Events: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (8779.51 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 PCI: MCFG area at f8000000 reserved in E820 PCI: Using MMCONFIG at f8000000 - fbffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 000000007fe6c080 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: ACPI Dock Station Driver: 3 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f] pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6ffc000-0xf6ffffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f] pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf] pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7] pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb] pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7] pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb] pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf6ffb800-0xf6ffbfff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0xf6ffb700-0xf6ffb7ff] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df] pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf2000000-0xf3ffffff] pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:00:01.0: bridge io port: [0xe000-0xefff] pci 0000:00:01.0: bridge 32bit mmio: [0xf2000000-0xf6efffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] pci 0000:0c:00.0: reg 10 32bit mmio: [0xf1fff000-0xf1ffffff] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold pci 0000:0c:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0xf1f00000-0xf1ffffff] pci 0000:09:00.0: reg 10 64bit mmio: [0xf1ef0000-0xf1efffff] pci 0000:09:00.0: PME# supported from D3hot D3cold pci 0000:09:00.0: PME# disabled pci 0000:00:1c.5: bridge 32bit mmio: [0xf1e00000-0xf1efffff] pci 0000:00:1e.0: transparent bridge pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7 ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7) ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0a: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling pnp 00:0a: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling pnp 00:0b: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling pnp 00:0b: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling pnp 00:0b: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling pnp 00:0b: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:05: ioport range 0xc80-0xcaf has been reserved system 00:05: ioport range 0xcc0-0xcff could not be reserved system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved system 00:09: ioport range 0xcb0-0xcbb has been reserved system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved system 00:0a: ioport range 0x900-0x97f has been reserved system 00:0a: ioport range 0x4d0-0x4d1 has been reserved system 00:0b: ioport range 0xf400-0xf4fe has been reserved system 00:0b: ioport range 0x1080-0x10bf has been reserved system 00:0b: ioport range 0x10c0-0x10df has been reserved system 00:0b: ioport range 0x809-0x809 has been reserved system 00:0c: iomem range 0x0-0x9efff could not be reserved system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved system 00:0c: iomem range 0xc0000-0xcffff has been reserved system 00:0c: iomem range 0xe0000-0xfffff has been reserved system 00:0c: iomem range 0x100000-0x7fe5a7ff could not be reserved system 00:0c: iomem range 0x7fe5a800-0x7fefffff has been reserved system 00:0c: iomem range 0x7ff00000-0x7fffffff has been reserved system 00:0c: iomem range 0x7ff00000-0x806fffff could not be reserved system 00:0c: iomem range 0xffe00000-0xffffffff has been reserved system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved system 00:0c: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xe000-0xefff pci 0000:00:01.0: MEM window: 0xf2000000-0xf6efffff pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c pci 0000:00:1c.1: IO window: 0x3000-0x3fff pci 0000:00:1c.1: MEM window: 0xf1f00000-0xf1ffffff pci 0000:00:1c.1: PREFETCH window: 0x00000080400000-0x000000805fffff pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09 pci 0000:00:1c.5: IO window: 0x4000-0x4fff pci 0000:00:1c.5: MEM window: 0xf1e00000-0xf1efffff pci 0000:00:1c.5: PREFETCH window: 0x00000080600000-0x000000807fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] pci_bus 0000:01: resource 1 mem: [0xf2000000-0xf6efffff] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff] pci_bus 0000:0b: resource 1 mem: [0x80000000-0x801fffff] pci_bus 0000:0b: resource 2 pref mem [0x80200000-0x803fffff] pci_bus 0000:0c: resource 0 io: [0x3000-0x3fff] pci_bus 0000:0c: resource 1 mem: [0xf1f00000-0xf1ffffff] pci_bus 0000:0c: resource 2 pref mem [0x80400000-0x805fffff] pci_bus 0000:09: resource 0 io: [0x4000-0x4fff] pci_bus 0000:09: resource 1 mem: [0xf1e00000-0xf1efffff] pci_bus 0000:09: resource 2 pref mem [0x80600000-0x807fffff] pci_bus 0000:03: resource 3 io: [0x00-0xffff] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device Unpacking initramfs... Freeing initrd memory: 2443k freed Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1267132033.453:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 4015 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: irq 24 for MSI/MSI-X pcieport 0000:00:01.