Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Wed Sep 9 14:16:44 CEST 2009 Command line: root=/dev/disk/by-uuid/c63f0032-2413-4d11-871b-4166e7f30e60 ro KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007c9a1740 (usable) BIOS-e820: 000000007c9a1740 - 000000007c9a37a0 (ACPI NVS) BIOS-e820: 000000007c9a37a0 - 000000007f000000 (reserved) BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved) BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved) DMI 2.5 present. last_pfn = 0x7c9a1 max_arch_pfn = 0x100000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-E3FFF write-protect E4000-EFFFF write-back F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07CA00000 mask FFFE00000 uncachable 2 base 07CC00000 mask FFFC00000 uncachable 3 base 07D000000 mask FFF000000 uncachable 4 base 07E000000 mask FFE000000 uncachable 5 disabled 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000001000 (usable) modified: 0000000000001000 - 0000000000006000 (reserved) modified: 0000000000006000 - 000000000009f800 (usable) modified: 000000000009f800 - 00000000000a0000 (reserved) modified: 00000000000e8000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000007c9a1740 (usable) modified: 000000007c9a1740 - 000000007c9a37a0 (ACPI NVS) modified: 000000007c9a37a0 - 000000007f000000 (reserved) modified: 00000000f4000000 - 00000000f8000000 (reserved) modified: 00000000fec00000 - 00000000fed40000 (reserved) modified: 00000000fed45000 - 0000000100000000 (reserved) init_memory_mapping: 0000000000000000-000000007c9a1000 0000000000 - 007c800000 page 2M 007c800000 - 007c9a1000 page 4k kernel direct mapping tables up to 7c9a1000 @ 8000-c000 RAMDISK: 37f37000 - 37fefee8 ACPI: RSDP 00000000000e5810 00014 (v00 COMPAQ) ACPI: RSDT 000000007c9c5840 00040 (v01 HPQOEM SLIC-BPC 20090305 00000000) ACPI: FACP 000000007c9c58e8 00074 (v01 COMPAQ EAGLLAKE 00000001 00000000) ACPI Warning (tbfadt-0562): Optional field Pm2ControlBlock has zero address or length: 0000000000000050/0 [20090320] ACPI Warning (tbfadt-0612): Invalid length for Pm2ControlBlock: 0, using default 8 [20090320] ACPI: DSDT 000000007c9c5e27 0A253 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E) ACPI: FACS 000000007c9c5800 00040 ACPI: APIC 000000007c9c595c 00084 (v01 COMPAQ EAGLLAKE 00000001 00000000) ACPI: ASF! 000000007c9c59e0 00063 (v32 COMPAQ EAGLLAKE 00000001 00000000) ACPI: MCFG 000000007c9c5a43 0003C (v01 COMPAQ EAGLLAKE 00000001 00000000) ACPI: TCPA 000000007c9c5a7f 00032 (v01 COMPAQ EAGLLAKE 00000001 00000000) ACPI: HPET 000000007c9c5c27 00038 (v01 COMPAQ EAGLLAKE 00000001 00000000) ACPI: DMAR 000000007c9c5c5f 001C8 (v01 COMPAQ EAGLLAKE 00000001 00000000) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 007c9a1000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 000082d310] TEXT DATA BSS ==> [0000200000 - 000082d310] #3 [0037f37000 - 0037fefee8] RAMDISK ==> [0037f37000 - 0037fefee8] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [000082e000 - 000082e148] BRK ==> [000082e000 - 000082e148] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] found SMP MP-table at [ffff8800000f9bf0] f9bf0 [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x00000001 0: 0x00000006 -> 0x0000009f 0: 0x00000100 -> 0x0007c9a1 On node 0 totalpages: 510267 DMA zone: 56 pages used for memmap DMA zone: 1682 pages reserved DMA zone: 2256 pages, LIFO batch:0 DMA32 zone: 6922 pages used for memmap DMA32 zone: 499351 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0xf808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000001000 - 0000000000006000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 7f000000:75000000) NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 25 pages at ffff880001010000, static data 72352 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 501607 Kernel command line: root=/dev/disk/by-uuid/c63f0032-2413-4d11-871b-4166e7f30e60 ro Initializing CPU#0 xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 NR_IRQS:768 PID hash table entries: 4096 (order: 12, 32768 bytes) Fast TSC calibration using PIT Detected 2493.529 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2001032k/2041476k available (3409k kernel code, 408k absent, 39368k reserved, 1239k data, 464k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered HPET: 8 timers in total, 4 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4989.85 BogoMIPS (lpj=8311763) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20090320 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 0a Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4989.28 BogoMIPS (lpj=8312449) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (9978.13 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 1888 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63 PCI: MCFG area at f4000000 reserved in E820 PCI: Using MMCONFIG at f4000000 - f7ffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI Error (dsfield-0140): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88007c4150e0), AE_ALREADY_EXISTS ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error ACPI Warning (nspredef-0331): \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 [20090320] ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xf0000000-0xf03fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff] pci 0000:00:02.0: reg 20 io port: [0x1230-0x1237] pci 0000:00:02.1: reg 10 64bit mmio: [0xf0400000-0xf04fffff] pci 0000:00:03.0: reg 10 64bit mmio: [0xf0527100-0xf052710f] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: reg 10 io port: [0x1238-0x123f] pci 0000:00:03.2: reg 14 io port: [0x1260-0x1263] pci 0000:00:03.2: reg 18 io port: [0x1240-0x1247] pci 0000:00:03.2: reg 1c io port: [0x1264-0x1267] pci 0000:00:03.2: reg 20 io port: [0x1220-0x122f] pci 0000:00:03.3: reg 10 io port: [0x1248-0x124f] pci 0000:00:03.3: reg 14 32bit mmio: [0xf0524000-0xf0524fff] pci 0000:00:19.0: reg 10 32bit mmio: [0xf0500000-0xf051ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xf0525000-0xf0525fff] pci 0000:00:19.0: reg 18 io port: [0x1100-0x111f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x1120-0x113f] pci 0000:00:1a.1: reg 20 io port: [0x1140-0x115f] pci 0000:00:1a.2: reg 20 io port: [0x1160-0x117f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf0526800-0xf0526bff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0520000-0xf0523fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1180-0x119f] pci 0000:00:1d.1: reg 20 io port: [0x11a0-0x11bf] pci 0000:00:1d.2: reg 20 io port: [0x11c0-0x11df] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0526c00-0xf0526fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0x1250-0x1257] pci 0000:00:1f.2: reg 14 io port: [0x1268-0x126b] pci 0000:00:1f.2: reg 18 io port: [0x1258-0x125f] pci 0000:00:1f.2: reg 1c io port: [0x126c-0x126f] pci 0000:00:1f.2: reg 20 io port: [0x11e0-0x11ff] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0526000-0xf05267ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1e.0: transparent bridge pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI Error (dsfield-0140): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88007c4150e0), AE_ALREADY_EXISTS ACPI Warning (nspredef-0331): \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 [20090320] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet: hpet2 irq 24 for MSI hpet: hpet3 irq 25 for MSI Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered system 00:0d: ioport range 0x4d0-0x4d1 has been reserved system 00:0e: ioport range 0x400-0x41f has been reserved system 00:0e: ioport range 0x420-0x43f has been reserved system 00:0e: ioport range 0x440-0x45f has been reserved system 00:0e: ioport range 0x460-0x47f has been reserved system 00:0e: ioport range 0x800-0x87f has been reserved system 00:0e: ioport range 0x880-0x8ff has been reserved system 00:0e: ioport range 0xf800-0xf81f has been reserved system 00:0e: ioport range 0xf820-0xf83f has been reserved system 00:0e: ioport range 0xf840-0xf85f has been reserved system 00:0e: ioport range 0xf860-0xf87f has been reserved system 00:0e: ioport range 0xfa00-0xfa3f has been reserved system 00:0e: ioport range 0xfc00-0xfc7f has been reserved system 00:0e: ioport range 0xfc80-0xfcff has been reserved system 00:0e: ioport range 0xfe00-0xfe7f has been reserved system 00:0e: ioport range 0xfe80-0xfeff has been reserved system 00:0f: iomem range 0x0-0x9ffff could not be reserved system 00:0f: iomem range 0x100000-0x7effffff could not be reserved system 00:0f: iomem range 0xe4000-0xfffff could not be reserved system 00:0f: iomem range 0xfec01000-0xfecfffff has been reserved system 00:0f: iomem range 0xfed00400-0xfed3ffff has been reserved system 00:0f: iomem range 0xfed45000-0xffffffff has been reserved system 00:0f: iomem range 0xf4000000-0xf7ffffff has been reserved system 00:0f: iomem range 0xce400-0xe3fff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:20 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:30 pci 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: disabled pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:07: resource 3 io: [0x00-0xffff] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 739k freed Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1254436160.056:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 3911 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: irq 28 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.4: irq 29 for MSI/MSI-X pcieport-driver 0000:00:1c.4: setting latency timer to 64 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS1 at I/O 0x1248 (irq = 17) is a 16550A input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 464k freed SCSI subsystem initialized libata version 3.00 loaded. pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pata_acpi 0000:00:03.2: setting latency timer to 64 pata_acpi 0000:00:03.2: PCI INT C disabled FDC 0 is a National Semiconductor PC87306 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 ahci 0000:00:1f.2: irq 30 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x1f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526100 irq 30 ata2: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526180 irq 30 ata3: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526200 irq 30 ata4: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526280 irq 30 ata5: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526300 irq 30 ata6: DUMMY ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI _SDD failed (AE 0x5) ata2.00: ACPI _SDD failed (AE 0x5) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI _SDD failed (AE 0x5) ata1.00: ACPI: failed the second time, disabled ata1.00: ATA-8: ST3250318AS, HP11, max UDMA/100 ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 ata2.00: ACPI _SDD failed (AE 0x5) ata2.00: ACPI: failed the second time, disabled ata2.00: ATAPI: HL-DT-ST DVD-RAM GH40L, RB02, max UDMA/100 ata2.