BIOS EBDA/lowmem at: 0009ec00/0009ec00 Linux version 2.6.28-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sun Jan 18 19:41:52 UTC 2009 Command line: root=/dev/disk/by-uuid/f180eced-2717-4a0e-80df-f6a9d517555f ro KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bff90000 (usable) BIOS-e820: 00000000bff90000 - 00000000bff9e000 (ACPI data) BIOS-e820: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS) BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working it around. last_pfn = 0x140000 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xbff90 max_arch_pfn = 0x3ffffffff Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009ec00 (usable) modified: 000000000009ec00 - 00000000000a0000 (reserved) modified: 00000000000e0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000bff90000 (usable) modified: 00000000bff90000 - 00000000bff9e000 (ACPI data) modified: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS) modified: 00000000bffe0000 - 00000000c0000000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ffb00000 - 0000000100000000 (reserved) modified: 0000000100000000 - 0000000140000000 (usable) init_memory_mapping: 0000000000000000-00000000bff90000 0000000000 - 00bfe00000 page 2M 00bfe00000 - 00bff90000 page 4k kernel direct mapping tables up to bff90000 @ 10000-15000 last_map_addr: bff90000 end: bff90000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ 13000-19000 last_map_addr: 140000000 end: 140000000 RAMDISK: 37e34000 - 37fef09e ACPI: RSDP 000F99B0, 0014 (r0 ACPIAM) ACPI: RSDT BFF90000, 0040 (r1 7519MS A7519200 20080812 MSFT 97) ACPI: FACP BFF90200, 0084 (r1 7519MS A7519200 20080812 MSFT 97) ACPI: DSDT BFF905C0, 6594 (r1 A7519 A7519200 200 INTL 20051117) ACPI: FACS BFF9E000, 0040 ACPI: APIC BFF90390, 006C (r1 7519MS A7519200 20080812 MSFT 97) ACPI: MCFG BFF90400, 003C (r1 7519MS OEMMCFG 20080812 MSFT 97) ACPI: SLIC BFF90440, 0176 (r1 7519MS A7519200 20080812 MSFT 97) ACPI: OEMB BFF9E040, 0072 (r1 7519MS A7519200 20080812 MSFT 97) ACPI: HPET BFF985C0, 0038 (r1 7519MS OEMHPET 20080812 MSFT 97) ACPI: SSDT BFF9EB10, 0A7C (r1 DpgPmm CpuPm 12 INTL 20051117) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 0140000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000734c0c] TEXT DATA BSS ==> [0000200000 - 0000734c0c] #3 [0037e34000 - 0037fef09e] RAMDISK ==> [0037e34000 - 0037fef09e] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] #6 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000] found SMP MP-table at [ffff8800000ff780] 000ff780 [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009e 0: 0x00000100 -> 0x000bff90 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1048350 DMA zone: 56 pages used for memmap DMA zone: 1438 pages reserved DMA zone: 2488 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 767944 pages, LIFO batch:31 Normal zone: 3584 pages used for memmap Normal zone: 258560 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: HPET id: 0xffffffff base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 2 hotplug CPUs PM: Registered nosave memory: 000000000009e000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000bff90000 - 00000000bff9e000 PM: Registered nosave memory: 00000000bff9e000 - 00000000bffe0000 PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000 PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000) PERCPU: Allocating 49152 bytes of per cpu data NR_CPUS: 16, nr_cpu_ids: 4, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1028992 Kernel command line: root=/dev/disk/by-uuid/f180eced-2717-4a0e-80df-f6a9d517555f ro Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Fast TSC calibration using PIT Detected 3007.534 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Scanning for low memory corruption every 60 seconds Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x20000000 - 0x24000000 Memory: 4041148k/5242880k available (2608k kernel code, 1049480k absent, 151304k reserved, 1184k data, 372k init) SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 6017.69 BogoMIPS (lpj=10025113) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20080926 ACPI: Checking initramfs for custom DSDT Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6017.47 BogoMIPS (lpj=10024761) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (12034.17 BogoMIPS). net_namespace: 1384 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0xac00-0xac1f] pci 0000:00:1a.1: reg 20 io port: [0xa880-0xa89f] pci 0000:00:1a.2: reg 20 io port: [0xa800-0xa81f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe8ffc00-0xfe8fffff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe8f8000-0xfe8fbfff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xa480-0xa49f] pci 0000:00:1d.1: reg 20 io port: [0xa400-0xa41f] pci 0000:00:1d.2: reg 20 io port: [0xa080-0xa09f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe8ff800-0xfe8ffbff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007] pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03] pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887] pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803] pci 0000:00:1f.2: reg 20 io port: [0x9480-0x949f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe8ff000-0xfe8ff7ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe8fec00-0xfe8fecff] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 18 64bit mmio: [0xfe9f0000-0xfe9fffff] pci 0000:01:00.0: reg 20 io port: [0xb000-0xb0ff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10 64bit mmio: [0xfe9ec000-0xfe9effff] pci 0000:01:00.1: supports D1 D2 pci 0000:00:01.0: bridge io port: [0xb000-0xbfff] pci 0000:00:01.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:02:00.0: reg 10 io port: [0xcc00-0xcc07] pci 0000:02:00.0: reg 14 io port: [0xc880-0xc883] pci 0000:02:00.0: reg 18 io port: [0xc800-0xc807] pci 0000:02:00.0: reg 1c io port: [0xc480-0xc483] pci 0000:02:00.0: reg 20 io port: [0xc400-0xc40f] pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff] pci 0000:04:00.0: reg 10 io port: [0xd800-0xd8ff] pci 0000:04:00.0: reg 18 64bit mmio: [0xfdfff000-0xfdffffff] pci 0000:04:00.0: reg 20 64bit mmio: [0xfdfe0000-0xfdfeffff] pci 0000:04:00.0: reg 30 32bit mmio: [0xfeaf0000-0xfeafffff] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff] pci 0000:00:1c.5: bridge 32bit mmio: [0xfea00000-0xfeafffff] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] pci 0000:05:00.0: reg 10 io port: [0xe800-0xe8ff] pci 0000:05:00.0: reg 14 32bit mmio: [0xfebffc00-0xfebffcff] pci 0000:05:00.0: reg 30 32bit mmio: [0xfeb80000-0xfebbffff] pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *5) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15) PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved system 00:06: ioport range 0x4c0-0x4ff has been reserved system 00:06: ioport range 0x4d0-0x4d1 has been reserved system 00:06: ioport range 0x800-0x87f has been reserved system 00:06: ioport range 0x480-0x4bf has been reserved system 00:06: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:06: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:06: iomem range 0xfed40000-0xfed8ffff has been reserved system 00:09: iomem range 0xffc00000-0xffefffff has been reserved system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0c: ioport range 0xa00-0xadf has been reserved system 00:0c: ioport range 0xae0-0xaef has been reserved system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved system 00:0e: iomem range 0x0-0x9ffff could not be reserved system 00:0e: iomem range 0xc0000-0xcffff has been reserved system 00:0e: iomem range 0xe0000-0xfffff could not be reserved system 00:0e: iomem range 0x100000-0xbfffffff could not be reserved system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0xb000-0xbfff pci 0000:00:01.0: MEM window: 0xfe900000-0xfe9fffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0xc000-0xcfff pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: disabled pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.5: IO window: 0xd000-0xdfff pci 0000:00:1c.5: MEM window: 0xfea00000-0xfeafffff pci 0000:00:1c.5: PREFETCH window: 0x000000fdf00000-0x000000fdffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 pci 0000:00:1e.0: IO window: 0xe000-0xefff pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff pci 0000:00:1e.0: PREFETCH window: 0x000000c4000000-0x000000c40fffff pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] bus: 01 index 0 io port: [0xb000-0xbfff] bus: 01 index 1 mmio: [0xfe900000-0xfe9fffff] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff] bus: 01 index 3 mmio: [0x0-0x0] bus: 02 index 0 io port: [0xc000-0xcfff] bus: 02 index 1 mmio: [0x0-0x0] bus: 02 index 2 mmio: [0x0-0x0] bus: 02 index 3 mmio: [0x0-0x0] bus: 03 index 0 mmio: [0x0-0x0] bus: 03 index 1 mmio: [0x0-0x0] bus: 03 index 2 mmio: [0x0-0x0] bus: 03 index 3 mmio: [0x0-0x0] bus: 04 index 0 io port: [0xd000-0xdfff] bus: 04 index 1 mmio: [0xfea00000-0xfeafffff] bus: 04 index 2 mmio: [0xfdf00000-0xfdffffff] bus: 04 index 