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X pcieport 0000:00:1c.5: setting latency timer to 64 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 472k freed input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 libata: Unknown symbol scsi_device_get libata: Unknown symbol scsi_remove_host libata: Unknown symbol scsi_schedule_eh libata: Unknown symbol sdev_evt_send_simple libata: Unknown symbol scsi_device_set_state libata: Unknown symbol scsi_eh_finish_cmd libata: Unknown symbol scsi_device_put libata: Unknown symbol scsi_eh_flush_done_q libata: Unknown symbol scsi_host_put libata: Unknown symbol scsi_rescan_device libata: Unknown symbol scsi_print_command libata: Unknown symbol scsi_adjust_queue_depth libata: Unknown symbol scsi_execute libata: Unknown symbol scsi_build_sense_buffer libata: Unknown symbol scsi_remove_device libata: Unknown symbol scsi_add_host_with_dma libata: Unknown symbol scsi_normalize_sense libata: Unknown symbol scsi_host_alloc libata: Unknown symbol __scsi_add_device SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ahci 0000:00:1f.2: irq 28 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffb900 irq 28 ata2: DUMMY ata3: SATA max UDMA/133 abar m2048@0xf6ffb800 port 0xf6ffba00 irq 28 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata1.00: ATA-8: FUJITSU MHY2120BH, 0085000B, max UDMA/100 ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHY2120B 0085 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sd 0:0:0:0: [sda] Attached SCSI disk device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs udev: starting version 151 fuse init (API version 7.13) ACPI: SSDT 000000007fe5c4f6 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT 000000007fe5be8c 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state sd 0:0:0:0: Attached scsi generic sg0 type 0 Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle processor LNXCPU:00: registered as cooling_device0 ACPI: SSDT 000000007fe5c77c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) ACPI: SSDT 000000007fe5c471 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM] (56 C) Switching to clocksource hpet processor LNXCPU:01: registered as cooling_device1 ACPI: WMI: Mapper loaded Uniform Multi-Platform E-IDE driver usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 ACPI: Power Button [PBTN] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4 ACPI: Sleep Button [SBTN] ACPI: AC Adapter [AC] (on-line) ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x02) PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 piix 0000:00:1f.1: IDE port disabled piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x6fa0-0x6fa7 Probing IDE interface ide0... tg3.c:v3.102 (September 1, 2009) tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 tg3 0000:09:00.0: setting latency timer to 64 eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:1c:23:3b:3a:e7 eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1]) eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) mac80211: Unknown symbol cfg80211_send_assoc_timeout mac80211: Unknown symbol cfg80211_scan_done mac80211: Unknown symbol cfg80211_send_auth_timeout mac80211: Unknown symbol cfg80211_send_deauth mac80211: Unknown symbol cfg80211_classify8021d mac80211: Unknown symbol wiphy_register mac80211: Unknown symbol wiphy_new mac80211: Unknown symbol cfg80211_put_bss mac80211: Unknown symbol ieee80211_bss_get_ie mac80211: Unknown symbol cfg80211_ibss_joined mac80211: Unknown symbol cfg80211_michael_mic_failure mac80211: Unknown symbol cfg80211_send_rx_auth mac80211: Unknown symbol wiphy_unregister mac80211: Unknown symbol cfg80211_send_disassoc mac80211: Unknown symbol ieee80211_radiotap_iterator_init mac80211: Unknown symbol cfg80211_get_bss mac80211: Unknown symbol __ieee80211_get_channel mac80211: Unknown symbol rfc1042_header mac80211: Unknown symbol ieee80211_data_to_8023 mac80211: Unknown symbol cfg80211_send_rx_assoc mac80211: Unknown symbol ieee80211_radiotap_iterator_next mac80211: Unknown symbol ieee80211_channel_to_frequency mac80211: Unknown symbol ieee80211_hdrlen mac80211: Unknown symbol cfg80211_inform_bss_frame mac80211: Unknown symbol ieee80211_frequency_to_channel mac80211: Unknown symbol bridge_tunnel_header mac80211: Unknown symbol cfg80211_unlink_bss mac80211: Unknown symbol wiphy_free input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input5 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 nvidia: module license 'NVIDIA' taints kernel. Disabling lock debugging due to kernel taint input: DualPoint Stick as /devices/platform/i8042/serio1/input/input6 input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input7 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:1b.0: setting latency timer to 64 nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:01:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.53 Wed Dec 9 15:29:46 PST 2009 usb 3-2: new full speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice usb 7-1: new full speed USB device using uhci_hcd and address 2 usb 7-1: configuration #1 chosen from 1 choice hub 7-1:1.0: USB hub found hub 7-1:1.0: 4 ports detected usb 7-1.2: new full speed USB device using uhci_hcd and address 3 Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 usb 7-1.2: configuration #1 chosen from 1 choice EXT3 FS on sda5, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with writeback data mode. Adding 2490032k swap on /dev/sda7. Priority:-1 extents:1 across:2490032k tg3 0000:09:00.0: irq 29 for MSI/MSI-X tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. hald-probe-inpu[4012]: segfault at 2 ip 00007fdef67a9559 sp 00007ffff4bd84b0 error 4 in libc-2.11.1.so[7fdef6733000+14d000]