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST3250318AS HP11 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH40L RB02 PQ: 0 ANSI: 5 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<4>Driver 'sr' needs updating - please use bus_type methods sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 EXT4-fs: barriers enabled EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem sda3 with ordered data mode kjournald2 starting: pid 525, dev sda3:8, commit interval 5 seconds rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs udev: starting version 146 iTCO_vendor_support: vendor-support=0 heci: module is from the staging directory, the quality is unknown, you have been warned. heci: Intel(R) Management Engine Interface - version 5.0.0.31 heci: Copyright (c) 2003 - 2008 Intel Corporation. heci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 heci 0000:00:03.0: setting latency timer to 64 heci: link layer has been established. Uniform Multi-Platform E-IDE driver iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected ACPI: Invalid PBLK length [7] ACPI: SSDT 000000007c9d161e 003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E) ACPI: SSDT 000000007c9d136e 002B0 (v01 COMPAQ CST 00000001 MSFT 0100000E) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Invalid PBLK length [7] ACPI: CPU1 (power states: C1[C1] C2[C2]) processor ACPI_CPU:01: registered as cooling_device1 heci driver initialization successful. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset agpgart-intel 0000:00:00.0: detected 32764K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 ACPI: WMI: Mapper loaded input: PC Speaker as /devices/platform/pcspkr/input/input1 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 ACPI: Power Button [PBTN] sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 tpm_inf_pnp 00:0a: Found TPM with ID IFX0102 tpm_inf_pnp 00:0a: TPM found: config base 0x4e, data base 0xcb0, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 uhci_hcd: USB Universal Host Controller Interface driver ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf0526800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001120 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0526c00 e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4 e1000e: Copyright (c) 1999-2008 Intel Corporation. ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001140 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected e1000e 0000:00:19.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 31 for MSI/MSI-X 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:81:1c:e8:2c 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: ffffff-0ff uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 22, io base 0x00001160 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001180 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 21, io base 0x000011a0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 22, io base 0x000011c0 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb 1-3: new high speed USB device using ehci_hcd and address 2 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:1b.0: setting latency timer to 64 usb 1-3: configuration #1 chosen from 1 choice hub 1-3:1.0: USB hub found hub 1-3:1.0: 2 ports detected usb 1-3.1: new high speed USB device using ehci_hcd and address 3 usb 1-3.1: configuration #1 chosen from 1 choice hub 1-3.1:1.0: USB hub found hub 1-3.1:1.0: 4 ports detected input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4 usb 1-3.2: new full speed USB device using ehci_hcd and address 4 usb 1-3.2: configuration #1 chosen from 1 choice usb 1-3.1.1: new high speed USB device using ehci_hcd and address 5 usbcore: registered new interface driver hiddev input: Hewlett-Packard Company HP USB Smart Card Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input5 generic-usb 0003:03F0:1024.0001: input,hidraw0: USB HID v1.11 Keyboard [Hewlett-Packard Company HP USB Smart Card Keyboard] on usb-0000:00:1a.7-3.2/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver EXT4 FS on sda3, internal journal on sda3:8 usb 1-3.1.1: configuration #1 chosen from 1 choice usb 1-3.1.2: new low speed USB device using ehci_hcd and address 6 usb 1-3.1.2: configuration #1 chosen from 1 choice input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.1/1-3.1.2/1-3.1.2:1.0/input/input6 generic-usb 0003:046D:C018.