This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.7.3.902 (1.7.4 RC 2) Release Date: 2009-12-26 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.32-ARCH i686 Current Operating System: Linux DALAVERA 2.6.32-ARCH #1 SMP PREEMPT Thu Jan 7 22:19:56 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/sda4 i915.modeset=0 Build Date: 26 December 2009 11:37:45AM Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 16 07:24:51 2010 (II) Loader magic: 0x81e4c60 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (--) using VT number 7 (--) PCI:*(0:0:2:0) 8086:2e32:1849:2e32 Intel Corporation 4 Series Chipset Integrated Graphics Controller rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8 (--) PCI: (0:0:2:1) 8086:2e33:1849:2e32 Intel Corporation 4 Series Chipset Integrated Graphics Controller rev 3, Mem @ 0xfea00000/1048576 (==) Using default built-in configuration (30 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default intel Device 0" Driver "intel" EndSection Section "Screen" Identifier "Builtin Default intel Screen 0" Device "Builtin Default intel Device 0" EndSection Section "Device" Identifier "Builtin Default vesa Device 0" Driver "vesa" EndSection Section "Screen" Identifier "Builtin Default vesa Screen 0" Device "Builtin Default vesa Device 0" EndSection Section "Device" Identifier "Builtin Default fbdev Device 0" Driver "fbdev" EndSection Section "Screen" Identifier "Builtin Default fbdev Screen 0" Device "Builtin Default fbdev Device 0" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default intel Screen 0" Screen "Builtin Default vesa Screen 0" Screen "Builtin Default fbdev Screen 0" EndSection (==) --- End of built-in configuration --- (==) ServerLayout "Builtin Default Layout" (**) |-->Screen "Builtin Default intel Screen 0" (0) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default intel Device 0" (==) No monitor specified for screen "Builtin Default intel Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default vesa Screen 0" (1) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default vesa Device 0" (==) No monitor specified for screen "Builtin Default vesa Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default fbdev Screen 0" (2) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default fbdev Device 0" (==) No monitor specified for screen "Builtin Default fbdev Screen 0". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (==) FontPath set to: /usr/share/fonts/misc, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/TTF, /usr/share/fonts/Type1 (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AutoAddDevices. (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.7.1, module version = 2.9.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "vesa" (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.7.0.901, module version = 2.2.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "fbdev" (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.7.0.901, module version = 0.4.1 ABI class: X.Org Video Driver, version 6.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale (II) VESA: driver for VESA chipsets: vesa (II) FBDEV: driver for framebuffer: fbdev (II) Primary Device is: PCI 00@00:02:0 (WW) Falling back to old probe method for vesa (WW) Falling back to old probe method for fbdev (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 0.0.2 ABI class: X.Org Video Driver, version 6.0 (EE) open /dev/fb0: No such file or directory (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 0.1.0 ABI class: X.Org Video Driver, version 6.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: drmOpenMinor returns 8 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (EE) intel(0): [drm] Failed to detect GEM. Kernel 2.6.28 required. (EE) intel(0): Failed to become DRM master. (II) intel(0): Creating default Display subsection in Screen section "Builtin Default intel Screen 0" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) G41 (--) intel(0): Chipset: "G41" (--) intel(0): Linear framebuffer at 0xD0000000 (--) intel(0): IO registers at addr 0xFE400000 size 4194304 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (II) intel(0): No SDVO device is found in VBT (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA has no monitor section xf86TokenToOptinfo: table is NULL (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): No SDVO device found on SDVOB (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed. (II) intel(0): Output HDMI-1 has no monitor section (II) intel(0): I2C bus "HDMIDDC_B" initialized. (II) intel(0): HDMI output 1 detected xf86TokenToOptinfo: table is NULL (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E. (II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "PHL", prod id 2118 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): EDID vendor "PHL", prod id 2118 (II) intel(0): I2C device "HDMIDDC_B:ddc2" registered at address 0xA0. (II) intel(0): EDID vendor "SNY", prod id 2049 (II) intel(0): Output VGA connected (II) intel(0): Output HDMI-1 connected (II) intel(0): Using fuzzy aspect match for initial modes (II) intel(0): Output VGA using initial mode 1024x768 (II) intel(0): Output HDMI-1 using initial mode 1024x768 (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 262140 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (**) intel(0): Display dimensions: (340, 270) mm (**) intel(0): DPI set to (76, 72) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.3.902, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x10000120 to 0x30000120 (WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x10000b00 to 0x30000b00 (II) UnloadModule: "vesa" (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so (II) UnloadModule: "fbdev" (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so (II) UnloadModule: "fbdevhw" (II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so (==) Depth 24 pixmap format is 32 bpp (II) intel(0): Kernel reported 740608 total, 1 used (II) intel(0): I830CheckAvailableMemory: 2962428 kB available (WW) intel(0): DRI2: failed to open drm device (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (EE) intel(0): Failed to initialize kernel memory manager (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (WW) intel(0): drmSetMaster failed: Bad file descriptor (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB) (II) intel(0): 0x0002a000-0x00829fff: fake bufmgr (8192 kB) (II) intel(0): 0x0082a000-0x00b29fff: front buffer (3072 kB) X tiled (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (WW) intel(0): ESR is 0x00000010, page table error (WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE (WW) intel(0): Existing errors found in hardware state. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): Output HDMI-1 is connected to pipe B (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (==) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): direct rendering: Failed (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Screen 0 is not DRI2 capable (II) AIGLX: Screen 0 is not DRI capable (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) intel(0): Setting screen physical size to 270 x 203 (II) config/hal: Adding input device Macintosh mouse button emulation (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.7.3, module version = 2.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event0" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found relative axes (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1 (**) Macintosh mouse button emulation: (accel) acceleration profile 0 (II) Macintosh mouse button emulation: initialized for relative axes. (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device UVC Camera (046d:09a4) (**) UVC Camera (046d:09a4): always reports core events (**) UVC Camera (046d:09a4): Device: "/dev/input/event6" (II) UVC Camera (046d:09a4): Found keys (II) UVC Camera (046d:09a4): Configuring as keyboard (II) XINPUT: Adding extended input device "UVC Camera (046d:09a4)" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device USB Optical Mouse (**) USB Optical Mouse: always reports core events (**) USB Optical Mouse: Device: "/dev/input/event5" (II) USB Optical Mouse: Found 9 mouse buttons (II) USB Optical Mouse: Found scroll wheel(s) (II) USB Optical Mouse: Found relative axes (II) USB Optical Mouse: Found x and y relative axes (II) USB Optical Mouse: Configuring as mouse (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5 (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE) (**) USB Optical Mouse: (accel) keeping acceleration scheme 1 (**) USB Optical Mouse: (accel) acceleration profile 0 (II) USB Optical Mouse: initialized for relative axes. (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event2" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event3" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E. (II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "PHL", prod id 2118 (II) intel(0): EDID vendor "SNY", prod id 2049 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz) (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 -hsync -vsync (45.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): EDID vendor "SNY", prod id 2049 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E. (II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "PHL", prod id 2118 (II) intel(0): EDID vendor "SNY", prod id 2049 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz) (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 -hsync -vsync (45.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): EDID vendor "SNY", prod id 2049 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E. (II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "PHL", prod id 2118 (II) intel(0): EDID vendor "SNY", prod id 2049 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz) (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 -hsync -vsync (45.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): EDID vendor "SNY", prod id 2049 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E. (II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "PHL", prod id 2118 (II) intel(0): EDID vendor "SNY", prod id 2049 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz) (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 -hsync -vsync (45.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): EDID vendor "SNY", prod id 2049 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E. (II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "PHL", prod id 2118 (II) intel(0): EDID vendor "SNY", prod id 2049 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz) (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 -hsync -vsync (45.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): EDID vendor "SNY", prod id 2049 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E. (II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID vendor "PHL", prod id 2118 (II) intel(0): EDID vendor "SNY", prod id 2049 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz) (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 -hsync -vsync (45.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): EDID vendor "SNY", prod id 2049 (II) intel(0): Allocate new frame buffer 1280x1024 stride 1280 (II) intel(0): New front buffer at 0xb2a000