3 mmio: [0x0-0x0] bus: 05 index 0 io port: [0xe000-0xefff] bus: 05 index 1 mmio: [0xfeb00000-0xfebfffff] bus: 05 index 2 mmio: [0xc4000000-0xc40fffff] bus: 05 index 3 io port: [0x00-0xffff] bus: 05 index 4 mmio: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 1772k freed VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7898 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pcieport-driver 0000:00:01.0: irq 767 for MSI/MSI-X pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie03: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pcieport-driver 0000:00:1c.0: irq 766 for MSI/MSI-X pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: found MSI capability pcieport-driver 0000:00:1c.1: irq 765 for MSI/MSI-X pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie02: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service pcieport-driver 0000:00:1c.5: setting latency timer to 64 pcieport-driver 0000:00:1c.5: found MSI capability pcieport-driver 0000:00:1c.5: irq 764 for MSI/MSI-X pci_express 0000:00:1c.5:pcie00: allocate port service pci_express 0000:00:1c.5:pcie02: allocate port service pci_express 0000:00:1c.5:pcie03: allocate port service Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing disabled input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 registered taskstats version 1 Freeing unused kernel memory: 372k freed SCSI subsystem initialized libata version 3.00 loaded. pata_acpi 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_acpi 0000:02:00.0: setting latency timer to 64 pata_acpi 0000:02:00.0: PCI INT A disabled ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: irq 763 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 input: AT Translated Set 2 keyboard as /class/input/input1 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff100 irq 763 ata2: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff180 irq 763 ata3: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff200 irq 763 ata4: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff280 irq 763 ata5: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff300 irq 763 ata6: SATA max UDMA/133 abar m2048@0xfe8ff000 port 0xfe8ff380 irq 763 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: ST3500320AS, SD1A, max UDMA/133 ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133 ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5 scsi 2:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 pata_jmicron 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pata_jmicron 0000:02:00.0: setting latency timer to 64 scsi6 : pata_jmicron scsi7 : pata_jmicron ata7: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 16 ata8: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 16 ata7.01: NODEV after polling detection ata7.00: ATAPI: PHILIPS DVDR1640P, P3.7, max UDMA/33 ata7.00: configured for UDMA/33 scsi 6:0:0:0: CD-ROM PHILIPS DVDR1640P P3.7 PQ: 0 ANSI: 5 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8ffc00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8ff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ac00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000a800 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a480 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a080 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 6:0:0:0: Attached scsi CD-ROM sr0 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 2:0:0:0: [sdb] Attached SCSI disk usb 1-5: new high speed USB device using ehci_hcd and address 3 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com usb 1-5: configuration #1 chosen from 1 choice hub 1-5:1.0: USB hub found hub 1-5:1.0: 4 ports detected usb 4-1: new low speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Cypress Keypad&Remote Control as /class/input/input2 generic-usb 0003:04B4:0102.0001: input,hidraw0: USB HID v1.00 Keyboard [Cypress Keypad&Remote Control] on usb-0000:00:1a.1-1/input0 input: Cypress Keypad&Remote Control as /class/input/input3 generic-usb 0003:04B4:0102.0002: input,hidraw1: USB HID v1.00 Mouse [Cypress Keypad&Remote Control] on usb-0000:00:1a.1-1/input1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver usb 5-2: new full speed USB device using uhci_hcd and address 2 usb 5-2: configuration #1 chosen from 1 choice hub 5-2:1.0: USB hub found hub 5-2:1.0: 4 ports detected usb 6-1: new low speed USB device using uhci_hcd and address 2 usb 6-1: configuration #1 chosen from 1 choice usb 8-1: new full speed USB device using uhci_hcd and