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.7-3.1.2/input0 Initializing USB Mass Storage driver... scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. EXT4-fs: barriers enabled kjournald2 starting: pid 1062, dev sda4:8, commit interval 5 seconds EXT4 FS on sda4, internal journal on sda4:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem sda4 with ordered data mode Adding 265064k swap on /dev/sda2. Priority:-1 extents:1 across:265064k e1000e 0000:00:19.0: irq 31 for MSI/MSI-X e1000e 0000:00:19.0: irq 31 for MSI/MSI-X NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:02.0: irq 32 for MSI/MSI-X [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 scsi 6:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 sd 6:0:0:0: Attached scsi generic sg2 type 0 sd 6:0:0:0: [sdb] Attached SCSI removable disk scsi 6:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 sd 6:0:0:1: Attached scsi generic sg3 type 0 sd 6:0:0:1: [sdc] Attached SCSI removable disk usb-storage: device scan complete e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0.9: no IPv6 routers present eth0.207: no IPv6 routers present eth0.999: no IPv6 routers present eth0: no IPv6 routers present [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 1 usb 1-3: USB disconnect, address 2 usb 1-3.1: USB disconnect, address 3 usb 1-3.1.1: USB disconnect, address 5 usb 1-3.1.2: USB disconnect, address 6 usb 1-3.2: USB disconnect, address 4 usb 1-3: new high speed USB device using ehci_hcd and address 7 usb 1-3: configuration #1 chosen from 1 choice hub 1-3:1.0: USB hub found hub 1-3:1.0: 2 ports detected usb 1-3.1: new high speed USB device using ehci_hcd and address 8 usb 1-3.1: configuration #1 chosen from 1 choice hub 1-3.1:1.0: USB hub found hub 1-3.1:1.0: 4 ports detected usb 1-3.2: new full speed USB device using ehci_hcd and address 9 usb 1-3.2: configuration #1 chosen from 1 choice input: Hewlett-Packard Company HP USB Smart Card Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input7 generic-usb 0003:03F0:1024.0003: input,hidraw0: USB HID v1.11 Keyboard [Hewlett-Packard Company HP USB Smart Card Keyboard] on usb-0000:00:1a.7-3.2/input0 usb 1-3.1.1: new high speed USB device using ehci_hcd and address 10 usb 1-3.1.1: configuration #1 chosen from 1 choice scsi7 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 10 usb-storage: waiting for device to settle before scanning usb 1-3.1.2: new low speed USB device using ehci_hcd and address 11 usb 1-3.1.2: configuration #1 chosen from 1 choice input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.1/1-3.1.2/1-3.1.2:1.0/input/input8 generic-usb 0003:046D:C018.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.7-3.1.2/input0 scsi 7:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 sd 7:0:0:0: Attached scsi generic sg2 type 0 scsi 7:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 sd 7:0:0:1: Attached scsi generic sg3 type 0 sd 7:0:0:0: [sdb] Attached SCSI removable disk sd 7:0:0:1: [sdc] Attached SCSI removable disk usb-storage: device scan complete usb 1-3: USB disconnect, address 7 usb 1-3.1: USB disconnect, address 8 usb 1-3.1.1: USB disconnect, address 10 usb 1-3.1.2: USB disconnect, address 11 usb 1-3.2: USB disconnect, address 9 usb 1-3: new high speed USB device using ehci_hcd and address 12 usb 1-3: configuration #1 chosen from 1 choice hub 1-3:1.0: USB hub found hub 1-3:1.0: 2 ports detected usb 1-3.1: new high speed USB device using ehci_hcd and address 13 usb 1-3.1: configuration #1 chosen from 1 choice hub 1-3.1:1.0: USB hub found hub 1-3.1:1.0: 4 ports detected usb 1-3.2: new full speed USB device using ehci_hcd and address 14 usb 1-3.2: configuration #1 chosen from 1 choice input: Hewlett-Packard Company HP USB Smart Card Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input9 generic-usb 0003:03F0:1024.0005: input,hidraw0: USB HID v1.11 Keyboard [Hewlett-Packard Company HP USB Smart Card Keyboard] on usb-0000:00:1a.7-3.2/input0 usb 1-3.1.1: new high speed USB device using ehci_hcd and address 15 usb 1-3.1.1: configuration #1 chosen from 1 choice scsi8 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 15 usb-storage: waiting for device to settle before scanning usb 1-3.1.2: new low speed USB device using ehci_hcd and address 16 usb 1-3.1.2: configuration #1 chosen from 1 choice input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.1/1-3.1.2/1-3.1.2:1.0/input/input10 generic-usb 0003:046D:C018.0006: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.7-3.1.2/input0 scsi 8:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0 sd 8:0:0:0: Attached scsi generic sg2 type 0 scsi 8:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0 sd 8:0:0:1: Attached scsi generic sg3 type 0 sd 8:0:0:0: [sdb] Attached SCSI removable disk sd 8:0:0:1: [sdc] Attached SCSI removable disk usb-storage: device scan complete [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 1 mtrr: no MTRR for e0000000,10000000 found [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 1