address 2 usb 8-1: configuration #1 chosen from 1 choice hub 8-1:1.0: USB hub found hub 8-1:1.0: 3 ports detected usb 5-2.4: new low speed USB device using uhci_hcd and address 3 usb 5-2.4: configuration #1 chosen from 1 choice input: Razer Razer Diamondback 3G as /class/input/input4 generic-usb 0003:1532:000D.0005: input,hidraw2: USB HID v1.10 Mouse [Razer Razer Diamondback 3G] on usb-0000:00:1a.2-2.4/input0 usb 8-1.1: new full speed USB device using uhci_hcd and address 3 usb 8-1.1: configuration #1 chosen from 1 choice input: HID 0a5c:4502 as /class/input/input5 generic-usb 0003:0A5C:4502.0006: input,hidraw3: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1d.2-1.1/input0 usb 8-1.2: new full speed USB device using uhci_hcd and address 4 usb 8-1.2: configuration #1 chosen from 1 choice input: HID 0a5c:4503 as /class/input/input6 generic-usb 0003:0A5C:4503.0007: input,hidraw4: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1d.2-1.2/input0 usb 8-1.3: new full speed USB device using uhci_hcd and address 5 usb 8-1.3: configuration #1 chosen from 1 choice SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem Filesystem "dm-0": Disabling barriers, trial barrier write failed XFS mounting filesystem dm-0 Ending clean XFS mount for filesystem: dm-0 rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:04:00.0: setting latency timer to 64 r8169 0000:04:00.0: irq 762 for MSI/MSI-X eth0: RTL8168c/8111c at 0xffffc20010b16000, 00:21:85:19:f5:43, XID 3c4000c0 IRQ 762 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:01:00.1: setting latency timer to 64 fuse init (API version 7.10) brd: module loaded fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [fglrx] Maximum main memory to use for locked dma buffers: 3787 MBytes. [fglrx] vendor: 1002 device: 9442 count: 1 [fglrx] ioport: bar 4, base 0xb000, size: 0x100 pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:01:00.0: setting latency timer to 64 [fglrx] Kernel PAT support detected, disabling driver built-in PAT support [fglrx] module loaded - fglrx 8.56.4 [Dec 1 2008] with 1 minors loop: module loaded ACPI: SSDT BFF9E0C0, 0277 (r1 DpgPmm P001Ist 11 INTL 20051117) ACPI: SSDT BFF9E5C0, 04B2 (r1 PmRef P001Cst 3001 INTL 20051117) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: SSDT BFF9E340, 0277 (r1 DpgPmm P002Ist 12 INTL 20051117) ACPI: SSDT BFF9EA80, 0085 (r1 PmRef P002Cst 3000 INTL 20051117) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:01: registered as cooling_device1 input: Power Button (FF) as /class/input/input7 Marking TSC unstable due to TSC halts in idle ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input8 ACPI: Power Button (CM) [PWRB] sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 2:0:0:0: Attached scsi generic sg1 type 0 sr 6:0:0:0: Attached scsi generic sg2 type 5 input: HID 046a:0023 as /class/input/input9 iTCO_vendor_support: vendor-support=0 cherry 0003:046A:0023.0003: input,hidraw5: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-1/input0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04 iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected input: HID 046a:0023 as /class/input/input10 Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized cherry 0003:046A:0023.0004: input,hidraw6: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-1/input1 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Bluetooth: HCI USB driver ver 2.10 usbcore: registered new interface driver hci_usb input: PC Speaker as /class/input/input11 Linux Tulip driver version 1.1.15 (Feb 27, 2007) tulip 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 tulip0: MII transceiver #1 config 3000 status 7809 advertising 01e1. eth1: Lite-On 82c168 PNIC rev 32 at Port 0xe800, 00:a0:cc:62:1f:cc, IRQ 16. Error: Driver 'pcspkr' is already registered, aborting... Adding 489940k swap on /dev/sda6. Priority:-1 extents:1 across:489940k r8169: eth0: link up r8169: eth0: link up f71882fg: Not a Fintek device f71882fg: Found F71882FG chip at 0xa00, revision 32 coretemp coretemp.0: Using relative temperature scale! coretemp coretemp.1: Using relative temperature scale! Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.2 mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22) [fglrx] Gart cacheable size:252 M. [fglrx] Reserved FB block: Shared offset:0, size:1000000 [fglrx] Reserved FB block: Unshared offset:ff76000, size:8a000 [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: no IPv6 routers present eth1: no IPv6 routers present